Vulnerabilidades do Linux Linux

In the Linux kernel, the following vulnerability has been resolved: regulator: fp9931: Fix VPOS/VNEG voltage selector table The VPOSNEG_table[] mapping does not match the FP9931 datasheet. The datasheet defines the VPOS/VNEG voltage mapping as: 00h-04h -> 7.04V (-7.04V) 05h -> 7.26V (-7.26V) 06h -> 7.49V (-7.49V) ... 28h-3Fh -> 15.06V (-15.06V) However, VPOSNEG_table[] has two issues: 1. Selector 0x00~0x04 should all map to 7.04V (5 entries), but the table has 6 entries of 7.04V, causing all subsequent entries to be shifted by one position. 2. Selectors 0x29~0x3F should all clamp to 15.06V (23 entries), but the table has only 41 entries. Any selector value above 0x28 would result in an out-of-bounds table access. Fix both issues by removing the duplicate 7.04V entry and appending the missing 23 clamped 15.06V entries, bringing the table to the correct size of 64 entries (0x00~0x3F).

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add bounds check for CRAT subtype length The CRAT parser validates that the subtype header fits within the image, but does not verify that the advertised subtype length fits. A malformed CRAT table with an oversized length field causes out-of-bounds reads when kfd_parse_subtype() casts the header to specific subtype structures. Add validation that sub_type_hdr + length does not exceed the image boundary before parsing the subtype contents. (cherry picked from commit 48e1d1e6e8798aef0312e68d8e586021b5b3cf4d)

In the Linux kernel, the following vulnerability has been resolved: drm/log: Fix out-of-bounds read on empty message length drm_log_draw_kmsg_record() accesses s[len - 1] to strip the trailing newline, but len is unsigned int. If len is 0, the subtraction wraps to UINT_MAX, causing an out-of-bounds read. Add an early return when len is 0.

In the Linux kernel, the following vulnerability has been resolved: serial: amba-pl011: synchronize DMA teardown dmaengine_terminate_all() does not wait for a running callback, so the TX callback can still touch the TX buffer after it is freed. The RX poll timer reads the RX buffers without the port lock. Switch to dmaengine_terminate_sync() and delete the RX timer before freeing the buffers.

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix bandwidth group reservation indexing Valid bandwidth group IDs range from 1 through MAX_GROUPS, while Group ID 0 is reserved. tb_consumed_dp_bandwidth() uses the Group ID directly to index its local group_reserved[] array. The array currently has MAX_GROUPS entries, so its valid indices are 0 through MAX_GROUPS - 1. Group ID MAX_GROUPS therefore accesses one element past the end, and the final group's reserved bandwidth is not included when the array is summed. Give group_reserved[] MAX_GROUPS + 1 entries so direct Group ID indexing covers the reserved ID 0 and valid IDs 1 through MAX_GROUPS.

In the Linux kernel, the following vulnerability has been resolved: ovpn: ensure socket is owned by ovpn before deref sk_user_data Some subsystems, like BPF SOCKMAP, set sk_user_data without actually setting the encap_type. For this reason, we must make sure that the type is the one ovpn expects before dereferencing sk_user_data. Failing to do so may lead to out-of-bounds reads.

In the Linux kernel, the following vulnerability has been resolved: bpf: Check sk_state before sk_protocol in bpf_tcp_*_syncookie bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie accept a socket pointer 'sk' with argument type ARG_PTR_TO_BTF_ID_SOCK_COMMON. However, they access sk->sk_protocol without validating whether 'sk' represents a full socket. Fix this issue by checking sk->sk_state != TCP_LISTEN before inspecting sk->sk_protocol in both bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie. Since mini-sockets are never in the TCP_LISTEN state, the condition short-circuits and prevents dereferencing fullsock-specific fields.

In the Linux kernel, the following vulnerability has been resolved: btrfs: initialize inode mapping flags for cached inodes [BUG] When running generic/795 with 8K block size, 4K page size, the test always fails, triggering some ASSERT()s related to folio size: 795 (241074): drop_caches: 3 assertion failed: IS_ALIGNED(start, blocksize) && IS_ALIGNED(end + 1, blocksize), in extent_io.c:1404 (blocksize=8192 root=262 ino=258 start=16826368 end=16830463 mapping min order=0) ------------[ cut here ]------------ kernel BUG at extent_io.c:1404! Oops: invalid opcode: 0000 [#1] SMP CPU: 8 UID: 0 PID: 241105 Comm: fsstress Tainted: G OE 7.2.0-rc5-custom+ #442 PREEMPT(full) f4bfb352566f3949f29c233ce6f735050a03b245 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:assert_folio_range.cold+0x3d/0x3f [btrfs] Call Trace: <TASK> btrfs_read_folio+0x9e/0x170 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] prepare_one_folio.constprop.0+0x104/0x2a0 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] btrfs_buffered_write+0x285/0xa50 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] btrfs_do_write_iter+0x1aa/0x210 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] iter_file_splice_write+0x31a/0x540 direct_splice_actor+0x53/0x170 splice_direct_to_actor+0xe9/0x240 do_splice_direct+0x76/0xb0 vfs_copy_file_range+0x1fd/0x630 __x64_sys_copy_file_range+0xf9/0x220 do_syscall_64+0xe1/0x790 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- The ASSERT() itself is added by a later patch. The crash is triggered with that new debug patch, and without this fix. [CAUSE] In the above case, the start 16826368 is properly 8K aligned, but the end (16830463 + 1) is not 8K aligned. Furthermore the mapping's minimal folio order is 0, not the expected 1 for 8K block size with 4K page size. So this means some inodes do not have btrfs_set_inode_mapping_order() called on it. The missing btrfs_set_inode_mapping_order() call happens for cached inodes, through the following events: - btrfs_create_new_inode() called for inode X Which properly sets minimal folio order for the VFS inode. - btrfs_update_inode() called for inode X Which calls btrfs_delayed_update_inode() to create a delayed_node into root->delayed_nodes xarray. - Drop cache/memory pressure, evicting in-memory inode X Which evicted the inode X, but delayed_node is still in root->delayed_nodes for future reuse. - btrfs_iget() for inode X called again btrfs_iget() |- btrfs_iget_locked() | |- iget5_locked_rcu() | Which creates a new vfs_inode for btrfs, whose mapping still | has the minimal order as 0. | |- btrfs_read_locked_inode() |- btrfs_fill_inode() | |- btrfs_get_delayed_node() | Which found out the previous node, and use that delayed | node to initialize the new inode. | |- filled = true; |- if (filled) goto cache_index; Which skips the btrfs_update_inode_mapping_flags() and btrfs_set_inode_mapping_order() calls. So the inode still has minimal folio order set as 0, not the required 1. Thus later page cache read will get a folio whose size is smaller than block size, as the mapping has its minimal folio order set as 0 not 1, then trigger the ASSERT(). [FIX] Move the btrfs_update_inode_mapping_flags() and btrfs_set_inode_mapping_order() calls under cache_index label, so that the mapping flags and minimal folio order is always set no matter if we have a cached inode.

