CVE Intelligence

Vulnerabilidades do Linux Linux Kernel

🔔 Criar alerta RSS Verificador de versão

CVEs publicadas que afetam Linux Linux Kernel: 4523 registro(s), com versões afetadas e correções.
cpe:2.3:o:linux:linux_kernel

CVE-2026-43068 Média · 5.5 CWE-401 05/05/2026
ext4: avoid allocate block from corrupted group in ext4_mb_find_by_goal()
In the Linux kernel, the following vulnerability has been resolved: ext4: avoid allocate block from corrupted group in ext4_mb_find_by_goal() There's issue as follows: ... EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2243 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2239 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): error count since last fsck: 1 EXT4-fs (mmcblk0p1): initial error at time 1765597433: ext4_mb_generate_buddy:760 EXT4-fs (mmcblk0p1): last error at time 1765597433: ext4_mb_generate_buddy:760 ... According to the log analysis, blocks are always requested from the corrupted block group. This may happen as follows: ext4_mb_find_by_goal ext4_mb_load_buddy ext4_mb_load_buddy_gfp ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_wait_block_bitmap ext4_validate_block_bitmap if (!grp || EXT4_MB_GRP_BBITMAP_CORRUPT(grp)) return -EFSCORRUPTED; // There's no logs. if (err) return err; // Will return error ext4_lock_group(ac->ac_sb, group); if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) // Unreachable goto out; After commit 9008a58e5dce ("ext4: make the bitmap read routines return real error codes") merged, Commit 163a203ddb36 ("ext4: mark block group as corrupt on block bitmap error") is no real solution for allocating blocks from corrupted block groups. This is because if 'EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)' is true, then 'ext4_mb_load_buddy()' may return an error. This means that the block allocation will fail. Therefore, check block group if corrupted when ext4_mb_load_buddy() returns error.
CVE-2026-43067 Crítica · 9.8 CWE-822 05/05/2026
ext4: handle wraparound when searching for blocks for indirect mapped blocks
In the Linux kernel, the following vulnerability has been resolved: ext4: handle wraparound when searching for blocks for indirect mapped blocks Commit 4865c768b563 ("ext4: always allocate blocks only from groups inode can use") restricts what blocks will be allocated for indirect block based files to block numbers that fit within 32-bit block numbers. However, when using a review bot running on the latest Gemini LLM to check this commit when backporting into an LTS based kernel, it raised this concern: If ac->ac_g_ex.fe_group is >= ngroups (for instance, if the goal group was populated via stream allocation from s_mb_last_groups), then start will be >= ngroups. Does this allow allocating blocks beyond the 32-bit limit for indirect block mapped files? The commit message mentions that ext4_mb_scan_groups_linear() takes care to not select unsupported groups. However, its loop uses group = *start, and the very first iteration will call ext4_mb_scan_group() with this unsupported group because next_linear_group() is only called at the end of the iteration. After reviewing the code paths involved and considering the LLM review, I determined that this can happen when there is a file system where some files/directories are extent-mapped and others are indirect-block mapped. To address this, add a safety clamp in ext4_mb_scan_groups().
CVE-2026-43066 Média · 5.5 CWE-401 05/05/2026
ext4: fix iloc.bh leak in ext4_fc_replay_inode() error paths
In the Linux kernel, the following vulnerability has been resolved: ext4: fix iloc.bh leak in ext4_fc_replay_inode() error paths During code review, Joseph found that ext4_fc_replay_inode() calls ext4_get_fc_inode_loc() to get the inode location, which holds a reference to iloc.bh that must be released via brelse(). However, several error paths jump to the 'out' label without releasing iloc.bh: - ext4_handle_dirty_metadata() failure - sync_dirty_buffer() failure - ext4_mark_inode_used() failure - ext4_iget() failure Fix this by introducing an 'out_brelse' label placed just before the existing 'out' label to ensure iloc.bh is always released. Additionally, make ext4_fc_replay_inode() propagate errors properly instead of always returning 0.
