Base de CVEs

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Use scratch field in MMIO fragment to hold small write values When exiting to userspace to service an emulated MMIO write, copy the to-be-written value to a scratch field in the MMIO fragment if the size of the data payload is 8 bytes or less, i.e. can fit in a single chunk, instead of pointing the fragment directly at the source value. This fixes a class of use-after-free bugs that occur when the emulator initiates a write using an on-stack, local variable as the source, the write splits a page boundary, *and* both pages are MMIO pages. Because KVM's ABI only allows for physically contiguous MMIO requests, accesses that split MMIO pages are separated into two fragments, and are sent to userspace one at a time. When KVM attempts to complete userspace MMIO in response to KVM_RUN after the first fragment, KVM will detect the second fragment and generate a second userspace exit, and reference the on-stack variable. The issue is most visible if the second KVM_RUN is performed by a separate task, in which case the stack of the initiating task can show up as truly freed data. ================================================================== BUG: KASAN: use-after-free in complete_emulated_mmio+0x305/0x420 Read of size 1 at addr ffff888009c378d1 by task syz-executor417/984 CPU: 1 PID: 984 Comm: syz-executor417 Not tainted 5.10.0-182.0.0.95.h2627.eulerosv2r13.x86_64 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0xbe/0xfd print_address_description.constprop.0+0x19/0x170 __kasan_report.cold+0x6c/0x84 kasan_report+0x3a/0x50 check_memory_region+0xfd/0x1f0 memcpy+0x20/0x60 complete_emulated_mmio+0x305/0x420 kvm_arch_vcpu_ioctl_run+0x63f/0x6d0 kvm_vcpu_ioctl+0x413/0xb20 __se_sys_ioctl+0x111/0x160 do_syscall_64+0x30/0x40 entry_SYSCALL_64_after_hwframe+0x67/0xd1 RIP: 0033:0x42477d Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007faa8e6890e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000004d7338 RCX: 000000000042477d RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000005 RBP: 00000000004d7330 R08: 00007fff28d546df R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d733c R13: 0000000000000000 R14: 000000000040a200 R15: 00007fff28d54720 The buggy address belongs to the page: page:0000000029f6a428 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9c37 flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff) raw: 000fffffc0000000 0000000000000000 ffffea0000270dc8 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888009c37780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888009c37800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff888009c37880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff888009c37900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888009c37980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== The bug can also be reproduced with a targeted KVM-Unit-Test by hacking KVM to fill a large on-stack variable in complete_emulated_mmio(), i.e. by overwrite the data value with garbage. Limit the use of the scratch fields to 8-byte or smaller accesses, and to just writes, as larger accesses and reads are not affected thanks to implementation details in the emulator, but add a sanity check to ensure those details don't change in the future. Specifically, KVM never uses on-stack variables for accesses larger that 8 bytes, e.g. uses an operand in the emulator context, and *al ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: q6apm: move component registration to unmanaged version q6apm component registers dais dynamically from ASoC toplology, which are allocated using device managed version apis. Allocating both component and dynamic dais using managed version could lead to incorrect free ordering, dai will be freed while component still holding references to it. Fix this issue by moving component to unmanged version so that the dai pointers are only freeded after the component is removed. ================================================================== BUG: KASAN: slab-use-after-free in snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core] Read of size 8 at addr ffff00084493a6e8 by task kworker/u48:0/3426 Tainted: [W]=WARN Hardware name: LENOVO 21N2ZC5PUS/21N2ZC5PUS, BIOS N42ET57W (1.31 ) 08/08/2024 Workqueue: pdr_notifier_wq pdr_notifier_work [pdr_interface] Call trace: show_stack+0x28/0x7c (C) dump_stack_lvl+0x60/0x80 print_report+0x160/0x4b4 kasan_report+0xac/0xfc __asan_report_load8_noabort+0x20/0x34 snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core] snd_soc_unregister_component_by_driver+0x50/0x88 [snd_soc_core] devm_component_release+0x30/0x5c [snd_soc_core] devres_release_all+0x13c/0x210 device_unbind_cleanup+0x20/0x190 device_release_driver_internal+0x350/0x468 device_release_driver+0x18/0x30 bus_remove_device+0x1a0/0x35c device_del+0x314/0x7f0 device_unregister+0x20/0xbc apr_remove_device+0x5c/0x7c [apr] device_for_each_child+0xd8/0x160 apr_pd_status+0x7c/0xa8 [apr] pdr_notifier_work+0x114/0x240 [pdr_interface] process_one_work+0x500/0xb70 worker_thread+0x630/0xfb0 kthread+0x370/0x6c0 ret_from_fork+0x10/0x20 Allocated by task 77: kasan_save_stack+0x40/0x68 kasan_save_track+0x20/0x40 kasan_save_alloc_info+0x44/0x58 __kasan_kmalloc+0xbc/0xdc __kmalloc_node_track_caller_noprof+0x1f4/0x620 devm_kmalloc+0x7c/0x1c8 snd_soc_register_dai+0x50/0x4f0 [snd_soc_core] soc_tplg_pcm_elems_load+0x55c/0x1eb8 [snd_soc_core] snd_soc_tplg_component_load+0x4f8/0xb60 [snd_soc_core] audioreach_tplg_init+0x124/0x1fc [snd_q6apm] q6apm_audio_probe+0x10/0x1c [snd_q6apm] snd_soc_component_probe+0x5c/0x118 [snd_soc_core] soc_probe_component+0x44c/0xaf0 [snd_soc_core] snd_soc_bind_card+0xad0/0x2370 [snd_soc_core] snd_soc_register_card+0x3b0/0x4c0 [snd_soc_core] devm_snd_soc_register_card+0x50/0xc8 [snd_soc_core] x1e80100_platform_probe+0x208/0x368 [snd_soc_x1e80100] platform_probe+0xc0/0x188 really_probe+0x188/0x804 __driver_probe_device+0x158/0x358 driver_probe_device+0x60/0x190 __device_attach_driver+0x16c/0x2a8 bus_for_each_drv+0x100/0x194 __device_attach+0x174/0x380 device_initial_probe+0x14/0x20 bus_probe_device+0x124/0x154 deferred_probe_work_func+0x140/0x220 process_one_work+0x500/0xb70 worker_thread+0x630/0xfb0 kthread+0x370/0x6c0 ret_from_fork+0x10/0x20 Freed by task 3426: kasan_save_stack+0x40/0x68 kasan_save_track+0x20/0x40 __kasan_save_free_info+0x4c/0x80 __kasan_slab_free+0x78/0xa0 kfree+0x100/0x4a4 devres_release_all+0x144/0x210 device_unbind_cleanup+0x20/0x190 device_release_driver_internal+0x350/0x468 device_release_driver+0x18/0x30 bus_remove_device+0x1a0/0x35c device_del+0x314/0x7f0 device_unregister+0x20/0xbc apr_remove_device+0x5c/0x7c [apr] device_for_each_child+0xd8/0x160 apr_pd_status+0x7c/0xa8 [apr] pdr_notifier_work+0x114/0x240 [pdr_interface] process_one_work+0x500/0xb70 worker_thread+0x630/0xfb0 kthread+0x370/0x6c0 ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: mm: blk-cgroup: fix use-after-free in cgwb_release_workfn() cgwb_release_workfn() calls css_put(wb->blkcg_css) and then later accesses wb->blkcg_css again via blkcg_unpin_online(). If css_put() drops the last reference, the blkcg can be freed asynchronously (css_free_rwork_fn -> blkcg_css_free -> kfree) before blkcg_unpin_online() dereferences the pointer to access blkcg->online_pin, resulting in a use-after-free: BUG: KASAN: slab-use-after-free in blkcg_unpin_online (./include/linux/instrumented.h:112 ./include/linux/atomic/atomic-instrumented.h:400 ./include/linux/refcount.h:389 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 block/blk-cgroup.c:1367) Write of size 4 at addr ff11000117aa6160 by task kworker/71:1/531 Workqueue: cgwb_release cgwb_release_workfn Call Trace: <TASK> blkcg_unpin_online (./include/linux/instrumented.h:112 ./include/linux/atomic/atomic-instrumented.h:400 ./include/linux/refcount.h:389 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 block/blk-cgroup.c:1367) cgwb_release_workfn (mm/backing-dev.c:629) process_scheduled_works (kernel/workqueue.c:3278 kernel/workqueue.c:3385) Freed by task 1016: kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6246 mm/slub.c:6561) css_free_rwork_fn (kernel/cgroup/cgroup.c:5542) process_scheduled_works (kernel/workqueue.c:3302 kernel/workqueue.c:3385) ** Stack based on commit 66672af7a095 ("Add linux-next specific files for 20260410") I am seeing this crash sporadically in Meta fleet across multiple kernel versions. A full reproducer is available at: https://github.com/leitao/debug/blob/main/reproducers/repro_blkcg_uaf.sh (The race window is narrow. To make it easily reproducible, inject a msleep(100) between css_put() and blkcg_unpin_online() in cgwb_release_workfn(). With that delay and a KASAN-enabled kernel, the reproducer triggers the splat reliably in less than a second.) Fix this by moving blkcg_unpin_online() before css_put(), so the cgwb's CSS reference keeps the blkcg alive while blkcg_unpin_online() accesses it.

