CVE Intelligence

Vulnerabilidades do Linux Linux Kernel

🔔 Criar alerta RSS Verificador de versão

CVEs publicadas que afetam Linux Linux Kernel: 4240 registro(s), com versões afetadas e correções.
cpe:2.3:o:linux:linux_kernel

CVE-2026-64215 Média · 5.5 CWE-476 24/07/2026
drm/msm/a6xx: Check kzalloc return in a8xx_hfi_send_perf_table
In the Linux kernel, the following vulnerability has been resolved: drm/msm/a6xx: Check kzalloc return in a8xx_hfi_send_perf_table Check the return value of kzalloc() to prevent a NULL pointer dereference on allocation failure. Patchwork: https://patchwork.freedesktop.org/patch/721342/
CVE-2026-64214 Média · 5.5 CWE-476 24/07/2026
powerpc/time: Remove redundant preempt_disable|enable() calls from arch_irq_work_raise()
In the Linux kernel, the following vulnerability has been resolved: powerpc/time: Remove redundant preempt_disable|enable() calls from arch_irq_work_raise() A kernel panic is observed when handling machine check exceptions from real mode. BUG: Unable to handle kernel data access on read at 0xc00000006be21300 Oops: Kernel access of bad area, sig: 11 [#1] MSR: 8000000000001003 <SF,ME,RI,LE> CR: 88222248 XER: 00000005 CFAR: c00000000003ffc4 DAR: c00000006be21300 DSISR: 40000000 IRQMASK: 0 NIP [c000000000029e40] arch_irq_work_raise+0x10/0x70 LR [c00000000003ffc8] machine_check_queue_event+0xa8/0x150 Call Trace: [c0000000179d3c70] [c00000000003ff64] machine_check_queue_event+0x44/0x150 [c0000000179d3d30] [c0000000000084e0] machine_check_early_common+0x1f0/0x2c0 The crash occurs because arch_irq_work_raise() calls preempt_disable() from machine check exception (MCE) handlers running in real mode. In this context, accessing the preempt_count can fault, leading to the panic. The preempt_disable()/preempt_enable() pair in arch_irq_work_raise() was originally added by commit 0fe1ac48bef0 ("powerpc/perf_event: Fix oops due to perf_event_do_pending call") to avoid races while raising irq work from exception context. Later, commit 471ba0e686cb ("irq_work: Do not raise an IPI when queueing work on the local CPU") added preemption protection in irq_work_queue() path, while commit 20b876918c06 ("irq_work: Use per cpu atomics instead of regular atomics") added equivalent protection in irq_work_queue_on() before reaching arch_irq_work_raise(): irq_work_queue() / irq_work_queue_on() -> preempt_disable() -> __irq_work_queue_local() -> irq_work_raise() -> arch_irq_work_raise() As a result, callers other than mce_irq_work_raise() already execute with preemption disabled, making the additional preempt_disable()/preempt_enable() pair in arch_irq_work_raise() redundant. The arch_irq_work_raise() function executes in NMI context when called from MCE handler. Hence we will not be preempted or scheduled out since we are in NMI context with MSR[EE]=0. Therefore, it is safe to remove the preempt_disable()/preempt_enable() calls from here. Remove it to avoid accessing preempt_count from real mode context. [Maddy: Fixed the commit title]
CVE-2026-64213 Média · 5.5 24/07/2026
hwmon: (lm90) Add lock protection to lm90_alert
In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm90) Add lock protection to lm90_alert Sashiko reports: lm90_alert() executes in the smbus alert context and calls lm90_update_confreg() to disable the hardware alert line, without acquiring hwmon_lock. Concurrently, sysfs write operations (such as lm90_write_convrate) hold the hwmon_lock, temporarily modify data->config, and then restore it. If an alert interrupt occurs concurrently with a sysfs write, the sysfs path will overwrite the alert handler's modifications to data->config and the hardware register. This unintentionally re-enables the hardware alert line while the alarm is still active, causing an interrupt storm. Add the missing lock to lm90_alert() to solve the problem.