CVE-2026-43065 Média · 5.5 05/05/2026
ext4: always drain queued discard work in ext4_mb_release()
In the Linux kernel, the following vulnerability has been resolved: ext4: always drain queued discard work in ext4_mb_release() While reviewing recent ext4 patch[1], Sashiko raised the following concern[2]: > If the filesystem is initially mounted with the discard option, > deleting files will populate sbi->s_discard_list and queue > s_discard_work. If it is then remounted with nodiscard, the > EXT4_MOUNT_DISCARD flag is cleared, but the pending s_discard_work is > neither cancelled nor flushed. [1] https://lore.kernel.org/r/20260319094545.19291-1-qiang.zhang@linux.dev/ [2] https://sashiko.dev/#/patchset/20260319094545.19291-1-qiang.zhang%40linux.dev The concern was valid, but it had nothing to do with the patch[1]. One of the problems with Sashiko in its current (early) form is that it will detect pre-existing issues and report it as a problem with the patch that it is reviewing. In practice, it would be hard to hit deliberately (unless you are a malicious syzkaller fuzzer), since it would involve mounting the file system with -o discard, and then deleting a large number of files, remounting the file system with -o nodiscard, and then immediately unmounting the file system before the queued discard work has a change to drain on its own. Fix it because it's a real bug, and to avoid Sashiko from raising this concern when analyzing future patches to mballoc.c.
CVE-2026-43064 Média · 5.5 05/05/2026
dmaengine: idxd: Fix not releasing workqueue on .release()
In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix not releasing workqueue on .release() The workqueue associated with an DSA/IAA device is not released when the object is freed.
CVE-2026-43063 Alta · 7.8 CWE-416 05/05/2026
xfs: don't irele after failing to iget in xfs_attri_recover_work
In the Linux kernel, the following vulnerability has been resolved: xfs: don't irele after failing to iget in xfs_attri_recover_work xlog_recovery_iget* never set @ip to a valid pointer if they return an error, so this irele will walk off a dangling pointer. Fix that.
CVE-2026-43062 Alta · 7.1 CWE-843 05/05/2026
Bluetooth: L2CAP: Fix type confusion in l2cap_ecred_reconf_rsp()
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix type confusion in l2cap_ecred_reconf_rsp() l2cap_ecred_reconf_rsp() casts the incoming data to struct l2cap_ecred_conn_rsp (the ECRED *connection* response, 8 bytes with result at offset 6) instead of struct l2cap_ecred_reconf_rsp (2 bytes with result at offset 0). This causes two problems: - The sizeof(*rsp) length check requires 8 bytes instead of the correct 2, so valid L2CAP_ECRED_RECONF_RSP packets are rejected with -EPROTO. - rsp->result reads from offset 6 instead of offset 0, returning wrong data when the packet is large enough to pass the check. Fix by using the correct type. Also pass the already byte-swapped result variable to BT_DBG instead of the raw __le16 field.
CVE-2026-43061 Média · 5.5 CWE-667 05/05/2026
serial: 8250: Fix TX deadlock when using DMA
In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Fix TX deadlock when using DMA `dmaengine_terminate_async` does not guarantee that the `__dma_tx_complete` callback will run. The callback is currently the only place where `dma->tx_running` gets cleared. If the transaction is canceled and the callback never runs, then `dma->tx_running` will never get cleared and we will never schedule new TX DMA transactions again. This change makes it so we clear `dma->tx_running` after we terminate the DMA transaction. This is "safe" because `serial8250_tx_dma_flush` is holding the UART port lock. The first thing the callback does is also grab the UART port lock, so access to `dma->tx_running` is serialized.
CVE-2026-43060 Alta · 7.8 CWE-416 05/05/2026
netfilter: nft_ct: drop pending enqueued packets on removal
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: drop pending enqueued packets on removal Packets sitting in nfqueue might hold a reference to: - templates that specify the conntrack zone, because a percpu area is used and module removal is possible. - conntrack timeout policies and helper, where object removal leave a stale reference. Since these objects can just go away, drop enqueued packets to avoid stale reference to them. If there is a need for finer grain removal, this logic can be revisited to make selective packet drop upon dependencies.
CVE-2026-43059 Alta · 7.8 CWE-416 05/05/2026
Bluetooth: MGMT: Fix list corruption and UAF in command complete handlers
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix list corruption and UAF in command complete handlers Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") introduced mgmt_pending_valid(), which not only validates the pending command but also unlinks it from the pending list if it is valid. This change in semantics requires updates to several completion handlers to avoid list corruption and memory safety issues. This patch addresses two left-over issues from the aforementioned rework: 1. In mgmt_add_adv_patterns_monitor_complete(), mgmt_pending_remove() is replaced with mgmt_pending_free() in the success path. Since mgmt_pending_valid() already unlinks the command at the beginning of the function, calling mgmt_pending_remove() leads to a double list_del() and subsequent list corruption/kernel panic. 2. In set_mesh_complete(), the use of mgmt_pending_foreach() in the error path is removed. Since the current command is already unlinked by mgmt_pending_valid(), this foreach loop would incorrectly target other pending mesh commands, potentially freeing them while they are still being processed concurrently (leading to UAFs). The redundant mgmt_cmd_status() is also simplified to use cmd->opcode directly.
