Vulnerabilidades do Linux Linux

In the Linux kernel, the following vulnerability has been resolved: net/sched: bound qdisc_pkt_len to prevent qdisc soft lockup qdisc_get_stab() accepts a user-supplied size table, and __qdisc_calculate_pkt_len() amplifies qdisc_pkt_len() through the overhead, the size-table data (u16), and size_log (up to STAB_SIZE_LOG_MAX). A crafted stab can therefore set qdisc_pkt_len() to ~1 GiB for an ordinary skb. Per-flow deficit schedulers such as DRR and ETS replenish one quantum per loop iteration; with a tiny quantum (1) they spin billions of times under the qdisc lock, producing a soft lockup / RCU stall as illustrated by vega@nebusec.ai. Cap the final qdisc_pkt_len() to QDISC_PKT_LEN_MAX so the size-table amplification cannot drive deficit schedulers into an unbounded loop. A legitimate size table (e.g. qfq's overhead 999999999, which is handled by dropping) is still accepted. Introduce cap QDISC_PKT_LEN_MAX (1 << 20) = 1 MiB which is well above any legitimate single-skb wire length: the largest current skb->len is GSO_MAX_SIZE (524280), and an ATM-style size table (53/48 cell tax) amplifies that to ~578 KB, both comfortably below 1 MiB. At the same time, 1 MiB bounds the deficit refill loop to ~1M iterations per packet with quantum=1, which completes in a few milliseconds well under the demonstrated softlockup threshold (~10^9 iterations). Conditions to recreate the bug: - CONFIG_NET_SCHED=y, CONFIG_NET_SCH_DRR=y (or CONFIG_NET_SCH_ETS=y). - Attach a DRR (or ETS) root qdisc with a crafted TCA_STAB that amplifies qdisc_pkt_len to ~1 GiB (e.g. size_log=15, data=[32768]). - Add a class with a tiny quantum of 1 and send one small packet; the deficit loop spins billions of times under the qdisc lock and trips the softlockup detector (panic with kernel.softlockup_panic=1). - Reachable as root or from an unprivileged user in a fresh user+net namespace (unshare -Urn) with namespace-local CAP_NET_ADMIN.

In the Linux kernel, the following vulnerability has been resolved: net: fec: only stop PTP if it was initialized fec_ptp_init() is only called when fep->bufdesc_ex is available. However, fec_probe() unconditionally calls fec_ptp_stop() on the failed_init path, and fec_drv_remove() unconditionally calls fec_ptp_stop() during device removal. Check fep->bufdesc_ex before calling fec_ptp_stop() in both paths to avoid stopping PTP when it was not initialized.

In the Linux kernel, the following vulnerability has been resolved: usb: atm: usbatm: fix invalid ci_range initialization syzbot reported a shift-out-of-bounds in __vcc_connect(): UBSAN: shift-out-of-bounds in net/atm/common.c:382:32 shift exponent -1 is negative CPU: 0 UID: 0 PID: 5987 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/05/2026 Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 ubsan_epilogue+0xa/0x30 lib/ubsan.c:233 __ubsan_handle_shift_out_of_bounds+0x36d/0x400 lib/ubsan.c:494 __vcc_connect+0x14b4/0x19c0 net/atm/common.c:382 vcc_connect+0x328/0x8f0 net/atm/common.c:498 pvc_bind+0x272/0x380 net/atm/pvc.c:52 __sys_bind+0x2e3/0x410 net/socket.c:1976 __x64_sys_bind+0x7a/0x90 net/socket.c:1979 ... ATM device ci_range fields (vpi_bits and vci_bits) represent the number of bits supported for VPI and VCI addressing on the device. net/atm/common.c directly uses these fields as bit shift counts: vpi >> dev->ci_range.vpi_bits vci >> dev->ci_range.vci_bits 1 << vcc->dev->ci_range.vpi_bits 1 << vcc->dev->ci_range.vci_bits usbatm_atm_init() sets ci_range.vpi_bits and ci_range.vci_bits to ATM_CI_MAX (-1), which is defined in <uapi/linux/atmdev.h> as a sentinel value for userspace ATM_SETCIRANGE requests, not a valid bit count. Shifting by -1 is undefined behavior and triggers UBSAN warnings. ATM UNI cell headers allow up to 8 bits for VPI (0..255) and 16 bits for VCI (0..65535). Initialize vpi_bits to 8 and vci_bits to 16, as done by solos-pci.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: skip double clone set expressions on element insert Both the dynset and newsetelem path clone the existing set expressions when setting set element expressions if no override expressions are provided. This results in a double clone, once to clone the template set expressions then another clone on the new element. Add a flag to annotate if userspace provides a override expression (ie. expression of the same type of the set but different configuration), otherwise borrow the existing expression from the set. Add conditionals to release expression iif they represent an override. Use this new override_exprs flag to dump the dynset expression override to userspace. This simplifies the existing logic and it also fixes a bug with the connlimit expression which results in a module refcount imbalance WARNING splat when resorting on the default set expressions.

