Vulnerabilidades de Linux

In the Linux kernel, the following vulnerability has been resolved: smb/client: validate new EOF for zero range When FALLOC_FL_ZERO_RANGE is used without FALLOC_FL_KEEP_SIZE, smb3_zero_range() may extend EOF without checking RLIMIT_FSIZE, allowing the file to grow beyond the caller's file-size limit. Fix this by calling inode_newsize_ok() before sending the zero-range request when the operation would extend EOF. Reproducer, using a file on a CIFS mount: bash -c ' FILE=/mnt/cifs/repro trap "" SIGXFSZ ulimit -f 3072 truncate -s 2M "$FILE" fallocate --zero-range -o 0 -l 4M "$FILE" echo "fallocate rc=$?" stat -c "file size=%s" "$FILE" ' Before this change, the operation succeeds despite the 3 MiB limit: fallocate rc=0 file size=4194304 After this change, fallocate fails and leaves the file at 2 MiB.

In the Linux kernel, the following vulnerability has been resolved: smb/client: fix stale page cache in insert/collapse range smb3_insert_range() and smb3_collapse_range() use truncate_pagecache_range() to invalidate the affected page cache. However, if off or old_eof is not page-aligned, the boundary pages are only partially zeroed and remain uptodate. As a result, the client may return stale data after a successful insert/collapse range operation. For example, with 4K pages: page 0 page 1 page 2 0------4K 4K------8K 8K------12K ^ ^ off=2K old_eof=10K Page 1 is removed from the page cache, while the boundary pages are only partially zeroed. After COPYCHUNK moves the data on the server, these cached pages may still return stale data. This can be reproduced on a CIFS mount: bash -c ' FILE=/mnt/scratch/repro # Use a 6 KiB file so EOF is not page-aligned. dd if=/dev/urandom of=/tmp/src bs=1K count=6 status=none # Expected: a 4 KiB hole followed by the original data. rm -f /tmp/expected truncate -s 4K /tmp/expected cat /tmp/src >> /tmp/expected cp /tmp/src "$FILE" # Prime the page cache before moving data on the server. cat "$FILE" > /dev/null fallocate --insert-range -o 0 -l 4K "$FILE" if cmp -s /tmp/expected "$FILE"; then echo "readback: OK" else echo "readback: STALE DATA" fi ' Fix this by writing back dirty data and discarding the page cache from the start of the page containing off to EOF before moving data on the server.

In the Linux kernel, the following vulnerability has been resolved: smb/client: invalidate fscache for fallocate range operations smb3_zero_range(), smb3_punch_hole(), smb3_insert_range(), and smb3_collapse_range() modify file contents through server-side range operations. These operations discard the affected page cache, but leave the FS-Cache cookie valid, so a later read may return data cached before the range operation. Fix this by invalidating FS-Cache after outstanding I/O has completed and before modifying the file on the server. Run the following as root on a CIFS mount with fsc enabled and an active CacheFiles backend: bash -c ' MNT=/mnt/cifs FILE="$MNT/repro" # Generate four 1 MiB random blocks: [A][B][C][D]. dd if=/dev/urandom of=/tmp/src bs=1M count=4 status=none # Expected contents after zeroing B: [A][zero][C][D]. cp /tmp/src /tmp/expected dd if=/dev/zero of=/tmp/expected bs=1M seek=1 count=1 \ conv=notrunc status=none cp /tmp/src "$FILE" # Populate FS-Cache, then discard the page cache. sync echo 1 > /proc/sys/vm/drop_caches cat "$FILE" > /dev/null sync echo 1 > /proc/sys/vm/drop_caches fallocate --zero-range -o 1M -l 1M "$FILE" if cmp -s /tmp/expected "$FILE"; then echo "readback: OK" else echo "readback: STALE DATA" fi ' Before this change, the readback differs from /tmp/expected: readback: STALE DATA After this change, it matches: readback: OK