In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: fix use-after-free in encoder release path The fops_vcodec_release() function frees the context structure (ctx) without first cancelling any pending or running work in ctx->encode_work. This creates a race window where the workqueue handler (mtk_venc_worker) may still be accessing the context memory after it has been freed. Race condition: CPU 0 (release path) CPU 1 (workqueue) --------------------- ------------------ fops_vcodec_release() v4l2_m2m_ctx_release() v4l2_m2m_cancel_job() // waits for m2m job "done" mtk_venc_worker() v4l2_m2m_job_finish() // m2m job "done" // BUT worker still running! // post-job_finish access: other ctx dereferences // UAF if ctx already freed // returns (job "done") kfree(ctx) // ctx freed Root cause: The v4l2_m2m_ctx_release() only waits for the m2m job lifecycle (via TRANS_RUNNING flag), not the workqueue lifecycle. After v4l2_m2m_job_finish() is called, the m2m framework considers the job complete and v4l2_m2m_ctx_release() returns, but the worker function continues executing and may still access ctx. The work is queued during encode operations via: queue_work(ctx->dev->encode_workqueue, &ctx->encode_work) The worker function accesses ctx->m2m_ctx, ctx->dev, and other ctx fields even after calling v4l2_m2m_job_finish(). This vulnerability was confirmed with KASAN by running an instrumented test module that widens the post-job_finish race window. KASAN detected: BUG: KASAN: slab-use-after-free in mtk_venc_worker+0x159/0x180 Read of size 4 at addr ffff88800326e000 by task kworker/u8:0/12 Workqueue: mtk_vcodec_enc_wq mtk_venc_worker Allocated by task 47: __kasan_kmalloc+0x7f/0x90 fops_vcodec_open+0x85/0x1a0 Freed by task 47: __kasan_slab_free+0x43/0x70 kfree+0xee/0x3a0 fops_vcodec_release+0xb7/0x190 Fix this by calling cancel_work_sync(&ctx->encode_work) before kfree(ctx). This ensures the workqueue handler is both cancelled (if pending) and synchronized (waits for any running handler to complete) before the context is freed. Placement rationale: The fix is placed after v4l2_ctrl_handler_free() and before list_del_init(&ctx->list). At this point, all m2m operations are done (v4l2_m2m_ctx_release() has returned), and we need to ensure the workqueue is synchronized before removing ctx from the list and freeing it. Note: The open error path does NOT need cancel_work_sync() because INIT_WORK() only initializes the work structure - it does not schedule it. Work is only scheduled later during device_run() operations.

In the Linux kernel, the following vulnerability has been resolved: media: em28xx: fix use-after-free in em28xx_v4l2_open() em28xx_v4l2_open() reads dev->v4l2 without holding dev->lock, creating a race with em28xx_v4l2_init()'s error path and em28xx_v4l2_fini(), both of which free the em28xx_v4l2 struct and set dev->v4l2 to NULL under dev->lock. This race leads to two issues: - use-after-free in v4l2_fh_init() when accessing vdev->ctrl_handler, since the video_device is embedded in the freed em28xx_v4l2 struct. - NULL pointer dereference in em28xx_resolution_set() when accessing v4l2->norm, since dev->v4l2 has been set to NULL. Fix this by moving the mutex_lock() before the dev->v4l2 read and adding a NULL check for dev->v4l2 under the lock.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (powerz) Fix use-after-free on USB disconnect After powerz_disconnect() frees the URB and releases the mutex, a subsequent powerz_read() call can acquire the mutex and call powerz_read_data(), which dereferences the freed URB pointer. Fix by: - Setting priv->urb to NULL in powerz_disconnect() so that powerz_read_data() can detect the disconnected state. - Adding a !priv->urb check at the start of powerz_read_data() to return -ENODEV on a disconnected device. - Moving usb_set_intfdata() before hwmon registration so the disconnect handler can always find the priv pointer.

