Vulnerabilidades do Juniper Networks Junos OS

An Integer Underflow (Wrap or Wraparound) vulnerability in the srxpfe of Juniper Networks Junos OS and Junos OS Evolved on the SRX Series allows an adjacent unauthenticated attacker to cause a forwarding-plane denial of service via an ICMP message associated with an SVR carrier session.

A Signed to Unsigned Conversion Error vulnerability in the srxpfe of Juniper Networks Junos OS on the SRX Series allows an adjacent attacker to cause a denial of service of the data plane via chassis-cluster fabric traffic.

A Reachable Assertion vulnerability in the srxpfe process of Juniper Networks Junos OS on SRX Series allows an adjacent network attacker to cause a denial of service of the data plane via malformed firewall-authentication synchronization traffic on chassis-cluster fabric interfaces.

An Out-of-bounds Write vulnerability in eventd of Juniper Networks Junos OS and Junos OS Evolved allows a local attacker to cause a Denial of Service (DoS) via sending a crafted packet to the eventd relay service.

A Use of Incorrectly-Resolved Name or Reference vulnerability in the URL filtering plugin of Juniper Networks Junos OS on MX Series allows an unauthenticated, network-based attacker to bypass web filtering and access downstream resources that should be unreachable. If an MX Series device is configured with web filtering, and an attacker sends a request with a specifically formatted URL, this request will get forwarded despite the system being configured to block it. In turn, an attacker can access downstream resources that are expected to be unreachable. This issue affects Junos OS on MX Series: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S5, * 24.4 versions before 24.4R2-S4, * 25.2 versions before 25.2R2-S1, * 25.4 versions before 25.4R1-S2, 25.4R2.

An Improper Handling of Undefined Parameters vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on EX Series devices allows an authenticated attacker with low privileges to cause a Denial-of-Service (DoS). If an attempt is made to subscribe to an unsupported telemetry sensor path on EX2300, EX3400, EX4000, EX4100 and EX4400 via gRPC, this causes the FPC to crash. This leads to a complete service outage until the module has automatically restarted.  The following log message can be seen when this issue happens: agentd[<PID>]: AGENTD_RESOURCE_NOT_FOUND: No resource name found for <sensor> This issue affects Junos OS on EX2300, EX3400, EX4000, EX4100 and EX4400 devices: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S5, * 24.4 versions before 24.4R2.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on MX Series allows adjacent subscribers to bypass configured firewall filters. On MX Series devices with MPC10/11, LC4800/9600, and MX304 with subscribers configured on static interfaces, ingress firewall filters are not enforced, so that neither protocol level nor upstream bandwidth limitation are in effect.  This issue affects Junos OS on MX with MPC10/11, LC4800/9600/4802, and MX304: * 23.2 versions from 23.2R2-S1 before 23.2R2-S7, * 23.4 versions from 23.4R2 before 23.4R2-S7, * 24.2 versions before 24.2R2-S3, * 24.4 versions before 24.4R2-S2, * 25.2 versions before 25.2R2.

A Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). As part of the stateful traffic processing on SRX Series devices flows are being established, and removed when not needed anymore. During the removal process the timeout of a flow should be set to 3 seconds and consequentially the flow should be removed shortly after. Due to a race condition occurring when setting the timeout there is a chance (the exact conditions are outside the attackers control) that the timeout is instead set to a very high value of larger than 10,000 seconds: user@host> show security flow session | match timeout Session ID: 98784248524, Policy name: PROD-FLOW/4, HA State: Active, Timeout: 85250, Session State: Valid This will lead to an accumulation of flows which can be observed by an ever-increasing value of invalidated sessions in the output of 'show security flow session summary': user@host> show security flow session summary | match invalid Invalidated sessions: 216931These sessions can't be cleared manually with the 'clear security flow session' command, which will either lead to forwarding to stop (and the system needs to be manually recovered with a reboot) or to a flowd core and automatic reboot. This issue affects Junos OS on SRX Series: * 24.2 versions before 24.2R2-S3, * 24.4 versions before 24.4R2-S1, 24.4R2-S2, * 25.2 versions before 25.2R1-S2, 25.2R2. This issue does not affect releases earlier than 24.2R1;

A Missing Release of Memory after Effective Lifetime vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on specific EX Series devices allows an unauthenticated adjacent attacker to cause a Denial-of-Service (DoS).When sFlow is configured in a Virtual Chassis (VC) scenario with EX4100 Series or EX4400 Series devices, multicast traffic which is received on one VC member and sent out on another member leads to a memory leak and ultimately an FPC crash and restart. The leak can be monitored by watching the continuous increase of the buffer values in the output of: user@host> show chassis fpc This issue affects Junos OS on EX4100 Series and EX4400: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S7, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2.

A Return of Pointer Value Outside of Expected Range vulnerability in the fileio library of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privilged attacker to cause a Denial-of-Service (DoS). On EX Series, QFX Series and MX Series a low-privileged attacker issuing a specific 'show l2-learning' or 'show ethernet-switching' command will cause an l2ald crash which will lead to a temporary service impact for all layer 2 services until the process has automatically restarted. This issue affects EX Series, QFX Series, MX Series: Junos OS: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S7, * 24.2 versions before 24.2R2, * 24.4 versions before 24.4R1-S2. Junos OS Evolved: * all versions before 23.2R2-S7-EVO, * 23.4 versions before 23.4R2-S8-EVO, * 24.2 versions before 24.2R2-EVO, * 24.4 versions before 24.4R1-S3-EVO.

A Use of Multiple Resources with Duplicate Identifier vulnerability in the IKE daemon (iked) of Juniper Networks Junos OS on MX with SPC3 and SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). On an MX with SPC3 and SRX devices configured for VPN service, when a large number of VPN negotiations fail a peer index rollover will eventually occur. As a result, new peers are assigned index values that are already in use and the iked process starts to crash repeatedly. This results in failure to establish new VPN connections and rekeying existing ones. To restore service the system must be rebooted. Please note that the index value can't be monitored, so customers should monitor tunnel up and down events and if a lot of events occur over an extended period of time it becomes likely that this issue occurs. To be exposed to this issue the system needs to run iked (vs. kmd which is not affected), which can be verified with: user@host> show system processes extensive | match "KMD|IKED" This issue affects Junos OS on MX with SPC3, SRX Series: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S6, * 24.2 versions before 24.2R2-S3, * 24.4 versions before 24.4R2-S4, * 25.2 versions before 25.2R1-S1.