Base de CVEs

saitoha libsixel until v1.8.7 was discovered to contain a memory leak via the component malloc_stub.c.

In the Linux kernel, the following vulnerability has been resolved: smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection() On kthread_run() failure in ksmbd_tcp_new_connection(), the transport is freed via free_transport(), which does not decrement active_num_conn, leaking this counter. Replace free_transport() with ksmbd_tcp_disconnect().

In the Linux kernel, the following vulnerability has been resolved: smb/client: fix memory leak in smb2_open_file() Reproducer: 1. server: directories are exported read-only 2. client: mount -t cifs //${server_ip}/export /mnt 3. client: dd if=/dev/zero of=/mnt/file bs=512 count=1000 oflag=direct 4. client: umount /mnt 5. client: sleep 1 6. client: modprobe -r cifs The error message is as follows: ============================================================================= BUG cifs_small_rq (Not tainted): Objects remaining on __kmem_cache_shutdown() ----------------------------------------------------------------------------- Object 0x00000000d47521be @offset=14336 ... WARNING: mm/slub.c:1251 at __kmem_cache_shutdown+0x34e/0x440, CPU#0: modprobe/1577 ... Call Trace: <TASK> kmem_cache_destroy+0x94/0x190 cifs_destroy_request_bufs+0x3e/0x50 [cifs] cleanup_module+0x4e/0x540 [cifs] __se_sys_delete_module+0x278/0x400 __x64_sys_delete_module+0x5f/0x70 x64_sys_call+0x2299/0x2ff0 do_syscall_64+0x89/0x350 entry_SYSCALL_64_after_hwframe+0x76/0x7e ... kmem_cache_destroy cifs_small_rq: Slab cache still has objects when called from cifs_destroy_request_bufs+0x3e/0x50 [cifs] WARNING: mm/slab_common.c:532 at kmem_cache_destroy+0x16b/0x190, CPU#0: modprobe/1577

In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: fix memory leak in acp3x pdm dma ops

In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: fix potential skb->frags overflow in RX path When receiving data in the DPMAIF RX path, the t7xx_dpmaif_set_frag_to_skb() function adds page fragments to an skb without checking if the number of fragments has exceeded MAX_SKB_FRAGS. This could lead to a buffer overflow in skb_shinfo(skb)->frags[] array, corrupting adjacent memory and potentially causing kernel crashes or other undefined behavior. This issue was identified through static code analysis by comparing with a similar vulnerability fixed in the mt76 driver commit b102f0c522cf ("mt76: fix array overflow on receiving too many fragments for a packet"). The vulnerability could be triggered if the modem firmware sends packets with excessive fragments. While under normal protocol conditions (MTU 3080 bytes, BAT buffer 3584 bytes), a single packet should not require additional fragments, the kernel should not blindly trust firmware behavior. Malicious, buggy, or compromised firmware could potentially craft packets with more fragments than the kernel expects. Fix this by adding a bounds check before calling skb_add_rx_frag() to ensure nr_frags does not exceed MAX_SKB_FRAGS. The check must be performed before unmapping to avoid a page leak and double DMA unmap during device teardown.

In the Linux kernel, the following vulnerability has been resolved: drm/imx/tve: fix probe device leak Make sure to drop the reference taken to the DDC device during probe on probe failure (e.g. probe deferral) and on driver unbind.

In the Linux kernel, the following vulnerability has been resolved: rocker: fix memory leak in rocker_world_port_post_fini() In rocker_world_port_pre_init(), rocker_port->wpriv is allocated with kzalloc(wops->port_priv_size, GFP_KERNEL). However, in rocker_world_port_post_fini(), the memory is only freed when wops->port_post_fini callback is set: if (!wops->port_post_fini) return; wops->port_post_fini(rocker_port); kfree(rocker_port->wpriv); Since rocker_ofdpa_ops does not implement port_post_fini callback (it is NULL), the wpriv memory allocated for each port is never freed when ports are removed. This leads to a memory leak of sizeof(struct ofdpa_port) bytes per port on every device removal. Fix this by always calling kfree(rocker_port->wpriv) regardless of whether the port_post_fini callback exists.

