Início / CVEs
Base de CVEs
Vulnerabilidades publicadas, com severidade, exploração conhecida e fontes oficiais.
CVE-2026-95394
Média · 4.7
CWE-606 29/09/2026
Unchecked Input for Loop Condition in Wireshark
Microsoft Network Monitor file parser large loop in 4.6.0 to 4.6.8 and 4.4.0 to 4.4.18 allows denial of service
CVE-2026-16652
Alta · 7.1
CWE-606 21/09/2026
Temporal Server Schedule exclusion search can cause excessive CPU consumption
Temporal Server did not bound the work performed while searching for a Schedule's next action time. An authenticated caller with namespace write permission could create or update a Schedule that combines a fine-grained cadence with an exclusion calendar that rejects every candidate time, causing the server to evaluate excluded candidates without a per-search work budget. This can consume excessive CPU in Frontend and Schedule worker components. A persisted specification can also cause its backing Schedule Workflow to repeatedly fail and retry, allowing CPU consumption to continue without additional requests until the Schedule is deleted or its backing Workflow is terminated. Repeated or parallel exploitation can deny service. The issue affects availability only; it does not expose or modify Workflow data.
CVE-2026-93653
Média · 5.5
CWE-606 18/09/2026
Poppler: poppler: unbounded cpu loop in splashoutputdev::tilingpatternfill via unvalidated tiling-pattern repeat count (denial of service)
A denial of service flaw was found in Poppler's Splash backend. A crafted PDF with tiling-pattern geometry approaching the int32 boundary can cause SplashOutputDev::tilingPatternFill to compute an attacker-controlled repeat count that drives an excessively long loop in the pattern-fill scanline routine, without a corresponding memory allocation. An attacker could exploit this by supplying a malicious PDF to an application that renders it via Poppler's Splash backend, causing the rendering process to consume 100% CPU for an attacker-controlled, extended duration.
CVE-2026-85730
Alta · 8.2
CWE-606 04/09/2026
smol-toml: Denial of Service via malformed TOML documents
smol-toml is a small, fast, and correct TOML parser and serializer. Prior to 1.7.1, parse() can enter an infinite loop when a value inside an array or inline table is followed by a comment with no trailing newline. In src/util.ts, skipUntil() calls indexOfNewline(), receives -1 at the end of input, and resets the cursor to the beginning of the string instead of leaving the structure scan. The parser then hangs indefinitely and can consume a service's processing capacity when an application parses attacker-controlled TOML. This issue is fixed in version 1.7.1.
CVE-2026-13761
Alta · 8.8
CWE-606 28/08/2026
Pega Platform versions 7.1.0 through 25.1.2 are affected by an improper validation of inputs that are used for loop conditions, potentially leading to a denial of service or other consequences because of excessive looping.
Pega Platform versions 7.1.0 through 25.1.2 are affected by an improper validation of inputs that are used for loop conditions, potentially leading to a denial of service or other consequences because of excessive looping.
CVE-2026-16599
Média · 5.1
CWE-606 25/08/2026
Denial of Service in GNU wget
GNU wget is vulnerable to denial of service in its FTP OPIE/S-KEY authentication functionality. The server-supplied sequence number from the FTP challenge line is used as an iteration count for an MD5 key-derivation loop without any upper bound validation. A malicious FTP server or a network attacker positioned to intercept FTP traffic can send a crafted OPIE challenge with a sequence number near INT_MAX, causing wget to perform up to approximately 2.1 billion MD5 computations and suspend for some time. The --timeout option does not mitigate this because it applies only to network I/O, not CPU computation.
This issue was fixed in commit e9697d98e7249b0f68a6be040a4f3dcc5bc101fa
CVE-2026-62901
Alta · 7.5
CWE-606 11/08/2026
.NET Denial of Service Vulnerability
Unchecked input for loop condition in .NET allows an unauthorized attacker to deny service over a network.