CVE-2026-43058 Média · 5.5 CWE-476 02/05/2026
media: vidtv: fix pass-by-value structs causing MSAN warnings
In the Linux kernel, the following vulnerability has been resolved: media: vidtv: fix pass-by-value structs causing MSAN warnings vidtv_ts_null_write_into() and vidtv_ts_pcr_write_into() take their argument structs by value, causing MSAN to report uninit-value warnings. While only vidtv_ts_null_write_into() has triggered a report so far, both functions share the same issue. Fix by passing both structs by const pointer instead, avoiding the stack copy of the struct along with its MSAN shadow and origin metadata. The functions do not modify the structs, which is enforced by the const qualifier.
CVE-2026-43057 Alta · 7.5 01/05/2026
net: correctly handle tunneled traffic on IPV6_CSUM GSO fallback
In the Linux kernel, the following vulnerability has been resolved: net: correctly handle tunneled traffic on IPV6_CSUM GSO fallback NETIF_F_IPV6_CSUM only advertises support for checksum offload of packets without IPv6 extension headers. Packets with extension headers must fall back onto software checksumming. Since TSO depends on checksum offload, those must revert to GSO. The below commit introduces that fallback. It always checks network header length. For tunneled packets, the inner header length must be checked instead. Extend the check accordingly. A special case is tunneled packets without inner IP protocol. Such as RFC 6951 SCTP in UDP. Those are not standard IPv6 followed by transport header either, so also must revert to the software GSO path.
CVE-2026-43056 Alta · 7.8 CWE-416 01/05/2026
net: mana: fix use-after-free in add_adev() error path
In the Linux kernel, the following vulnerability has been resolved: net: mana: fix use-after-free in add_adev() error path If auxiliary_device_add() fails, add_adev() jumps to add_fail and calls auxiliary_device_uninit(adev). The auxiliary device has its release callback set to adev_release(), which frees the containing struct mana_adev. Since adev is embedded in struct mana_adev, the subsequent fall-through to init_fail and access to adev->id may result in a use-after-free. Fix this by saving the allocated auxiliary device id in a local variable before calling auxiliary_device_add(), and use that saved id in the cleanup path after auxiliary_device_uninit().
CVE-2026-43055 Alta · 7.5 CWE-457 01/05/2026
scsi: target: file: Use kzalloc_flex for aio_cmd
In the Linux kernel, the following vulnerability has been resolved: scsi: target: file: Use kzalloc_flex for aio_cmd The target_core_file doesn't initialize the aio_cmd->iocb for the ki_write_stream. When a write command fd_execute_rw_aio() is executed, we may get a bogus ki_write_stream value, causing unintended write failure status when checking iocb->ki_write_stream > max_write_streams in the block device. Let's just use kzalloc_flex when allocating the aio_cmd and let ki_write_stream=0 to fix this issue.
CVE-2026-43054 Média · 5.5 CWE-772 01/05/2026
scsi: target: tcm_loop: Drain commands in target_reset handler
In the Linux kernel, the following vulnerability has been resolved: scsi: target: tcm_loop: Drain commands in target_reset handler tcm_loop_target_reset() violates the SCSI EH contract: it returns SUCCESS without draining any in-flight commands. The SCSI EH documentation (scsi_eh.rst) requires that when a reset handler returns SUCCESS the driver has made lower layers "forget about timed out scmds" and is ready for new commands. Every other SCSI LLD (virtio_scsi, mpt3sas, ipr, scsi_debug, mpi3mr) enforces this by draining or completing outstanding commands before returning SUCCESS. Because tcm_loop_target_reset() doesn't drain, the SCSI EH reuses in-flight scsi_cmnd structures for recovery commands (e.g. TUR) while the target core still has async completion work queued for the old se_cmd. The memset in queuecommand zeroes se_lun and lun_ref_active, causing transport_lun_remove_cmd() to skip its percpu_ref_put(). The leaked LUN reference prevents transport_clear_lun_ref() from completing, hanging configfs LUN unlink forever in D-state: INFO: task rm:264 blocked for more than 122 seconds. rm D 0 264 258 0x00004000 Call Trace: __schedule+0x3d0/0x8e0 schedule+0x36/0xf0 transport_clear_lun_ref+0x78/0x90 [target_core_mod] core_tpg_remove_lun+0x28/0xb0 [target_core_mod] target_fabric_port_unlink+0x50/0x60 [target_core_mod] configfs_unlink+0x156/0x1f0 [configfs] vfs_unlink+0x109/0x290 do_unlinkat+0x1d5/0x2d0 Fix this by making tcm_loop_target_reset() actually drain commands: 1. Issue TMR_LUN_RESET via tcm_loop_issue_tmr() to drain all commands that the target core knows about (those not yet CMD_T_COMPLETE). 2. Use blk_mq_tagset_busy_iter() to iterate all started requests and flush_work() on each se_cmd — this drains any deferred completion work for commands that already had CMD_T_COMPLETE set before the TMR (which the TMR skips via __target_check_io_state()). This is the same pattern used by mpi3mr, scsi_debug, and libsas to drain outstanding commands during reset.
