CVE Intelligence

Vulnerabilidades do Linux Linux

🔔 Criar alerta RSS Verificador de versão

CVEs publicadas que afetam Linux Linux: 10803 registro(s), com versões afetadas e correções.

CVE-2026-80935 Alta · 8.8 11/09/2026
wifi: mt76: mt7996: bound the device EEPROM address before the EFUSE copy
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: bound the device EEPROM address before the EFUSE copy mt7996_mcu_get_eeprom() derives the destination of the EFUSE/EXT block copy from the address reported by the MCU response (event->addr, a device-controlled __le32) and clamps only the copy length, never the destination offset into dev->mt76.eeprom.data. A malicious or malfunctioning device can report an arbitrary address and drive an out-of-bounds write of up to MT7996_EXT_EEPROM_BLOCK_SIZE bytes past eeprom.data. Reject a response whose address would place the copy outside eeprom.data before deriving the destination pointer. Devices that echo the requested in-bounds offset are unaffected.
CVE-2026-80934 Desconhecida 11/09/2026
wifi: mt76: mt7996: fix TX DMA mapping leak for AddBA req frames
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix TX DMA mapping leak for AddBA req frames mt7996/mt7992 hand the firmware a HW MAC-TXP for AddBA req action frames (MT_TXD7_MAC_TXD, set in mt7996_mac_write_txwi_80211()), but are otherwise FW-TXP devices. On tx free mt76_connac_txp_skb_unmap() therefore decodes the per-frame txp as a struct mt76_connac_fw_txp. For a MAC-TXP the fw_txp.nbuf byte aliases the AddBA TID word (MT_TXP1_TID_ADDBA), which is always zero, so the unmap loop runs zero times and the skb DMA mapping in buf[1] is never unmapped. buf[1].skip_unmap is set unconditionally, so the generic DMA-ring cleanup skips it as well. Each AddBA req therefore leaks one TX DMA mapping, roughly one per (re)association. With WED enabled these mappings are bounced through the WED swiotlb pool, so under continuous client reconnect churn the pool is exhausted after ~1-2 days, after which DMA mapping fails for WED, the WiFi MCU and other on-SoC consumers. Keep the deferred (token release) unmap that the design relies on, and add an mt7996-specific txp unmap that inspects MT_TXD7_MAC_TXD and unmaps buf[1] from the MAC-TXP layout for those frames, delegating to mt76_connac_txp_skb_unmap() otherwise.
CVE-2026-80933 Alta · 7.8 11/09/2026
wifi: mt76: mt7996: validate default EEPROM firmware size
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: validate default EEPROM firmware size The default EEPROM firmware is parsed and copied as a full EEPROM without checking its length. A truncated file can make the driver read beyond the firmware buffer during variant validation or the fallback copy. Reject files shorter than MT7996_EEPROM_SIZE before parsing or copying the firmware.
CVE-2026-80932 Alta · 8.4 11/09/2026
vsock/virtio: flush works in dependency order
In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: flush works in dependency order virtio_vsock_remove() stops the virtqueues and then flushes each work item before freeing the enclosing virtio_vsock. The current order does not account for dependencies between those items: tx_work may queue send_pkt_work, and send_pkt_work may queue rx_work. In particular, send_pkt_work can set restart_rx and release tx_lock. The remove path can then stop the queues and flush rx_work before send_pkt_work queues it. Although the later send_pkt_work flush waits for that producer to finish, nothing waits for the newly queued rx_work, so kfree(vsock) can race with it. KASAN reported: BUG: KASAN: slab-use-after-free in virtio_transport_rx_work+0x487/0x4b0 Read of size 8 at addr ffff888114c2b008 by task kworker/1:1/47 Workqueue: virtio_vsock virtio_transport_rx_work Call Trace: virtio_transport_rx_work+0x487/0x4b0 process_one_work+0x688/0x1120 worker_thread+0x45b/0xd10 Allocated by task 1: virtio_vsock_probe+0xef/0x6b0 Freed by task 84: kfree+0x131/0x3c0 virtio_vsock_remove+0xd1/0x100 Flush the works in producer-to-consumer order. virtio_vsock_vqs_del() has already disabled the queue callbacks and cleared the run flags, so after tx_work and send_pkt_work are drained, no source remains that can queue rx_work after its flush.
