Vulnerabilidades do OpenSIPS OpenSIPS
🔔 Criar alerta RSS Verificador de versão
CVEs publicadas que afetam OpenSIPS OpenSIPS: 9 registro(s), com versões afetadas e correções.
CVE-2026-46334
Alta · 8.7
CWE-20 04/08/2026
OpenSIPS: Denial of Service in SDP bandwidth parsing via QoS SDP cloning
OpenSIPS is a Session Initiation Protocol (SIP) server implementation. Versions prior to 3.6.6 and 4.0.0-rc1 contain a denial of service vulnerability in the SDP bandwidth-line parsing logic. A SIP request with Content-Type: application/sdp and a malformed session-level SDP bandwidth line missing the required colon delimiter can corrupt parsed SDP bandwidth metadata. When a route or module subsequently clones the corrupted SDP state, as occurs with dialog and QoS processing, the OpenSIPS worker process crashes. An unauthenticated remote attacker can therefore trigger a crash in any configuration whose routing script parses attacker-controlled SDP and applies dialog/QoS processing. This issue has been fixed in versions 3.6.6 and 4.0.0-rc1.
CVE-2026-45809
Alta · 8.7
CWE-121 04/08/2026
OpenSIPS: Denial of Service in watcherinfo XML generation from oversized watcher URI
OpenSIPS is a Session Initiation Protocol (SIP) server implementation. Versions prior to 3.6.6 and 4.0.0-rc1 contain a denial of service vulnerability in the watcherinfo generation functionality. An attacker can create an oversized watcher entry by sending a SUBSCRIBE Event: presence request with a long From URI, and then trigger presence.winfo watcherinfo XML generation for the same presentity. OpenSIPS copies the stored watcher URI into a fixed-size stack buffer, overflowing it and crashing the process. A remote attacker can crash an OpenSIPS worker in deployments that expose handle_subscribe() and allow watcherinfo (presence.winfo) generation. The issue is configuration-dependent because the presence and presence_xml modules must be loaded and SUBSCRIBE routing must be reachable. This issue has been fixed in versions 3.6.6 and 4.0.0-rc1.
CVE-2026-45705
Média · 5.3
CWE-125 04/08/2026
OpenSIPS: OOB Read in Multipart Body Boundary Parsing
OpenSIPS is a Session Initiation Protocol (SIP) server implementation. In versions prior to 3.6.6 and 4.0.0-rc1, the find_line_delimiter() function in the multipart body parser performs an out-of-bounds read via strncmp() when searching for MIME boundary delimiters. After finding a -- pattern near the end of the body, the function compares delimiter.len bytes (typically 20-70) starting from a position at or past the logical end of the body buffer, reading past the body boundary. The bug triggers when a SIP message has Content-Type: multipart/mixed with a boundary parameter and its body contains -- within two to three bytes of the body's end without being followed by the actual boundary delimiter. This issue has been fixed in versions 3.6.6 and 4.0.0-rc1.
CVE-2026-45537
Crítica · 9.1
CWE-120 04/08/2026
OpenSIPS: Global Buffer Overflow in construct_uri
OpenSIPS is a Session Initiation Protocol (SIP) server implementation. In versions prior to 3.6.6 and 4.0.0-rc1, the construct_uri() function concatenates multiple URI components (protocol, username, domain, port, params) into a fixed 1024-byte global BSS buffer without any bounds checking. When a routing script calls construct_uri() with an attacker-controlled username, a combined component length exceeding 1024 bytes overflows the buffer, corrupting adjacent global data with attacker-controlled content. The overflow reaches disable_503_translation, a global flag controlling SIP 503 response handling, allowing an attacker to deterministically set the flag via the URI username and alter the server's routing behavior for subsequent messages. Because the same buffer is shared with contact_builder(), the overflow also corrupts that function's data, and without a memory sanitizer the adjacent globals are silently overwritten on every request containing a long username. This issue has been fixed in versions 3.6.6 and 4.0.0-rc1.
CVE-2026-45103
Alta · 7.5
CWE-190 04/08/2026
OpenSIPS: SIP Message Smuggling via TCP Content-Length Integer Overflow
OpenSIPS is a Session Initiation Protocol (SIP) server implementation. In versions prior to 3.6.6 and 4.0.0-rc1, the TCP message framing layer parses the Content-Length header using unsigned int arithmetic with no overflow check. When an attacker sends a Content-Length value that overflows unsigned int (e.g., 4294967296), the framing layer computes a wrapped-around value (e.g., 0) and splits the TCP stream at the wrong boundary, causing the body of the first SIP message to be processed as a separate message and enabling SIP message smuggling. Because Content-Length is parsed in the transport layer before authentication, an unauthenticated, network-based attacker can smuggle arbitrary SIP messages over any TCP-based transport (proto_tcp, proto_tls, proto_ws, proto_wss) on any instance with TCP enabled, with no routing-script preconditions. This allows smuggled messages to bypass front-end SBC/proxy security policies, inherit the connection's authentication context, and evade rate limiting. This issue has been fixed in versions 3.6.6 and 4.0.0-rc1.