In the Linux kernel, the following vulnerability has been resolved: sctp: fix soft lockup from unpadded ASCONF-ACK parameter iteration sctp_verify_asconf() walks ASCONF-ACK parameters with sctp_walk_params(), which advances by SCTP_PAD4(length), while the consumer sctp_get_asconf_response() iterates the same parameters advancing by the raw length, without padding. A single odd-length parameter desynchronises the two walks and makes the consumer interpret attacker-controlled bytes at a misaligned offset. When those bytes yield a length of zero, the while loop over asconf_ack_len makes no progress, spinning forever in softirq context, and the watchdog reports a soft lockup. All reads stay within the received skb, so the lockup is a pure remote denial of service. A remote peer can trigger it with a crafted ASCONF-ACK on an ADD-IP enabled association with an outstanding ASCONF (RFC 5061 section 4.1.2 requires the chunk to be authenticated, but the predefined empty key id 0 allows the peer to compute the same association HMAC from publicly exchanged parameters, so the gate does not help). The SCTP_PARAM_ERR_CAUSE case of sctp_verify_asconf() also performs no length check, letting a parameter without a complete error header reach the consumer, which reads errhdr.cause past the end of the parameter, an out-of-bounds read. Reject SCTP_PARAM_ERR_CAUSE parameters shorter than sizeof(struct sctp_addip_param) + sizeof(struct sctp_errhdr) at the verifier, and advance the consumer iterator with the same padding rule as the verifier to keep the two walks in lockstep. The verifier change guarantees a complete error header in every ERR_CAUSE parameter the consumer can see, so the consumer's asconf_ack_len check is dropped and it returns err_param->cause directly. The consumer padding fix is still required because odd lengths remain valid for SCTP_PARAM_ERR_CAUSE per RFC 5061. The issue was found by ZeroHive, a vulnerability hunting agent at Tencent Yunding Lab.

In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Fix NULL pointer dereference in PM callbacks msc313e_wdt_probe() doesn't set the driver data for the platform device. As a result, dev_get_drvdata() in msc313e_wdt_suspend() and msc313e_wdt_resume() will return NULL, leading to a NULL pointer dereference afterward. Set the platform device driver data in msc313e_wdt_probe().

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix subreq ref leak Fix a subrequest ref leak in netfs_unbuffered_write() in the event that subreq->io_iter ends up zero length during preparation.

In the Linux kernel, the following vulnerability has been resolved: netfs: break unbuffered write when netfs_alloc_subrequest() fails syzbot reported a null-ptr-deref below [1] following a fault injection in netfs_alloc_subrequest(). [0] When netfs_alloc_subrequest() fails, subreq is NULL. Later, netfs_prepare_write() tries to initialize members of subreq(e.g., source), the issue in [1] is triggered. Let's handle the error of netfs_prepare_write() properly. [0] FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 Call Trace: netfs_alloc_subrequest+0x116/0x3f0 netfs_prepare_write+0x76/0x7b0 netfs_unbuffered_write+0x75c/0x2020 netfs_unbuffered_write_iter_locked+0x7d6/0xa80 netfs_unbuffered_write_iter+0x442/0x720 v9fs_file_write_iter+0xbf/0x100 vfs_write+0x6ac/0x1050 [1] KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af] RIP: 0010:netfs_prepare_write+0xbc/0x7b0 fs/netfs/write_issue.c:173 Call Trace: netfs_unbuffered_write+0x75c/0x2020 fs/netfs/direct_write.c:111 netfs_unbuffered_write_iter_locked+0x7d6/0xa80 fs/netfs/direct_write.c:290 netfs_unbuffered_write_iter+0x442/0x720 fs/netfs/direct_write.c:382 v9fs_file_write_iter+0xbf/0x100 fs/9p/vfs_file.c:409 new_sync_write fs/read_write.c:595 [inline]

