Base de CVEs

A NULL pointer dereference in the AP4_TkhdAtom::GetTrackId() function of Aleksoid1978 MPC-BE before commit 4341cb3 allows attackers to cause a Denial of Service (DoS) via a crafted MP4 file.

RAOP module accepts unbounded Content-Length values and does not check the pw_array_add() return.

In the Linux kernel, the following vulnerability has been resolved: ASoC: wm_adsp: Fix NULL dereference when removing firmware controls In wm_adsp_control_remove() check that the priv pointer is not NULL before attempting to cleanup what it points to. When cs_dsp creates a control it calls wm_adsp_control_add_cb() so that wm_adsp can create its own private control data. There are two cases where private data is not created: 1. The control is a SYSTEM control, so an ALSA control is not created. 2. The codec driver has registered a control_add() callback that hides the control, so wm_adsp_control_add() is not called. When cs_dsp_remove destroys its control list it calls wm_adsp_control_remove() for each control. But wm_adsp_control_remove() was attempting to cleanup the private data pointed to by cs_ctl->priv without checking the pointer for NULL.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SDCA: fix NULL pointer dereference in sdca_dev_unregister_functions sdca_dev_unregister_functions() iterates over all SDCA function descriptors and calls sdca_dev_unregister() on each func_dev without checking for NULL. When a function registration has failed partway through, or the device cleanup races with probe deferral, func_dev entries may be NULL, leading to a kernel oops: BUG: kernel NULL pointer dereference, address: 0000000000000040 RIP: 0010:device_del+0x1e/0x3e0 Call Trace: sdca_dev_unregister_functions+0x37/0x60 [snd_soc_sdca] release_nodes+0x35/0xb0 devres_release_all+0x90/0x100 device_unbind_cleanup+0xe/0x80 device_release_driver_internal+0x1c1/0x200 bus_remove_device+0xc6/0x130 device_del+0x161/0x3e0 device_unregister+0x17/0x60 sdw_delete_slave+0xb6/0xd0 [soundwire_bus] sdw_bus_master_delete+0x1e/0x50 [soundwire_bus] ... sof_probe_work+0x19/0x30 [snd_sof] This was observed on a Lenovo ThinkPad X1 Carbon G14 (Panther Lake) with the SOF audio driver probe failing due to missing Panther Lake firmware, causing the subsequent cleanup of SoundWire devices to trigger the crash. Fix this with three changes: 1) Add a NULL guard in sdca_dev_unregister() so that callers do not need to pre-validate the pointer (defense in depth). 2) In sdca_dev_unregister_functions(), skip NULL func_dev entries and clear func_dev to NULL after unregistration, making the function idempotent and safe against double-invocation. 3) In sdca_dev_register_functions(), roll back all previously registered functions when a later one fails, so the function array is never left in a partially-populated state.

In the Linux kernel, the following vulnerability has been resolved: i2c: qcom-cci: Fix NULL pointer dereference in cci_remove() On all modern platforms Qualcomm CCI controller provides two I2C masters, and on particular boards only one I2C master may be initialized, and in such cases the device unbinding or driver removal causes a NULL pointer dereference, because cci_halt() is called for all two I2C masters, but a completion is initialized only for the single enabled master: % rmmod i2c-qcom-cci Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 <snip> Call trace: __wait_for_common+0x194/0x1a8 (P) wait_for_completion_timeout+0x20/0x2c cci_remove+0xc4/0x138 [i2c_qcom_cci] platform_remove+0x20/0x30 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 driver_detach+0x50/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 qcom_cci_driver_exit+0x18/0x1008 [i2c_qcom_cci] ....

In the Linux kernel, the following vulnerability has been resolved: net: airoha: Add NULL check for of_reserved_mem_lookup() in airoha_qdma_init_hfwd_queues() of_reserved_mem_lookup() may return NULL if the reserved memory region referenced by the "memory-region" phandle is not found in the reserved memory table (e.g. due to a misconfigured DTS or a removed memory-region node). The current code dereferences the returned pointer without checking for NULL, leading to a kernel NULL pointer dereference at the following lines: dma_addr = rmem->base; // line 1156 num_desc = div_u64(rmem->size, buf_size); // line 1160 Add a NULL check after of_reserved_mem_lookup() and return -ENODEV if the lookup fails, which is consistent with the existing error handling for of_parse_phandle() failure in the same code block.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/lru_sort: handle ctx allocation failure DAMON_LRU_SORT allocates the damon_ctx object for its kdamond in its init function. damon_lru_sort_enabled_store() wrongly assumes the allocation will always succeed once tried. If the damon_ctx allocation was failed, therefore, code execution reaches to damon_commit_ctx() while 'ctx' is NULL. As a result, it dereferences the NULL 'ctx' pointer. Avoid the NULL dereference by returning -ENOMEM if 'ctx' is NULL.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/reclaim: handle ctx allocation failure Patch series "mm/damon/{reclaim,lru_sort}: handle ctx allocation failures". DAMON_RECLAIM and DAMON_LRU_SORT could dereference NULL pointers if their damon_ctx object allocations fail. The bugs are expected to happen infrequently because the allocations are arguably too small to fail on common setups. But theoretically they are possible and the consequences are bad. Fix those. The issues were discovered [1] by Sashiko. This patch (of 2): DAMON_RECLAIM allocates the damon_ctx object for its kdamond in its init function. damon_reclaim_enabled_store() wrongly assumes the allocation will always succeed once tried. If the damon_ctx allocation was failed, therefore, code execution reaches to damon_commit_ctx() while 'ctx' is NULL. As a result, it dereferences the NULL 'ctx' pointer. Avoid the NULL dereference by returning -ENOMEM if 'ctx' is NULL.