CVE-2026-80931 Alta · 7.8 11/09/2026
w1: ds28e17: reject an oversize length on an I2C block read
In the Linux kernel, the following vulnerability has been resolved: w1: ds28e17: reject an oversize length on an I2C block read w1_f19_i2c_master_transfer() is the master_xfer for the DS28E17 1-Wire to I2C bridge. On an I2C_M_RECV_LEN read, it takes the length from the device. The downstream slave puts a length byte in buf[0]. The driver then reads that many bytes into buf[1] with w1_f19_i2c_read(). buf[0] is controlled by the device and can be 0 to 255. w1_f19_i2c_read() only rejects a zero count. The caller buffer is I2C_SMBUS_BLOCK_MAX + 2, so 34 bytes. A length above 32 makes the read run past it, up to about 222 bytes out of bounds. The SMBus core does check buf[0] against I2C_SMBUS_BLOCK_MAX. That check runs after master_xfer returns. By then the write is already done. i2c-algo-bit rejects an oversize length before it copies, and returns -EPROTO. Reject a length above I2C_SMBUS_BLOCK_MAX at both RECV_LEN sites, the same way i2c-algo-bit does.
CVE-2026-80930 Desconhecida 11/09/2026
tpm: tpm_i2c_nuvoton: disable IRQ on wait timeout
In the Linux kernel, the following vulnerability has been resolved: tpm: tpm_i2c_nuvoton: disable IRQ on wait timeout i2c_nuvoton_wait_for_stat() enables the IRQ before waiting for the interrupt handler to report a status change. If the wait times out, or is interrupted before the handler runs, the function returns without balancing the enable_irq() call. Disable the IRQ before leaving the failed wait path. Also preserve an interrupted wait's original error code instead of converting it to -ETIMEDOUT inside the helper.
CVE-2026-80929 Alta · 7.8 11/09/2026
sysctl: move the "cad_pid" entry from pid_table[] to kern_reboot_table[]
In the Linux kernel, the following vulnerability has been resolved: sysctl: move the "cad_pid" entry from pid_table[] to kern_reboot_table[] cad_pid is global, and kill_cad_pid() is only used in the root namespace. However, due to pid_table_root_permissions(), a non-root user can unshare pid/user namespaces and modify it from the child namespace. This makes no sense and is simply wrong. Move it to kern_reboot_table[] where it logically belongs; this ensures that only GLOBAL_ROOT_UID can read/modify this sysctl. Note that this patch doesn't preserve "#ifdef CONFIG_PROC_SYSCTL" around the "cad_pid"; CONFIG_PROC_SYSCTL selects CONFIG_SYSCTL, so it is always set when kern_reboot_table[] is compiled.
CVE-2026-80928 Alta · 7.8 11/09/2026
smack: fix cred UAF in smack_file_send_sigiotask()
In the Linux kernel, the following vulnerability has been resolved: smack: fix cred UAF in smack_file_send_sigiotask() When inspecting the credentials of another task, objective credentials (->real_cred, accessed with __task_cred()) must always be used. Accessing ->cred on a non-current task is forbidden unless that task is being created or destroyed; a task is allowed to change its own ->cred pointer with no synchronization, and changing ->cred should only affect the current syscall. smack_file_send_sigiotask() was accessing both sets of credentials: First tsk->cred, then __task_cred(tsk). Fix it, always access the objective credentials here. I have tested that this bug can lead to a KASAN-reported UAF of struct cred in smack_file_send_sigiotask(), and that this fix prevents the race.
