Vulnerabilidades de Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: validate LE Set CIG Parameters response The Command Complete dispatch validates only the fixed part of the LE Set CIG Parameters response. After that part is pulled from the skb, hci_cc_le_set_cig_params() trusts num_handles and reads each entry in the trailing handle array. Matching num_handles against the command's num_cis does not guarantee that the response contains the advertised handles. A truncated response from a malfunctioning controller can therefore make the handler read beyond the skb data. Validate that the remaining skb data contains all advertised handles. Include this in the existing response validation so malformed responses also follow the established CIG failure handling.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix accept list UAF during suspend hci_update_event_filter_sync() walks hdev->accept_list while sending a synchronous HCI command for each remote-wakeup device. The suspend path holds hdev->req_lock, but accept-list updates are serialized by hdev->lock. Consequently, remove_device() can free the current list entry during the controller wait. The following interleaving causes the use-after-free: hci_update_event_filter_sync() remove_device() fetch accept-list entry hci_set_event_filter_sync() wait for controller response hci_dev_lock() list_del() kfree() hci_dev_unlock() read the freed list.next KASAN reported: BUG: KASAN: slab-use-after-free in hci_suspend_sync+0x835/0x910 Read of size 8 at addr ffff88810bec8440 by task kworker/0:1/10 Workqueue: events vhci_suspend_work Call Trace: hci_suspend_sync+0x835/0x910 hci_suspend_dev+0x182/0x450 process_one_work+0x661/0x1090 worker_thread+0x45b/0xd10 Allocated by task 86: hci_bdaddr_list_add_with_flags+0x1a8/0x400 add_device+0x381/0x820 hci_sock_sendmsg+0x1033/0x1ea0 Freed by task 91: kfree+0x131/0x3c0 remove_device+0x429/0xb70 hci_sock_sendmsg+0x1033/0x1ea0 Snapshot the remote-wakeup addresses under hdev->lock. Release the lock before sending HCI commands. Clear the controller event filter before building the snapshot, and skip allocation and the second list traversal when there are no matching entries. This preserves the original filter and scan-state updates without retaining an accept-list node across a controller wait.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: zero the sockaddr before returning it in getname iso_sock_getname() fills a struct sockaddr_iso in place and returns its size without clearing it first, so bytes it does not write are copied to user space from the kernel stack. The getsockname(2) and getpeername(2) paths both run through do_getsockname(), which hands getname() an uninitialized sockaddr_storage on the stack and copies back up to the number of bytes getname() returns, so the driver has to initialize every byte it accounts for. Two ranges are left uninitialized: - struct sockaddr_iso is 10 bytes but only 9 are written (family, iso_bdaddr, iso_bdaddr_type), leaking the trailing pad byte on every call. - for a broadcast peer (BIS_LINK or PA_LINK) the returned length grows by sizeof(struct sockaddr_iso_bc), but only bc_sid, bc_num_bis and bc_bis are filled; bc_bdaddr and bc_bdaddr_type, the first 7 bytes of that structure, are never written. An unprivileged process can open a BTPROTO_ISO socket and reach the pad leak with getsockname(); the broadcast leak needs an established BIS/PA connection. l2cap and rfcomm already memset their sockaddr in getname for the same reason; do the same here.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: reject HCI_CMD_SYNC params_len above 255 mgmt_hci_cmd_sync() checks that the message length agrees with params_len but puts no upper bound on it. params_len is __le16 while the parameter length in the HCI command header is a u8: struct hci_command_hdr { __le16 opcode; __u8 plen; } __packed; hci_cmd_sync_alloc() assigns one to the other: hdr->plen = plen; if (plen) skb_put_data(skb, param, plen); so a params_len of 256 leaves plen at 0 while all 256 bytes are still appended. The frame handed to the driver then declares no parameters and carries 256 of them. On a length framed transport such as H:4 the controller takes the trailing bytes as the start of the next packet. The mgmt socket MTU is HCI_MAX_FRAME_SIZE, so params_len can reach about 1KB this way. Commit 03f1700b9b4d ("Bluetooth: MGMT: reject malformed HCI_CMD_SYNC commands") only made params_len agree with the message length, a value that fits the message but not the header field is still accepted. Reject params_len that does not fit the header field.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_aml: validate firmware segment lengths aml_download_firmware() reads two lengths from the firmware header and uses them to build pointers before checking that the header and segment data are present. A truncated or inconsistent firmware image can make the driver read past firmware->data while constructing TCI commands. Reject images shorter than the header and ensure that the ICCM and DCCM ranges fit within the loaded firmware before downloading either segment.

In the Linux kernel, the following vulnerability has been resolved: futex: Avoid private hash use-after-free on final put futex_private_hash_put() drops the reference to fph before evaluating fph->mm for wake_up_var(). futex_ref_put() enables preemption again before returning. If that put drops the final reference and the task is preempted, another task can pivot to the replacement hash and free the old hash after an RCU grace period. The first task then reads fph->mm from the freed allocation when it resumes. KASAN reports a slab-use-after-free in futex_private_hash_put(), with the read at offset 24 in a freed kmalloc-512 allocation. The allocation and free stacks point to futex_hash_allocate() and the RCU free path, respectively. Load the mm pointer while the fph reference is still held and pass the saved value to wake_up_var(). wake_up_var() uses the pointer as a waitqueue key and does not dereference the mm through it.

