CVE Intelligence
Medium

CVE-2026-45973 — RDMA/mlx5: Fix UMR hang in LAG error state unload

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix UMR hang in LAG error state unload During firmware reset in LAG mode, a race condition causes the driver to hang indefinitely while waiting for UMR completion during device unload. See [1]. In LAG mode the bond device is only registered on the master, so it never sees sys_error events from the slave. During firmware reset this causes UMR waits to hang forever on unload as the slave is dead but the master hasn't entered error state yet, so UMR posts succeed but completions never arrive. Fix this by adding a sys_error notifier that gets registered before MLX5_IB_STAGE_IB_REG and stays alive until after ib_unregister_device(). This ensures error events reach the bond device throughout teardown. [1] Call Trace: __schedule+0x2bd/0x760 schedule+0x37/0xa0 schedule_preempt_disabled+0xa/0x10 __mutex_lock.isra.6+0x2b5/0x4a0 __mlx5_ib_dereg_mr+0x606/0x870 [mlx5_ib] ? __xa_erase+0x4a/0xa0 ? _cond_resched+0x15/0x30 ? wait_for_completion+0x31/0x100 ib_dereg_mr_user+0x48/0xc0 [ib_core] ? rdmacg_uncharge_hierarchy+0xa0/0x100 destroy_hw_idr_uobject+0x20/0x50 [ib_uverbs] uverbs_destroy_uobject+0x37/0x150 [ib_uverbs] __uverbs_cleanup_ufile+0xda/0x140 [ib_uverbs] uverbs_destroy_ufile_hw+0x3a/0xf0 [ib_uverbs] ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs] remove_client_context+0x8b/0xd0 [ib_core] disable_device+0x8c/0x130 [ib_core] __ib_unregister_device+0x10d/0x180 [ib_core] ib_unregister_device+0x21/0x30 [ib_core] __mlx5_ib_remove+0x1e4/0x1f0 [mlx5_ib] auxiliary_bus_remove+0x1e/0x30 device_release_driver_internal+0x103/0x1f0 bus_remove_device+0xf7/0x170 device_del+0x181/0x410 mlx5_rescan_drivers_locked.part.10+0xa9/0x1d0 [mlx5_core] mlx5_disable_lag+0x253/0x260 [mlx5_core] mlx5_lag_disable_change+0x89/0xc0 [mlx5_core] mlx5_eswitch_disable+0x67/0xa0 [mlx5_core] mlx5_unload+0x15/0xd0 [mlx5_core] mlx5_unload_one+0x71/0xc0 [mlx5_core] mlx5_sync_reset_reload_work+0x83/0x100 [mlx5_core] process_one_work+0x1a7/0x360 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x22/0x40

Published May 27, 2026 · Updated Oct 13, 2026 · Sources: NIST National Vulnerability Database, CVE Program (cve.org) e CISA ADP · CNA: Linux

Who exploits it and how urgent it is

A 0–100 score combining confirmed exploitation, ransomware and APT use, public exploits, EPSS and severity.

No exploitation signal in the sources consulted so far.
How the score was calculated
  • EPSS 0.2% (30-day exploitation probability)+1
  • Technical severity (medium)+3

The score orders the patch queue; it does not replace your asset context (internet exposure, criticality, compensating controls).

Triage

Is it exploited, how likely is exploitation, what does it touch, and how severe do the sources call it.

Exploitation
Not confirmed
Not in CISA KEV — an absence of record, not proof it is unexploited.
EPSS FIRST
0.16%
ahead of 5% of scored CVEs · Oct 14, 2026
Affects
Linux
Linux and 1 more
CVSS base
5.5
Medium · 1 source(s)

Remediation

Fixes and mitigations documented by the sources — linked to the original advisory.

  • Documented patch — git.kernel.org (NIST National Vulnerability Database)
  • Documented patch — git.kernel.org (NIST National Vulnerability Database)
  • Documented patch — git.kernel.org (NIST National Vulnerability Database)
  • Documented patch — git.kernel.org (NIST National Vulnerability Database)

First 24 hours

Ordered from the record’s own fields — exposure first, because you cannot patch what you have not found. A rule-generated starting point.

  1. Identify exposed assets running the affected vendor/product/version combinations (Linux Linux, Linux Linux Kernel).
  2. Apply the fixed version or the patch documented under Remediation.
  3. Search available logs for exploit probes, errors and authentication anomalies.

Affected scope

Vendor, product and versions as the sources word them.

