Base de CVEs

In Bouncy Castle for Java FIPS (BC-FJA) before bc-fips 2.1.3, the native entropy source used on Intel platforms retried the CPU entropy instructions without any bound. RDSEED and RDRAND report failure through their carry flag, and the JNI seeding routine spun re-issuing the instruction for as long as that flag stayed clear, so a persistent failure of the on-chip entropy source - whether from a hardware fault, from the underlying DRBG being exhausted by contention across many cores, or from a hypervisor that does not provide the instruction - left the calling thread looping indefinitely inside the JNI call, where it could be neither interrupted nor timed out. Any operation drawing from the native entropy source could therefore hang, denying service to the application. The retry loops are now bounded (200 attempts for RDSEED and 20 for RDRAND, twice the baselines given in Intel's Digital Random Number Generator software implementation guide), pausing between attempts and, on exhaustion, clearing any partially written buffer and throwing rather than continuing to spin. The clear is performed by an un-elidable memzero, which uses a volatile pointer and an assembly memory barrier so that a compiler cannot optimise the erase away as a dead store. Bouncy Castle for Java (bcprov) is not affected, as it has no native entropy source; the 1.0.X and 2.0.X FIPS series are not affected.

Zephyr's IPv6 forwarding path re-sent routed unicast packets without ever decrementing the IPv6 hop limit. Both routing branches of ipv6_route_packet() (subsys/net/ip) were affected: the explicit-route path (net_route_packet()) and the on-link cross-interface path (net_route_packet_if()). Each set the packet forwarding flag and called net_send_data() with the hop limit untouched and no expiry check. Per RFC 8200 the hop-limit decrement is the mechanism that bounds packet lifetime and terminates routing loops; without it, a device acting as an IPv6 router relays looping packets indefinitely. An on-path attacker who can induce or exploit a transient L3 loop turns it into a permanent forwarding storm, causing CPU/bandwidth resource exhaustion (availability DoS) on the forwarder and adjacent links; path-discovery and loop diagnostics that rely on hop-limit expiry are also defeated. Affected configurations. In every affected release the forwarding path is reached via CONFIG_NET_ROUTE (enabled by default when CONFIG_NET_IPV6_NBR_CACHE is set), together with CONFIG_NET_ROUTING for cross-interface routing. Note that CONFIG_NET_IPV6_FORWARDING and CONFIG_NET_IPV4_FORWARDING — which appear in the fix and in this advisory's evidence notes — were introduced after v4.4.0, when the routing options were split and renamed; they do not exist in any affected release. When auditing a v4.4.1-or-earlier configuration, look for CONFIG_NET_ROUTE and CONFIG_NET_ROUTING. IPv4 is not affected in any release. The IPv4 forwarding path (net_route_ipv4_packet() in route_ipv4.c) was added after v4.4.0 and has never shipped in a release. Its TTL decrement and IPv4 header-checksum recomputation landed on main as part of the same fix, so the evidence notes below discuss it, but no released version is reachable by way of IPv4. Affected releases are v1.8.0 through v4.4.1: v1.8.0 introduced net_route_packet() and v2.2.0 added net_route_packet_if(), and neither decremented the hop limit. v4.3.1 carries the explicit-route fix but not the on-link one, so it is affected as well. Fixed on main by 7d8f1afa7345 (explicit-route path) and 589eadc74efa (on-link path).

Netty is an asynchronous, event-driven network application framework. Prior to versions 4.1.136.Final and 4.2.16.Final, the `Bzip2Decoder` handler in Netty's compression codec pipeline is vulnerable to a denial-of-service attack through a malformed bzip2 stream that permanently captures the event-loop thread in an infinite loop. The vulnerability exists in the run-length encoding (RLE) state machine within [`Bzip2BlockDecompressor.read()`]. This issue has been fixed in versions 4.1.136.Final and 4.2.16.Final.

nanoid (Nano ID) before 3.3.16 and 5.1.16 contains an infinite loop in the customAlphabet and nanoid functions of its non-secure module (nanoid/non-secure). When these functions are given a negative size, the loop counter is decremented from a negative value and never reaches its termination condition, spinning indefinitely and hanging the calling thread. An application that passes an unvalidated, attacker-controlled negative size to these functions is exposed to a denial-of-service condition.

nanoid (Nano ID) before 5.1.6 contains an infinite loop in the customAlphabet and customRandom functions. When these functions are configured with a size of 0, the internal generation loop never satisfies its exit condition and spins indefinitely, hanging the calling thread. An application that passes an unvalidated, attacker-controlled size of 0 to these functions is exposed to a denial-of-service condition.

facil.io 0.6.0 through 0.7.6 contains a denial-of-service vulnerability in the multipart body parser that allows an unauthenticated remote attacker to permanently freeze worker processes at 100% CPU by sending a multipart/form-data request with a partial closing boundary. The missing progress guard in the parser loop causes http_mime_parse to return 0 bytes consumed without setting done or error flags, causing the calling loop to re-invoke the parser on the same buffer indefinitely, exhausting all workers and permanently disabling the server until manually restarted.

Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Apache Thrift Python, Go, PHP and Java bindings.This issue affects Apache Thrift: before 0.24.0. Users are recommended to upgrade to version 0.24.0, which fixes the issue.

A flaw was found in libcupsfilters. The cfIEEE1284NormalizeMakeModel() function enters an infinite loop when processing a printer-advertised IEEE-1284 device ID with an empty model field, causing sustained CPU consumption. A network-adjacent attacker could exploit this by broadcasting a specially crafted printer advertisement, leading to denial of service.

FFmpeg versions 0.6.3 through 8.1.2 contain an infinite loop vulnerability in the RTP/ASF demuxer within libavformat/rtpdec_asf.c that allows remote attackers to cause denial of service by sending a crafted RTP/ASF stream. The rtp_asf_fix_header function fails to validate a minimum chunksize when iterating over ASF objects, causing the loop pointer to never advance when a chunksize is smaller than the 24-byte minimum ASF object header size, resulting in CPU exhaustion that denies service to legitimate users.

A norm.Iter can enter an infinite loop when handling input containing invalid UTF-8 bytes.

A flaw was found in libssh. Logic errors in automatic certificate-based public key authentication can cause libssh clients to loop indefinitely when configured certificates are missing or repeatedly rejected by a server, leading to denial of service.

xrdp is an open source RDP server. In versions 0.10.6 and prior, a n issue was discovered where the software fails to properly validate the totalLength field within the RDP protocol control header during packet reception. An unauthenticated remote attacker can exploit this vulnerability by sending a specially crafted packet that forces the xrdp process or thread into an infinite, CPU-bound loop. Because the internal pointer fails to advance and the deadlock prevention mechanism is bypassed for specific protocol data unit types, the process consumes excessive CPU resources indefinitely. This can render the xrdp service unavailable and potentially lead to system-wide resource exhaustion if multiple malicious connections are established. This issue has been fixed in version 0.10.6.1.

In the Linux kernel, the following vulnerability has been resolved: pds_core: fix error handling in pdsc_devcmd_wait Fix two cases where pdsc_devcmd_wait() returns stale success from the completion register instead of an error: 1. FW crash: If firmware stops running, the wait loop breaks early with running=false. The condition "if ((!done || timeout) && running)" is false, so error handling is bypassed and stale status is returned. Check !running first and return -ENXIO. 2. Timeout: If a command times out, err is set to -ETIMEDOUT but then overwritten by pdsc_err_to_errno(status) which reads stale status. Return -ETIMEDOUT immediately after cleaning up. Both errors now propagate to pdsc_devcmd_locked() which queues health_work for recovery.