In the Linux kernel, the following vulnerability has been resolved: octeon_ep: Fix memory leak in octep_device_setup() In octep_device_setup(), if octep_ctrl_net_init() fails, the function returns directly without unmapping the mapped resources and freeing the allocated configuration memory. Fix this by jumping to the unsupported_dev label, which performs the necessary cleanup. This aligns with the error handling logic of other paths in this function. Compile tested only. Issue found using a prototype static analysis tool and code review.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix memory leak in set_ssp_complete Fix memory leak in set_ssp_complete() where mgmt_pending_cmd structures are not freed after being removed from the pending list. Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") replaced mgmt_pending_foreach() calls with individual command handling but missed adding mgmt_pending_free() calls in both error and success paths of set_ssp_complete(). Other completion functions like set_le_complete() were fixed correctly in the same commit. This causes a memory leak of the mgmt_pending_cmd structure and its associated parameter data for each SSP command that completes. Add the missing mgmt_pending_free(cmd) calls in both code paths to fix the memory leak. Also fix the same issue in set_advertising_complete().

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix memleak in nfc_llcp_send_ui_frame(). syzbot reported various memory leaks related to NFC, struct nfc_llcp_sock, sk_buff, nfc_dev, etc. [0] The leading log hinted that nfc_llcp_send_ui_frame() failed to allocate skb due to sock_error(sk) being -ENXIO. ENXIO is set by nfc_llcp_socket_release() when struct nfc_llcp_local is destroyed by local_cleanup(). The problem is that there is no synchronisation between nfc_llcp_send_ui_frame() and local_cleanup(), and skb could be put into local->tx_queue after it was purged in local_cleanup(): CPU1 CPU2 ---- ---- nfc_llcp_send_ui_frame() local_cleanup() |- do { ' |- pdu = nfc_alloc_send_skb(..., &err) | . | |- nfc_llcp_socket_release(local, false, ENXIO); | |- skb_queue_purge(&local->tx_queue); | | ' | |- skb_queue_tail(&local->tx_queue, pdu); | ... | |- pdu = nfc_alloc_send_skb(..., &err) | ^._________________________________.' local_cleanup() is called for struct nfc_llcp_local only after nfc_llcp_remove_local() unlinks it from llcp_devices. If we hold local->tx_queue.lock then, we can synchronise the thread and nfc_llcp_send_ui_frame(). Let's do that and check list_empty(&local->list) before queuing skb to local->tx_queue in nfc_llcp_send_ui_frame(). [0]: [ 56.074943][ T6096] llcp: nfc_llcp_send_ui_frame: Could not allocate PDU (error=-6) [ 64.318868][ T5813] kmemleak: 6 new suspected memory leaks (see /sys/kernel/debug/kmemleak) BUG: memory leak unreferenced object 0xffff8881272f6800 (size 1024): comm "syz.0.17", pid 6096, jiffies 4294942766 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 27 00 03 40 00 00 00 00 00 00 00 00 00 00 00 00 '..@............ backtrace (crc da58d84d): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4979 [inline] slab_alloc_node mm/slub.c:5284 [inline] __do_kmalloc_node mm/slub.c:5645 [inline] __kmalloc_noprof+0x3e3/0x6b0 mm/slub.c:5658 kmalloc_noprof include/linux/slab.h:961 [inline] sk_prot_alloc+0x11a/0x1b0 net/core/sock.c:2239 sk_alloc+0x36/0x360 net/core/sock.c:2295 nfc_llcp_sock_alloc+0x37/0x130 net/nfc/llcp_sock.c:979 llcp_sock_create+0x71/0xd0 net/nfc/llcp_sock.c:1044 nfc_sock_create+0xc9/0xf0 net/nfc/af_nfc.c:31 __sock_create+0x1a9/0x340 net/socket.c:1605 sock_create net/socket.c:1663 [inline] __sys_socket_create net/socket.c:1700 [inline] __sys_socket+0xb9/0x1a0 net/socket.c:1747 __do_sys_socket net/socket.c:1761 [inline] __se_sys_socket net/socket.c:1759 [inline] __x64_sys_socket+0x1b/0x30 net/socket.c:1759 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f BUG: memory leak unreferenced object 0xffff88810fbd9800 (size 240): comm "syz.0.17", pid 6096, jiffies 4294942850 hex dump (first 32 bytes): 68 f0 ff 08 81 88 ff ff 68 f0 ff 08 81 88 ff ff h.......h....... 00 00 00 00 00 00 00 00 00 68 2f 27 81 88 ff ff .........h/'.... backtrace (crc 6cc652b1): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4979 [inline] slab_alloc_node mm/slub.c:5284 [inline] kmem_cache_alloc_node_noprof+0x36f/0x5e0 mm/slub.c:5336 __alloc_skb+0x203/0x240 net/core/skbuff.c:660 alloc_skb include/linux/skbuff.h:1383 [inline] alloc_skb_with_frags+0x69/0x3f0 net/core/sk ---truncated---

