Vulnerabilidades do Linux Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix RX data queuing of RRO 3.0 For RRO 3.0, RX data released from a RRO data queue should be put to the indicator queue. The frames are processed and completed in the context of the indicator queue NAPI, which only polls skbs queued on the MT_RXQ_RRO_IND list; frames queued under the data queue id are left sitting on that list until the data queue NAPI happens to run, stalling and reordering RX data.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix MLD ID in MAC TXD and HIF TXP Problem: MCU command timeout while the firmware state is normal, and the firmware keeps showing the error log "ERROR!! NO PAUSE...". Root cause: If the MLD_ID field in the TXD is neither the primary link id nor the secondary link id, it may lead to a firmware busy loop when the third link is in power saving mode. Remap frames directed to a third link to the primary link wcid. Since TX status events and txfree completions carry the wcid the firmware saw, use the remapped wcid for packet id tracking and non-AQL packet accounting as well, while the frame keeps its original link context for addressing, band and OMAC selection.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix non-AQL packet accounting for MLO stations __mt76_tx_queue_skb() overrides the wcid passed by the driver with sta->drv_priv, so the wcid might incorrectly be changed after TX, causing wcid->non_aql_packets to be counted on the wrong wcid. For example, on the AP side, if a station's setup link is the 5G link and the station uses 2G to transmit a frame, the value of non_aql_packets is increased on the 5G wcid but decreased on the 2G wcid. Once the inflated counter exceeds MT_MAX_NON_AQL_PKT, the TX scheduler permanently refuses to service the station. Drop the reassignment and account on the wcid used for transmission. This also records the actual wcid in the queue entry.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: validate RX band_idx before dereferencing phys[] band_idx comes from a 2-bit descriptor field (0-3) and was used directly to index dev->mt76.phys[] (size __MT_MAX_BAND == 3) and dereference the result. A corrupt or reserved descriptor value could index out of bounds or hit a NULL phy on parts with fewer bands. Reject invalid band indices, mirroring mt7996_rx_get_wcid().

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: clear wcid mask under mutex after RCU pointer clear mt7915_remove_interface() cleared the wcid mask bit with no lock held and before clearing the RCU wcid pointer. The mask is a non-atomic RMW shared with the allocators, which all run under dev->mt76.mutex; on DBDC the two wiphys share one mt76_dev, so this raced add_interface/sta_add on the other band and could leak or double-hand-out a wcid. Clearing the bit before the RCU pointer also let a concurrent allocation reuse the index and publish its wcid, which the subsequent NULL assignment then wiped. Move the clear into the existing mutex section, after the RCU pointer is cleared.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: bound TLV walk in mt7996_mcu_get_chip_config The response TLV loop advanced by tlv->len without a minimum, so a theoretical firmware response containing a zero-length TLV could spin forever, hanging the CPU during device probe. The u32 payload was also read without bounds checking. Reject a short fixed field, stop on a TLV whose length underruns the header or overruns the skb.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix out-of-bounds access in mmio copy helpers mt76_mmio_write_copy() and mt76_mmio_read_copy() iterate up to ALIGN(len, 4), so a length that is not a multiple of four reads past the source buffer (write_copy) or writes past the destination (read_copy). Copy the aligned body in the loop and handle the remaining tail through a 4-byte bounce buffer, keeping the register access width unchanged.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: unwind state on add_interface failure When mt76_wcid_alloc() fails, mt7915_add_interface() returned without clearing the vif_mask/omac_mask bits it had already set, without removing the firmware dev info added earlier, and without clearing a monitor_vif pointer to the vif mac80211 is about to free. mac80211 does not call remove_interface() for a failed add, so the indices and firmware dev entry leaked permanently and testmode could dereference the stale monitor_vif. Add a proper error unwind.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: reserve space for the CSA-abort countdown TLV When a CSA countdown is active, mt7996_mcu_beacon_cntdwn() emits two bss_bcn_cntdwn_tlv entries (the CSA countdown and the CCA-abort BCC), but MT7996_BEACON_UPDATE_SIZE only reserved one. With MBSSID enabled and a near-maximum beacon template the extra 8 bytes could push the offload command past MT7996_MAX_BSS_OFFLOAD_SIZE and trigger skb_over_panic(). Reserve room for both countdown TLVs.

In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: Unregister cpufreq notifier on init failure acpi_processor_driver_init() registers the cpufreq policy notifier before registering the ACPI processor driver and setting up CPU hotplug state. If driver_register() or cpuhp_setup_state() fails, the error path only unregisters the ACPI processor driver and the idle driver. The cpufreq notifier remains registered even though initialization failed. Mirror the module exit path on the init failure path and unregister the cpufreq notifier when it has been registered.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: don't tear down KMS twice when KMS init fails When priv->kms_init() (mdp4_kms_init() / mdp5_kms_init()) fails partway through, both display drivers already tear their KMS state down via mdp4_destroy() / mdp5_kms_destroy() before returning the error. The common error path in msm_drm_init() then runs msm_drm_uninit() -> msm_drm_kms_uninit(), which tries to destroy the very same KMS a second time, which causes a use-after-free crash. Bring MDP4/MDP5 in line with the DPU driver whose dpu_kms_init() doesn't perform error cleanup on the failure. Let the common path own the cleanup, instead of freeing the KMS from their error paths. The crash trace for the reference: __lock_acquire from lock_acquire (kernel/locking/lockdep.c:5906 kernel/locking/lockdep.c:5863) lock_acquire from touch_wq_lockdep_map (kernel/workqueue.c:4094 (discriminator 1)) touch_wq_lockdep_map from __flush_workqueue (kernel/workqueue.c:4136) __flush_workqueue from msm_drm_kms_uninit (drivers/gpu/drm/msm/msm_kms.c:243 (discriminator 33)) msm_drm_kms_uninit from msm_drm_uninit (drivers/gpu/drm/msm/msm_drv.c:93) msm_drm_uninit from msm_drm_init (drivers/gpu/drm/msm/msm_drv.c:184) msm_drm_init from try_to_bring_up_aggregate_device (drivers/base/component.c:249 drivers/base/component.c:227) try_to_bring_up_aggregate_device from __component_add (drivers/base/component.c:269 drivers/base/component.c:748) __component_add from dsi_host_attach (drivers/gpu/drm/msm/dsi/dsi_host.c:1739) dsi_host_attach from mipi_dsi_attach (drivers/gpu/drm/drm_mipi_dsi.c:383) mipi_dsi_attach from sharp_nt_panel_probe (drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c:247) Patchwork: https://patchwork.freedesktop.org/patch/742068/

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dsi: Drop dev_pm_opp_set_rate(0) dev_pm_opp_set_rate(0) removes the vote specified in required-opps but does not actually park the clock, making it run without the necessary power backing. Drop the explicit call to it. Every call site of ops->link_clk_disable() is followed by pm_runtime_put(), so the power vote will be rescinded if deemed safe. Patchwork: https://patchwork.freedesktop.org/patch/742783/

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix leak in ath11k_service_ready_ext_event() Currently, during ath11k_service_ready_ext_event() processing, svc_rdy_ext.mac_phy_caps can be allocated during TLV parsing. This is a temporary allocation that is freed on the success path, but not on the error path. If parsing succeeds far enough to allocate mac_phy_caps and then fails on a later TLV, the allocation leaks. So free the allocation on the error path. Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: cancel reset and rc work on device unregister Both drivers cancelled dump_work on unregister but left reset_work and rc_work to be flushed only by destroy_workqueue() in mt76_free_device(), which runs after the hw is unregistered and the hardware stopped. A reset_work that fires in that window calls ieee80211_restart_hw() and re-arms mac_work on an unregistered hw, and rc_work touches station state being torn down. Cancel both up front, alongside dump_work.

In the Linux kernel, the following vulnerability has been resolved: regulator: core: use system_freezable_wq for init complete work schedule_delayed_work() uses system_wq, which is non-freezable, allowing regulator_init_complete_work to run concurrently with system suspend. This work fires ~30s after boot to disable unused regulators via I2C. When it races with PM suspend, the I2C adapter may already be suspended, triggering a -ESHUTDOWN warning in __i2c_transfer(): WARNING: ... at __i2c_transfer+0x36c/0x3c8 Call trace: __i2c_transfer i2c_transfer regmap_i2c_write _regmap_update_bits regulator_disable_regmap _regulator_do_disable regulator_late_cleanup regulator_init_complete_work_function process_one_work Switch to system_freezable_wq so the work is frozen before any device is suspended, eliminating the race.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: free vif links after clearing wcid entries on full reset mt7996_mac_reset_vif_iter() queues non-default vif links for kfree_rcu while dev->wcid[] still holds pointers to the wcid embedded in each freed link; mt76_reset_device() then dereferences those entries and runs mt76_wcid_cleanup() on them. If a grace period elapses in between, the cleanup operates on freed memory. Run mt76_reset_device() first, so the wcid entries are cleaned up and cleared while the links are still valid.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: fix double hif2 init on the non-WED path mt7915_pci_init_hif2() was called unconditionally and again inside the WED-inactive branch. The helper increments the global hif_idx, writes the PCIe RECOG_ID register and takes a get_device() reference via mt7915_pci_get_hif2(), while removal only drops one reference. On non-WED dual-hif hardware this double-incremented hif_idx, wrote RECOG_ID twice and leaked a device reference. Only the call inside the WED-inactive branch is correct; drop the unconditional one. hif2 is already initialised to NULL.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: release hif2 reference on probe IRQ failure The hif2 reference obtained by mt7915_pci_init_hif2() is only released on error paths that key off dev->hif2, which is not assigned until after the IRQ setup. If pci_alloc_irq_vectors() or the primary devm_request_irq() fails, the reference leaks. Drop it explicitly on those paths via mt7915_put_hif2().