In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix NULL pointer dereference in bond_do_ioctl() In bond_do_ioctl(), slave_dev is obtained via __dev_get_by_name() which can return NULL if the requested interface name does not exist. However, the subsequent slave_dbg() call is placed before the NULL check: slave_dev = __dev_get_by_name(net, ifr->ifr_slave); slave_dbg(bond_dev, slave_dev, "slave_dev=%p:\n", slave_dev); //here if (!slave_dev) return -ENODEV; The slave_dbg() macro expands to netdev_dbg(bond_dev, "(slave %s): " fmt, (slave_dev)->name, ...) which unconditionally dereferences slave_dev->name before the NULL check is performed. This results in a NULL pointer dereference kernel oops when a user calls bonding ioctl (e.g. SIOCBONDENSLAVE, SIOCBONDRELEASE, etc.) with a non-existent slave interface name. This is reachable from userspace via the bonding ioctl interface with CAP_NET_ADMIN capability, making it a potential local denial-of-service vector. Fix by moving the slave_dbg() call after the NULL check.

In Modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01826924; Issue ID: MSV-7301.

Woodpecker before 3.15.0 registers the /api/orgs/lookup/*org_full_name endpoint without authentication middleware, and the LookupOrg handler unconditionally dereferences the session user (user.ForgeID, via ForgeFromUser) when selecting the forge to query. For an unauthenticated request session.User returns nil, so any unauthenticated HTTP request triggers a NULL pointer dereference in the handler. The panic is recovered by gin recovery middleware and the server continues serving (returning HTTP 500), but each request writes a multi-line panic stack trace to the error log. A low-bandwidth unauthenticated attacker can repeatedly probe the endpoint to flood the logs (about 37 lines per request), inflating disk usage and downstream log-ingestion cost and burying legitimate log events.

mcumgr_serial_process_frag() in subsys/mgmt/mcumgr/transport/src/serial_util.c calls net_buf_reset() on the result of smp_packet_alloc() before checking it for NULL. smp_packet_alloc() uses net_buf_alloc(K_NO_WAIT) against the shared MCUmgr packet pool (CONFIG_MCUMGR_TRANSPORT_NETBUF_COUNT, default 4), which returns NULL when the pool is exhausted. In default builds the __ASSERT_NO_MSG in net_buf_reset is a no-op, so net_buf_simple_reset writes through the NULL pointer (buf->len = 0; buf->data = buf->__buf), causing a fault/crash. The fragment data reaches this code from attacker-controlled bytes on the MCUmgr serial/UART/shell-console transports (smp_uart.c, smp_raw_uart.c, smp_shell.c), and a fresh buffer is allocated at the start of essentially every new packet. An attacker on the serial/console link can flood the transport to drive the 4-entry buffer pool to exhaustion and induce the NULL dereference, crashing the device (denial of service). The defect was introduced after the original MCUmgr rework and shipped in Zephyr v4.4.0. The fix moves the NULL check ahead of net_buf_reset.

In the Linux kernel, the following vulnerability has been resolved: agp/amd64: Fix broken error propagation in agp_amd64_probe() A NULL pointer dereference was observed in the AMD64 AGP driver when running in a virtualized environment (e.g. qemu/kvm) without a physical AMD northbridge. The crash occurs in amd64_fetch_size() when attempting to dereference the pointer returned by node_to_amd_nb(0). The root cause of this crash is broken error propagation in agp_amd64_probe(): When no AMD northbridges are found, cache_nbs() correctly returns -ENODEV. However, the probe function erroneously checks the return value against exactly -1, rather than < 0. As a result, the hardware absence error is masked, allowing the driver to improperly proceed with initialization. It eventually calls agp_add_bridge(), which invokes amd64_fetch_size(). Since the hardware does not exist, node_to_amd_nb(0) returns NULL, leading to a General Protection Fault (GPF) when accessing its ->misc member. Fix the issue by correcting the error check in agp_amd64_probe() to abort properly when cache_nbs() returns any negative error code. This prevents the driver from erroneously proceeding without hardware, thereby avoiding the subsequent NULL pointer dereference at its source.