In the Linux kernel, the following vulnerability has been resolved: ata: pata_sl82c105: fix bridge revision use-after-free pci_get_slot() returns a referenced PCI device. Commit 44c10138fd4b ("PCI: Change all drivers to use pci_device->revision") replaced a configuration-space read with direct access to the cached revision field, but left that access after pci_dev_put(). The bridge may therefore be freed before its revision is read. Read the revision before dropping the reference.

In the Linux kernel, the following vulnerability has been resolved: net: remove CAP_SYS_RAWIO zero-padding in dev_validate_header dev_validate_header() reads dev->hard_header_len directly when zero-padding short link layer headers for CAP_SYS_RAWIO holders: if (capable(CAP_SYS_RAWIO)) { memset(ll_header + len, 0, dev->hard_header_len - len); return true; } Packet send paths call dev_validate_header() on skbs whose headroom was allocated from an earlier hard_header_len read. If the device is reconfigured so that dev->hard_header_len increases before validation, the memset writes past the reserved buffer, an out-of-bounds write. This out-of-bounds write is masked in some SOCK_RAW paths today because the same concurrent increase can first make skb_push() exceed the reserved headroom and trigger skb_under_panic(). Remove the zero-padding branch before making those hard_header_len reads consistent, so the snapshot fixes do not turn a loud panic into a silent overwrite. This path is only reached for variable length L2 protocols, where len < hard_header_len but len >= min_header_len. No remaining in-tree variable length L2 protocol implements header_ops->validate, and the CAP_SYS_RAWIO bypass that zero-pads and accepts short headers has no real value beyond allowing testing of intentionally malformed input. Drop the CAP_SYS_RAWIO branch. The remaining reads of dev->hard_header_len in dev_validate_header() are comparisons only and have no memory safety impact.

In the Linux kernel, the following vulnerability has been resolved: ptp: vmclock: prevent read-only mappings from becoming writable vmclock_miscdev_mmap() rejects writable mappings of the shared vmclock ABI page with -EROFS, but leaves VM_MAYWRITE set. Userspace can map the page read-only and then upgrade it to writable with mprotect(), after which the guest can corrupt the host-written timekeeping data (sequence counter, UTC time, TSC offset) that the vmclock ABI defines as read-only. Clear VM_MAYWRITE on the read-only path so the mapping cannot be upgraded, as i915 does for its read-only objects and as fixed in drm/vc4 (CVE-2026-68445) and drm/panthor (CVE-2024-53071).

In the Linux kernel, the following vulnerability has been resolved: of: reserved_mem: prevent OOB when too many dynamic regions are defined On boot, fdt_scan_reserved_mem() saves each dynamically-placed /reserved-memory subnode into a local array of size MAX_RESERVED_REGIONS. If the device tree defines more than MAX_RESERVED_REGIONS dynamically-placed regions, fdt_scan_reserved_mem() writes past the end of the local array. Add a bounds check that logs an error and skips the excess regions, restoring the original behavior.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate individual TWT params before driver setup ieee80211_process_rx_twt_action() only partially validates a received S1G TWT setup frame before queueing it. An individual agreement can therefore reach ieee80211_s1g_rx_twt_setup() with twt->length too short for the full struct ieee80211_twt_params. The individual path passes twt to drv_add_twt_setup(). Both the tracepoint and the driver callback consume the complete parameters block, not merely req_type. Do not pass a short individual agreement to the driver. Broadcast agreements remain unchanged because they are rejected locally after accessing only req_type. [edit commit message to not overclaim lack of validation nor understate driver impact]

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: ensure no dangling hcon references in iso_conn After iso_conn_del(), ISO sockets should not dereference the hcon any more. Currently, clearing iso_conn::hcon relies on iso_conn_del() releasing the last reference to the iso_conn. Simplify this by explicitly clearing conn->hcon in iso_conn_del(), to avoid more complex reasoning on races about who holds the last reference.