CVE-2026-80927 Desconhecida 11/09/2026
timekeeping: Check the return value of tk_get_aux_ts64 in __do_adjtimex()
In the Linux kernel, the following vulnerability has been resolved: timekeeping: Check the return value of tk_get_aux_ts64 in __do_adjtimex() If the auxiliary clock is disabled during tk_get_aux_ts64() but is enabled before tks->clock_valid is checked, then uninitialized stackdata will be used in the calculations and indirectly leaked to userspace. The same race window also exists after this change and also for the core timekeeper. But in these cases the only effect would be incorrect adjustments and this is userspace's responsibility to avoid this.
CVE-2026-80926 Crítica · 9.8 11/09/2026
ksmbd: fix use-after-free in oplock break notification
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in oplock break notification smb2_oplock_break_noti() reads opinfo->conn without any lock and dereferences it after two allocations which may sleep. When the durable handle owning the oplock is disconnected, session_fd_check() clears opinfo->conn and drops its conn reference under ci->m_lock, and the last ksmbd_conn_put() frees the connection. A break triggered by another connection that races with the teardown can then resurrect the freed connection: ksmbd_conn_get() is a plain atomic_inc, and the queued break work later dereferences the stale conn via ksmbd_conn_write(), a use-after-free reachable by any authenticated client holding a durable batch oplock. Thread the caller's inode into the notification path instead of taking a new reference on it. Every caller of oplock_break() already holds a live ksmbd_file (or an explicit ksmbd_inode_lookup_lock() reference, in the parent lease break paths) on the inode that owns the break target's oplock list, so ci cannot be freed during the call, and its lock can be taken without dereferencing opinfo->o_fp, which a concurrent close may free. Select and pin the connection under ci->m_lock, the same lock session_fd_check() and ksmbd_reopen_durable_fd() use to update opinfo->conn, so a concurrent detach either loses the race to the clear or keeps the connection alive until the notification work releases it. Transfer the reference to the work item and release it on allocation failures.
CVE-2026-80925 Desconhecida 09/09/2026
vlan: fix skb_under_panic and races when toggling HW VLAN offload
In the Linux kernel, the following vulnerability has been resolved: vlan: fix skb_under_panic and races when toggling HW VLAN offload Toggling hardware VLAN TX offload (NETIF_F_HW_VLAN_CTAG_TX or NETIF_F_HW_VLAN_STAG_TX) on a lower device invokes vlan_transfer_features(), which dynamically changed vlandev->hard_header_len. This causes two issues: 1. Lockless TX paths (e.g. packet_snd in af_packet.c, ip6_finish_output2) read dev->hard_header_len without holding RTNL lock. Mutating hard_header_len dynamically under RTNL creates a data race where upper layers reserve insufficient headroom based on a stale hard_header_len, resulting in skb_under_panic when vlan_dev_hard_header() is called. 2. In addition, vlan_transfer_features() updated hard_header_len without updating header_ops, causing a mismatch between allocated headroom and header creation. Always setting dev->hard_header_len = real_dev->hard_header_len and dev->needed_headroom = real_dev->needed_headroom + VLAN_HLEN unconditionally ensures: - dev->hard_header_len remains 100% static and immutable at real_dev->hard_header_len, eliminating all dynamic runtime updates and data races on hard_header_len. - Upper layers allocating skbs via LL_RESERVED_SPACE() will always reserve sufficient headroom for software VLAN tag insertion (real_dev->hard_header_len + real_dev->needed_headroom + VLAN_HLEN). - vlandev inherits real_dev->needed_tailroom so underlying trailer/padding/ICV requirements are honored. - AF_PACKET SOCK_RAW network header offsets remain correctly aligned at real_dev->hard_header_len. - vlan_header_ops is used unconditionally. Note to stable teams: Make sure to backport these commits: e16e960d55a4 ("ipvlan: inherit needed_headroom and needed_tailroom from phy_dev") cef51860becd ("macvlan: inherit needed_headroom and needed_tailroom from lowerdev")
CVE-2026-80924 Alta · 7.5 09/09/2026
crypto: krb5 - use kfree_sensitive() for derived key buffers
In the Linux kernel, the following vulnerability has been resolved: crypto: krb5 - use kfree_sensitive() for derived key buffers crypto_krb5_prepare_encryption() and crypto_krb5_prepare_checksum() free the buffer holding the freshly derived keys with plain kfree(), leaving the key material behind in the freed slab object.