CVE-2026-64212 Média · 5.5 CWE-476 24/07/2026
NULL Pointer Dereference em Linux Linux Kernel
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: don't dereference a pointer before NULL checking it In iwl_mld_remove_link, the link->fw_id is saved at the beginning of the function so we have it after we freed the link. But the link pointer can be NULL, and is not checked when the fw_id is stored. Fix it by simply freeing the link at the end of the function. fFixes: 0e66a39f4f0e ("wifi: iwlwifi: fix potential use after free in iwl_mld_remove_link()")
CVE-2026-64211 Média · 5.5 24/07/2026
srcu: Don't queue workqueue handlers to never-online CPUs
In the Linux kernel, the following vulnerability has been resolved: srcu: Don't queue workqueue handlers to never-online CPUs While an srcu_struct structure is in the midst of switching from CPU-0 to all-CPUs state, it can attempt to invoke callbacks for CPUs that have never been online. Worse yet, it can attempt in invoke callbacks for CPUs that never will be online, even including imaginary CPUs not in cpu_possible_mask. This can cause hangs on s390, which is not set up to deal with workqueue handlers being scheduled on such CPUs. This commit therefore causes Tree SRCU to refrain from queueing workqueue handlers on CPUs that have not yet (and might never) come online. Because callbacks are not invoked on CPUs that have not been online, it is an error to invoke call_srcu(), synchronize_srcu(), or synchronize_srcu_expedited() on a CPU that is not yet fully online. However, it turns out to be less code to redirect the callbacks from too-early invocations of call_srcu() than to warn about such invocations. This commit therefore also redirects callbacks queued on not-yet-fully-online CPUs to the boot CPU.
CVE-2026-64210 Alta · 7.5 24/07/2026
net/mlx5e: xsk: Fix unlocked writing to ICOSQ
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix unlocked writing to ICOSQ During napi poll, when the affinity changes and there's still XSK work to be done, we trigger an ICOSQ interrupt on the new CPU. However, this triggering on the ICOSQ is done unprotected. There are 2 such races: A) mlx5e_trigger_irq() is called while mlx5e_xsk_alloc_rx_mpwqe() is running from a different CPU due to affinity change. This can happen because IRQ triggering is done after napi_complete_done(). At this point the NAPI can be scheduled on a different CPU. Like this: CPU A (old affinity, NAPI tail) CPU B (new affinity, fresh NAPI) ------------------------------- -------------------------------- napi_complete_done() clears SCHED mlx5e_cq_arm(...) napi_schedule_prep() sets SCHED mlx5e_napi_poll() mlx5e_xsk_alloc_rx_mpwqe() mlx5e_icosq_sync_lock() // noop memcpy 640 B UMR body advance sq->pc by 10 mlx5e_trigger_irq(&c->icosq) wqe_info[pi] = {NOP, 1} mlx5e_post_nop() advances sq->pc B) mlx5e_trigger_irq() is called on the ICOSQ when mlx5e_trigger_napi_icosq() is running. The obvious fix would be to lock the ICOSQ. But ICOSQ has an optimized locking scheme that doesn't work for this scenario. Kick the async ICOSQ instead which is always locked. This issue was noticed in the wild with the following splat: netdevice: ge-0-0-1: Bad OP in ICOSQ CQE: 0xd WARNING: drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:826 [...] [...] Call Trace: <IRQ> mlx5e_napi_poll+0x11d/0x7f0 [mlx5_core] __napi_poll+0x30/0x200 ? skb_defer_free_flush+0x9c/0xc0 net_rx_action+0x2fe/0x3f0 handle_softirqs+0xd8/0x340 __irq_exit_rcu+0xbc/0xe0 common_interrupt+0x85/0xa0 </IRQ> <TASK> asm_common_interrupt+0x26/0x40 [...] ---[ end trace 0000000000000000 ]--- mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2022, qn 0x8f4, opcode 0xd, syndrome 0x2, vendor syndrome 0x68 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 01 00 68 02 01 00 08 f4 de 14 59 d2 WQE DUMP: WQ size 16384 WQ cur size 0, WQE index 0x1e14, len: 64 00000000: 00 00 00 01 d9 ed 80 02 00 00 00 01 d9 ed 90 02 00000010: 00 00 00 01 d9 ed a0 02 00 00 00 01 d9 ed b0 02 00000020: 00 00 00 01 d9 ed c0 02 00 00 00 01 d9 ed d0 02 00000030: 00 00 00 01 d9 ed e0 02 00 00 00 01 d9 ed f0 02 mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2023, qn 0x8f4, opcode 0xd, syndrome 0x5, vendor syndrome 0xf9 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 01 00 f9 05 01 00 08 f4 de 15 cf d2
CVE-2026-64209 Alta · 7.1 CWE-125 24/07/2026
phy: qcom: qmp-usbc: Fix out-of-bounds array access in dp swing config
In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usbc: Fix out-of-bounds array access in dp swing config swing_tbl and pre_emphasis_tbl are 4x4 arrays (valid indices 0-3), but the boundary check uses "> 4" instead of ">= 4", allowing index 4 to cause an out-of-bounds access.
CVE-2026-64208 Alta · 7.5 24/07/2026
crypto/krb5, rxrpc: Fix lack of pre-decrypt/pre-verify length checks
In the Linux kernel, the following vulnerability has been resolved: crypto/krb5, rxrpc: Fix lack of pre-decrypt/pre-verify length checks Change the krb5 crypto library to provide facilities to precheck the length of the message about to be decrypted or verified. Fix AF_RXRPC to make use of this to validate DATA packets secured with RxGK.
CVE-2026-64600 Alta · 7.8 CWE-362 23/07/2026
xfs: resample the data fork mapping after cycling ILOCK
In the Linux kernel, the following vulnerability has been resolved: xfs: resample the data fork mapping after cycling ILOCK xfs_reflink_fill_{cow_hole,delalloc} are both presented with an inode, a data fork mapping, and a cow fork mapping. Unfortunately, these two helpers cycle the ILOCK to grab a transaction, which means that the mappings are stale as soon as we reacquire the ILOCK. Currently we refresh the cow fork mapping by re-calling xfs_find_trim_cow_extent, but we don't refresh the data fork mapping beforehand, which means that the xfs_bmap_trim_cow in that function queries the refcount btree about the wrong physical blocks and returns an inaccurate value in *shared. If *shared is now false, the directio write proceeds with a stale data fork mapping. Fix this by querying the data fork mapping if the sequence counter changes across the ILOCK cycle.
CVE-2026-64207 Média · 5.5 CWE-476 20/07/2026
net/sched: dualpi2: fix GSO backlog accounting
In the Linux kernel, the following vulnerability has been resolved: net/sched: dualpi2: fix GSO backlog accounting When DualPI2 splits a GSO skb into N segments, it propagates N additional packets to its parent before returning NET_XMIT_SUCCESS. The parent then accounts for the original skb once more, leaving its qlen one larger than the number of packets actually queued. With QFQ as the parent, after all real packets are dequeued, QFQ still has a non-zero qlen while its in-service aggregate has no active classes. qfq_choose_next_agg() returns NULL and qfq_dequeue() passes the result to qfq_peek_skb(), causing a NULL pointer dereference. Follow the same pattern used by tbf_segment() and taprio: count only successfully queued segments, propagate the difference between the original skb and those segments, and return NET_XMIT_SUCCESS whenever at least one segment was queued.
CVE-2026-64206 Alta · 8.8 20/07/2026
Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock l2cap_conn_del() takes conn->lock and then calls cancel_work_sync() for pending_rx_work. process_pending_rx() takes the same mutex, so teardown can deadlock against the worker it is flushing. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the l2cap_conn_ready() -> queue_work(..., &conn->pending_rx_work) submit path, the l2cap_conn_del() -> cancel_work_sync(&conn->pending_rx_work) teardown path, and the process_pending_rx() -> mutex_lock(&conn->lock) worker edge. Lockdep WARNING: possible circular locking dependency detected process_pending_rx+0x21/0x2a [vuln_msv] l2cap_conn_del.constprop.0+0x3f/0x4e [vuln_msv] *** DEADLOCK *** Cancel pending_rx_work before taking conn->lock, matching the existing lock-before-drain ordering used for the two delayed works in the same teardown path. The pending_rx queue is still purged after the work has been cancelled and conn->lock has been acquired.
