CVE Intelligence
Início / CVEs

Base de CVEs

Vulnerabilidades publicadas, com severidade, exploração conhecida e fontes oficiais.

Severidade
Limpar

259 resultado(s)

Exportar esta busca: RSS · CSV · STIX
CVE-2026-13401 Alta · 7.5 CWE-835 16/07/2026
XML::Bare versions through 0.53 for Perl will hang in an infinite loop when parsing malformed attributes
XML::Bare versions through 0.53 for Perl will hang in an infinite loop when parsing malformed attributes. The parserc_parse function never advances the attribute-parse state cursor on certain malformed attribute forms, looping forever. Nameless attributes such as "<a ='c'>" or unbalanced quotes "<a b='''''''c'>" can trigger this condition.
CVE-2026-13397 Alta · 7.5 CWE-835 16/07/2026
HTML::Bare versions through 0.04 for Perl will hang in an infinite loop when parsing malformed attributes
HTML::Bare versions through 0.04 for Perl will hang in an infinite loop when parsing malformed attributes. The parserc_parse function never advances the attribute-parse state cursor on certain malformed attribute forms, looping forever. Nameless attributes such as "<a ='c'>" or unbalanced quotes "<a b='''''''c'>" can trigger this condition. Note that the latest version available on CPAN is version 0.02. Newer versions are available on the git repository.
CVE-2026-50647 Alta · 7.5 CWE-835 14/07/2026
Active Directory Federation Server Denial of Service Vulnerability
Loop with unreachable exit condition ('infinite loop') in Active Directory Federation Services (AD FS) allows an unauthorized attacker to deny service over a network.
CVE-2026-50324 Média · 5.9 CWE-835 14/07/2026
Windows Active Directory Federation Services Denial of Service Vulnerability
Loop with unreachable exit condition ('infinite loop') in Active Directory Federation Services (AD FS) allows an unauthorized attacker to deny service over a network.
CVE-2026-54119 Alta · 7.5 CWE-835 14/07/2026
Windows Active Directory Denial of Service Vulnerability
Loop with unreachable exit condition ('infinite loop') in Windows Active Directory allows an unauthorized attacker to deny service over a network.
CVE-2026-62642 Média · 6.5 CWE-835 14/07/2026
Infinite Loop em Roundcube Webmail
In Roundcube Webmail before 1.6.17 and 1.7.x before 1.7.2, an infinite loop was discovered in the TNEF decoder, which may lead to denial of service upon opening an email with a TNEF attachment.
CVE-2026-59203 Alta · 7.5 CWE-835 14/07/2026
Pillow EpsImagePlugin negative %%BeginBinary byte count causes infinite loop denial of service
Pillow is a Python imaging library. From 12.0.0 through 12.2.0, Pillow's EPS parser in PIL/EpsImagePlugin.py accepts a negative byte count in the %%BeginBinary directive, allowing a crafted EPS file to cause Image.open() to seek backwards to the same directive and parse it repeatedly in an infinite loop. This issue is fixed in version 12.3.0.
CVE-2026-55865 Alta · 7.1 CWE-835 09/07/2026
Python Liquid: Infinite loop when parsing malformed `{% case %}` tags
Python Liquid is a Python engine for the Liquid template language. Prior to 2.2.1, given a malformed {% case %} tag without an associated {% when %} or {% else %} block and no terminating {% endcase %} tag, Python Liquid hangs in an infinite loop at parse time because liquid.TokenStream.eof did not give the EOF token matching kind and value fields, allowing malicious template authors to craft templates for a denial of service attack. This issue is fixed in version 2.2.1.
CVE-2026-56289 Média · 5.5 CWE-835 09/07/2026
Loop with Unreachable Exit Condition in GNU patch
GNU patch is vulnerable to a denial of service (DoS) due to improper validation of hunk (single block of changes in diff) line offsets in unified-diff input. A specially crafted patch can specify an extremely large line number, causing the application to enter an effectively infinite processing loop while attempting to locate the requested position. This results in excessive CPU consumption and prevents the process from completing. An attacker can trigger this behavior by supplying a malicious patch file, causing the utility to become unresponsive and require manual termination. This issue has been fixed in the commit faba04ef4f2b410257f76c1b9dc85e350929c4b9
CVE-2026-15163 Alta · 7.5 CWE-835 08/07/2026
Loop with Unreachable Exit Condition ('Infinite Loop') in Wireshark
Multiple protocol dissector infinite loops in Wireshark 4.6.0 to 4.6.6 and 4.4.0 to 4.4.16 allow denial of service
CVE-2026-59935 Alta · 7.5 CWE-835 08/07/2026
pypdf: Possible infinite loop for not terminated inline images (ASCII85 and ASCIIHex filter)
pypdf is a free and open-source pure-python PDF library. Prior to 6.14.2, an attacker can craft a PDF with a page content stream containing a not terminated inline image that uses the ASCII85 or ASCIIHex filters, causing an infinite loop during parsing such as when extracting page text. This issue is fixed in version 6.14.2.