CVE-2026-80923 Desconhecida 09/09/2026
xhci: dbgtty: Fix unregister on tty_register_driver() failure
In the Linux kernel, the following vulnerability has been resolved: xhci: dbgtty: Fix unregister on tty_register_driver() failure If tty_register_driver() fails, it drops the reference, but fails to set the global dbc_tty_driver to NULL, causing the unregister to be called again when module exits. On module unload dbc_tty_exit() only gates its cleanup on the driver pointer being non-NULL, so it operates on the already-freed driver: module_init(xhci_hcd_init) xhci_hcd_init() xhci_dbc_init() [return value ignored] dbc_tty_init() tty_register_driver() fails tty_driver_kref_put() -> driver freed (dbc_tty_driver left dangling) ... module_exit(xhci_hcd_fini) xhci_hcd_fini() xhci_dbc_exit() dbc_tty_exit() if (dbc_tty_driver) -> true (dangling) tty_unregister_driver() -> use-after-free
CVE-2026-80922 Desconhecida 09/09/2026
crypto: qcom-rng - Allow zero as a random number
In the Linux kernel, the following vulnerability has been resolved: crypto: qcom-rng - Allow zero as a random number Zero is a valid random number and needs to be allowed. Otherwise the output is distinguishable from random.
CVE-2026-80921 Alta · 8.8 09/09/2026
KVM: s390: vsie: zero stale crypto bits
In the Linux kernel, the following vulnerability has been resolved: KVM: s390: vsie: zero stale crypto bits When shadowing crypto access bits from a format0 apcb (crycb 0 or 1), the bits 64..255 are unchanged from whatever is in the vsie page in the crycb and thus in the apcb. This gives a nested guest potential access to a device no longer available. Zero out the remaining bits.
CVE-2026-80920 Desconhecida 09/09/2026
io_uring: defer eventfd signaling when queued from a wakeup handler
In the Linux kernel, the following vulnerability has been resolved: io_uring: defer eventfd signaling when queued from a wakeup handler io_req_local_work_add() signals the CQ ring eventfd inline when it is the one to push the first entry onto ->work_list. For DEFER_TASKRUN rings that add is frequently done from a waitqueue wakeup handler, where an arbitrary waitqueue lock is held. eventfd_signal_mask() only refuses to recurse when current->in_eventfd is set, but that bit is set by eventfd_signal_mask() itself. If the wake chain starts somewhere else, signal goes out inline and can feed back into epoll. Add IOU_F_TWQ_IN_WAKE, set it on the task_work add done from the three waitqueue callbacks, and use it to force io_eventfd_signal() down the existing call_rcu_hurry() deferral instead of signaling inline.