CVE-2026-64205 Média · 5.5 20/07/2026
i2c: i801: fix hardware state machine corruption in error path
In the Linux kernel, the following vulnerability has been resolved: i2c: i801: fix hardware state machine corruption in error path A severe livelock and subsequent Hung Task panic were observed in the i2c-i801 driver during concurrent Fuzzing. The crash is caused by an unconditional hardware register cleanup in the error handling path of i801_access(). When i801_check_pre() fails (e.g., returning -EBUSY because the SMBus controller is actively used by BIOS/ACPI), the kernel does not actually acquire the hardware ownership. However, the code jumps to the 'out' label and executes: iowrite8(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv)); This forcefully clears the INUSE_STS lock and resets the hardware status flags without owning the controller. Doing so interrupts ongoing BIOS/ACPI transactions and totally corrupts the SMBus hardware state machine. Consequently, all subsequent i801_access() calls fail at the pre-check stage, triggering an endless stream of "SMBus is busy, can't use it!" error logs. Over a slow serial console, this printk flood monopolizes the CPU (Console Livelock), starving other processes trying to acquire the mmap_lock down_read semaphore, ultimately triggering the hung task watchdog. Fix this by moving the 'out' label below the hardware register cleanup. If i801_check_pre() fails, we safely bypass the iowrite8() and only release the software locks (pm_runtime and mutex), strictly adhering to the rule of not releasing resources that were never acquired.
CVE-2026-64192 Média · 5.5 CWE-476 20/07/2026
bpf: Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitialized
In the Linux kernel, the following vulnerability has been resolved: bpf: Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitialized When CONFIG_BPF_LSM=y is set, BPF inode storage maps (BPF_MAP_TYPE_INODE_STORAGE) are compiled into the kernel. However, if the BPF LSM is not explicitly enabled at boot time (e.g. omitted from the "lsm=" boot parameter), lsm_prepare() is never executed for the BPF LSM. Consequently, the BPF inode security blob offset (bpf_lsm_blob_sizes.lbs_inode) is never initialized and remains at its default compiled size of 8 bytes instead of being updated to a valid offset past the reserved struct rcu_head (typically 16 bytes or more). When a privileged user creates and updates a BPF_MAP_TYPE_INODE_STORAGE map, bpf_inode() evaluates inode->i_security + 8. This erroneously aliases the struct rcu_head.func callback pointer at the beginning of the inode->i_security blob. During subsequent map element cleanup or inode destruction, writing NULL to owner_storage clears the queued RCU callback pointer. When rcu_do_batch() later executes the queued callback, it attempts an instruction fetch at address 0x0, triggering an immediate kernel panic. Fix this by introducing a global bpf_lsm_initialized boolean flag marked with __ro_after_init. Set this flag to true inside bpf_lsm_init() when the LSM framework successfully registers the BPF LSM. Gate map allocation in inode_storage_map_alloc() on this flag, returning -EOPNOTSUPP if the BPF LSM is in turn uninitialized. This fail-fast approach prevents userspace from allocating inode storage maps when the supporting BPF LSM infrastructure is absent, avoiding zombie map states.
CVE-2026-64191 Alta · 7.8 CWE-125 20/07/2026
i2c: stub: Reject I2C block transfers with invalid length
In the Linux kernel, the following vulnerability has been resolved: i2c: stub: Reject I2C block transfers with invalid length The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0] as the transfer length. The existing check only clamps it to avoid overrunning the chip->words[256] register array, but does not validate it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union i2c_smbus_data.block buffer (34 bytes total). The driver is a development/test tool (CONFIG_I2C_STUB=m, not built by default) that must be loaded with a chip_addr= parameter. A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing stub_xfer() to read or write past the end of the union i2c_smbus_data.block buffer: BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223) Read of size 1 at addr ffff88800abcfd92 by task exploit/81 Call Trace: <TASK> stub_xfer (drivers/i2c/i2c-stub.c:223) __i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593) i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536) i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391) i2cdev_ioctl (drivers/i2c/i2c-dev.c:478) __x64_sys_ioctl (fs/ioctl.c:583) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> The bug exists because i2c-stub implements .smbus_xfer directly, bypassing the I2C_SMBUS_BLOCK_MAX validation in i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same function correctly validates against I2C_SMBUS_BLOCK_MAX, but the I2C_SMBUS_I2C_BLOCK_DATA case does not. Fix by rejecting transfers with data->block[0] == 0 or data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with both the I2C_SMBUS_BLOCK_DATA case in the same function and the I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated().