CVE-2026-71439
Média · 5.3
CWE-606 06/08/2026
Mermaid radar diagrams are vulnerable to DoS
Mermaid is a JavaScript tool that uses Markdown-inspired text to create and modify diagrams and charts. From version 11.6.0 until 11.16.1, Mermaid Radar Diagrams allow arbitrary large values for the ticks parameter, which can cause high CPU usage and freeze the rendering webpage or JavaScript process for long periods of time, potentially until the process is killed from memory exhaustion. This issue is fixed in version 11.16.1.
CVE-2026-20301
Alta · 8.6
CWE-606 05/08/2026
Cisco IOS Software and IOS XE Software Extensible Messaging Client Protocol Denial of Service Vulnerability
A vulnerability in the Extensible Messaging Client Protocol (XMCP), also referred to as the External Client protocol, of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper handling of malformed XMCP packets. An attacker could exploit this vulnerability by sending a malformed XMCP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload unexpectedly, resulting in a DoS condition. The attacker does not need the XMCP client username to exploit this vulnerability.
CVE-2026-68077
Média · 6.5
CWE-606 05/08/2026
Apache Qpid Broker-J: Unbounded disposition range handling can lead to denial of service
An authenticated attacker can craft a disposition frame with large or illegal ranges causing excessive CPU usage due to naive range handling, leading to denial of service.
This issue affects Apache Qpid Broker-J: through 10.0.1.
Users are recommended to upgrade to version 10.1.0, which fixes the issue.
CVE-2026-67554
Média · 6.5
CWE-606 05/08/2026
Apache Qpid Proton Dotnet: Unbounded disposition range handling can lead to denial of service
An authenticated attacker can craft a disposition frame with large or illegal ranges causing excessive CPU usage due to naive range handling, leading to denial of service.
This issue affects Apache Qpid Proton-Dotnet: through 1.0.0.
Users are recommended to upgrade to version 1.1.0, which fixes the issue.
CVE-2026-66276
Média · 6.5
CWE-606 05/08/2026
Apache Qpid Proton-J: Unbounded disposition range handling can lead to denial of service
An authenticated attacker can craft a disposition frame with large or illegal ranges causing excessive CPU usage due to naive range handling, leading to denial of service.
This issue affects Apache Qpid Proton-J: through 0.34.1.
Users are recommended to upgrade to version 0.35.0, which fixes the issue.
CVE-2026-55731
Média · 6.6
CWE-606 24/07/2026
Loytec LINX firmware: Unchecked input for loop condition in the SNMP agent
Unchecked input for loop condition (CWE-606) in the SNMP agent in Loytec LIP-ME201C, L-INX, L-GATE, L-ROC, L-IOB, L-DALI, L-VIS and L-PAD through 8.4.16 on LINX-A64 allows an unauthenticated remote attacker to cause persistent denial of service (CPU exhaustion) via a crafted SNMP GETNEXT request with a large OID component.
CVE-2026-33800
Média · 6.5
CWE-606 09/07/2026
Junos OS: MX Series: In a VC scenario a high rate of micro-BFD session flaps will cause an FPC crash
An Unchecked Input for Loop Condition vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS).Micro-BFD session flaps generate respective up/down events which are queued by PFEMAN for processing. Especially in a Virtual-Chassis (VC) scenario with locality‑bias configured, processing takes a significant amount of time for each event. If these sessions keep flapping, new events are constantly added, and in turn PFEMAN never completes processing these events. This results in the PFEMAN watchdog timer expiring, which causes the FPC to crash and restart, representing a complete service outage.
This issue only affects MX series FPCs up to and including MPC9, and LC2101/2103 and LC480. It does not affect MPC10/11, LC4800/9600, and MX304.
This issue affects Junos OS on MX Series:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S8,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S3,
* 25.2 versions before 25.2R2.
CVE-2026-15172
Média · 5.5
CWE-606 08/07/2026
Unchecked Input for Loop Condition in Wireshark
FMP/NOTIFY protocol dissector crash in Wireshark 4.6.0 to 4.6.6 and 4.4.0 to 4.4.16 allows denial of service
CVE-2026-41986
Baixa · 2.4
CWE-606 09/06/2026
Logic bypass vulnerability in the file system. Impact: Successful exploitation of this…
Logic bypass vulnerability in the file system. Impact: Successful exploitation of this vulnerability may affect availability.