CVE-2026-80919 Desconhecida 09/09/2026
drm/amdgpu: fix recursive ww_mutex acquire in amdgpu_devcoredump_format
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix recursive ww_mutex acquire in amdgpu_devcoredump_format When dumping IB contents from a hung job, amdgpu_devcoredump_format() acquired the VM root PD's reservation via amdgpu_vm_lock_by_pasid() and then, for each IB, called amdgpu_bo_reserve() on the BO backing the IB. Both reservations are reservation_ww_class_mutex objects and neither used a ww_acquire_ctx, which trips lockdep: WARNING: possible recursive locking detected -------------------------------------------- kworker/u128:0 is trying to acquire lock: ffff88838b16e1f0 (reservation_ww_class_mutex){+.+.}-{4:4}, at: amdgpu_devcoredump_format+0x1594/0x23f0 [amdgpu] but task is already holding lock: ffff8882f82681f0 (reservation_ww_class_mutex){+.+.}-{4:4}, at: amdgpu_devcoredump_format+0x1594/0x23f0 [amdgpu] Possible unsafe locking scenario: CPU0 ---- lock(reservation_ww_class_mutex); lock(reservation_ww_class_mutex); *** DEADLOCK *** May be due to missing lock nesting notation Workqueue: events_unbound amdgpu_devcoredump_deferred_work [amdgpu] Call Trace: __ww_mutex_lock.constprop.0 ww_mutex_lock amdgpu_bo_reserve amdgpu_devcoredump_format+0x1594 [amdgpu] amdgpu_devcoredump_deferred_work+0xea [amdgpu] The two reservations are on different BOs in the captured trace, so the splat is a lockdep-correctness warning, not an observed deadlock. It becomes a real self-deadlock whenever the IB BO shares its dma_resv with the root PD (the always-valid case, see amdgpu_vm_is_bo_always_valid()): amdgpu_bo_reserve(abo) re-acquires the same ww_mutex without a ticket and blocks forever. With amdgpu.gpu_recovery=0 the timeout handler refires every ~2 s and each invocation produces this splat, drowning the kernel ring buffer. Now that amdgpu_vm_lock_by_pasid() takes a drm_exec context, move the IB dumping into a separate helper that locks the root PD and every IB BO together in a single drm_exec ticket. DRM_EXEC_IGNORE_DUPLICATES handles IB BOs that share a dma_resv (e.g. always-valid BOs, or two IBs backed by the same BO). Every lock is now a top-level acquire under one ww_acquire_ctx, so the recursive ww_mutex condition is gone, and the per-IB amdgpu_bo_reserve()/amdgpu_bo_unref() dance -- including a BO refcount leak on the amdgpu_bo_reserve() failure path -- is removed. (cherry picked from commit d6bf4242731219ee08ce54c365631e395486651e)
CVE-2026-80918 Desconhecida 09/09/2026
HID: core: fix number/pointer type confusion on long items
In the Linux kernel, the following vulnerability has been resolved: HID: core: fix number/pointer type confusion on long items When fetch_item() is called by hid_scan_report() on an item with HID_ITEM_TAG_LONG, it stores a pointer to the item data in item->data.longdata instead of storing a value directly in item->data.{u8/u16/u32}. When item_udata() or item_sdata() encounters such an item, it incorrectly assumes that the item is in short format, and therefore returns the lower part of a kernel pointer reinterpreted as a number. When a HID device is connected whose descriptor contains a HID_GLOBAL_ITEM_TAG_REPORT_SIZE encoded in long format with size=4, this causes the lower half of a kernel pointer to be printed into dmesg as a number, like this: hid (null): invalid report_size 107953555 To fix it, let item_udata() and item_sdata() verify that the item is in short format. Note that this bug only affects hid_scan_report(), while the main parsing pass hid_parse_collections() will always bail out when encountering a long item. Sidenote: There are currently no users of data.longdata; maybe we should just remove any parsing of long-format descriptors as a follow-up.