In the Linux kernel, the following vulnerability has been resolved: tcp: fix corruption of urgent data on multi-segment retransmit On the normal xmit path, while in urgent mode we refuse to build a multi-segment TSO packet, so every segment gets its own urg_ptr: /* tcp_write_xmit() */ limit = mss_now; if (tso_segs > 1 && !tcp_urg_mode(tp)) limit = tcp_mss_split_point(...); The retransmit path has no such guard. __tcp_retransmit_skb() builds a segs > 1 skb and hands it to the GSO layer, which only advances th->seq per segment and copies urg_ptr verbatim: /* __tcp_retransmit_skb() */ len = cur_mss * segs; /* segs > 1, no urg_mode check */ ... /* tcp_gso_segment(): bumps seq only, urg_ptr is copied */ urg_ptr is an offset from the segment's own seq, so a copied value points at a different place on each segment. The receiver rebuilds the absolute urgent seq as seg.seq + urg_ptr, so it walks a moving urgent point instead of the one OOB byte: seg1 seq 1 urg_ptr 5001 -> urgent @ 5001 (ok) seg2 seq 1001 urg_ptr 5001 -> urgent @ 6001 (wrong, +MSS) seg3 seq 2001 urg_ptr 5001 -> urgent @ 7001 (wrong, +2*MSS) The real OOB byte is never pointed at, so the receiver stops splicing it out and delivers it as normal in-band data, corrupting the stream. Guard the retransmit length like the xmit path: keep segs = 1 while in urgent mode.

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_htb: limit htb_classify inner-class filter hops htb_classify() follows each filter-selected inner class by switching to cl->filter_list, but never bounds the number of hops. A filter on an inner class can point back to itself or to another inner class that points back, creating an infinite loop in the packet classification path with the qdisc lock held and BH disabled — a soft lockup / panic from a single packet. Bound the traversal with a hop counter and drop the packet with a rate-limited warning once the bound is exceeded. The counter is incremented at the point the inner filter chain is picked up, after the TC_ACT_* switch has consumed the classifier verdict, so a terminal TC_ACT_QUEUED/STOLEN/TRAP on the last permitted chain still sets *qerr to __NET_XMIT_STOLEN and the packet is not charged as a drop by this qdisc or its parent. The bound is TC_HTB_MAXDEPTH, taken from HTB's own parameters rather than from the qdisc hierarchy depth limit. Class levels run from 0 to TC_HTB_MAXDEPTH - 1, so a traversal that strictly descends in level can take at most TC_HTB_MAXDEPTH hops. That descent is what a sane configuration does, but it is assumed here rather than enforced: htb_find() resolves a classid against every class in the qdisc, so a filter may equally select a sibling or an ancestor. The normal root -> inner -> leaf path takes a single hop, so the bound does not affect legitimate classification. htb_classify() can now return NULL irrespective of CONFIG_NET_CLS_ACT, whereas previously every NULL return sat inside that ifdef. The NULL handler in htb_enqueue() therefore cannot stay conditional either, so drop the ifdef around it. This matches hfsc_enqueue(), which has always handled a NULL class unconditionally. Without it, a kernel built without actions would dereference a NULL class instead of dropping. Conditions to recreate the bug: - CONFIG_NET_SCHED, CONFIG_NET_SCH_HTB, CONFIG_NET_CLS_U32, CONFIG_LOCKUP_DETECTOR. - Create an HTB qdisc on a device (e.g. lo), add an inner class 1:1 with a leaf child 1:10, install a root u32 filter selecting 1:1, and an inner-class u32 filter on 1:1 also selecting 1:1. - Send one packet (ping). On the unfixed kernel the classify loop spins with the qdisc lock held; with softlockup_panic=1 it panics. - Reachable from unprivileged user via unshare -Urn (CAP_NET_ADMIN).

In the Linux kernel, the following vulnerability has been resolved: NFSD: Guard admin state-revocation walks with NFSD_NET_UP Writing to /proc/fs/nfsd/unlock_filesystem, or sending the NFSD_CMD_UNLOCK_FILESYSTEM or NFSD_CMD_UNLOCK_EXPORT netlink command, walks the NFSv4 client hash tables to revoke open state and cancel async COPY operations. All three handlers gate that walk on nn->nfsd_serv, but a listener added via portlist or netlink listener_set sets nn->nfsd_serv before any nfsd thread starts. nfsd_startup_net() has not yet allocated nn->conf_id_hashtbl, so the walkers dereference a NULL table. A local administrator with CAP_SYS_ADMIN can crash the kernel this way without ever starting the server. nn->nfsd_serv is set when the service is created, which precedes table allocation. NFSD_NET_UP instead brackets the window where the tables are live: set at the end of nfsd_startup_net() and cleared in nfsd_shutdown_net() after they are freed, both under nfsd_mutex. Gating the three unlock paths on NFSD_NET_UP fixes the startup-time NULL dereference while preserving the earlier post-shutdown use-after-free fix.

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Forcefully invalidate SNP VMSA if its backing gmem page is zapped Wire up a gmem_invalidate_range() call for SNP VMs, and use it to force vCPUs to reload/recheck their guest-provided VMSA if the backing gmem page is being invalidated, e.g. is being PUNCH_HOLE'd. Use the same core logic to handle invalidations as VMX does for the APIC-access page, as the two concepts are nearly identical: shove the physical address of a page into the vCPU's control structure: 1. Snapshot the invalidation sequence counter 2. Grab the pfn (from guest_memfd in this case) 3. Acquire mmu_lock for read 4. Re-request reload if retry is needed, otherwise commit the change. Note, the re-request action in #4 is necessary as KVM's retry logic is fuzzy, i.e. can get false positives. If the guest_memfd page has been dropped, at some point a subsequent reload will fail to get a PFN from guest_memfd, and KVM will fail KVM_RUN. If the retry was due to a false positive, KVM will retry until there are no relevant MMU notifier events (and will retry in the "outer" loop, i.e. will drop locks and resched as needed). Note #2! Take care to invalidate the VMSA when a relevant memslot is DELETED or MOVED, as invalidations in response to PUNCH_HOLE are predicated on memslot bindings (KVM doesn't know what GFN range(s) to invalidate without a binding). And more importantly, the VMSA mapping requires a memslot, i.e. must be invalidated if its memslots disappears, regardless of the state of the underlying guest_memfd inode. Failure to invalidate the vCPU's control.vmsa_pa (which is checked by pre_sev_run()) can prevent KVM from properly freeing the page as firmware will reject the RMPUPDATE to reclaim the page with FAIL_INUSE if the vCPU is actively running, i.e. if VMSA page is in-use. That in turn leads to an RMP #PF on the next use, as the page will still be assigned to the SNP VM. SEV-SNP: RMPUPDATE failed for PFN 78d198, pg_level: 1, ret: 3 SEV-SNP: PFN 0x78d198, RMP entry: [0xfff0000000144001 - 0x000000000000000f] CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026 Call Trace: <TASK> dump_stack_lvl+0x54/0x70 rmpupdate+0x12c/0x140 rmp_make_shared+0x3b/0x60 sev_gmem_invalidate+0xe0/0x170 [kvm_amd] delete_from_page_cache_batch+0x1d8/0x220 truncate_inode_pages_range+0x120/0x3d0 kvm_gmem_fallocate+0x19a/0x270 [kvm] vfs_fallocate+0x1bc/0x1f0 __x64_sys_fallocate+0x48/0x70 do_syscall_64+0x10a/0x480 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x496c7e </TASK> ------------[ cut here ]------------ SEV: Failed to update RMP entry for PFN 0x78d198 error -14 WARNING: arch/x86/kvm/svm/sev.c:5160 at sev_gmem_invalidate+0x126/0x170 [kvm_amd], CPU#3: sev_snp_vmsa_pu/31345 CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026 RIP: 0010:sev_gmem_invalidate+0x12b/0x170 [kvm_amd] Call Trace: <TASK> delete_from_page_cache_batch+0x1d8/0x220 truncate_inode_pages_range+0x120/0x3d0 kvm_gmem_fallocate+0x19a/0x270 [kvm] vfs_fallocate+0x1bc/0x1f0 __x64_sys_fallocate+0x48/0x70 do_syscall_64+0x10a/0x480 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x496c7e </TASK> irq event stamp: 20689 hardirqs last enabled at (20699): [<ffffffff8e76092c>] __console_unlock+0x5c/0x60 hardirqs last disabled at (20708): [<ffffffff8e760911>] __console_unlock+0x41/0x60 softirqs last enabled at (20722): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140 softirqs last disabled at (20717): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140 ---[ end trace 0000000000000000 ]--- BUG: unable to handle page fault for address: ffff99 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix division by zero in get_estimated_bw() get_estimated_bw() divides by link->dpia_bw_alloc_config.bw_granularity, which is zeroed by reset_bw_alloc_struct() and only populated once DP_TUNNELING_BW_ALLOC_CAP_CHANGED has been handled. link_dp_dpia_handle_bw_alloc_status(), the DPCD interrupt handler, calls get_estimated_bw() whenever DP_TUNNELING_ESTIMATED_BW_CHANGED is set, independently of whether DP_TUNNELING_BW_ALLOC_CAP_CHANGED has ever fired for that link. A connected USB4/DPIA tunneling device that reports an estimated-bandwidth change before ever reporting a capability change drives a division by zero in this IRQ path. link_dpia_send_bw_alloc_request() already guards the same bw_granularity division; add the identical guard here rather than introducing a new pattern. (cherry picked from commit f2a961457c33dc34223aad5c9e8971de34a4eed3)

In the Linux kernel, the following vulnerability has been resolved: usb: image: mdc800: change kmalloc() to kzalloc() Change the kmalloc() calls in usb_mdc800_init() for irq_urb_buffer and download_urb_buffer to kzalloc(), avoiding potential stack leaks if a shorter message is received in mdc800_usb_irq() and mdc800_usb_download_notify()