CVE-2026-27145
Média · 6.5
CWE-606 02/06/2026
Inefficient candidate hostname parsing in crypto/x509
(*x509.Certificate).VerifyHostname previously called matchHostnames in a loop over all DNS Subject Alternative Name (SAN) entries. This caused strings.Split(host, ".") to execute repeatedly on the same input hostname. With a large DNS SAN list, verification costs scaled quadratically based on the number of SAN entries multiplied by the hostname's label count. Because x509.Verify validates hostnames before building the certificate chain, this overhead occurred even for untrusted certificates.
CVE-2026-5950
Média · 5.3
CWE-606 20/05/2026
Unbounded resend loop in BIND 9 resolver
An unbounded resend loop vulnerability exists in the BIND 9 resolver state machine during bad-server handling, enabling a remote unauthenticated attacker to cause severe resource exhaustion by sending queries that trigger specific retry conditions.
This issue affects BIND 9 versions 9.18.36 through 9.18.48, 9.20.8 through 9.20.22, 9.21.7 through 9.21.21, 9.18.36-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1.
CVE-2026-0243
Média · 6.5
CWE-606 13/05/2026
Prisma SD-WAN: Denial of Service (DoS) Vulnerability Through IPv6 Crafted Packet
A denial of service (DoS) vulnerability in Palo Alto Networks Prisma SD-WAN ION devices enables an unauthenticated attacker in a network adjacent to a Prisma SD-WAN ION device to cause a system disruption by sending a specially crafted IPv6 packet.
CVE-2026-1519
Alta · 7.5
CWE-606 25/03/2026
Excessive NSEC3 iterations cause high CPU load during insecure delegation validation
If a BIND resolver is performing DNSSEC validation and encounters a maliciously crafted zone, the resolver may consume excessive CPU. Authoritative-only servers are generally unaffected, although there are circumstances where authoritative servers may make recursive queries (see: https://kb.isc.org/docs/why-does-my-authoritative-server-make-recursive-queries).
This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.46, 9.20.0 through 9.20.20, 9.21.0 through 9.21.19, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.46-S1, and 9.20.9-S1 through 9.20.20-S1.
CVE-2019-25624
Média · 5.5
CWE-606 23/03/2026
Liquid Studio 2.17 Denial of Service via Malformed Input
Liquid Studio 2.17 contains a denial of service vulnerability that allows local attackers to crash the application by providing malformed input through the keyboard interface. Attackers can trigger the vulnerability by entering arbitrary characters during application runtime, causing the application to become unresponsive or terminate abnormally.
CVE-2026-27689
Alta · 7.7
CWE-606 10/03/2026
Denial of service (DOS) in SAP Supply Chain Management
Due to an uncontrolled resource consumption (Denial of Service) vulnerability, an authenticated attacker with regular user privileges and network access can repeatedly invoke a remote-enabled function module with an excessively large loop-control parameter. This triggers prolonged loop execution that consumes excessive system resources, potentially rendering the system unavailable. Successful exploitation results in a denial-of-service condition that impacts availability, while confidentiality and integrity remain unaffected.
CVE-2023-6237
Média · 5.9
CWE-606 25/04/2024
Excessive time spent checking invalid RSA public keys
Issue summary: Checking excessively long invalid RSA public keys may take
a long time.
Impact summary: Applications that use the function EVP_PKEY_public_check()
to check RSA public keys may experience long delays. Where the key that
is being checked has been obtained from an untrusted source this may lead
to a Denial of Service.
When function EVP_PKEY_public_check() is called on RSA public keys,
a computation is done to confirm that the RSA modulus, n, is composite.
For valid RSA keys, n is a product of two or more large primes and this
computation completes quickly. However, if n is an overly large prime,
then this computation would take a long time.
An application that calls EVP_PKEY_public_check() and supplies an RSA key
obtained from an untrusted source could be vulnerable to a Denial of Service
attack.
The function EVP_PKEY_public_check() is not called from other OpenSSL
functions however it is called from the OpenSSL pkey command line
application. For that reason that application is also vulnerable if used
with the '-pubin' and '-check' options on untrusted data.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue.