Vulnerabilidades do wolfSSL Wolfssl

Un-negotiated Raw Public Key (RFC 7250) accepted in place of an X.509 certificate, bypassing chain validation. A raw public key has no chain, so ParseCertRelative() accepts it without performing any trust verification; it must therefore only be accepted when RPK was actually negotiated for that peer. The check now defaults the expected type to X.509 (per RFC 7250/8446) when no type was negotiated, comparing against the received server certificate type on the client and the selected client certificate type on the server, and rejects any mismatch, including an un-negotiated raw public key, with UNSUPPORTED_CERTIFICATE. Only affects builds with Raw Public Key support (HAVE_RPK) enabled - disabled by default in a standalone build, but included in --enable-all.

Out-of-bounds write in the Renesas TSIP TLS 1.3 transcript buffer. In tsip_StoreMessage() the capacity check guarding the fixed message bag (MSGBAG_SIZE) sets an error code but fails to return, so execution falls through to an XMEMCPY that writes past the end of the buffer once the accumulated TLS 1.3 handshake transcript exceeds MSGBAG_SIZE (8 KB), corrupting adjacent heap state and potentially causing a remote denial of service crash. The bag is sized to hold a normal handshake, so this is reached only by an unusually large but valid certificate chain, or by a malicious or man-in-the-middle server sending an oversized handshake message to a client that does not strictly verify the chain. This only affects builds using the Renesas TSIP TLS port (WOLFSSL_RENESAS_TSIP_TLS) as a TLS 1.3 client on Renesas MCUs with TSIP hardware enabled, and is rated High within those builds. All other configurations are unaffected.

Out-of-bounds heap read during SM2/SM3 certificate signature verification. When parsing a certificate with an SM3wSM2 signature, the Subject Key Identifier computation reads the trailing 65 bytes of the public key without checking that the key is at least that long. A public key shorter than 65 bytes results in an out-of-bounds heap read, leading to a potential crash (denial of service); there is no out-of-bounds write. Note this only affects builds with SM2 support (--enable-sm2 or --enable-all).

X.509 trust-chain bypass in the OpenSSL compatibility certificate verifier (wolfSSL_X509_verify_cert()). This affects only builds with --enable-opensslextra (OPENSSL_EXTRA) and whose application validates certificates by calling X509_verify_cert() with caller-supplied untrusted intermediate certificates; for those users it is critical, otherwise the library is unaffected. In particular, native wolfSSL TLS/DTLS usage is not impacted. wolfSSL's X509_verify_cert() temporarily loads each caller-supplied untrusted intermediate into the certificate manager but failed to drop them before the trusted-store check, so an untrusted intermediate could anchor the path itself. An attacker can present a chain that never reaches a configured trust anchor and have it accepted, resulting in acceptance of an attacker-controlled certificate. This is certificate verification independent of TLS (e.g. S/MIME/CMS, code/firmware signing, JWT/JWS x5c), is not specific to any key type or algorithm, and a single untrusted intermediate suffices. The default wolfSSL TLS handshake (WOLFSSL_VERIFY_PEER) is not affected; only TLS applications doing manual or deferred peer verification through this API are, which also requires --enable-sessioncerts.

The X25519 x86_64 assembly implementation fails to clear the most significant bit during the final modular reduction, so the computed result may not be fully reduced modulo the field prime 2^255 - 19. This can leave the field element in a non-canonical form, producing an incorrect result from the scalar multiplication and potentially a wrong shared secret. The final carry-propagation chains in the x64 and AVX2 reduction routines could overflow into the top bit, and the high limb was not masked afterward, so the 255-bit field element was left non-canonical.

wolfSSL's AVX2-optimized ML-KEM implementation (mlkem_cmp_avx2) compares only 1536 of the 1568 ciphertext bytes during the Fujisaki-Okamoto re-encryption check in ML-KEM-1024 decapsulation. Ciphertexts that differ from the expected re-encryption solely in bytes 1536-1567 bypass implicit rejection and are accepted as valid, breaking IND-CCA2 security. An attacker able to submit chosen ciphertexts to a decapsulation oracle that uses a static ML-KEM-1024 key, and to observe whether the genuine shared secret or the implicit-rejection secret was produced, can use this as a plaintext-checking oracle to recover the private key. A proof of concept recovered a full ML-KEM-1024 private key with approximately 98% success using roughly 350 chosen ciphertexts. The flaw is a deterministic logic error and does not rely on timing measurements.