CVE-2026-43053 Média · 4.7 CWE-367 01/05/2026
xfs: close crash window in attr dabtree inactivation
In the Linux kernel, the following vulnerability has been resolved: xfs: close crash window in attr dabtree inactivation When inactivating an inode with node-format extended attributes, xfs_attr3_node_inactive() invalidates all child leaf/node blocks via xfs_trans_binval(), but intentionally does not remove the corresponding entries from their parent node blocks. The implicit assumption is that xfs_attr_inactive() will truncate the entire attr fork to zero extents afterwards, so log recovery will never reach the root node and follow those stale pointers. However, if a log shutdown occurs after the leaf/node block cancellations commit but before the attr bmap truncation commits, this assumption breaks. Recovery replays the attr bmap intact (the inode still has attr fork extents), but suppresses replay of all cancelled leaf/node blocks, maybe leaving them as stale data on disk. On the next mount, xlog_recover_process_iunlinks() retries inactivation and attempts to read the root node via the attr bmap. If the root node was not replayed, reading the unreplayed root block triggers a metadata verification failure immediately; if it was replayed, following its child pointers to unreplayed child blocks triggers the same failure: XFS (pmem0): Metadata corruption detected at xfs_da3_node_read_verify+0x53/0x220, xfs_da3_node block 0x78 XFS (pmem0): Unmount and run xfs_repair XFS (pmem0): First 128 bytes of corrupted metadata buffer: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ XFS (pmem0): metadata I/O error in "xfs_da_read_buf+0x104/0x190" at daddr 0x78 len 8 error 117 Fix this in two places: In xfs_attr3_node_inactive(), after calling xfs_trans_binval() on a child block, immediately remove the entry that references it from the parent node in the same transaction. This eliminates the window where the parent holds a pointer to a cancelled block. Once all children are removed, the now-empty root node is converted to a leaf block within the same transaction. This node-to-leaf conversion is necessary for crash safety. If the system shutdown after the empty node is written to the log but before the second-phase bmap truncation commits, log recovery will attempt to verify the root block on disk. xfs_da3_node_verify() does not permit a node block with count == 0; such a block will fail verification and trigger a metadata corruption shutdown. on the other hand, leaf blocks are allowed to have this transient state. In xfs_attr_inactive(), split the attr fork truncation into two explicit phases. First, truncate all extents beyond the root block (the child extents whose parent references have already been removed above). Second, invalidate the root block and truncate the attr bmap to zero in a single transaction. The two operations in the second phase must be atomic: as long as the attr bmap has any non-zero length, recovery can follow it to the root block, so the root block invalidation must commit together with the bmap-to-zero truncation.
CVE-2026-43052 Alta · 7.1 01/05/2026
wifi: mac80211: check tdls flag in ieee80211_tdls_oper
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check tdls flag in ieee80211_tdls_oper When NL80211_TDLS_ENABLE_LINK is called, the code only checks if the station exists but not whether it is actually a TDLS station. This allows the operation to proceed for non-TDLS stations, causing unintended side effects like modifying channel context and HT protection before failing. Add a check for sta->sta.tdls early in the ENABLE_LINK case, before any side effects occur, to ensure the operation is only allowed for actual TDLS peers.
CVE-2026-43051 Alta · 8.1 CWE-125 01/05/2026
HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq
In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq The wacom_intuos_bt_irq() function processes Bluetooth HID reports without sufficient bounds checking. A maliciously crafted short report can trigger an out-of-bounds read when copying data into the wacom structure. Specifically, report 0x03 requires at least 22 bytes to safely read the processed data and battery status, while report 0x04 (which falls through to 0x03) requires 32 bytes. Add explicit length checks for these report IDs and log a warning if a short report is received.
