Base de CVEs

FFmpeg's RASC video decoder (decode_dlta in libavcodec/rasc.c) performs 32-bit reads and writes at the row cursor before the NEXT_LINE row-boundary check and validates the DLTA region in pixel rather than byte units, so a DLTA run on a PAL8 frame can access several bytes past the row allocation. A crafted media stream using the RASC FourCC, decoded by libavcodec, triggers a bitstream-controlled out-of-bounds heap write and adjacent out-of-bounds read, leading to memory corruption.

Zephyr's IP socket recvmsg() implementation (subsys/net/lib/sockets/sockets_inet.c, insert_pktinfo()) validated the user-supplied ancillary (msg_control) buffer using only the payload length (msg->msg_controllen < pktinfo_len) before writing a full control message consisting of an aligned cmsg header plus the payload. Because the check omitted the cmsg header size, a control buffer whose length falls in the under-checked window (e.g. 16-27 bytes for IPv4 IP_PKTINFO on a 64-bit target, where a single element actually occupies 28 bytes) passes the guard yet causes a fixed-size out-of-bounds write of up to one cmsg header (~12 bytes) past the end of the buffer. Under CONFIG_USERSPACE the recvmsg verifier allocates a kernel-heap copy of the control buffer sized to msg_controllen and runs the implementation against it, so the overflow corrupts kernel heap memory and is triggerable from an unprivileged userspace thread; in supervisor mode it corrupts the caller's buffer. The path is reachable on a UDP/IP socket with IP_PKTINFO/IPV6_RECVPKTINFO (or hoplimit/timestamping) enabled when the application calls recvmsg() with an undersized control buffer and a datagram is received; part of the overwritten bytes (the destination IP in ipi_addr) is influenced by the received packet. The fix makes the capacity check use NET_CMSG_SPACE(pktinfo_len) (aligned header + aligned data) and returns -ENOMEM when the buffer is too small. Affected: v3.6.0 through v4.4.0.

The TIFF decoder can panic when decoding an invalid image with an out-of-bounds strip offset.

An unauthenticated out-of-bounds write vulnerability exists in onvif.cgi in GeoVision GV-LPC2011 and GV-LPC2211 V1.12 and earlier. The vulnerability is caused by insufficient bounds checking when processing HTTP request body data. A remote attacker may exploit this vulnerability by sending a crafted request with excessive input, causing memory corruption and resulting in a denial of service.

Out-of-bounds write in SetSuitesHashSigAlgo when processing an oversized signature algorithms list, allowing a write past the bounds of the destination buffer.

A heap buffer overflow could occur in the DTLS 1.3 ACK serialization path before the connecting peer is authenticated. The buffer overflow was due to an integer truncation when computing the length of the ACK record-number list, causing an undersized buffer to be allocated and then overrun. This affects builds using DTLS 1.3 and wolfSSL version 5.9.0 and earlier. A fix was added to the 5.9.1 release.

Out-of-bounds write in the Renesas TSIP TLS 1.3 transcript buffer. In tsip_StoreMessage() the capacity check guarding the fixed message bag (MSGBAG_SIZE) sets an error code but fails to return, so execution falls through to an XMEMCPY that writes past the end of the buffer once the accumulated TLS 1.3 handshake transcript exceeds MSGBAG_SIZE (8 KB), corrupting adjacent heap state and potentially causing a remote denial of service crash. The bag is sized to hold a normal handshake, so this is reached only by an unusually large but valid certificate chain, or by a malicious or man-in-the-middle server sending an oversized handshake message to a client that does not strictly verify the chain. This only affects builds using the Renesas TSIP TLS port (WOLFSSL_RENESAS_TSIP_TLS) as a TLS 1.3 client on Renesas MCUs with TSIP hardware enabled, and is rated High within those builds. All other configurations are unaffected.

jq is a command-line JSON processor. Prior to 1.8.2,` jq --rawfile` can turn a handled oversized-string error into invalid-state reuse and a real heap out-of-bounds write in assertion-disabled builds. When jv_load_file(raw=1) reads an attacker-controlled file, it repeatedly appends file chunks to the same jv string accumulator. Once jv_string_append_buf() returns jv_invalid_with_msg("String too long"), the raw-file loop does not stop. If the file contains at least one more byte, the next loop iteration appends a new chunk to an object that is already invalid. With assertions enabled this aborts in jvp_string_ptr(). With assertions disabled, the invalid object is interpreted as a string object and ASan reports heap-buffer-overflow. This vulnerability is fixed in 1.8.2.

Vim is an open source, command line text editor. Prior to 9.2.0698, the single-byte branch of spell_soundfold_sofo() in src/spell.c translates a word through a spell file's SOFO (sound-folding) byte map into a caller-owned result buffer. Its copy loop advances the output index ri with no upper bound and terminates only on the input NUL, writing one byte per input byte into the MAXWLEN-element stack buffer the caller provides. A word longer than MAXWLEN, passed to soundfold() (or reached via sound-based spell suggestion) while a SOFO-based spell language is active, therefore writes past the end of that buffer. This is a stack out-of-bounds write that corrupts the call frame and crashes the editor. This vulnerability is fixed in 9.2.0698.

Vim is an open source, command line text editor. Prior to 9.2.0653, the tree_count_words() function in src/spellfile.c fills in the word-count fields of a spell-file word trie by walking it iteratively with a depth counter. The counter is bounded only by the trie structure itself; it is never checked against the size of the fixed MAXWLEN-element stack arrays it indexes (arridx[], curi[], wordcount[]). A crafted .spl/.sug file pair, loaded when the user invokes spell suggestion, can drive the descent arbitrarily deep, so the function writes past the end of those arrays. This is a stack out-of-bounds write that corrupts the call frame and crashes the editor. This vulnerability is fixed in 9.2.0653.

In EmberZNet v9.0.2 and earlier, malformed ClearWeekdaySchedule messages can trigger out-of-bounds writes into Door Lock schedule state. The size and location of this data is limited. These messages must come from a device that has already joined the network. Only devices supporting the Door Lock cluster may be impacted.

In EmberZNet v9.0.2 and earlier, malformed IAS Zone enrollment messages can trigger an out-of-bounds state-table write and terminate the process. The size and location of this write is limited. These messages must come from a device that has already joined the network. Only devices supporting the IAS Zone cluster may be impacted.

In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: make ebt_snat ARP rewrite writable The ebtables SNAT target keeps the Ethernet source address rewrite behind skb_ensure_writable(skb, 0). This is intentional: at the bridge ebtables hooks the Ethernet header is addressed through skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check the payload, not the Ethernet header, and would reintroduce the small packet regression fixed by commit 63137bc5882a. However, the optional ARP sender hardware address rewrite is different. It writes through skb_store_bits() at an offset relative to skb->data: skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN) skb_header_pointer() only safely reads the ARP header; it does not make the later sender hardware address range writable. If that range is still held in a nonlinear skb fragment backed by a splice-imported file page, skb_store_bits() maps the frag page and copies the new MAC address directly into it. Ensure the ARP SHA range is writable before reading the ARP header and before calling skb_store_bits().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: reject oversized Broadcast Announcement prepend Existing advertising instances can already hold the maximum extended advertising payload. When hci_adv_bcast_annoucement() prepends the Broadcast Announcement service data to that payload, the combined data may no longer fit in the temporary buffer used to rebuild the advertising data. Reject that case before copying the existing payload and report the failure through the device log. This keeps the existing advertising data intact and avoids overrunning the temporary buffer.

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Add bounds checks for firmware log indices Add validation that read and write indices in the firmware log buffer are within valid bounds (< data_size) before using them. If out-of-bounds indices are encountered (from firmware), clamp them to safe values instead of proceeding with invalid offsets. This prevents potential out-of-bounds buffer access when firmware supplies invalid log indices.

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Add buffer overflow check in MS get_info_ioctl Add validation that the info size returned from the metric stream info query is not exceeded when checked against the allocated buffer size. If the firmware returns a size larger than the buffer, reject the operation with -EOVERFLOW instead of proceeding with an incorrect buffer copy.

In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr() build_i2c_fw_hdr() allocates a fixed-size buffer of (16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then copies le16_to_cpu(img_header->Length) bytes into it without validating that Length fits within the available space after the firmware record header. img_header->Length is a __le16 from the firmware file and can be up to 65535. check_fw_sanity() validates the total firmware size but not img_header->Length specifically. Fix by rejecting images where img_header->Length exceeds the available destination space.

In the Linux kernel, the following vulnerability has been resolved: USB: serial: kl5kusb105: fix bulk-out buffer overflow klsi_105_prepare_write_buffer() is called by the generic write path with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It stores a two-byte length header at the start of the buffer and copies the payload from the write fifo starting at buf + KLSI_HDR_LEN, but passes the full buffer size as the number of bytes to copy: count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size, &port->lock); When the fifo holds at least size bytes, size bytes are copied starting two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for the header as safe_serial already does. Writing bulk_out_size or more bytes to the tty triggers a slab out-of-bounds write, observed with KASAN by emulating the device with dummy_hcd and raw-gadget: BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0 Write of size 64 at addr ffff888112c62202 by task python3 kfifo_copy_out klsi_105_prepare_write_buffer [kl5kusb105] usb_serial_generic_write_start [usbserial] Allocated by task 139: usb_serial_probe [usbserial] The buggy address is located 2 bytes inside of allocated 64-byte region The out-of-bounds write no longer occurs with this change applied.

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Validate cpu_id against nr_cpu_ids in DMAH alloc The cpu_id attribute supplied by user space through UVERBS_ATTR_ALLOC_DMAH_CPU_ID is passed directly to cpumask_test_cpu() without first verifying that the value is within the valid CPU range. Passing such untrusted data to cpumask_test_cpu() may lead to an out-of-bounds read of the underlying cpumask bitmap: the helper expands to a test_bit() that indexes the bitmap by cpu_id / BITS_PER_LONG with no bound check. In addition, on kernels built with CONFIG_DEBUG_PER_CPU_MAPS it trips the WARN_ON_ONCE() in cpumask_check(); combined with panic_on_warn this turns a bad user input into a machine reboot. Reject any cpu_id that is not smaller than nr_cpu_ids with -EINVAL before it is used. Reported by Smatch.

In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix OOB write in ethosu_gem_cmdstream_copy_and_validate() The command stream parsing loop increments the index variable a second time when a 64-bit command word is encountered (bit 14 set), but does not re-check the loop bound before writing the second word: for (i = 0; i < size / 4; i++) { bocmds[i] = cmds[0]; if (cmd & 0x4000) { i++; bocmds[i] = cmds[1]; /* unchecked */ } } The buffer bocmds is backed by a DMA allocation of exactly size bytes from drm_gem_dma_create(ddev, size), giving valid indices [0, size/4-1]. When i == size/4 - 1 on entry to an iteration and bit 14 of cmds[0] is set, bocmds[size/4-1] is written in bounds, i is then incremented to size/4, and bocmds[size/4] writes four bytes past the end of the allocation. Userspace controls both the buffer contents and the size argument via the ioctl, making this a userspace-triggerable heap out-of-bounds write. Fix by checking the incremented index against the buffer bound before the second write and returning -EINVAL if the buffer is too small to contain the extended command.

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Clamp XDomain response data copy to allocation size tb_xdp_properties_request() derives the per-packet copy length from the response header without checking that it fits in the previously allocated data buffer. A malicious peer can set its length field larger than the declared data_length, causing memcpy to write past the kcalloc allocation. Clamp the per-packet copy length so that the cumulative offset never exceeds data_len.