CVE-2026-80917 Desconhecida 09/09/2026
PCI: host-generic: Fix NULL pointer dereference on 32-bit CAM systems
In the Linux kernel, the following vulnerability has been resolved: PCI: host-generic: Fix NULL pointer dereference on 32-bit CAM systems On 32-bit systems the config space is too large to ioremap in one go, so pci_ecam_create() maps each bus segment separately and relies on the ->add_bus callback (pci_ecam_add_bus) to populate the per-bus mapping in cfg->winp[]. pci_ecam_map_bus() then uses that mapping as the base for every config access. The generic ECAM ops (pci_generic_ecam_ops) already provide the ->add_bus and ->remove_bus callbacks, but the CAM (legacy) ops in pci-host-generic.c do not. As a result, on a 32-bit host using "pci-host-cam-generic" the per-bus mapping is never set up and the first config read dereferences a NULL base, crashing during bus enumeration: Unable to handle kernel NULL pointer dereference at virtual address 00000800 Oops [#1] CPU: 0 PID: 1 Comm: swapper Not tainted 6.9.7+ #43 Hardware name: Digilent Nexys-Video-A7 RV32 (DT) epc : pci_generic_config_read+0x40/0xb0 ra : pci_generic_config_read+0x2c/0xb0 [<c038db9c>] pci_generic_config_read+0x40/0xb0 [<c038da04>] pci_bus_read_config_dword+0x50/0xb0 [<c0391e94>] pci_bus_generic_read_dev_vendor_id+0x3c/0x1ec [<c039245c>] pci_scan_single_device+0xa4/0x11c [<c0392570>] pci_scan_slot+0x9c/0x23c [<c039388c>] pci_scan_child_bus_extend+0x58/0x2f4 [<c0393db0>] pci_scan_root_bus_bridge+0x64/0xe8 [<c0393e54>] pci_host_probe+0x20/0xc8 [<c03bc6f4>] pci_host_common_probe+0x144/0x1e4 Fix this by giving the CAM ops the same ->add_bus/->remove_bus callbacks. Since pci_ecam_add_bus() and pci_ecam_remove_bus() are static to ecam.c, move the CAM ops definition there as pci_generic_cam_ops (mirroring pci_generic_ecam_ops) and export it for pci-host-generic.c to reference. [mani: removed timestamp from log]
CVE-2026-80916 Desconhecida 09/09/2026
kcov: fix data corruption and race conditions on PREEMPT_RT
In the Linux kernel, the following vulnerability has been resolved: kcov: fix data corruption and race conditions on PREEMPT_RT syzbot is reporting KCOV state corruption on PREEMPT_RT kernels, for the temporary storage used for saving/restoring remote KCOV state is currently allocated as the per-CPU area. On PREEMPT_RT kernels, softirq handlers run as preemptible task threads (e.g., ksoftirqd). If a softirq context preempts a task running a remote KCOV session, it safely saves the task's state into the per-CPU area. However, if that softirq thread is subsequently preempted by a higher- priority softirq thread on the same CPU, the second softirq will overwrite the same per-CPU area, permanently destroying the original task's KCOV state. Fix this data corruption by moving the temporary storage from the per-CPU area to the per-thread area. Since each softirq thread now owns its own task context, nested softirq preemption no longer causes data overwrites. Note that while the temporary storage is now on a per-thread basis, the per-CPU kcov_percpu_data.lock must be retained, for we need to ensure that kcov_remote_start() and kcov_remote_stop() operate atomically without racing against asynchronous interrupts that manipulate the current task's KCOV state. It is likely that GFP_KERNEL allocation by vmalloc_node() in kcov_init() has already called panic() before returning NULL, for there will be no OOM-killable userspace processes when __init function of built-in module runs. But this patch also fixes crashing the kernel when vmalloc_node() in kcov_init() returned NULL, for kcov_init() left per-CPU irq_area == NULL but kcov_remote_start() depends on per-CPU irq_area != NULL, resulting in (1) doing vmalloc() in kcov_remote_start() despite !in_task() context (2) out-of-array-bounds access if (1) succeeded but kcov->remote_size < CONFIG_KCOV_IRQ_AREA_SIZE (3) always leak memory allocated by (1), eventually killing all OOM-killable userspace processes problems.
CVE-2026-80915 Desconhecida 09/09/2026
drm/xe: Fix DPT allocation paths.
