CVE-2026-23435 — perf/x86: Move event pointer setup earlier in x86_pmu_enable()
In the Linux kernel, the following vulnerability has been resolved: perf/x86: Move event pointer setup earlier in x86_pmu_enable() A production AMD EPYC system crashed with a NULL pointer dereference in the PMU NMI handler: BUG: kernel NULL pointer dereference, address: 0000000000000198 RIP: x86_perf_event_update+0xc/0xa0 Call Trace: <NMI> amd_pmu_v2_handle_irq+0x1a6/0x390 perf_event_nmi_handler+0x24/0x40 The faulting instruction is `cmpq $0x0, 0x198(%rdi)` with RDI=0, corresponding to the `if (unlikely(!hwc->event_base))` check in x86_perf_event_update() where hwc = &event->hw and event is NULL. drgn inspection of the vmcore on CPU 106 showed a mismatch between cpuc->active_mask and cpuc->events[]: active_mask: 0x1e (bits 1, 2, 3, 4) events[1]: 0xff1100136cbd4f38 (valid) events[2]: 0x0 (NULL, but active_mask bit 2 set) events[3]: 0xff1100076fd2cf38 (valid) events[4]: 0xff1100079e990a90 (valid) The event that should occupy events[2] was found in event_list[2] with hw.idx=2 and hw.state=0x0, confirming x86_pmu_start() had run (which clears hw.state and sets active_mask) but events[2] was never populated. Another event (event_list[0]) had hw.state=0x7 (STOPPED|UPTODATE|ARCH), showing it was stopped when the PMU rescheduled events, confirming the throttle-then-reschedule sequence occurred. The root cause is commit 7e772a93eb61 ("perf/x86: Fix NULL event access and potential PEBS record loss") which moved the cpuc->events[idx] assignment out of x86_pmu_start() and into step 2 of x86_pmu_enable(), after the PERF_HES_ARCH check. This broke any path that calls pmu->start() without going through x86_pmu_enable() -- specifically the unthrottle path: perf_adjust_freq_unthr_events() -> perf_event_unthrottle_group() -> perf_event_unthrottle() -> event->pmu->start(event, 0) -> x86_pmu_start() // sets active_mask but not events[] The race sequence is: 1. A group of perf events overflows, triggering group throttle via perf_event_throttle_group(). All events are stopped: active_mask bits cleared, events[] preserved (x86_pmu_stop no longer clears events[] after commit 7e772a93eb61). 2. While still throttled (PERF_HES_STOPPED), x86_pmu_enable() runs due to other scheduling activity. Stopped events that need to move counters get PERF_HES_ARCH set and events[old_idx] cleared. In step 2 of x86_pmu_enable(), PERF_HES_ARCH causes these events to be skipped -- events[new_idx] is never set. 3. The timer tick unthrottles the group via pmu->start(). Since commit 7e772a93eb61 removed the events[] assignment from x86_pmu_start(), active_mask[new_idx] is set but events[new_idx] remains NULL. 4. A PMC overflow NMI fires. The handler iterates active counters, finds active_mask[2] set, reads events[2] which is NULL, and crashes dereferencing it. Move the cpuc->events[hwc->idx] assignment in x86_pmu_enable() to before the PERF_HES_ARCH check, so that events[] is populated even for events that are not immediately started. This ensures the unthrottle path via pmu->start() always finds a valid event pointer.
Who exploits it and how urgent it is
A 0–100 score combining confirmed exploitation, ransomware and APT use, public exploits, EPSS and severity.
How the score was calculated
- EPSS 0.1% (30-day exploitation probability)+0
- Technical severity (medium)+3
The score orders the patch queue; it does not replace your asset context (internet exposure, criticality, compensating controls).
Triage
Is it exploited, how likely is exploitation, what does it touch, and how severe do the sources call it.
Remediation
Fixes and mitigations documented by the sources — linked to the original advisory.
- Documented patch — git.kernel.org (NIST National Vulnerability Database)
- Documented patch — git.kernel.org (NIST National Vulnerability Database)
- Documented patch — git.kernel.org (NIST National Vulnerability Database)
First 24 hours
Ordered from the record’s own fields — exposure first, because you cannot patch what you have not found. A rule-generated starting point.
- Identify exposed assets running the affected vendor/product/version combinations (Linux Linux, Linux Linux Kernel).
- Apply the fixed version or the patch documented under Remediation.
- Search available logs for exploit probes matching the vulnerability class (memory corruption), errors and authentication anomalies.