AES-GCM encryption/decryption with extremely large cumulative single message sizes (>64 GiB) were not properly rejected by the streaming APIs, allowing counter wrap, keystream reuse, and consequent plaintext recovery.

wolfSSL_PKCS7_verify() returning success for a degenerate (certs-only) PKCS#7 object that contains no signer. Such an object has empty signerInfos, so the underlying signed-data verification succeeds without authenticating any content. The compatibility-layer verify path now rejects the object when no signer signature has actually been verified, so a PKCS#7 carrying no valid signature is no longer reported as verified. This is enforced regardless of the PKCS7_NOVERIFY flag, which only suppresses signer certificate chain validation and was never intended to waive the requirement that a signature exist. Only affects OpenSSL compatibility builds that call the PKCS7_verify() compatibility API on potentially degenerate PKCS#7 bundles.

X.509 trust-chain bypass (path-depth exhaustion) in the OpenSSL compatibility certificate verifier (wolfSSL_X509_verify_cert()). This affects only builds with --enable-opensslextra whose application calls X509_verify_cert() with caller-supplied untrusted intermediates; for those users it is critical, otherwise the library is unaffected. Native wolfSSL TLS/DTLS usage is not impacted. X509_verify_cert() returned success based only on the last verified link rather than on reaching a trust anchor: when the supplied chain is deeper than the verifier's maximum path depth (default 100), path building runs out of depth while still walking untrusted intermediates and the chain is accepted even though it never reaches a configured trust anchor, allowing acceptance of an attacker-controlled certificate. The default TLS handshake (WOLFSSL_VERIFY_PEER) is not affected; only applications doing manual or deferred verification through this API are.

An integer overflow existed in the wolfCrypt CMAC implementation, that could be exploited to forge CMAC tags. The function wc_CmacUpdate used the guard `if (cmac->totalSz != 0)` to skip XOR-chaining on the first block (where digest is all-zeros and the XOR is a no-op). However, totalSz is word32 and wraps to zero after 2^28 block flushes (4 GiB), causing the guard to erroneously discard the live CBC-MAC chain state. Any two messages sharing a common suffix beyond the 4 GiB mark then produce identical CMAC tags, enabling a zero-work prefix-substitution forgery. The fix removes the guard, making the XOR unconditional; the no-op property on the first block is preserved because digest is zero-initialized by wc_InitCmac_ex.

wolfSSL_X509_verify_cert in the OpenSSL compatibility layer accepts a certificate chain in which the leaf's signature is not checked, if the attacker supplies an untrusted intermediate with Basic Constraints `CA:FALSE` that is legitimately signed by a trusted root. An attacker who obtains any leaf certificate from a trusted CA (e.g. a free DV cert from Let's Encrypt) can forge a certificate for any subject name with any public key and arbitrary signature bytes, and the function returns `WOLFSSL_SUCCESS` / `X509_V_OK`. The native wolfSSL TLS handshake path (`ProcessPeerCerts`) is not susceptible and the issue is limited to applications using the OpenSSL compatibility API directly, which would include integrations of wolfSSL into nginx and haproxy.

In wolfSSL's EVP layer, the ChaCha20-Poly1305 AEAD decryption path in wolfSSL_EVP_CipherFinal (and related EVP cipher finalization functions) fails to verify the authentication tag before returning plaintext to the caller. When an application uses the EVP API to perform ChaCha20-Poly1305 decryption, the implementation computes or accepts the tag but does not compare it against the expected value.

wolfSSL's ECCSI signature verifier `wc_VerifyEccsiHash` decodes the `r` and `s` scalars from the signature blob via `mp_read_unsigned_bin` with no check that they lie in `[1, q-1]`. A crafted forged signature could verify against any message for any identity, using only publicly-known constants.

An integer underflow issue exists in wolfSSL when parsing the Subject Alternative Name (SAN) extension of X.509 certificates. A malformed certificate can specify an entry length larger than the enclosing sequence, causing the internal length counter to wrap during parsing. This results in incorrect handling of certificate data. The issue is limited to configurations using the original ASN.1 parsing implementation which is off by default.