Base de CVEs

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band() Simplify the code by using device managed memory allocations. This also fixes a memory leak in rtw_register_hw(). The supported bands were not freed in the error path. Copied from commit 145df52a8671 ("wifi: rtw89: Convert rtw89_core_set_supported_band to use devm_*").

In the Linux kernel, the following vulnerability has been resolved: most: core: fix resource leak in most_register_interface error paths The function most_register_interface() did not correctly release resources if it failed early (before registering the device). In these cases, it returned an error code immediately, leaking the memory allocated for the interface. Fix this by initializing the device early via device_initialize() and calling put_device() on all error paths. The most_register_interface() is expected to call put_device() on error which frees the resources allocated in the caller. The put_device() either calls release_mdev() or dim2_release(), depending on the caller. Switch to using device_add() instead of device_register() to handle the split initialization.

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Fix memory leak of BO array in hang state The hang state's BO array is allocated separately with kzalloc() in vc4_save_hang_state() but never freed in vc4_free_hang_state(). Add the missing kfree() for the BO array before freeing the hang state struct.

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Fix a memory leak in hang state error path When vc4_save_hang_state() encounters an early return condition, it returns without freeing the previously allocated `kernel_state`, leaking memory. Add the missing kfree() calls by consolidating the early return paths into a single place.

In the Linux kernel, the following vulnerability has been resolved: net: airoha: Fix memory leak in airoha_qdma_rx_process() If an error occurs on the subsequents buffers belonging to the non-linear part of the skb (e.g. due to an error in the payload length reported by the NIC or if we consumed all the available fragments for the skb), the page_pool fragment will not be linked to the skb so it will not return to the pool in the airoha_qdma_rx_process() error path. Fix the memory leak partially reverting commit 'd6d2b0e1538d ("net: airoha: Fix page recycling in airoha_qdma_rx_process()")' and always running page_pool_put_full_page routine in the airoha_qdma_rx_process() error path.

In the Linux kernel, the following vulnerability has been resolved: xfrm_user: fix info leak in build_mapping() struct xfrm_usersa_id has a one-byte padding hole after the proto field, which ends up never getting set to zero before copying out to userspace. Fix that up by zeroing out the whole structure before setting individual variables.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_ll: Fix firmware leak on error path Smatch reports: drivers/bluetooth/hci_ll.c:587 download_firmware() warn: 'fw' from request_firmware() not released on lines: 544. In download_firmware(), if request_firmware() succeeds but the returned firmware content is invalid (no data or zero size), the function returns without releasing the firmware, resulting in a resource leak. Fix this by calling release_firmware() before returning when request_firmware() succeeded but the firmware content is invalid.

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid allocate block from corrupted group in ext4_mb_find_by_goal() There's issue as follows: ... EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2243 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2239 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): error count since last fsck: 1 EXT4-fs (mmcblk0p1): initial error at time 1765597433: ext4_mb_generate_buddy:760 EXT4-fs (mmcblk0p1): last error at time 1765597433: ext4_mb_generate_buddy:760 ... According to the log analysis, blocks are always requested from the corrupted block group. This may happen as follows: ext4_mb_find_by_goal ext4_mb_load_buddy ext4_mb_load_buddy_gfp ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_wait_block_bitmap ext4_validate_block_bitmap if (!grp || EXT4_MB_GRP_BBITMAP_CORRUPT(grp)) return -EFSCORRUPTED; // There's no logs. if (err) return err; // Will return error ext4_lock_group(ac->ac_sb, group); if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) // Unreachable goto out; After commit 9008a58e5dce ("ext4: make the bitmap read routines return real error codes") merged, Commit 163a203ddb36 ("ext4: mark block group as corrupt on block bitmap error") is no real solution for allocating blocks from corrupted block groups. This is because if 'EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)' is true, then 'ext4_mb_load_buddy()' may return an error. This means that the block allocation will fail. Therefore, check block group if corrupted when ext4_mb_load_buddy() returns error.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix iloc.bh leak in ext4_fc_replay_inode() error paths During code review, Joseph found that ext4_fc_replay_inode() calls ext4_get_fc_inode_loc() to get the inode location, which holds a reference to iloc.bh that must be released via brelse(). However, several error paths jump to the 'out' label without releasing iloc.bh: - ext4_handle_dirty_metadata() failure - sync_dirty_buffer() failure - ext4_mark_inode_used() failure - ext4_iget() failure Fix this by introducing an 'out_brelse' label placed just before the existing 'out' label to ensure iloc.bh is always released. Additionally, make ext4_fc_replay_inode() propagate errors properly instead of always returning 0.

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: replace qrtr_tx_flow radix_tree with xarray to fix memory leak __radix_tree_create() allocates and links intermediate nodes into the tree one by one. If a subsequent allocation fails, the already-linked nodes remain in the tree with no corresponding leaf entry. These orphaned internal nodes are never reclaimed because radix_tree_for_each_slot() only visits slots containing leaf values. The radix_tree API is deprecated in favor of xarray. As suggested by Matthew Wilcox, migrate qrtr_tx_flow from radix_tree to xarray instead of fixing the radix_tree itself [1]. xarray properly handles cleanup of internal nodes — xa_destroy() frees all internal xarray nodes when the qrtr_node is released, preventing the leak. [1] https://lore.kernel.org/all/20260225071623.41275-1-jiayuan.chen@linux.dev/T/

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix leaks when hci_cmd_sync_queue_once fails When hci_cmd_sync_queue_once() returns with error, the destroy callback will not be called. Fix leaking references / memory on these failures.

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050: Fix irq resource leak The interrupt handler is setup but only a few lines down if iio_trigger_register() fails the function returns without properly releasing the handler. Add cleanup goto to resolve resource leak. Detected by Smatch: drivers/iio/gyro/mpu3050-core.c:1128 mpu3050_trigger_probe() warn: 'irq' from request_threaded_irq() not released on lines: 1124.

In the Linux kernel, the following vulnerability has been resolved: gpib: lpvo_usb: fix memory leak on disconnect The driver iterates over the registered USB interfaces during GPIB attach and takes a reference to their USB devices until a match is found. These references are never released which leads to a memory leak when devices are disconnected. Fix the leak by dropping the unnecessary references.

In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: Fix URB memory leak on submit failure When usb_submit_urb() fails in usbio_probe(), the previously allocated URB is never freed, causing a memory leak. Fix this by jumping to err_free_urb label to properly release the URB on the error path.

In the Linux kernel, the following vulnerability has been resolved: comedi: runflags cannot determine whether to reclaim chanlist syzbot reported a memory leak [1], because commit 4e1da516debb ("comedi: Add reference counting for Comedi command handling") did not consider the exceptional exit case in do_cmd_ioctl() where runflags is not set. This caused chanlist not to be properly freed by do_become_nonbusy(), as it only frees chanlist when runflags is correctly set. Added a check in do_become_nonbusy() for the case where runflags is not set, to properly free the chanlist memory. [1] BUG: memory leak backtrace (crc 844a0efa): __comedi_get_user_chanlist drivers/comedi/comedi_fops.c:1815 [inline] do_cmd_ioctl.part.0+0x112/0x350 drivers/comedi/comedi_fops.c:1890 do_cmd_ioctl drivers/comedi/comedi_fops.c:1858 [inline]

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix memory leak with CCA cards used as accelerator Tests showed that there is a memory leak if CCA cards are used as accelerator for clear key RSA requests (ME and CRT). With the last rework for the memory allocation the AP messages are allocated by ap_init_apmsg() but for some reason on two places (ME and CRT) the older allocation was still in place. So the first allocation simple was never freed.

In the Linux kernel, the following vulnerability has been resolved: gpio: Fix resource leaks on errors in gpiochip_add_data_with_key() Since commit aab5c6f20023 ("gpio: set device type for GPIO chips"), `gdev->dev.release` is unset. As a result, the reference count to `gdev->dev` isn't dropped on the error handling paths. Drop the reference on errors. Also reorder the instructions to make the error handling simpler. Now gpiochip_add_data_with_key() roughly looks like: >>> Some memory allocation. Go to ERR ZONE 1 on errors. >>> device_initialize(). gpiodev_release() takes over the responsibility for freeing the resources of `gdev->dev`. The subsequent error handling paths shouldn't go through ERR ZONE 1 again which leads to double free. >>> Some initialization mainly on `gdev`. >>> The rest of initialization. Go to ERR ZONE 2 on errors. >>> Chip registration success and exit. >>> ERR ZONE 2. gpio_device_put() and exit. >>> ERR ZONE 1.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid memory leak in f2fs_rename() syzbot reported a f2fs bug as below: BUG: memory leak unreferenced object 0xffff888127f70830 (size 16): comm "syz.0.23", pid 6144, jiffies 4294943712 hex dump (first 16 bytes): 3c af 57 72 5b e6 8f ad 6e 8e fd 33 42 39 03 ff <.Wr[...n..3B9.. backtrace (crc 925f8a80): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4520 [inline] slab_alloc_node mm/slub.c:4844 [inline] __do_kmalloc_node mm/slub.c:5237 [inline] __kmalloc_noprof+0x3bd/0x560 mm/slub.c:5250 kmalloc_noprof include/linux/slab.h:954 [inline] fscrypt_setup_filename+0x15e/0x3b0 fs/crypto/fname.c:364 f2fs_setup_filename+0x52/0xb0 fs/f2fs/dir.c:143 f2fs_rename+0x159/0xca0 fs/f2fs/namei.c:961 f2fs_rename2+0xd5/0xf20 fs/f2fs/namei.c:1308 vfs_rename+0x7ff/0x1250 fs/namei.c:6026 filename_renameat2+0x4f4/0x660 fs/namei.c:6144 __do_sys_renameat2 fs/namei.c:6173 [inline] __se_sys_renameat2 fs/namei.c:6168 [inline] __x64_sys_renameat2+0x59/0x80 fs/namei.c:6168 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f The root cause is in commit 40b2d55e0452 ("f2fs: fix to create selinux label during whiteout initialization"), we added a call to f2fs_setup_filename() without a matching call to f2fs_free_filename(), fix it.

In the Linux kernel, the following vulnerability has been resolved: wifi: rt2x00usb: fix devres lifetime USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes). Fix the USB anchor lifetime so that it is released on driver unbind.

In the Linux kernel, the following vulnerability has been resolved: xfrm_user: fix info leak in build_report() struct xfrm_user_report is a __u8 proto field followed by a struct xfrm_selector which means there is three "empty" bytes of padding, but the padding is never zeroed before copying to userspace. Fix that up by zeroing the structure before setting individual member variables.

In the Linux kernel, the following vulnerability has been resolved: net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit() When dma_map_single() fails in tse_start_xmit(), the function returns NETDEV_TX_OK without freeing the skb. Since NETDEV_TX_OK tells the stack the packet was consumed, the skb is never freed, leaking memory on every DMA mapping failure. Add dev_kfree_skb_any() before returning to properly free the skb.