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix readahead synchronisation issues by loading all folios upfront There are some synchronisation issues that derive from the app thread adding more folios to the rolling buffer whilst the collector thread is looking at them or trying to clear them, such as determining the setting of front_folio_order when the next folio hasn't been added yet, The reason for the rolling buffer approach is that loading the buffer upfront and then dropping all the refs just acquired is quite a slow operation, and loading progressively allows some of the cost to be deferred until after at least some of the I/O is started. Instead, a better way is to load all the folios into the rolling buffer upfront - and then drop the refs later, once the I/O is in progress. (Even better would be for the refs not to be there at all.) Fix this by changing the rolling buffer loader to load all the folios selected by the VM for readahead upfront into the folio queue. The folio queue is allocated a batch worth at a time as we don't know how many folios are involved (the readahead_control struct, alas, has a page count, not a folio count). The folio refs acquired from readahead are then dropped in bulk once the first subrequest is dispatched as it's quite a slow operation. The collector waits for NETFS_RREQ_NEED_PUT_RA_REFS to be cleared so that it doesn't unlock folios before the xarray has been scanned for them. This simplifies the buffer handling later and isn't noticeably slower as the xarray doesn't need to be modified and the folios are all already pre-locked.

In the Linux kernel, the following vulnerability has been resolved: cachefiles: Fix potential UAF/KASAN warning Currently, trace_cachefiles_coherency() is being passed a pointer to a __be64 lain over the coherency data in struct cachefiles_xattr so that it can display the first 8 bytes. However, the data is of variable length and could even be 0 bytes. This could lead to a UAF or KASAN warning. Fix this by making sure the buffer has room for at least 8 bytes and that those 8 bytes are pre-cleared. Further, those bytes are not 8-byte aligned, so fix the tracepoint to extract the data as four 2-byte words (they are 2-byte aligned) and reassemble the __be64. The compiler will convert this into a single 8-byte load where the CPU supports it.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: propagate DACL parsing errors parse_dacl() silently accepts truncated ACEs and allocation failures, allowing set_info_sec() to continue with an incomplete ACL conversion. Return parsing and allocation errors to parse_sec_desc() so malformed security descriptors are rejected before inode attributes or ACL xattrs are updated.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: rate limit unmapped SID errors A client can include many structurally valid but unmapped SIDs in a DACL. Logging every mapping failure lets one request generate hundreds of kernel error messages. Rate limit the message to prevent an authenticated client from flooding the kernel log.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: validate version TLV value lengths btintel_parse_version_tlv() verifies that a complete TLV is present in the response, but it does not ensure that the value is long enough for the specific TLV type. A short value can therefore cause an out-of-bounds read through get_unaligned_le16(), get_unaligned_le32(), or memcpy(). Reject values shorter than the minimum required by each known TLV type. Also reject responses that do not contain the Command Complete Status field.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: bound firmware ID by TLV length The firmware ID is treated as a NUL-terminated string even though the TLV length is its only boundary. If the value does not contain a NUL terminator, snprintf() can read beyond the received response. Limit the conversion to the advertised TLV value length.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix out-of-bounds write in l2cap_ecred_connect l2cap_chan_connect() tries to ensure there are no more than L2CAP_ECRED_CONN_SCID_MAX pending ECRED channels, so they fit in the same L2CAP_ECRED_CONN_REQ that l2cap_ecred_connect() constructs. However, the check only counts deferred channels. If 6 L2CAP sockets are connected at the same time in order DDDDND (D=deferred, N=non-deferred), the last can bump the total to max+1. It results to one __le16 written out of bounds of the scid array, and an invalid ECRED_CONN_REQ being sent. Fix by leaving room for the non-deferred pending ECRED channels in the counting in l2cap_chan_connect(), so the limit can't be exceeded. Move counting under same critical section where the channel is added. Although race conditions involving this appear unreachable, it's easier to see. Also add WARN_ON_ONCE check in l2cap_ecred_defer_connect() to make this less brittle.