In the Linux kernel, the following vulnerability has been resolved: btrfs: zlib: fix the folio leak on S390 hardware acceleration [BUG] After commit aa60fe12b4f4 ("btrfs: zlib: refactor S390x HW acceleration buffer preparation"), we no longer release the folio of the page cache of folio returned by btrfs_compress_filemap_get_folio() for S390 hardware acceleration path. [CAUSE] Before that commit, we call kumap_local() and folio_put() after handling each folio. Although the timing is not ideal (it release previous folio at the beginning of the loop, and rely on some extra cleanup out of the loop), it at least handles the folio release correctly. Meanwhile the refactored code is easier to read, it lacks the call to release the filemap folio. [FIX] Add the missing folio_put() for copy_data_into_buffer().

In the Linux kernel, the following vulnerability has been resolved: ext4: fix iloc.bh leak in ext4_xattr_inode_update_ref The error branch for ext4_xattr_inode_update_ref forget to release the refcount for iloc.bh. Find this when review code.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: cleanup attrs subdirs on context dir setup failure When a context DAMON sysfs directory setup is failed after setup of attrs/ directory, subdirectories of attrs/ directory are not cleaned up. As a result, DAMON sysfs interface is nearly broken until the system reboots, and the memory for the unremoved directory is leaked. Cleanup the directories under such failures.

In the Linux kernel, the following vulnerability has been resolved: of: unittest: Fix memory leak in unittest_data_add() In unittest_data_add(), if of_resolve_phandles() fails, the allocated unittest_data is not freed, leading to a memory leak. Fix this by using scope-based cleanup helper __free(kfree) for automatic resource cleanup. This ensures unittest_data is automatically freed when it goes out of scope in error paths. For the success path, use retain_and_null_ptr() to transfer ownership of the memory to the device tree and prevent double freeing.

webtransport-go is an implementation of the WebTransport protocol. Prior to 0.10.0, an attacker can cause unbounded memory consumption repeatedly creating and closing many WebTransport streams. Closed streams were not removed from an internal session map, preventing garbage collection of their resources. This vulnerability is fixed in v0.10.0.

A vulnerability has been found in wasm3 up to 0.5.0. The affected element is the function NewCodePage. The manipulation leads to memory leak. The attack must be carried out locally. The exploit has been disclosed to the public and may be used. Unfortunately, the project has no active maintainer at the moment.

In the Linux kernel, the following vulnerability has been resolved: can: usb_8dev: usb_8dev_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In usb_8dev_open() -> usb_8dev_start(), the URBs for USB-in transfers are allocated, added to the priv->rx_submitted anchor and submitted. In the complete callback usb_8dev_read_bulk_callback(), the URBs are processed and resubmitted. In usb_8dev_close() -> unlink_all_urbs() the URBs are freed by calling usb_kill_anchored_urbs(&priv->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in usb_kill_anchored_urbs(). Fix the memory leak by anchoring the URB in the usb_8dev_read_bulk_callback() to the priv->rx_submitted anchor.

In the Linux kernel, the following vulnerability has been resolved: gue: Fix skb memleak with inner IP protocol 0. syzbot reported skb memleak below. [0] The repro generated a GUE packet with its inner protocol 0. gue_udp_recv() returns -guehdr->proto_ctype for "resubmit" in ip_protocol_deliver_rcu(), but this only works with non-zero protocol number. Let's drop such packets. Note that 0 is a valid number (IPv6 Hop-by-Hop Option). I think it is not practical to encap HOPOPT in GUE, so once someone starts to complain, we could pass down a resubmit flag pointer to distinguish two zeros from the upper layer: * no error * resubmit HOPOPT [0] BUG: memory leak unreferenced object 0xffff888109695a00 (size 240): comm "syz.0.17", pid 6088, jiffies 4294943096 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 40 c2 10 81 88 ff ff 00 00 00 00 00 00 00 00 .@.............. backtrace (crc a84b336f): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4958 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_noprof+0x3b4/0x590 mm/slub.c:5270 __build_skb+0x23/0x60 net/core/skbuff.c:474 build_skb+0x20/0x190 net/core/skbuff.c:490 __tun_build_skb drivers/net/tun.c:1541 [inline] tun_build_skb+0x4a1/0xa40 drivers/net/tun.c:1636 tun_get_user+0xc12/0x2030 drivers/net/tun.c:1770 tun_chr_write_iter+0x71/0x120 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x45d/0x710 fs/read_write.c:686 ksys_write+0xa7/0x170 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: intel_th: fix device leak on output open() Make sure to drop the reference taken when looking up the th device during output device open() on errors and on close(). Note that a recent commit fixed the leak in a couple of open() error paths but not all of them, and the reference is still leaking on successful open().