In the Linux kernel, the following vulnerability has been resolved: selinux: reject a class permission count below its inherited common security_get_permissions() maps an inherited common's permissions into an array sized by the class's own permissions.nprim, but class_read() takes that nprim verbatim from the policy image and never checks that it covers the common. A class that inherits a common of N permissions while declaring a smaller nprim is accepted, and on load the common's permissions are written past the class-sized array -- an out-of-bounds heap write. Reject a class whose permission count is below its inherited common's. Well-formed policies, where the class count already includes the inherited permissions, are unaffected.

In the Linux kernel, the following vulnerability has been resolved: selinux: do not cancel a policy conversion that never started sel_write_load() calls selinux_policy_cancel() when sel_make_policy_nodes() fails, and that helper dereferences the outgoing policy to cancel its sidtab conversion. On the first policy load there is no outgoing policy: security_load_policy() returns early for that case, before it converts anything, and state->policy is still NULL. A first load that fails while building the selinuxfs tree therefore takes a NULL dereference in selinux_policy_cancel(), reached from a write(2) to /sys/fs/selinux/load. Skip the cancel when there is no old policy, mirroring the check security_load_policy() already makes before it converts.

In the Linux kernel, the following vulnerability has been resolved: selinux: reject a permission value exceeding the class permission count perm_read() bounds a permission value by SEL_VEC_MAX but never by the nprim of the owning class or common, which is taken verbatim from the policy image. security_get_permissions() then writes perms[value - 1] into an nprim-sized kcalloc() array, so a class declaring fewer permissions than its largest permission value drives an out-of-bounds heap write. The top-level symbol tables are validated this way; the nested per-class permission table is not. Reject a permission whose value exceeds nprim, which is already set when perm_read() runs. Well-formed policies are unaffected. [PM: tweak comment for line length]

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: dispcc-eliza: Fix disp_cc_mdss_mdp_clk_src RCG stall on Eliza EVK Eliza EVK (eliza-cqs-evk.dts) does not have display enabled, however its Display Clock Controller is enabled and references parent clocks from DSI PHYs, which causes clock reparenting issues during probe (init) and warning on Eliza EVK: disp_cc_mdss_mdp_clk_src: rcg didn't update its configuration. WARNING: drivers/clk/qcom/clk-rcg2.c:136 at update_config+0xd4/0xe4, CPU#1: udevd/273 ... update_config (drivers/clk/qcom/clk-rcg2.c:136 (discriminator 2)) (P) clk_rcg2_shared_disable (drivers/clk/qcom/clk-rcg2.c:1471) clk_rcg2_shared_init (drivers/clk/qcom/clk-rcg2.c:1540) __clk_register (drivers/clk/clk.c:3959 drivers/clk/clk.c:4368) devm_clk_hw_register (drivers/clk/clk.c:4448 (discriminator 1) drivers/clk/clk.c:4672 (discriminator 1)) devm_clk_register_regmap (drivers/clk/qcom/clk-regmap.c:104) qcom_cc_really_probe (drivers/clk/qcom/common.c:418) qcom_cc_probe (drivers/clk/qcom/common.c:445) disp_cc_eliza_probe (dispcc-eliza.c:?) dispcc_eliza platform_probe (drivers/base/platform.c:1432)

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables_offload: suppress WARN_ON_ONCE for ENOMEM in abort path In nft_flow_rule_offload_abort(), WARN_ON_ONCE(err) is triggered on every error during rollback, including -ENOMEM. Memory allocation failures are expected under low-memory conditions and do not indicate a kernel bug. Trace for example: nft_flow_offload_chain() // FLOW_BLOCK_BIND nft_flow_block_chain() nft_chain_offload_cmd() nft_block_offload_cmd() ->ndo_setup_tc() nsim_setup_tc() flow_block_cb_setup_simple() flow_block_cb_alloc() // fails to -ENOMEM The warning was reproduced on the 5.10 stable kernel under memory pressure via fault injection, but the underlying bug exists in mainline as well, as demonstrated by the ENOMEM trace above. The following splat was triggered during nf_tables transaction processing: WARNING: CPU: 0 PID: 8567 at net/netfilter/nf_tables_offload.c:532 nft_flow_rule_offload_abort net/netfilter/nf_tables_offload.c:532 [inline] WARNING: CPU: 0 PID: 8567 at net/netfilter/nf_tables_offload.c:532 nft_flow_rule_offload_commit+0x971/0xcd0 net/netfilter/nf_tables_offload.c:591 Modules linked in: CPU: 0 PID: 8567 Comm: syz-executor.0 Not tainted 5.10.260-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:nft_flow_rule_offload_abort net/netfilter/nf_tables_offload.c:532 [inline] RIP: 0010:nft_flow_rule_offload_commit+0x971/0xcd0 net/netfilter/nf_tables_offload.c:591 Call Trace: nf_tables_commit+0x3bd/0x4bd0 net/netfilter/nf_tables_api.c:8604 nfnetlink_rcv_batch+0xb1e/0x1f20 net/netfilter/nfnetlink.c:509 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:579 [inline] nfnetlink_rcv+0x3b3/0x420 net/netfilter/nfnetlink.c:597 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x6cd/0xa00 net/netfilter/af_netlink.c:1340 netlink_sendmsg+0x906/0xe10 net/netfilter/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:651 [inline] __sock_sendmsg+0x155/0x190 net/socket.c:663 ____sys_sendmsg+0x705/0x870 net/socket.c:2379 ___sys_sendmsg+0x100/0x170 net/socket.c:2433 __sys_sendmsg+0xe9/0x1c0 net/socket.c:2462 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Change the condition to WARN_ON_ONCE(err && err != -ENOMEM) so that warnings are only emitted for unexpected errors. This aligns with the common kernel practice of not warning on -ENOMEM. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: ASoC: xilinx: formatter_pcm: pass aud_drv_data to irq handlers The irq handlers take a struct device pointer and call dev_get_drvdata() to obtain the driver data. However, the driver data is only set at the end of probe, after devm_request_irq(), so an interrupt taken in between causes the handlers to pass a NULL pointer to readl() and crash. Pass the private data directly as the devm_request_irq() argument instead of the device pointer, matching what the handlers expect.

In the Linux kernel, the following vulnerability has been resolved: af_packet: Don't send zero-byte data in tpacket_snd(). syzbot reported a WARNING in __dev_queue_xmit() triggered via tpacket_snd(): skb_assert_len WARNING: at include/linux/skbuff.h:2753 skb_assert_len WARNING: at __dev_queue_xmit+0x21bc/0x4970 net/core/dev.c:4781 Call Trace: <TASK> dev_queue_xmit include/linux/netdevice.h:3448 [inline] packet_xmit+0x243/0x310 net/packet/af_packet.c:276 tpacket_snd net/packet/af_packet.c:2907 [inline] packet_sendmsg+0x28d6/0x4eb0 net/packet/af_packet.c:3134 When sending 0-byte packets via TPACKET ring buffer on devices with no hard header (e.g. dev->hard_header_len == 0), tpacket_fill_skb() populates an skb with skb->len == 0 and returns 0. tpacket_snd() then forwards this empty skb to packet_xmit(), causing __dev_queue_xmit() to hit skb_assert_len(skb). Similar checks exist in packet_snd() via commit dc633700f00f ("net/af_packet: check len when min_header_len equals to 0") and in packet_sendmsg_spkt() via commit 6a341729fb31 ("af_packet: Don't send zero-byte data in packet_sendmsg_spkt()."). Return -EINVAL in tpacket_fill_skb() when skb->len is zero to reject zero-length packets in tpacket_snd().

In the Linux kernel, the following vulnerability has been resolved: drm/log: Fix infinite loop when scale is too large for display When scale is large enough that scaled_font exceeds the display dimensions, rows or columns become 0. A columns value of 0 causes an infinite loop in drm_log_draw_kmsg_record() because the loop never decrements len. Check for zero rows/columns in drm_log_setup_modeset() and return an error, cleaning up the already allocated buffer to avoid a leak.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: TC, Check if flow is PEER before acquiring devcom lock In case __mlx5e_add_fdb_flow() fails in lower levels, the flow is deleted via mlx5e_tc_del_flow(), and mlx5e_tc_del_flow() is acquiring ESW devcom lock without condition. In addition, in case of peer_flow, __mlx5e_add_fdb_flow() is called while holding ESW devcom comp lock. This results in an AA deadlock. To fix this, introduce a new PEER flag that is set on flows created as peer flows (the duplicate flows on peer devices), and check it in mlx5e_tc_del_flow() before acquiring ESW devcom lock. Lockdep splat: ============================================ WARNING: possible recursive locking detected ============================================ Possible unsafe locking scenario: CPU0 ---- lock(&comp->lock_key#2); lock(&comp->lock_key#2); *** DEADLOCK *** Call Trace: <TASK> dump_stack_lvl+0x69/0xa0 print_deadlock_bug.cold+0xbd/0xca __lock_acquire+0x1671/0x2ec0 lock_acquire+0x10e/0x2e0 down_read+0x95/0x430 mlx5_devcom_for_each_peer_begin+0x4e/0xe0 [mlx5_core] mlx5e_tc_del_flow+0x11d/0xa70 [mlx5_core] mlx5e_flow_put+0x99/0x100 [mlx5_core] __mlx5e_add_fdb_flow+0x409/0xf00 [mlx5_core] mlx5e_configure_flower+0x2a86/0x4100 [mlx5_core] mlx5e_rep_setup_tc_cls_flower+0x12f/0x1b0 [mlx5_core] mlx5e_rep_setup_tc_cb+0x153/0x750 [mlx5_core] tc_setup_cb_add+0x1dc/0x470 fl_change+0x2f4d/0x626d [cls_flower] tc_new_tfilter+0x79b/0x2310 rtnetlink_rcv_msg+0x778/0xad0 do_syscall_64+0x70/0x960 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK>