CVE Intelligence
Medium Denial of service

CVE-2026-12629 — PL011 UART error interrupts never cleared, enabling an external-peer interrupt-storm denial of service

The ARM PL011 UART driver in drivers/serial/uart_pl011.c fails to acknowledge receive error interrupts. On the PL011, the framing, parity, break, and overrun error interrupts (PL011_IMSC_ERROR_MASK) are cleared only by writing the interrupt-clear register UARTICR; reading the data register clears the RX interrupt and the per-byte RSR status but not the error interrupt status in MIS. The interrupt service routine pl011_isr() acknowledged only the CTS modem-status interrupt and never wrote icr for the error bits, so an asserted error interrupt remains pending after the ISR returns. When an application enables error-interrupt reporting via the public uart_irq_err_enable() API, an attacker who controls the serial peer can deterministically assert these error bits by injecting line errors on the RX line — a baud/stop-bit mismatch or mid-character break (framing/break error), a flipped parity bit (parity error), or FIFO flooding (overrun error). Because the error interrupt is never cleared, the interrupt line stays asserted and the CPU re-enters pl011_isr() immediately and indefinitely, producing an interrupt-storm livelock from which the core makes no forward progress. The impact is an availability-only denial of service (permanent hang), reachable from an external or removable UART peer. Exploitation is gated by configuration: the error interrupt is off by default and no in-tree subsystem enables it, so only applications that explicitly call uart_irq_err_enable() on a PL011-based, interrupt-driven port are affected. The fix makes pl011_isr() acknowledge the pending error bits via uart->icr, breaking the loop, and additionally clears the latched RSR status in pl011_err_check().

Published Aug 17, 2026 · Updated Oct 15, 2026 · Sources: NIST National Vulnerability Database, CVE Program (cve.org) e CISA ADP · CNA: zephyr

Who exploits it and how urgent it is

A 0–100 score combining confirmed exploitation, ransomware and APT use, public exploits, EPSS and severity.

No exploitation signal in the sources consulted so far.
How the score was calculated
  • Technical severity (medium)+3

The score orders the patch queue; it does not replace your asset context (internet exposure, criticality, compensating controls).

Triage

Is it exploited, how likely is exploitation, what does it touch, and how severe do the sources call it.

Exploitation
Not confirmed
Not in CISA KEV — an absence of record, not proof it is unexploited.
EPSS FIRST
—
No EPSS score.
Affects
Zephyrproject
Zephyr
CVSS base
4.6
Medium · 2 source(s)

CISA SSVC assessment CISA

Three decision points CISA publishes for the CVEs it assesses (SSVC 2.0.3). A stakeholder decision, not a severity score.

Exploitation
None
none · proof-of-concept · active
Automatable
No
can an attacker script the kill-chain steps
Technical impact
Partial
partial · total control of the vulnerable component

Remediation

Fixes and mitigations documented by the sources — linked to the original advisory.

No fix documented by the sources we poll. That does not mean none exists: check the vendor advisory.

First 24 hours

Ordered from the record’s own fields — exposure first, because you cannot patch what you have not found. A rule-generated starting point.

  1. Identify exposed assets running the affected vendor/product/version combinations (Zephyrproject Zephyr).
  2. No fix documented in the sources: reduce exposure and monitor the vendor advisory.
  3. Search available logs for exploit probes matching the vulnerability class (denial of service), errors and authentication anomalies.

Affected scope

Vendor, product and versions as the sources word them.

VendorProductVersionsStatusSource
Zephyrproject Zephyr ≥ 1.14.0 and < 4.4.2 Vulnerable CVE Program (cve.org) e CISA ADP

Attack characteristics

The CVSS vector, decoded. It describes the attack, not your exposure to it.

Attack vector
Physical
Attack complexity
Low
Privileges required
None
User interaction
None
Scope
Unchanged
Confidentiality
None
Integrity
None
Availability
High

Every base score collected

Sources score independently and may disagree; each row says who scored it and under which version.