In the Linux kernel, the following vulnerability has been resolved: drm/pagemap: Prevent double migration of device pages A device-private folio migrated to system memory by a CPU fault can remain reachable through the raw-PFN eviction path until migration finalization drops the source reference. If eviction selects the same device-private folio during this window, it can attempt to migrate the folio again. The second migration can leave an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to retry indefinitely and resulting in a soft lockup and RCU stall. Mark successfully migrated device-private folios using a low bit of their zone_device_data before migration finalization. Make both CPU-fault and raw-PFN migration paths skip device-private folios carrying this flag. Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve it when a device-private folio is split. Keeping the state on the physical folio also avoids depending on a virtual address that may change before a fault occurs. v2: - Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost) - Mark every base page covered by a migrated folio so retirement remains valid if the folio is later split. v3: - Store the migrated state in a low bit of zone_device_data instead of adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost) - Mask the flag when retrieving the ZDD and preserve it when splitting a folio. - Drop the pre-existing fixes already covered by Matthew Brost's series: https://patchwork.freedesktop.org/series/171651/ v4: - Advance by the folio size only for migration entries marked with MIGRATE_PFN_COMPOUND. (Sashiko) v5: - Simplify ZDD flag updates and folio iteration. (Matthew Brost) - Skip retired device-private folios in the CPU-fault path. (Matthew Brost) - Preserve flag bits while taking a new ZDD reference for split folios. v6: - Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration entries are processed one at a time. (Sashiko) - Drop the pre-existing fixes already covered by Matthew Brost's series: https://patchwork.freedesktop.org/series/171651/ The lockup was observed as: [10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557] [10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE [10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023 [10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe] [10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80 [10109.860655] Call Trace: [10109.860655] <TASK> [10109.860657] folio_lruvec_lock_irqsave+0x216/0x220 [10109.860661] ? __pfx_lru_add+0x10/0x10 [10109.860665] folio_batch_move_lru+0xc8/0x450 [10109.860670] ? lock_acquire+0xc4/0x2d0 [10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0 [10109.860677] ? folio_migrate_mapping+0xa6/0x110 [10109.860679] ? folio_migrate_flags+0x13b/0x1b0 [10109.860681] ? __pfx_lru_add+0x10/0x10 [10109.860683] __folio_batch_add_and_move+0xe7/0x2e0 [10109.860685] ? dma_iova_try_alloc+0xb0/0x140 [10109.860689] folio_add_lru+0x64/0x80 [10109.860691] __migrate_device_finalize+0x12c/0x270 [10109.860695] migrate_device_finalize+0x10/0x20 [10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper] [10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper] [10109.860709] xe_svm_bo_evict+0x15/0x20 [xe] [10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe] [10109.860921] xe_bo_move+0x107e/0x1570 [xe] [10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe] [10109.861059] ? __up_read+0x98/0x2b0 [10109.861061] ? lock_is_held_type+0xa3/0x130 [10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm] [10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm] [10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm] [10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm] [10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe] [10109.861198] ttm_bo_alloc_resource+0x219/0 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: oa_tc6: Improve the error recovery When oversubscribed traffic causes lot of buffer overflow errors, probably due to loss of data chunks, driver fails to find a data chunk with end_valid bit set, before it runs out of sk buffer space. As a result, assert is seen during skb_put. Now, check is made if skb buffer has enough tailroom for the incoming data before accepting. If there is no room, current frame is abandoned and it will start looking for a data chunk with start_valid bit, that is a new frame. SK buffer allocation error is considered as recoverable error. rx_buf_overflow flag is too specific and no longer the only condition this flag is used for. Therefore it is renamed as wait_until_start_valid. This is more appropriate as this flag is used to look for the next data chunk with SV bit set, after failures like buffer overflow, buffer allocation failure, skb pointer validity besides buffer overflow error. Not writing to status0 if it reads 0.