CVE-2026-45100
Crítica · 9.1
CWE-120 04/08/2026
OpenSIPS: Buffer Overflow in Base64 Encode Transformation
OpenSIPS is a Session Initiation Protocol (SIP) server implementation. Versions 3.4.0-beta through 3.6.5 and 4.0.0-beta contain a buffer overflow in the {s.b64encode} string transformation. The size check for {s.b64encode} only verifies that the input fits within the 64 KB transformation buffer, but base64 encoding expands the data by roughly a third, so an input between about 49,153 and 65,535 bytes produces more output than the buffer can hold and overflows it by up to 21,844 bytes. Because these transformation buffers sit next to each other in memory and are reused for chained transformations, the overflow writes attacker-controlled data into the adjacent buffer and corrupts values used by later transformations processing the same SIP message. A remote attacker can trigger this by sending a SIP message with a large header value (roughly 50,000 bytes or more) when the routing script applies {s.b64encode} to attacker-controlled input, making exploitability dependent on the deployment's routing configuration. This issue has been fixed in versions 3.6.6 and 4.0.0-rc1.
CVE-2026-45084
Alta · 8.7
CWE-476 04/08/2026
OpenSIPS: Denial of service in presence.handle_publish() from unchecked Content-Type state
OpenSIPS is a Session Initiation Protocol (SIP) server implementation. Versions 3.4.0 through 3.6.5 contain a denial of service vulnerability in the presence module. When the presence module's handle_publish() function processes a SIP PUBLISH request with an Event: presence header and a message body while the configuration option enable_sphere_check=1 is set, it invokes the get_content_type() macro without first calling parse_content_type_hdr(), causing it to dereference uninitialized or NULL Content-Type parsing state and crash. If a Content-Type header is present but unparsed, msg->content_type->parsed is NULL and is dereferenced as a content_t pointer; if the request lacks a Content-Type header entirely, msg->content_type itself is NULL, and both cases lead to a crash. A remote attacker can therefore cause a denial of service against an affected instance with a single PUBLISH request over UDP or TCP, using either a valid Content-Type: application/pidf+xml request or one with the header removed, and the vulnerable code path itself does not enforce authentication (though a deployment's routing configuration may require it before this route is reached). The issue has been fixed in version 3.6.6 and 4.0.0-rc1.
CVE-2026-45538
Crítica · 9.8
CWE-121 04/08/2026
OpenSIPS: Stack Buffer Overflow in sip_to_json() Header Name Copy
OpenSIPS is a Session Initiation Protocol (SIP) server implementation. In versions 4.0.0 and prior, processing a SIP message with a header name longer than 255 bytes causes a stack buffer overflow when sip_to_json() is called in the routing script. Function sip_to_json() (modules/sipmsgops/sipmsgops.c) copies SIP header names into a fixed 255-byte stack buffer without bounds checking, performing a memcpy of the full header-name length even though the SIP parser imposes no such limit (a header name can be roughly 65000 bytes). As a result, when a routing script calls sip_to_json(), a SIP message with a header name longer than 255 bytes triggers a stack buffer overflow in which both the length and content of the overwrite are attacker-controlled, corrupting the saved frame pointer and return address. A single unauthenticated UDP packet to the SIP port (5060) can crash the process or, on builds without stack protections, hijack the return address to achieve remote code execution. This affects deployments whose routing script invokes sip_to_json(). This issue was not fixed at the time of publication.
CVE-2026-25554
Média · 6.5
CWE-89 25/02/2026
OpenSIPS 3.1 <= 3.6.4 auth_jwt SQL Injection Enables JWT Authentication Bypass
OpenSIPS versions 3.1 before 3.6.4 containing the auth_jwt module (prior to commit 3822d33) contain a SQL injection vulnerability in the jwt_db_authorize() function in modules/auth_jwt/authorize.c when db_mode is enabled and a SQL database backend is used. The function extracts the tag claim from a JWT without prior signature verification and incorporates the unescaped value directly into a SQL query. An attacker can supply a crafted JWT with a malicious tag claim to manipulate the query result and bypass JWT authentication, allowing impersonation of arbitrary identities.