In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: fix use-after-free on disconnect In usb6fire_chip_abort(), the chip struct is allocated as the card's private data (via snd_card_new with sizeof(struct sfire_chip)). When snd_card_free_when_closed() is called and no file handles are open, the card and embedded chip are freed synchronously. The subsequent chip->card = NULL write then hits freed slab memory. Call trace: usb6fire_chip_abort sound/usb/6fire/chip.c:59 [inline] usb6fire_chip_disconnect+0x348/0x358 sound/usb/6fire/chip.c:182 usb_unbind_interface+0x1a8/0x88c drivers/usb/core/driver.c:458 ... hub_event+0x1a04/0x4518 drivers/usb/core/hub.c:5953 Fix by moving the card lifecycle out of usb6fire_chip_abort() and into usb6fire_chip_disconnect(). The card pointer is saved in a local before any teardown, snd_card_disconnect() is called first to prevent new opens, URBs are aborted while chip is still valid, and snd_card_free_when_closed() is called last so chip is never accessed after the card may be freed.

In the Linux kernel, the following vulnerability has been resolved: bcache: fix cached_dev.sb_bio use-after-free and crash In our production environment, we have received multiple crash reports regarding libceph, which have caught our attention: ``` [6888366.280350] Call Trace: [6888366.280452] blk_update_request+0x14e/0x370 [6888366.280561] blk_mq_end_request+0x1a/0x130 [6888366.280671] rbd_img_handle_request+0x1a0/0x1b0 [rbd] [6888366.280792] rbd_obj_handle_request+0x32/0x40 [rbd] [6888366.280903] __complete_request+0x22/0x70 [libceph] [6888366.281032] osd_dispatch+0x15e/0xb40 [libceph] [6888366.281164] ? inet_recvmsg+0x5b/0xd0 [6888366.281272] ? ceph_tcp_recvmsg+0x6f/0xa0 [libceph] [6888366.281405] ceph_con_process_message+0x79/0x140 [libceph] [6888366.281534] ceph_con_v1_try_read+0x5d7/0xf30 [libceph] [6888366.281661] ceph_con_workfn+0x329/0x680 [libceph] ``` After analyzing the coredump file, we found that the address of dc->sb_bio has been freed. We know that cached_dev is only freed when it is stopped. Since sb_bio is a part of struct cached_dev, rather than an alloc every time. If the device is stopped while writing to the superblock, the released address will be accessed at endio. This patch hopes to wait for sb_write to complete in cached_dev_free. It should be noted that we analyzed the cause of the problem, then tell all details to the QWEN and adopted the modifications it made.

In the Linux kernel, the following vulnerability has been resolved: media: as102: fix to not free memory after the device is registered in as102_usb_probe() In as102_usb driver, the following race condition occurs: ``` CPU0 CPU1 as102_usb_probe() kzalloc(); // alloc as102_dev_t .... usb_register_dev(); fd = sys_open("/path/to/dev"); // open as102 fd .... usb_deregister_dev(); .... kfree(); // free as102_dev_t .... sys_close(fd); as102_release() // UAF!! as102_usb_release() kfree(); // DFB!! ``` When a USB character device registered with usb_register_dev() is later unregistered (via usb_deregister_dev() or disconnect), the device node is removed so new open() calls fail. However, file descriptors that are already open do not go away immediately: they remain valid until the last reference is dropped and the driver's .release() is invoked. In as102, as102_usb_probe() calls usb_register_dev() and then, on an error path, does usb_deregister_dev() and frees as102_dev_t right away. If userspace raced a successful open() before the deregistration, that open FD will later hit as102_release() --> as102_usb_release() and access or free as102_dev_t again, occur a race to use-after-free and double-free vuln. The fix is to never kfree(as102_dev_t) directly once usb_register_dev() has succeeded. After deregistration, defer freeing memory to .release(). In other words, let release() perform the last kfree when the final open FD is closed.