CVE-2026-59877 Alta · 7.5 CWE-835 08/07/2026
protobufjs: Denial of Service via infinite loop in .proto option parsing
protobufjs compiles protobuf definitions into JavaScript (JS) functions. Prior to 7.6.5 and 8.6.6, protobufjs parsed option names by advancing through schema tokens until reaching an = token without checking for end of input, so a crafted .proto schema that opens an option declaration and ends prematurely can cause parse, Root.load, or Root.loadSync to loop indefinitely. This issue is fixed in versions 7.6.5 and 8.6.6.
CVE-2026-59874 Alta · 7.5 CWE-835 08/07/2026
node-tar: Negative tar entry size causes infinite loop in archive replace
node-tar is a tar archive manipulation library for Node.js. Prior to 7.5.18, tar.replace accepts a checksum-valid tar header with a negative base-256 encoded entry size, causing the archive scanner to make no progress while repeatedly parsing the same header. This issue is fixed in version 7.5.18.
CVE-2026-11352 Alta · 7.5 CWE-835 03/07/2026
QUIC zero-length UDP datagrams busy-loop
An issue in curl’s QUIC UDP receive function allows a malicious HTTP/3 server to trigger a remote denial of service against a curl or libcurl client. Because the helper function discards zero-length UDP datagrams before counting them toward the per-call packet budget, a connected QUIC peer can continuously stream empty datagrams to indefinitely stall the client.
CVE-2026-6684 Média · 4.6 CWE-835 01/07/2026
FatFs Infinite Loop in GPT Partition Scan
FatFs prior to R0.16 that use GPT scanning with 'FF_LBA64 = 1' contains an issue where an unbounded loop count derived from GPT header field GPTH_PtNum, enabling extremely long or effectively infinite mount-time scans. This maps to CWE-835 (Loop with Unreachable Exit Condition). Estimated CVSS v3.1 vector: CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H (4.6, Medium). The estimated CISA SSVC vectors are Exploitation: PoC, Technical Impact: Partial.
CVE-2026-14258 Média · 6.5 CWE-835 01/07/2026
Dhcpcd: dhcpcd infinite loop and out-of-bounds read via zero-length ipv6 nd option in router advertisement handling
A flaw was found in dhcpcd's IPv6 Neighbor Discovery Router Advertisement processing. A specially crafted IPv6 Router Advertisement containing a zero-length Neighbor Discovery option can bypass validation during packet storage and later be reparsed without adequate validation, causing the parser to enter a non-advancing loop. Successful exploitation may result in excessive CPU consumption, leading to a denial of service.
CVE-2026-53312 Média · 5.5 CWE-835 26/06/2026
iommu/riscv: Remove overflows on the invalidation path
In the Linux kernel, the following vulnerability has been resolved: iommu/riscv: Remove overflows on the invalidation path Since RISC-V supports a sign extended page table it should support a gather->end of ULONG_MAX, but if this happens it will infinite loop because of the overflow. Also avoid overflow computing the length by moving the +1 to the other side of the <
CVE-2026-10642 Média · 4.6 CWE-835 24/06/2026
Unbounded TX busy-loop DoS in Zephyr PL011 UART driver under CTS hardware flow control
The Zephyr PL011 UART driver (drivers/serial/uart_pl011.c) contains an unbounded software loop in pl011_irq_tx_enable() that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit (PL011_IMSC_TXIM) is set, to work around the controller's level-transition TX-interrupt behavior. When CTS hardware flow control is enabled (devicetree hw-flow-control or runtime UART_CFG_FLOW_CTRL_RTS_CTS) and the wired serial peer de-asserts CTS, the controller stops draining the TX FIFO; pl011_fifo_fill() then returns 0 on every call while the application still has pending data and therefore never disables the TX interrupt. The loop condition never clears, so the thread that called uart_irq_tx_enable() (e.g. h4_send() in the Bluetooth HCI H4 driver) spins indefinitely, hanging the executing context and stalling the transport — a denial of service (CWE-835). An attacker controlling the device attached to the UART's CTS line can trigger the hang by withholding CTS during transmission. Because that peer is the device wired to the UART — which may be a removable or external module (e.g. an off-board Bluetooth controller on the HCI H4 link) rather than a permanently-bonded on-PCB part — the attack vector is scored Adjacent (AV:A) rather than Physical; the security subcommittee should confirm the vector against the specific deployment. Impact is availability only; there is no memory-safety, confidentiality, or integrity consequence. The vulnerable loop was introduced in commit b783bc8448ef (Feb 2025) and shipped in releases v4.1.0 through v4.4.0. The fix breaks out of the loop when CTS is blocking and arms the CTS modem-status interrupt to resume transmission when CTS re-asserts.