The Zephyr Bluetooth LE Audio Basic Audio Profile (BAP) unicast client mishandles peer-supplied ASE state notifications. In unicast_client_ep_qos_state() (subsys/bluetooth/audio/bap_unicast_client.c), the handler writes attacker-controlled QoS fields (interval, framing, phy, sdu, rtn, latency, pd) through the stream->qos pointer with only a stream != NULL guard. stream->qos is NULL for any stream that has been codec-configured via bt_bap_stream_config() but not yet added to a unicast group (it is set only by unicast_group_add_stream()). A malicious or buggy remote ASCS server, to which the local device is connected as a BAP unicast client, can send a GATT notification announcing the ASE has entered the QoS Configured state while the local endpoint is still in the Codec Configured state — a transition the dispatcher explicitly permits — during that window, causing a write through a NULL pointer and a crash (denial of service). The data written is itself remote-controlled. The defect shipped in v4.3.0 and v4.4.0 (and earlier). The fix re-points all BAP QoS storage to the always-valid embedded ep->qos struct, eliminating the NULL dereference.

In the Linux kernel, the following vulnerability has been resolved: net: mana: Use pci_name() for debugfs directory naming Use pci_name(pdev) for the per-device debugfs directory instead of hardcoded "0" for PFs and pci_slot_name(pdev->slot) for VFs. The previous approach had two issues: 1. pci_slot_name() dereferences pdev->slot, which can be NULL for VFs in environments like generic VFIO passthrough or nested KVM, causing a NULL pointer dereference. 2. Multiple PFs would all use "0", and VFs across different PCI domains or buses could share the same slot name, leading to -EEXIST errors from debugfs_create_dir(). pci_name(pdev) returns the unique BDF address, is always valid, and is unique across the system.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: prevent NULL pointer dereference in mt7925_tx_check_aggr() Move the NULL check for 'sta' before dereferencing it to prevent a possible crash.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/ras: Fix NULL deref in ras_core_ras_interrupt_detected() Fixes a NULL pointer dereference when ras_core is NULL and ras_core->dev is accessed in the error path. Reported by: Dan Carpenter <dan.carpenter@linaro.org>

In the Linux kernel, the following vulnerability has been resolved: drm/amd/ras: Fix NULL deref in ras_core_get_utc_second_timestamp() ras_core_get_utc_second_timestamp() retrieves the current UTC timestamp (in seconds since the Unix epoch) through a platform-specific RAS system callback and is used for timestamping RAS error events. The function checks ras_core in the conditional statement before calling the sys_fn callback. However, when the condition fails, the function prints an error message using ras_core->dev. If ras_core is NULL, this can lead to a potential NULL pointer dereference when accessing ras_core->dev. Add an early NULL check for ras_core at the beginning of the function and return 0 when the pointer is not valid. This prevents the dereference and makes the control flow clearer.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid NULL dereference in dc_dmub_srv error paths In dc_dmub_srv_log_diagnostic_data() and dc_dmub_srv_enable_dpia_trace(). Both functions check: if (!dc_dmub_srv || !dc_dmub_srv->dmub) and then call DC_LOG_ERROR() inside that block. DC_LOG_ERROR() uses dc_dmub_srv->ctx internally. So if dc_dmub_srv is NULL, the logging itself can dereference a NULL pointer and cause a crash. Fix this by splitting the checks. First check if dc_dmub_srv is NULL and return immediately. Then check dc_dmub_srv->dmub and log the error only when dc_dmub_srv is valid. Fixes the below: ../display/dc/dc_dmub_srv.c:962 dc_dmub_srv_log_diagnostic_data() error: we previously assumed 'dc_dmub_srv' could be null (see line 961) ../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_enable_dpia_trace() error: we previously assumed 'dc_dmub_srv' could be null (see line 1166)