In the Linux kernel, the following vulnerability has been resolved: media: hackrf: fix to not free memory after the device is registered in hackrf_probe() In hackrf driver, the following race condition occurs: ``` CPU0 CPU1 hackrf_probe() kzalloc(); // alloc hackrf_dev .... v4l2_device_register(); .... fd = sys_open("/path/to/dev"); // open hackrf fd .... v4l2_device_unregister(); .... kfree(); // free hackrf_dev .... sys_ioctl(fd, ...); v4l2_ioctl(); video_is_registered() // UAF!! .... sys_close(fd); v4l2_release() // UAF!! hackrf_video_release() kfree(); // DFB!! ``` When a V4L2 or video device is unregistered, the device node is removed so new open() calls are blocked. However, file descriptors that are already open-and any in-flight I/O-do not terminate immediately; they remain valid until the last reference is dropped and the driver's release() is invoked. Therefore, freeing device memory on the error path after hackrf_probe() has registered dev it will lead to a race to use-after-free vuln, since those already-open handles haven't been released yet. And since release() free memory too, race to use-after-free and double-free vuln occur. To prevent this, if device is registered from probe(), it should be modified to free memory only through release() rather than calling kfree() directly.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix fence put before wait in amdgpu_amdkfd_submit_ib amdgpu_amdkfd_submit_ib() submits a GPU job and gets a fence from amdgpu_ib_schedule(). This fence is used to wait for job completion. Currently, the code drops the fence reference using dma_fence_put() before calling dma_fence_wait(). If dma_fence_put() releases the last reference, the fence may be freed before dma_fence_wait() is called. This can lead to a use-after-free. Fix this by waiting on the fence first and releasing the reference only after dma_fence_wait() completes. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:697 amdgpu_amdkfd_submit_ib() warn: passing freed memory 'f' (line 696) (cherry picked from commit 8b9e5259adc385b61a6590a13b82ae0ac2bd3482)

In the Linux kernel, the following vulnerability has been resolved: futex: Require sys_futex_requeue() to have identical flags Nicholas reported that his LLM found it was possible to create a UaF when sys_futex_requeue() is used with different flags. The initial motivation for allowing different flags was the variable sized futex, but since that hasn't been merged (yet), simply mandate the flags are identical, as is the case for the old style sys_futex() requeue operations.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix trace_marker copy link list updates When the "copy_trace_marker" option is enabled for an instance, anything written into /sys/kernel/tracing/trace_marker is also copied into that instances buffer. When the option is set, that instance's trace_array descriptor is added to the marker_copies link list. This list is protected by RCU, as all iterations uses an RCU protected list traversal. When the instance is deleted, all the flags that were enabled are cleared. This also clears the copy_trace_marker flag and removes the trace_array descriptor from the list. The issue is after the flags are called, a direct call to update_marker_trace() is performed to clear the flag. This function returns true if the state of the flag changed and false otherwise. If it returns true here, synchronize_rcu() is called to make sure all readers see that its removed from the list. But since the flag was already cleared, the state does not change and the synchronization is never called, leaving a possible UAF bug. Move the clearing of all flags below the updating of the copy_trace_marker option which then makes sure the synchronization is performed. Also use the flag for checking the state in update_marker_trace() instead of looking at if the list is empty.

In the Linux kernel, the following vulnerability has been resolved: can: raw: fix ro->uniq use-after-free in raw_rcv() raw_release() unregisters raw CAN receive filters via can_rx_unregister(), but receiver deletion is deferred with call_rcu(). This leaves a window where raw_rcv() may still be running in an RCU read-side critical section after raw_release() frees ro->uniq, leading to a use-after-free of the percpu uniq storage. Move free_percpu(ro->uniq) out of raw_release() and into a raw-specific socket destructor. can_rx_unregister() takes an extra reference to the socket and only drops it from the RCU callback, so freeing uniq from sk_destruct ensures the percpu area is not released until the relevant callbacks have drained. [mkl: applied manually]

In the Linux kernel, the following vulnerability has been resolved: cxl/port: Fix use after free of parent_port in cxl_detach_ep() cxl_detach_ep() is called during bottom-up removal when all CXL memory devices beneath a switch port have been removed. For each port in the hierarchy it locks both the port and its parent, removes the endpoint, and if the port is now empty, marks it dead and unregisters the port by calling delete_switch_port(). There are two places during this work where the parent_port may be used after freeing: First, a concurrent detach may have already processed a port by the time a second worker finds it via bus_find_device(). Without pinning parent_port, it may already be freed when we discover port->dead and attempt to unlock the parent_port. In a production kernel that's a silent memory corruption, with lock debug, it looks like this: []DEBUG_LOCKS_WARN_ON(__owner_task(owner) != get_current()) []WARNING: kernel/locking/mutex.c:949 at __mutex_unlock_slowpath+0x1ee/0x310 []Call Trace: []mutex_unlock+0xd/0x20 []cxl_detach_ep+0x180/0x400 [cxl_core] []devm_action_release+0x10/0x20 []devres_release_all+0xa8/0xe0 []device_unbind_cleanup+0xd/0xa0 []really_probe+0x1a6/0x3e0 Second, delete_switch_port() releases three devm actions registered against parent_port. The last of those is unregister_port() and it calls device_unregister() on the child port, which can cascade. If parent_port is now also empty the device core may unregister and free it too. So by the time delete_switch_port() returns, parent_port may be free, and the subsequent device_unlock(&parent_port->dev) operates on freed memory. The kernel log looks same as above, with a different offset in cxl_detach_ep(). Both of these issues stem from the absence of a lifetime guarantee between a child port and its parent port. Establish a lifetime rule for ports: child ports hold a reference to their parent device until release. Take the reference when the port is allocated and drop it when released. This ensures the parent is valid for the full lifetime of the child and eliminates the use after free window in cxl_detach_ep(). This is easily reproduced with a reload of cxl_acpi in QEMU with CXL devices present.