CVE-2026-43050 Alta · 7.0 CWE-416 01/05/2026
atm: lec: fix use-after-free in sock_def_readable()
In the Linux kernel, the following vulnerability has been resolved: atm: lec: fix use-after-free in sock_def_readable() A race condition exists between lec_atm_close() setting priv->lecd to NULL and concurrent access to priv->lecd in send_to_lecd(), lec_handle_bridge(), and lec_atm_send(). When the socket is freed via RCU while another thread is still using it, a use-after-free occurs in sock_def_readable() when accessing the socket's wait queue. The root cause is that lec_atm_close() clears priv->lecd without any synchronization, while callers dereference priv->lecd without any protection against concurrent teardown. Fix this by converting priv->lecd to an RCU-protected pointer: - Mark priv->lecd as __rcu in lec.h - Use rcu_assign_pointer() in lec_atm_close() and lecd_attach() for safe pointer assignment - Use rcu_access_pointer() for NULL checks that do not dereference the pointer in lec_start_xmit(), lec_push(), send_to_lecd() and lecd_attach() - Use rcu_read_lock/rcu_dereference/rcu_read_unlock in send_to_lecd(), lec_handle_bridge() and lec_atm_send() to safely access lecd - Use rcu_assign_pointer() followed by synchronize_rcu() in lec_atm_close() to ensure all readers have completed before proceeding. This is safe since lec_atm_close() is called from vcc_release() which holds lock_sock(), a sleeping lock. - Remove the manual sk_receive_queue drain from lec_atm_close() since vcc_destroy_socket() already drains it after lec_atm_close() returns. v2: Switch from spinlock + sock_hold/put approach to RCU to properly fix the race. The v1 spinlock approach had two issues pointed out by Eric Dumazet: 1. priv->lecd was still accessed directly after releasing the lock instead of using a local copy. 2. The spinlock did not prevent packets being queued after lec_atm_close() drains sk_receive_queue since timer and workqueue paths bypass netif_stop_queue(). Note: Syzbot patch testing was attempted but the test VM terminated unexpectedly with "Connection to localhost closed by remote host", likely due to a QEMU AHCI emulation issue unrelated to this fix. Compile testing with "make W=1 net/atm/lec.o" passes cleanly.
CVE-2026-43049 Alta · 7.8 CWE-416 01/05/2026
HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failure
In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failure Presently, if the force feedback initialisation fails when probing the Logitech G920 Driving Force Racing Wheel for Xbox One, an error number will be returned and propagated before the userspace infrastructure (sysfs and /dev/input) has been torn down. If userspace ignores the errors and continues to use its references to these dangling entities, a UAF will promptly follow. We have 2 options; continue to return the error, but ensure that all of the infrastructure is torn down accordingly or continue to treat this condition as a warning by emitting the message but returning success. It is thought that the original author's intention was to emit the warning but keep the device functional, less the force feedback feature, so let's go with that.
CVE-2026-43048 Alta · 8.8 CWE-125 01/05/2026
HID: core: Mitigate potential OOB by removing bogus memset()
In the Linux kernel, the following vulnerability has been resolved: HID: core: Mitigate potential OOB by removing bogus memset() The memset() in hid_report_raw_event() has the good intention of clearing out bogus data by zeroing the area from the end of the incoming data string to the assumed end of the buffer. However, as we have previously seen, doing so can easily result in OOB reads and writes in the subsequent thread of execution. The current suggestion from one of the HID maintainers is to remove the memset() and simply return if the incoming event buffer size is not large enough to fill the associated report. Suggested-by Benjamin Tissoires <bentiss@kernel.org> [bentiss: changed the return value]
CVE-2026-43047 Alta · 7.8 CWE-787 01/05/2026
HID: multitouch: Check to ensure report responses match the request
In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: Check to ensure report responses match the request It is possible for a malicious (or clumsy) device to respond to a specific report's feature request using a completely different report ID. This can cause confusion in the HID core resulting in nasty side-effects such as OOB writes. Add a check to ensure that the report ID in the response, matches the one that was requested. If it doesn't, omit reporting the raw event and return early.
CVE-2026-43046 Média · 5.5 CWE-617 01/05/2026
btrfs: reject root items with drop_progress and zero drop_level
In the Linux kernel, the following vulnerability has been resolved: btrfs: reject root items with drop_progress and zero drop_level [BUG] When recovering relocation at mount time, merge_reloc_root() and btrfs_drop_snapshot() both use BUG_ON(level == 0) to guard against an impossible state: a non-zero drop_progress combined with a zero drop_level in a root_item, which can be triggered: ------------[ cut here ]------------ kernel BUG at fs/btrfs/relocation.c:1545! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 283 ... Tainted: 6.18.0+ #16 PREEMPT(voluntary) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Ubuntu 24.04 PC v2, BIOS 1.16.3-debian-1.16.3-2 RIP: 0010:merge_reloc_root+0x1266/0x1650 fs/btrfs/relocation.c:1545 Code: ffff0000 00004589 d7e9acfa ffffe8a1 79bafebe 02000000 Call Trace: merge_reloc_roots+0x295/0x890 fs/btrfs/relocation.c:1861 btrfs_recover_relocation+0xd6e/0x11d0 fs/btrfs/relocation.c:4195 btrfs_start_pre_rw_mount+0xa4d/0x1810 fs/btrfs/disk-io.c:3130 open_ctree+0x5824/0x5fe0 fs/btrfs/disk-io.c:3640 btrfs_fill_super fs/btrfs/super.c:987 [inline] btrfs_get_tree_super fs/btrfs/super.c:1951 [inline] btrfs_get_tree_subvol fs/btrfs/super.c:2094 [inline] btrfs_get_tree+0x111c/0x2190 fs/btrfs/super.c:2128 vfs_get_tree+0x9a/0x370 fs/super.c:1758 fc_mount fs/namespace.c:1199 [inline] do_new_mount_fc fs/namespace.c:3642 [inline] do_new_mount fs/namespace.c:3718 [inline] path_mount+0x5b8/0x1ea0 fs/namespace.c:4028 do_mount fs/namespace.c:4041 [inline] __do_sys_mount fs/namespace.c:4229 [inline] __se_sys_mount fs/namespace.c:4206 [inline] __x64_sys_mount+0x282/0x320 fs/namespace.c:4206 ... RIP: 0033:0x7f969c9a8fde Code: 0f1f4000 48c7c2b0 fffffff7 d8648902 b8ffffff ffc3660f ---[ end trace 0000000000000000 ]--- The bug is reproducible on 7.0.0-rc2-next-20260310 with our dynamic metadata fuzzing tool that corrupts btrfs metadata at runtime. [CAUSE] A non-zero drop_progress.objectid means an interrupted btrfs_drop_snapshot() left a resume point on disk, and in that case drop_level must be greater than 0 because the checkpoint is only saved at internal node levels. Although this invariant is enforced when the kernel writes the root item, it is not validated when the root item is read back from disk. That allows on-disk corruption to provide an invalid state with drop_progress.objectid != 0 and drop_level == 0. When relocation recovery later processes such a root item, merge_reloc_root() reads drop_level and hits BUG_ON(level == 0). The same invalid metadata can also trigger the corresponding BUG_ON() in btrfs_drop_snapshot(). [FIX] Fix this by validating the root_item invariant in tree-checker when reading root items from disk: if drop_progress.objectid is non-zero, drop_level must also be non-zero. Reject such malformed metadata with -EUCLEAN before it reaches merge_reloc_root() or btrfs_drop_snapshot() and triggers the BUG_ON. After the fix, the same corruption is correctly rejected by tree-checker and the BUG_ON is no longer triggered.
CVE-2026-43045 Média · 5.5 01/05/2026
mshv: Fix error handling in mshv_region_pin
In the Linux kernel, the following vulnerability has been resolved: mshv: Fix error handling in mshv_region_pin The current error handling has two issues: First, pin_user_pages_fast() can return a short pin count (less than requested but greater than zero) when it cannot pin all requested pages. This is treated as success, leading to partially pinned regions being used, which causes memory corruption. Second, when an error occurs mid-loop, already pinned pages from the current batch are not properly accounted for before calling mshv_region_invalidate_pages(), causing a page reference leak. Treat short pins as errors and fix partial batch accounting before cleanup.
CVE-2026-43044 Alta · 7.8 01/05/2026
crypto: caam - fix DMA corruption on long hmac keys
In the Linux kernel, the following vulnerability has been resolved: crypto: caam - fix DMA corruption on long hmac keys When a key longer than block size is supplied, it is copied and then hashed into the real key. The memory allocated for the copy needs to be rounded to DMA cache alignment, as otherwise the hashed key may corrupt neighbouring memory. The rounding was performed, but never actually used for the allocation. Fix this by replacing kmemdup with kmalloc for a larger buffer, followed by memcpy.