Affected scope
Vendor, product and versions as the sources word them.
| Vendor | Product | Versions | Status | Source |
|---|---|---|---|---|
| Linux | Linux | version 6.19≥ 6.17.13 and < 6.18≥ 6.18.2 and < 6.18.20version cf69b99805c263117305ac6dffbc85aaf9259d32≥ 7e772a93eb61cb6265bdd1c5bde17d0f2718b452 and < 8d5fae6011260de209aaf231120e8146b14bc8e0≥ 7e772a93eb61cb6265bdd1c5bde17d0f2718b452 and < c1dd1e2b722d3f1f2e4977dad8d1be78fdfb30cb≥ 6b089028bff1f2ff9e0c62b8f1faca1a620e5d6e and < 886fa869153917d902784098922defa20c3a2fe5 | Vulnerable | CVE Program (cve.org) e CISA ADP |
| Linux | Linux Kernel |
version 7.0-rc6version 7.0-rc7≥ 6.17.13 and < 6.18version 7.0-rc5version 7.0-rc4version 7.0-rc3version 7.0-rc2version 7.0-rc1 and 3 moreversion 6.19≥ 6.19.1 and < 6.19.10≥ 6.18.2 and < 6.18.20 |
Vulnerable | NIST National Vulnerability Database |
Attack characteristics
The CVSS vector, decoded. It describes the attack, not your exposure to it.
Every base score collected
Sources score independently and may disagree; each row says who scored it and under which version.
| Score | Version | Severity | Expl. | Impact | Scored by |
|---|---|---|---|---|---|
| 5.5 | CVSS 3.1 | Medium | 1.8 | 3.6 | nvd@nist.gov via NIST National Vulnerability Database |
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H (score shown at the top: nvd@nist.gov) Weakness MITRE
Weakness class according to MITRE’s CWE catalog.
EPSS over time FIRST
Oct 13, 2026 → Oct 14, 2026 · 2 reading(s) · max 0.12%
Detection
Read off the CVSS vector and the weakness class. Starting points, not tested rules.
- Local/physical vector: focus on endpoint telemetry (EDR) from affected hosts.
- Correlate service crashes/restarts with inbound traffic; repeated crashes may indicate attempts.
Timeline
What happened to this CVE, newest first.
- 2026
- Affected products added · linux/linux
- Record published
- Fix documented
- CVSS changed · 5.5
- Source status changed · → Analyzed
- Record created in this database
- CVE published
Source activity
Repeated readings are counted rather than listed.
- 1× Official description updated · Oct 13, 2026 – Oct 13, 2026
References
3 on the record
Elsewhere on this site
Related CVEs (same products)
- Critical CVE-2026-99999 ipv4: validate checksum_start before completing checksum 10h
- Unknown CVE-2026-98432 ipv4: free inet_opt and ireq_opt after an RCU grace period 10h
- Unknown CVE-2026-98424 wifi: cfg80211: undo netns switch if renaming the wiphy fails 1d
- Unknown CVE-2026-98425 wifi: mac80211: don't warn when an IBSS has no channel to scan 1d
- Unknown CVE-2026-98426 wifi: mwifiex: fix IRQ leak using wrong index in MSI-X error path 1d
- Unknown CVE-2026-98427 net/sched: codel: bound the dropping loop per dequeue call 1d
Not in any source we poll
Listed rather than left blank: an empty field and an unmeasured one look identical on screen, and only one is a reason to look elsewhere.
- No CISA SSVC assessment.
- No confirmed IOCs, IP addresses, domains, file hashes, or malware artifacts supplied.
- No organization-specific asset inventory, compensating-control status, or patch deployment evidence supplied.
- No exploit packet captures, log samples, or incident case IDs supplied.
Answered from this record
Text assembled only from the fields above — no additional claims.
What should defenders know first?
CVE-2026-23435 is "perf/x86: Move event pointer setup earlier in x86_pmu_enable()", rated Medium. It affects Linux (Linux); versions are in the scope table. It is not in CISA KEV, which does not rule out exploitation. CVSS 5.5 describes technical severity. EPSS 0.12% estimates the probability of exploitation in 30 days; neither replaces your asset context. First verify whether exposed or business-critical assets run the affected versions, apply vendor fixes or mitigations, and preserve logs for review.
Comments
Moderated technical discussion. Read the community guidelines.
No comments yet.
Sign in or create an account to comment and suggest corrections.