In the Linux kernel, the following vulnerability has been resolved: scsi: xen: scsiback: Fix potential memory leak in scsiback_remove() Memory allocated for struct vscsiblk_info in scsiback_probe() is not freed in scsiback_remove() leading to potential memory leaks on remove, as well as in the scsiback_probe() error paths. Fix that by freeing it in scsiback_remove().

In the Linux kernel, the following vulnerability has been resolved: can: mcba_usb: mcba_usb_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In mcba_usb_probe() -> mcba_usb_start(), the URBs for USB-in transfers are allocated, added to the priv->rx_submitted anchor and submitted. In the complete callback mcba_usb_read_bulk_callback(), the URBs are processed and resubmitted. In mcba_usb_close() -> mcba_urb_unlink() the URBs are freed by calling usb_kill_anchored_urbs(&priv->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in usb_kill_anchored_urbs(). Fix the memory leak by anchoring the URB in the mcba_usb_read_bulk_callback()to the priv->rx_submitted anchor.

In the Linux kernel, the following vulnerability has been resolved: gpio: cdev: Fix resource leaks on errors in lineinfo_changed_notify() On error handling paths, lineinfo_changed_notify() doesn't free the allocated resources which results leaks. Fix it.

In the Linux kernel, the following vulnerability has been resolved: can: esd_usb: esd_usb_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In esd_usb_open(), the URBs for USB-in transfers are allocated, added to the dev->rx_submitted anchor and submitted. In the complete callback esd_usb_read_bulk_callback(), the URBs are processed and resubmitted. In esd_usb_close() the URBs are freed by calling usb_kill_anchored_urbs(&dev->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in esd_usb_close(). Fix the memory leak by anchoring the URB in the esd_usb_read_bulk_callback() to the dev->rx_submitted anchor.

In the Linux kernel, the following vulnerability has been resolved: l2tp: Fix memleak in l2tp_udp_encap_recv(). syzbot reported memleak of struct l2tp_session, l2tp_tunnel, sock, etc. [0] The cited commit moved down the validation of the protocol version in l2tp_udp_encap_recv(). The new place requires an extra error handling to avoid the memleak. Let's call l2tp_session_put() there. [0]: BUG: memory leak unreferenced object 0xffff88810a290200 (size 512): comm "syz.0.17", pid 6086, jiffies 4294944299 hex dump (first 32 bytes): 7d eb 04 0c 00 00 00 00 01 00 00 00 00 00 00 00 }............... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc babb6a4f): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4958 [inline] slab_alloc_node mm/slub.c:5263 [inline] __do_kmalloc_node mm/slub.c:5656 [inline] __kmalloc_noprof+0x3e0/0x660 mm/slub.c:5669 kmalloc_noprof include/linux/slab.h:961 [inline] kzalloc_noprof include/linux/slab.h:1094 [inline] l2tp_session_create+0x3a/0x3b0 net/l2tp/l2tp_core.c:1778 pppol2tp_connect+0x48b/0x920 net/l2tp/l2tp_ppp.c:755 __sys_connect_file+0x7a/0xb0 net/socket.c:2089 __sys_connect+0xde/0x110 net/socket.c:2108 __do_sys_connect net/socket.c:2114 [inline] __se_sys_connect net/socket.c:2111 [inline] __x64_sys_connect+0x1c/0x30 net/socket.c:2111 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: Fix memory leak in wbrf_record() The tmp buffer is allocated using kcalloc() but is not freed if acpi_evaluate_dsm() fails. This causes a memory leak in the error path. Fix this by explicitly freeing the tmp buffer in the error handling path of acpi_evaluate_dsm().