CVE-2026-64190 Média · 5.5 CWE-476 20/07/2026
net: team: fix NULL pointer dereference in team_xmit during mode change
In the Linux kernel, the following vulnerability has been resolved: net: team: fix NULL pointer dereference in team_xmit during mode change __team_change_mode() clears team->ops with memset() before restoring safe dummy handlers via team_adjust_ops(). A concurrent team_xmit() running under RCU on another CPU can read team->ops.transmit during this window and call a NULL function pointer, crashing the kernel. The race requires a mode change (CAP_NET_ADMIN) concurrent with transmit on the team device. BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: 0010 [#1] SMP KASAN NOPTI RIP: 0010:0x0 Call Trace: team_xmit (drivers/net/team/team_core.c:1853) dev_hard_start_xmit (net/core/dev.c:3904) __dev_queue_xmit (net/core/dev.c:4871) packet_sendmsg (net/packet/af_packet.c:3109) __sys_sendto (net/socket.c:2265) The original code assumed that no ports means no traffic, so mode changes could freely memset()/memcpy() the ops. AF_PACKET with forced carrier breaks that assumption. Prevent the race instead of making it safe: replace memset()/memcpy() with per-field updates that never touch transmit or receive. Those two handlers are managed solely by team_adjust_ops(), which already installs dummies when tx_en_port_count == 0 (always true during mode change since no ports are present). WRITE_ONCE/READ_ONCE prevent store/load tearing on the handler pointers. synchronize_net() before exit_op() drains in-flight readers that may still reference old mode state from before port removal switched the handlers to dummies.
CVE-2026-64189 Alta · 7.8 CWE-362 20/07/2026
netfilter: ipset: fix race between dump and ip_set_list resize
In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix race between dump and ip_set_list resize The release path of ip_set_dump_do() and ip_set_dump_done() read inst->ip_set_list via ip_set_ref_netlink(), a plain rcu_dereference_raw() of the array pointer. These run from netlink_recvmsg() without the nfnl mutex and without an RCU read-side critical section. A concurrent ip_set_create() can grow the array: it publishes the new array, calls synchronize_net() and then kvfree()s the old one. Since the dump paths read the array outside any RCU reader, synchronize_net() does not wait for them and the old array can be freed while they still index into it, causing a use-after-free. The dumped set itself stays pinned via set->ref_netlink, so only the array load needs protecting. Take rcu_read_lock() around it, matching ip_set_get_byname() and __ip_set_put_byindex(). BUG: KASAN: slab-use-after-free in ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) Read of size 8 at addr ffff88800b5c4018 by task exploit/150 Call Trace: ... kasan_report (mm/kasan/report.c:595) ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) netlink_dump (net/netlink/af_netlink.c:2325) netlink_recvmsg (net/netlink/af_netlink.c:1976) sock_recvmsg (net/socket.c:1159) __sys_recvfrom (net/socket.c:2315) ... Oops: general protection fault, probably for non-canonical address ... KASAN NOPTI KASAN: maybe wild-memory-access in range [0x02d6...d0-0x02d6...d7] RIP: 0010:ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1698) Kernel panic - not syncing: Fatal exception
CVE-2026-64188 Alta · 7.8 CWE-416 20/07/2026
net: qualcomm: rmnet: fix endpoint use-after-free in rmnet_dellink()
In the Linux kernel, the following vulnerability has been resolved: net: qualcomm: rmnet: fix endpoint use-after-free in rmnet_dellink() rmnet_dellink() removes the endpoint from the hash table with hlist_del_init_rcu() and then immediately frees it with kfree(). However, RCU readers on the receive path (rmnet_rx_handler -> __rmnet_map_ingress_handler) may still hold a reference to the endpoint and dereference ep->egress_dev after the memory has been freed. The endpoint is a kmalloc-32 object, and the stale read at offset 8 corresponds to the egress_dev pointer. BUG: unable to handle page fault for address: ffffffffde942eef Oops: 0002 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 137 Comm: poc_write Not tainted 7.0.0+ #4 PREEMPTLAZY RIP: 0010:rmnet_vnd_rx_fixup (rmnet_vnd.c:27) Call Trace: <TASK> __rmnet_map_ingress_handler (rmnet_handlers.c:48 rmnet_handlers.c:101) rmnet_rx_handler (rmnet_handlers.c:129 rmnet_handlers.c:235) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6096) __netif_receive_skb_one_core (net/core/dev.c:6208) netif_receive_skb (net/core/dev.c:6467) tun_get_user (drivers/net/tun.c:1955) tun_chr_write_iter (drivers/net/tun.c:2003) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) </TASK> Add an rcu_head field to struct rmnet_endpoint and replace kfree() with kfree_rcu() so the endpoint memory remains valid through the RCU grace period. Also remove the rmnet_vnd_dellink() call and inline only the nr_rmnet_devs decrement, since rmnet_vnd_dellink() would set ep->egress_dev to NULL during the grace period, creating a data race with lockless readers.