In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix DPT allocation paths. Remove the fallback for VRAM to system memory, I tested it and that doesn't work at all, only a black screen with pipe fault errors were observed. On systems with media GT, extra latency is added when accessing stolen memory when the GT is in MC6. Since we additionally aren't counting how much memory is used for stolen and we could in theory fill up the entire stolen area with DPT's, avoid using stolen and only use the default memory region. Using stolen may also result in random system hangs under load. (cherry picked from commit a196406a3831291598fe8e73245914f7acffdfe0)
CVE-2026-80914 Alta · 8.8 09/09/2026
Bluetooth: ISO: fix use-after-free of listener socket in iso_conn_ready
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix use-after-free of listener socket in iso_conn_ready iso_conn_ready() looks up the BIS listener socket with iso_get_sock(), which takes a reference, and then, without re-checking its state, creates a child socket from it: parent = iso_get_sock(hdev, ...); if (!parent) return; lock_sock(parent); sk = iso_sock_alloc(sock_net(parent), NULL, BTPROTO_ISO, ...); ... iso_chan_add(conn, sk, parent); ... release_sock(parent); sock_put(parent); If the listener socket is closed concurrently, between iso_get_sock() and lock_sock(), the reference taken by iso_get_sock() may be the last one: the close path drops the link-list reference, and once iso_conn_ready() drops its own reference at the end of the function the socket is freed. The child socket, however, is already linked to the freed parent, and a later disconnect of the child runs iso_chan_del() -> bt_accept_unlink(), which dereferences the dangling parent pointer into the freed accept queue (a use-after-free). The same dangling pointer is also dereferenced through parent->***() in iso_chan_del(). Fix it the same way the connected (non-BIS) path was fixed in commit 0d255e63fcf3 ("Bluetooth: ISO: hold sk properly in iso_conn_ready"): after taking the socket lock, re-check that the parent is still a listening, alive socket, and bail out otherwise.
CVE-2026-80913 Desconhecida 04/09/2026
selinux: require every boolean value to be defined
In the Linux kernel, the following vulnerability has been resolved: selinux: require every boolean value to be defined p_bools.nprim comes from the policy image independently of how many booleans follow it, and cond_index_bool() fills bool_val_to_struct[] at value - 1, so a count larger than the values present leaves NULL entries. Every user of that array then walks it by index and dereferences each entry: cond_evaluate_expr() on the access-vector path, security_get_bools() and security_get_bool_value() behind selinuxfs, and security_set_bools(). A sparse class value is absorbed by policydb_class_isvalid() and its siblings; booleans have no such predicate, and no consumer that could use one. Reject a boolean value that no boolean defines, once, where the array is built. Conforming policies define every boolean they declare and are unaffected.
CVE-2026-80912 Desconhecida 04/09/2026
selinux: reject an unclaimed class value in security_get_classes()
In the Linux kernel, the following vulnerability has been resolved: selinux: reject an unclaimed class value in security_get_classes() security_get_classes() sizes an array by p_classes.nprim and fills it at value - 1, so a class value the policy never defines leaves a NULL. sel_make_classes() passes every entry to sel_make_dir(), reaching the same d_alloc_name() dereference as the permission array. The class symbol table is allowed to be sparse (policydb_class_isvalid() exists to absorb that), but this getter builds its own array straight from the hash table and has no such predicate. Fail the lookup when a value went unclaimed instead of handing out the NULL. Conforming policies define every class they declare and are unaffected.
CVE-2026-80911 Desconhecida 04/09/2026
ASoC: SOF: sof-audio: Fix error path in sof_widget_setup_unlocked()
In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: sof-audio: Fix error path in sof_widget_setup_unlocked() If either tplg_ops->dai_config or widget_kcontrol_setup fail during widget setup we would double decrement the use_count of the widget because the sof_widget_free_unlocked() would be called twice, similarly the core_put would be invoked twice as well. Since the use_count and core_put() is handled within the widget_free function we need to return without falling through the pipe_widget_free label. The fixes tag is picked to the last change around this part of the code which is adequately old enough for backporting purposes.