CVE-2026-54904 Alta · 7.5 CWE-835 24/06/2026
concurrent-ruby: `AtomicReference#update` livelocks when the stored value is `Float::NAN`
concurrent-ruby is a modern concurrency tools for Ruby. Prior to 1.3.7, Concurrent::AtomicReference#update can enter a permanent busy retry loop when the current value is Float::NAN. The issue is caused by the interaction between AtomicReference#update, which retries until compare_and_set(old_value, new_value) succeeds; Numeric compare_and_set, which checks old == old_value before attempting the underlying atomic swap.; and Ruby NaN semantics, where Float::NAN == Float::NAN is always false. As a result, once an AtomicReference contains Float::NAN, calling #update repeatedly evaluates the caller's block and never returns. In services that store externally derived numeric values in an AtomicReference, this can cause CPU exhaustion or permanent request/job hangs. This vulnerability is fixed in 1.3.7.
CVE-2026-52965 Média · 5.5 CWE-835 24/06/2026
drm/ttm: Fix ttm_bo_swapout() infinite LRU walk on swapout failure
In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Fix ttm_bo_swapout() infinite LRU walk on swapout failure When ttm_tt_swapout() fails, the current code calls ttm_resource_add_bulk_move() followed by ttm_resource_move_to_lru_tail() to restore the resource's bulk_move membership. However, ttm_resource_move_to_lru_tail() places the resource at the tail of the LRU list which, relative to the walk cursor's hitch node (placed immediately after the resource when it was yielded), puts the resource *in front of the* the hitch. The next list_for_each_entry_continue() from the hitch finds the same resource again, causing an infinite loop. Fix by deferring del_bulk_move to the success path only. On the success path, TTM_TT_FLAG_SWAPPED has just been set by ttm_tt_swapout() but the resource is still tracked in the bulk_move range, so ttm_resource_del_bulk_move()'s !ttm_resource_unevictable() guard would incorrectly skip the removal. Introduce ttm_resource_del_bulk_move_unevictable() which bypasses that guard.
CVE-2026-52933 Alta · 7.8 CWE-835 24/06/2026
io_uring/poll: fix signed comparison in io_poll_get_ownership()
In the Linux kernel, the following vulnerability has been resolved: io_uring/poll: fix signed comparison in io_poll_get_ownership() io_poll_get_ownership() uses a signed comparison to check whether poll_refs has reached the threshold for the slowpath: if (unlikely(atomic_read(&req->poll_refs) >= IO_POLL_REF_BIAS)) atomic_read() returns int (signed). When IO_POLL_CANCEL_FLAG (BIT(31)) is set in poll_refs, the value becomes negative in signed arithmetic, so the >= 128 comparison always evaluates to false and the slowpath is never taken. Fix this by casting the atomic_read() result to unsigned int before the comparison, so that the cancel flag is treated as a large positive value and correctly triggers the slowpath.
CVE-2026-52921 Média · 5.5 CWE-835 24/06/2026
netfilter: ipset: stop hash:* range iteration at end
In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: stop hash:* range iteration at end The following hash set variants: hash:ip,mark hash:ip,port hash:ip,port,ip hash:ip,port,net iterate IPv4 ranges with a 32-bit iterator. The iterator must stop once the last address in the requested range has been processed. Advancing it once more can move the traversal state past the end of the request, so a later retry may continue from an unintended position. Handle the iterator increment explicitly at the end of the loop and stop once the upper bound has been processed. This keeps the existing retry behaviour intact for valid ranges while preventing traversal from continuing past the original boundary.
CVE-2026-54651 Média · 5.5 CWE-835 22/06/2026
pypdf: Possible infinite loop when processing threads/articles in writer
pypdf is a free and open-source pure-python PDF library. Prior to 6.13.1, an attacker who uses this vulnerability can craft a PDF which leads to an infinite loop. This requires merging a file with threads/articles into a writer. This vulnerability is fixed in 6.13.1.
CVE-2026-54531 Média · 5.5 CWE-835 22/06/2026
pypdf: Possible infinite loop when processing outlines/bookmarks in writer
pypdf is a free and open-source pure-python PDF library. Prior to 6.13.0, an attacker who uses this vulnerability can craft a PDF which leads to an infinite loop. This requires merging a file with outlines into a writer. This vulnerability is fixed in 6.13.0.
CVE-2026-54530 Média · 5.5 CWE-835 22/06/2026
pypdf: Possible infinite loop when retrieving fonts for layout-mode text extraction
pypdf is a free and open-source pure-python PDF library. Prior to 6.13.0, an attacker who uses this vulnerability can craft a PDF which leads to an infinite loop. This requires extracting the text in layout mode. This vulnerability is fixed in 6.13.0.