CVE-2026-64187 Média · 5.5 CWE-476 20/07/2026
xfs: fail recovery on a committed log item with no regions
In the Linux kernel, the following vulnerability has been resolved: xfs: fail recovery on a committed log item with no regions If the first op of a transaction is a bare transaction header (len == sizeof(struct xfs_trans_header)), xlog_recover_add_to_trans() adds an item but no region, leaving it on r_itemq with ri_cnt == 0 and ri_buf == NULL. The header can be split across op records, so later ops may still add regions; the item is only invalid if the transaction commits with none. The runtime commit path never emits such a transaction, so this only happens on a crafted log. It came from an AI-assisted code audit of the recovery parser. xlog_recover_reorder_trans() calls ITEM_TYPE() on the item, which reads *(unsigned short *)item->ri_buf[0].iov_base and faults on the NULL ri_buf. Reject it there, before the commit handlers that also read ri_buf[0]. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:xlog_recover_reorder_trans (fs/xfs/xfs_log_recover.c:1836) xlog_recover_commit_trans (fs/xfs/xfs_log_recover.c:2043) xlog_recover_process_data (fs/xfs/xfs_log_recover.c:2501) xlog_do_recovery_pass (fs/xfs/xfs_log_recover.c:3244) xlog_recover (fs/xfs/xfs_log_recover.c:3493) xfs_log_mount (fs/xfs/xfs_log.c:618) xfs_mountfs (fs/xfs/xfs_mount.c:1034) xfs_fs_fill_super (fs/xfs/xfs_super.c:1938) vfs_get_tree (fs/super.c:1695) path_mount (fs/namespace.c:4161) __x64_sys_mount (fs/namespace.c:4367)
CVE-2026-64186 Alta · 7.1 CWE-125 19/07/2026
iommu/amd: Remove latent out-of-bounds access in IOMMU debugfs
In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Remove latent out-of-bounds access in IOMMU debugfs In iommu_mmio_write() and iommu_capability_write(), the variables dbg_mmio_offset and dbg_cap_offset are declared as int. However, they are populated using kstrtou32_from_user(). If a user provides a sufficiently large value, it can become a negative integer. Prior to this patch, the AMD IOMMU debugfs implementation was already protected by different mechanisms. 1. #define OFS_IN_SZ 8 ensures the user string <= 8 bytes, so e.g. 0xffffffff isn't a valid input. if (cnt > OFS_IN_SZ) return -EINVAL; 2. Implicit type promotion in iommu_mmio_write(), dbg_mmio_offset is int and iommu->mmio_phys_end is u64 if (dbg_mmio_offset > iommu->mmio_phys_end - sizeof(u64)) return -EINVAL; 3. The show handlers would currently catch the negative number and refuse to perform the read. Replace kstrtou32_from_user() with kstrtos32_from_user() to parse the input, and check for negative values to explicitly prevent out-of-bounds memory accesses directly in iommu_mmio_write() and iommu_capability_write().
CVE-2026-64185 Média · 5.5 19/07/2026
sysfs: don't remove existing directory on update failure
In the Linux kernel, the following vulnerability has been resolved: sysfs: don't remove existing directory on update failure When sysfs_update_group() is called for a named group and create_files() fails (e.g. -ENOMEM), internal_create_group() calls kernfs_remove(kn) on the group directory. In the update path, kn was obtained via kernfs_find_and_get() and refers to a directory that already existed before this call. Removing it silently destroys a sysfs group that the caller did not create. Only remove the directory if we created it ourselves. On update failure the directory remains as it is left empty by remove_files() inside create_files(), but can be repopulated by a retry.
CVE-2026-64184 Média · 5.5 19/07/2026
mm/damon/sysfs-schemes: call missing mem_cgroup_iter_break()
In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: call missing mem_cgroup_iter_break() damon_sysfs_memcg_path_to_id() breaks mem_cgroup_iter() loop without calling mem_cgroup_iter_break(). This leaks the cgroup reference. Fix the issue by calling mem_cgroup_iter_break() before the break. The issue was discovered [1] by Sashiko.