ScoreVersionSeverityExpl.ImpactScored by
4.6 CVSS 3.1 Medium 0.9 3.6 vulnerabilities@zephyrproject.org via NIST National Vulnerability Database
4.6 CVSS 3.1 Medium — — zephyr via CVE Program (cve.org) e CISA ADP
CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H (score shown at the top: vulnerabilities@zephyrproject.org)

Weakness MITRE

Weakness class according to MITRE’s CWE catalog.

CWE-835 · Infinite Loop

Other CVEs with this weakness →

Detection

Read off the CVSS vector and the weakness class. Starting points, not tested rules.

  • Local/physical vector: focus on endpoint telemetry (EDR) from affected hosts.
  • Track CPU/memory spikes and availability drops correlated with request patterns.
endpoint telemetry (EDR)resource metrics

Timeline

What happened to this CVE, newest first.

  • 2026
  • Affected products added · zephyrproject/zephyr
    Oct 15, 2026 · CVE Program (cve.org) e CISA ADP
  • SSVC assessment updated
    Oct 15, 2026 · CVE Program (cve.org) e CISA ADP
  • Record published
    Oct 15, 2026
  • CVSS changed · 4.6
    Oct 15, 2026 · NIST National Vulnerability Database
  • Source status changed · → Awaiting Analysis
    Oct 15, 2026 · NIST National Vulnerability Database
  • Record created in this database
    Oct 15, 2026 · NIST National Vulnerability Database
  • CVE published
    Aug 17, 2026 · zephyr

Source activity

Repeated readings are counted rather than listed.

  • 1× Official description updated · Oct 15, 2026 – Oct 15, 2026

References

2 on the record

Elsewhere on this site

Zephyrproject
every CVE for this vendor
Denial of service
same class
CWE-835
other pages naming this weakness

Related CVEs (same products)

  • CVE-2026-75085 Out-of-bounds read from received-frame length underflow in the STM32WBA IEEE 802.15.4 driver 1d
  • CVE-2026-75083 Integer underflow of the radio-reported frame length causes an out-of-bounds write in the NXP KW41Z IEEE 802.15.4 driver 1d
  • CVE-2026-75084 Out-of-bounds write in the TI CC1200 IEEE 802.15.4 driver from an unvalidated radio-supplied packet length 1d
  • CVE-2026-19673 Out-of-bounds read and net_buf length underflow in Zephyr Ethernet L2 when parsing a truncated VLAN header 1d
  • CVE-2026-19940 Bluetooth HFP AG reuses a connection slot while a delayable work item is still armed, corrupting kernel timeout bookkeeping 2d
  • CVE-2026-19939 Bluetooth Classic AVDTP: stale timeout work on signalling-channel disconnect leads to kernel timeout-list corruption 2d

Not in any source we poll

Listed rather than left blank: an empty field and an unmeasured one look identical on screen, and only one is a reason to look elsewhere.

  • No FIRST EPSS score.
  • No fixed version, patch or mitigation documented.
  • No confirmed IOCs, IP addresses, domains, file hashes, or malware artifacts supplied.
  • No organization-specific asset inventory, compensating-control status, or patch deployment evidence supplied.
  • No exploit packet captures, log samples, or incident case IDs supplied.

Answered from this record

Text assembled only from the fields above — no additional claims.

What should defenders know first?

CVE-2026-12629 is "PL011 UART error interrupts never cleared, enabling an external-peer interrupt-storm denial of service", rated Medium. It affects Zephyr (Zephyrproject); versions are in the scope table. It is not in CISA KEV, which does not rule out exploitation. CVSS 4.6 describes technical severity. First verify whether exposed or business-critical assets run the affected versions, apply vendor fixes or mitigations, and preserve logs for review.

Comments

Moderated technical discussion. Read the community guidelines.

No comments yet.

Sign in or create an account to comment and suggest corrections.