Vulnerabilidades de Freebsd

dsp_mmap_single() validated the requested mapping by checking the sum of the user-supplied offset and length against the buffer size. This addition could overflow, so that a large offset and length wrapped around and passed the check. The offset was then narrowed from 64 to 32 bits when converted to a buffer address, yielding a mapping that extended past the audio buffer into unrelated kernel memory. The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS).

The KTLS receive path decrypted each record in place, assuming that the mbufs holding received data were anonymous and safe to modify. This assumption does not hold for data placed on a socket by sendfile(2), which can reference file-backed memory directly through non-anonymous M_EXTPG pages or EXT_SFBUF mbufs. When the sender transmits such data over a loopback connection without enabling KTLS on the transmit side, the file-backed mbufs reach the receiver's decryption path unchanged. Decrypting a record in place then overwrites the backing file's page cache instead of a private copy of the data. An unprivileged local user who can read a file can overwrite its contents with data of their choosing by sending the file over a loopback connection on which they have enabled KTLS receive. The write modifies the page cache directly, so it bypasses file flags such as schg and is written back to disk. By overwriting a setuid binary or other trusted file, a local user can escalate privileges, potentially gaining full control of the affected system.

When bsdinstall or bsdconfig are prompted to scan for nearby Wi-Fi networks, they build up a list of network names and use bsddialog(1) to prompt the user to select a network. This is implemented using a shell script, and the code which handled network names was not careful to prevent expansion by the shell. As a result, a suitably crafted network name can be used to execute commands via a subshell. The problem can be exploited to execute code as root on the system running bsdinstall or bsdconfig. The attacker would need to create an access point with a specially crafted name and be within range of a Wi-Fi scan. Note that bsdinstall and bsdconfig are vulnerable as soon as the user prompts them to scan for nearby networks; they do not need to actually select the malicious network.

ptrace(PT_SC_REMOTE) failed to properly validate parameters for the syscall(2) and __syscall(2) meta-system calls. As a result, a user with the ability to debug a process may trigger arbitrary code execution in the kernel, even if the target process has no special privileges. The missing validation allows an unprivileged local user to escalate privileges, potentially gaining full control of the affected system.

A file descriptor can be closed while a thread is blocked in a poll(2) or select(2) call waiting for that descriptor. Because the blocked thread does not hold a reference to the underlying object, this closure may result in the object being freed while the thread remains blocked. In this situation, the kernel must remove the blocked thread from the per-object wait queue prior to freeing the object. In the case of some file descriptor types, the kernel failed to unlink blocked threads from the object before freeing it. When the blocked thread is subsequently woken, it accesses memory that has already been freed resulting in a use-after-free vulnerability. The use-after-free vulnerability may be triggered by an unprivileged local user and can be exploited to obtain superuser privileges.

libcasper(3) communicates with helper processes via UNIX domain sockets, and uses the select(2) system call to wait for data to become available. However, it does not verify that its socket descriptor fits within select(2)'s descriptor set size limit of FD_SETSIZE (1024). An attacker able to cause an application using libcasper(3) to allocate large file descriptors, e.g., by opening many descriptors and executing a program which is not careful to close them upon startup, may trigger stack corruption. If the target application runs with setuid root privileges, this could be used to escalate local privileges.

The setcred(2) system call is only available to privileged users. However, before the privilege level of the caller is checked, the user-supplied list of supplementary groups is copied into a fixed-size kernel stack buffer without first validating its length. If the supplied list exceeds the capacity of that buffer, a stack buffer overflow occurs. Because the bounds check on the supplementary groups list occurs after the kernel stack buffer has already been written, an unprivileged local user may trigger the overflow without holding any special privilege. Successful exploitation may allow an attacker to execute arbitrary code in the context of the kernel, allowing an unprivileged local user to gain elevated privileges on the affected system.

As dhclient is building an environment to pass to dhclient-script, it may need to resize the array of string pointers. The code which expands the array incorrectly calculates its new size when requesting memory, resulting in a heap buffer overrun. A specially crafted packet can cause dhclient to overrun its buffer of environment entries. This can result in a crash, but it may be possible to leverage this bug to achieve remote code execution.

When exchanging data over a socket, libnv uses select(2) to wait for data to arrive. However, it does not verify whether the provided socket descriptor fits in select(2)'s file descriptor set size limit of FD_SETSIZE (1024). An attacker who is able to force a libnv application to allocate large file descriptors, e.g., by opening many descriptors and executing a program which is not careful to close them upon startup, can trigger stack corruption. If the target application is setuid-root, then this could be used to elevate local privileges.

When processing the header of an incoming message, libnv failed to properly validate the message size. The lack of validation allows a malicious program to write outside the bounds of a heap allocation. This can trigger a crash or system panic, and it may be possible for an unprivileged user to exploit the bug to elevate their privileges.