CVE-2026-64183 Média · 5.5 CWE-476 19/07/2026
efi: Allocate runtime workqueue before ACPI init
In the Linux kernel, the following vulnerability has been resolved: efi: Allocate runtime workqueue before ACPI init Since commit 5894cf571e14 ("acpi/prmt: Use EFI runtime sandbox to invoke PRM handlers") ACPI PRM calls are delegated to a workqueue which runs in a kernel thread, making it easier to detect and mitigate faulting memory accesses performed by the firmware. Rafael reports that such PRM accesses may occur before efisubsys_init() executes, which is where the workqueue is allocated, leading to NULL pointer dereferences. Since acpi_init() [which triggers the early PRM accesses] executes as a subsys_initcall() as well, and has its own dependencies that may be sensitive to initcall ordering, deferring acpi_init() is not an option. So instead, split off the workqueue allocation into its own postcore initcall, as this is the only missing piece to allow EFI runtime calls to be made. This ensures that EFI runtime call (including PRM calls) are accessible to all code running at subsys_initcall() level.
CVE-2026-64182 Média · 5.5 19/07/2026
drivers/base/memory: fix memory block reference leak in poison accounting
In the Linux kernel, the following vulnerability has been resolved: drivers/base/memory: fix memory block reference leak in poison accounting memblk_nr_poison_inc() and memblk_nr_poison_sub() look up a memory block via find_memory_block_by_id(), which acquires a reference to the memory block device. Both helpers use the returned memory block without dropping that reference, leaking the device reference on each successful lookup. Drop the reference after updating nr_hwpoison.
CVE-2026-64181 Alta · 7.8 19/07/2026
mm: fix __vm_normal_page() to handle missing support for pmd_special()/pud_special()
In the Linux kernel, the following vulnerability has been resolved: mm: fix __vm_normal_page() to handle missing support for pmd_special()/pud_special() On x86 32-bit with THP enabled, zap_huge_pmd() is seen to generate a "WARNING: mm/memory.c:735 at __vm_normal_page+0x6a/0x7d", from the VM_WARN_ON_ONCE(is_zero_pfn(pfn) || is_huge_zero_pfn(pfn)); followed by "BUG: Bad rss-counter state"s, then later "BUG: Bad page state"s when reclaim gets to call shrink_huge_zero_folio_scan(). It's as if the _PAGE_SPECIAL bit never got set in the huge_zero pmd: and indeed, whereas pte_special() and pte_mkspecial() are subject to a dedicated CONFIG_ARCH_HAS_PTE_SPECIAL, pmd_special() and pmd_mkspecial() are subject to CONFIG_ARCH_SUPPORTS_PMD_PFNMAP, which is never enabled on any 32-bit architecture. While the problem was exposed through commit d80a9cb1a64a ("mm/huge_memory: add and use normal_or_softleaf_folio_pmd()"), it was an oversight in commit af38538801c6 ("mm/memory: factor out common code from vm_normal_page_*()") and would result in other problems: * huge zero folio accounted in smaps, pagemap (PAGE_IS_FILE) and numamaps as file-backed THP * folio_walk_start() returning the folio even without FW_ZEROPAGE set. Callers seem to tolerate that, though. ... and triggering the VM_WARN_ON_ONE(), although never reported so far. To fix it, teach vm_normal_page_pmd()/vm_normal_page_pud() to consider whether pmd_special/pud_special is actually implemented.
CVE-2026-64180 Média · 5.5 19/07/2026
mm/memory_hotplug: fix memory block reference leak on remove
In the Linux kernel, the following vulnerability has been resolved: mm/memory_hotplug: fix memory block reference leak on remove Patch series "mm: Fix memory block leaks and locking", v2. This series fixes two memory block device reference leaks and one locking issue around the per-memory_block hwpoison counter. This patch (of 2): remove_memory_blocks_and_altmaps() looks up each memory block with find_memory_block(), which acquires a reference to the memory block device. That reference is never dropped on this path, resulting in a leaked device reference when removing memory blocks and their altmaps. Drop the reference after retrieving mem->altmap and clearing mem->altmap, before removing the memory block device.