In the Linux kernel, the following vulnerability has been resolved: driver core: platform: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix dangling pointer on mgmt_add_adv_patterns_monitor_complete This fixes the condition checking so mgmt_pending_valid is executed whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd) would kfree(cmd) without unlinking it from the list first, leaving a dangling pointer. Any subsequent list traversal (e.g., mgmt_pending_foreach during __mgmt_power_off, or another mgmt_pending_valid call) would dereference freed memory.

In the Linux kernel, the following vulnerability has been resolved: net: fix fanout UAF in packet_release() via NETDEV_UP race `packet_release()` has a race window where `NETDEV_UP` can re-register a socket into a fanout group's `arr[]` array. The re-registration is not cleaned up by `fanout_release()`, leaving a dangling pointer in the fanout array. `packet_release()` does NOT zero `po->num` in its `bind_lock` section. After releasing `bind_lock`, `po->num` is still non-zero and `po->ifindex` still matches the bound device. A concurrent `packet_notifier(NETDEV_UP)` that already found the socket in `sklist` can re-register the hook. For fanout sockets, this re-registration calls `__fanout_link(sk, po)` which adds the socket back into `f->arr[]` and increments `f->num_members`, but does NOT increment `f->sk_ref`. The fix sets `po->num` to zero in `packet_release` while `bind_lock` is held to prevent NETDEV_UP from linking, preventing the race window. This bug was found following an additional audit with Claude Code based on CVE-2025-38617.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: serialize btintel_hw_error() with hci_req_sync_lock btintel_hw_error() issues two __hci_cmd_sync() calls (HCI_OP_RESET and Intel exception-info retrieval) without holding hci_req_sync_lock(). This lets it race against hci_dev_do_close() -> btintel_shutdown_combined(), which also runs __hci_cmd_sync() under the same lock. When both paths manipulate hdev->req_status/req_rsp concurrently, the close path may free the response skb first, and the still-running hw_error path hits a slab-use-after-free in kfree_skb(). Wrap the whole recovery sequence in hci_req_sync_lock/unlock so it is serialized with every other synchronous HCI command issuer. Below is the data race report and the kasan report: BUG: data-race in __hci_cmd_sync_sk / btintel_shutdown_combined read of hdev->req_rsp at net/bluetooth/hci_sync.c:199 by task kworker/u17:1/83: __hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200 __hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223 btintel_hw_error+0x114/0x670 drivers/bluetooth/btintel.c:254 hci_error_reset+0x348/0xa30 net/bluetooth/hci_core.c:1030 write/free by task ioctl/22580: btintel_shutdown_combined+0xd0/0x360 drivers/bluetooth/btintel.c:3648 hci_dev_close_sync+0x9ae/0x2c10 net/bluetooth/hci_sync.c:5246 hci_dev_do_close+0x232/0x460 net/bluetooth/hci_core.c:526 BUG: KASAN: slab-use-after-free in sk_skb_reason_drop+0x43/0x380 net/core/skbuff.c:1202 Read of size 4 at addr ffff888144a738dc by task kworker/u17:1/83: __hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200 __hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223 btintel_hw_error+0x186/0x670 drivers/bluetooth/btintel.c:260

In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Fix use of completion ctx after free On admin queue completion handling, if the admin command completed with error we print data from the completion context. The issue is that we already freed the completion context in polling/interrupts handler which means we print data from context in an unknown state (it might be already used again). Change the admin submission flow so alloc/dealloc of the context will be symmetric and dealloc will be called after any potential use of the context.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Fix use-after-free in migration restore When an error is returned from xe_sriov_pf_migration_restore_produce(), the data pointer is not set to NULL, which can trigger use-after-free in subsequent .write() calls. Set the pointer to NULL upon error to fix the problem. (cherry picked from commit 4f53d8c6d23527d734fe3531d08e15cb170a0819)