Incorrect packet validation allowed unbounded recursion parsing SCTP chunk parameters. This can eventually result in a stack overflow and panic. Remote attackers can craft packets which cause affected systems to panic. This affects any system where pf is configured to process traffic, independent of the configured ruleset.

An operator precedence bug in the kernel results in a scenario where a buffer overflow causes attacker-controlled data to overwrite adjacent execve(2) argument buffers. The bug may be exploitable by an unprivileged user to obtain superuser privileges.

The BOOTP file field is written to the lease file without escaping embedded double-quotes, allowing injection of arbitrary dhclient.conf directives. When the lease file is subsequently re-parsed by dhclient, e.g., after a system restart, an attacker-controlled field from the lease is passed to dhclient-script(8), which evaluates it. A rogue DHCP server may be able to execute arbirary code as root on a system running dhclient.

The implementation of TIOCNOTTY failed to clear a back-pointer from the structure representing the controlling terminal to the calling process' session. If the invoking process then exits, the terminal structure may end up containing a pointer to freed memory. A malicious process can abuse the dangling pointer to grant itself root privileges.

A regression in the way hashes were calculated caused rules containing the address range syntax (x.x.x.x - y.y.y.y) that only differ in the address range(s) involved to be silently dropped as duplicates. Only the first of such rules is actually loaded into pf. Ranges expressed using the address[/mask-bits] syntax were not affected. Some keywords representing actions taken on a packet-matching rule, such as 'log', 'return tll', or 'dnpipe', may suffer from the same issue. It is unlikely that users have such configurations, as these rules would always be redundant. Affected rules are silently ignored, which can lead to unexpected behaviour including over- and underblocking.

Each RPCSEC_GSS data packet is validated by a routine which checks a signature in the packet. This routine copies a portion of the packet into a stack buffer, but fails to ensure that the buffer is sufficiently large, and a malicious client can trigger a stack overflow. Notably, this does not require the client to authenticate itself first. As kgssapi.ko's RPCSEC_GSS implementation is vulnerable, remote code execution in the kernel is possible by an authenticated user that is able to send packets to the kernel's NFS server while kgssapi.ko is loaded into the kernel. In userspace, applications which have librpcgss_sec loaded and run an RPC server are vulnerable to remote code execution from any client able to send it packets. We are not aware of any such applications in the FreeBSD base system.

On a system exposing an NVMe/TCP target, a remote client can trigger a kernel panic by sending a CONNECT command for an I/O queue with a bogus or stale CNTLID. An attacker with network access to the NVMe/TCP target can trigger an unauthenticated Denial of Service condition on the affected machine.

When a challenge ACK is to be sent tcp_respond() constructs and sends the challenge ACK and consumes the mbuf that is passed in. When no challenge ACK should be sent the function returns and leaks the mbuf. If an attacker is either on path with an established TCP connection, or can themselves establish a TCP connection, to an affected FreeBSD machine, they can easily craft and send packets which meet the challenge ACK criteria and cause the FreeBSD host to leak an mbuf for each crafted packet in excess of the configured rate limit settings i.e. with default settings, crafted packets in excess of the first 5 sent within a 1s period will leak an mbuf. Technically, off-path attackers can also exploit this problem by guessing the IP addresses, TCP port numbers and in some cases the sequence numbers of established connections and spoofing packets towards a FreeBSD machine, but this is harder to do effectively.

The rtsock_msg_buffer() function serializes routing information into a buffer. As a part of this, it copies sockaddr structures into a sockaddr_storage structure on the stack. It assumes that the source sockaddr length field had already been validated, but this is not necessarily the case, and it's possible for a malicious userspace program to craft a request which triggers a 127-byte overflow. In practice, this overflow immediately overwrites the canary for the rtsock_msg_buffer() stack frame, resulting in a panic once the function returns. The bug allows an unprivileged user to crash the kernel by triggering a stack buffer overflow in rtsock_msg_buffer(). In particular, the overflow will corrupt a stack canary value that is verified when the function returns; this mitigates the impact of the stack overflow by triggering a kernel panic. Other kernel bugs may exist which allow userspace to find the canary value and thus defeat the mitigation, at which point local privilege escalation may be possible.

Due to a programming error, blocklistd leaks a socket descriptor for each adverse event report it receives. Once a certain number of leaked sockets is reached, blocklistd becomes unable to run the helper script: a child process is forked, but this child dereferences a null pointer and crashes before it is able to exec the helper. At this point, blocklistd still records adverse events but is unable to block new addresses or unblock addresses whose database entries have expired. Once a second, much higher number of leaked sockets is reached, blocklistd becomes unable to receive new adverse event reports. An attacker may take advantage of this by triggering a large number of adverse events from sacrificial IP addresses to effectively disable blocklistd before launching an attack. Even in the absence of attacks or probes by would-be attackers, adverse events will occur regularly in the course of normal operations, and blocklistd will gradually run out file descriptors and become ineffective. The accumulation of open sockets may have knock-on effects on other parts of the system, resulting in a general slowdown until blocklistd is restarted.