In the Linux kernel, the following vulnerability has been resolved: pinctrl: pinconf-generic: Fully validate 'pinmux' property The pinconf_generic_parse_dt_pinmux() assumes that the 'pinmux' property is not empty when present. This might be not true. With that, the allocator will give a special value in return and not NULL which lead to the crash when trying to access that (invalid) memory. Fix that by fully validating 'pinmux' value, including its length.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ps883x: Fix Oops at unbind When trying to unbind a device in order to bind to it vfio-platform as: echo bc0000.geniqup > /sys/bus/platform/devices/bc0000.geniqup/driver/unbind I get the following Oops: [ 436.478639] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 [ 436.487762] Mem abort info: [ 436.490716] ESR = 0x0000000096000004 [ 436.494595] EC = 0x25: DABT (current EL), IL = 32 bits [ 436.500071] SET = 0, FnV = 0 [ 436.503250] EA = 0, S1PTW = 0 [ 436.506505] FSC = 0x04: level 0 translation fault [ 436.511533] Data abort info: [ 436.514558] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 436.520215] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 436.525436] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 436.530918] user pgtable: 4k pages, 48-bit VAs, pgdp=00000008861a9000 [ 436.537554] [0000000000000020] pgd=0000000000000000, p4d=0000000000000000 [ 436.544548] Internal error: Oops: 0000000096000004 [#1] SMP [ 436.550374] Modules linked in: [ 436.553542] CPU: 2 UID: 0 PID: 671 Comm: bash Tainted: G W 7.0.0-rc3-g56fcdd0911a5-dirty #2 PREEMPT [ 436.564440] Tainted: [W]=WARN [ 436.567515] Hardware name: LENOVO 91B6CTO1WW/3796, BIOS O6NKT3BA 05/02/2025 [ 436.574675] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 436.581841] pc : ps883x_retimer_remove+0x14/0x94 [ 436.586605] lr : i2c_device_remove+0x28/0x84 [ 436.591017] sp : ffff8000847137c0 That's because the ps883x_retimer_remove() retrieves the driver data from i2c_get_clientdata() which was never set at probe. So, add i2c_set_clientdata() at the end of the probe.

In the Linux kernel, the following vulnerability has been resolved: crypto: eip93 - fix hmac setkey algo selection eip93_hmac_setkey() allocates a temporary ahash transform for computing HMAC ipad/opad key material. The allocation uses the driver-specific cra_driver_name (e.g. "sha256-eip93") but passes CRYPTO_ALG_ASYNC as the mask, which excludes async algorithms. Since the EIP93 hash algorithms are the only ones registered under those driver names and they are inherently async, the lookup is self-contradictory and always fails with -ENOENT. When called from the AEAD setkey path, this failure leaves the SA record partially initialized with zeroed digest fields. A subsequent crypto operation then dereferences a NULL pointer in the request context, resulting in a kernel panic: ``` pc : eip93_aead_handle_result+0xc8c/0x1240 [crypto_hw_eip93] lr : eip93_aead_handle_result+0xbec/0x1240 [crypto_hw_eip93] sp : ffffffc082feb820 x29: ffffffc082feb820 x28: ffffff8011043980 x27: 0000000000000000 x26: 0000000000000000 x25: ffffffc078da0bc8 x24: 0000000091043980 x23: ffffff8004d59e50 x22: ffffff8004d59410 x21: ffffff8004d593c0 x20: ffffff8004d593c0 x19: ffffff8004d4f300 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000007fda7aa498 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: fffffffff8127a80 x9 : 0000000000000000 x8 : ffffff8004d4f380 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : 0000000000000008 x3 : 0000000000000009 x2 : 0000000000000008 x1 : 0000000028000003 x0 : ffffff8004d388c0 Code: 910142b6 f94012e0 f9002aa0 f90006d3 (f9400740) ``` The reported symbol eip93_aead_handle_result+0xc8c is a resolution artifact from static functions being merged under the nearest exported symbol. Decoding the faulting sequence: ``` 910142b6 ADD X22, X21, #0x50 f94012e0 LDR X0, [X23, #0x20] f9002aa0 STR X0, [X21, #0x50] f90006d3 STR X19, [X22, #0x8] f9400740 LDR X0, [X26, #0x8] ``` The faulting LDR at [X26, #0x8] is loading ctx->flags (offset 8 in eip93_hash_ctx), where ctx has been resolved to NULL from a partially initialized or unreachable transform context following the failed setkey. Fix this by dropping the CRYPTO_ALG_ASYNC mask from the crypto_alloc_ahash() call. The code already handles async completion correctly via crypto_wait_req(), so there is no requirement to restrict the lookup to synchronous algorithms. Note that hashing a single 64-byte block through the hardware is likely slower than doing it in software due to the DMA round-trip overhead, but offloading it may still spare CPU cycles on the slower embedded cores where this IP is found. [Detailed investigation report of this bug]

In the Linux kernel, the following vulnerability has been resolved: reset: amlogic: t7: Fix null reset ops Fix missing reset ops causing kernel null pointer dereference. This SOC's reset is currently not used yet.

In the Linux kernel, the following vulnerability has been resolved: net: airoha: Move ndesc initialization at end of airoha_qdma_init_tx() If queue entry list allocation fails in airoha_qdma_init_tx_queue routine, airoha_qdma_cleanup_tx_queue() will trigger a NULL pointer dereference accessing the queue entry array. The issue is due to the early ndesc initialization in airoha_qdma_init_tx_queue(). Fix the issue moving ndesc initialization at end of airoha_qdma_init_tx routine.