VendorProductVersionsStatusSource
Linux Linux ≥ 6b0acf6a94c31efa43fce4edc22413a3390f9c05 and < c8fb5c965ac7d0104872a8e4f6451f3bc6328199≥ ede132a5cf559f3ab35a4c28bac4f4a6c20334d8 and < 6d838873da9cb97551d42316967cc82bf8f8031b≥ ede132a5cf559f3ab35a4c28bac4f4a6c20334d8 and < 613f5d4139b6ba801ccd93f9a28943be60d903bc≥ ede132a5cf559f3ab35a4c28bac4f4a6c20334d8 and < ebc2164a4cd4314503f1a0c8e7aaf76d7e5fa211version 921fcf2971a1e8d3b904ba2c2905b96f4ec3d4adversion 542bd62b7a7f37182c9ef192c2bd25d118c144e4≥ 6.12.2 and < 6.12.75≥ 6.6.64 and < 6.7
and 2 more ≥ 6.11.11 and < 6.12version 6.13
Vulnerable CVE Program (cve.org) e CISA ADP
Linux Linux Kernel ≥ 6.6.64 and < 6.7≥ 6.11.11 and < 6.12≥ 6.12.2 and < 6.12.75≥ 6.13 and < 6.18.14≥ 6.19 and < 6.19.4 Vulnerable NIST National Vulnerability Database

Attack characteristics

The CVSS vector, decoded. It describes the attack, not your exposure to it.

Attack vector
Local
Attack complexity
Low
Privileges required
Low
User interaction
None
Scope
Unchanged
Confidentiality
None
Integrity
None
Availability
High

Every base score collected

Sources score independently and may disagree; each row says who scored it and under which version.

ScoreVersionSeverityExpl.ImpactScored by
5.5 CVSS 3.1 Medium 1.8 3.6 nvd@nist.gov via NIST National Vulnerability Database
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H (score shown at the top: nvd@nist.gov)

EPSS over time FIRST

Oct 13, 2026 → Oct 14, 2026 · 2 reading(s) · max 0.16%

Detection

Read off the CVSS vector and the weakness class. Starting points, not tested rules.

  • Local/physical vector: focus on endpoint telemetry (EDR) from affected hosts.
endpoint telemetry (EDR)

Timeline

What happened to this CVE, newest first.

  • 2026
  • Affected products added · linux/linux
    Oct 13, 2026 · CVE Program (cve.org) e CISA ADP
  • Record published
    Oct 13, 2026
  • Fix documented
    Oct 13, 2026 · NIST National Vulnerability Database
  • CVSS changed · 5.5
    Oct 13, 2026 · NIST National Vulnerability Database
  • Source status changed · → Analyzed
    Oct 13, 2026 · NIST National Vulnerability Database
  • Record created in this database
    Oct 13, 2026 · NIST National Vulnerability Database
  • CVE published
    May 27, 2026 · Linux

Source activity

Repeated readings are counted rather than listed.

  • 1× Official description updated · Oct 13, 2026 – Oct 13, 2026

References

4 on the record

Elsewhere on this site

Linux
every CVE for this vendor

Related CVEs (same products)

  • CVE-2026-99999 ipv4: validate checksum_start before completing checksum 6h
  • CVE-2026-98432 ipv4: free inet_opt and ireq_opt after an RCU grace period 6h
  • CVE-2026-98424 wifi: cfg80211: undo netns switch if renaming the wiphy fails 1d
  • CVE-2026-98425 wifi: mac80211: don't warn when an IBSS has no channel to scan 1d
  • CVE-2026-98426 wifi: mwifiex: fix IRQ leak using wrong index in MSI-X error path 1d
  • CVE-2026-98427 net/sched: codel: bound the dropping loop per dequeue call 1d

Not in any source we poll

Listed rather than left blank: an empty field and an unmeasured one look identical on screen, and only one is a reason to look elsewhere.

  • No CISA SSVC assessment.
  • No CWE classification.
  • No confirmed IOCs, IP addresses, domains, file hashes, or malware artifacts supplied.
  • No organization-specific asset inventory, compensating-control status, or patch deployment evidence supplied.
  • No exploit packet captures, log samples, or incident case IDs supplied.

Answered from this record

Text assembled only from the fields above — no additional claims.

What should defenders know first?

CVE-2026-45973 is "RDMA/mlx5: Fix UMR hang in LAG error state unload", rated Medium. It affects Linux (Linux); versions are in the scope table. It is not in CISA KEV, which does not rule out exploitation. CVSS 5.5 describes technical severity. EPSS 0.16% estimates the probability of exploitation in 30 days; neither replaces your asset context. First verify whether exposed or business-critical assets run the affected versions, apply vendor fixes or mitigations, and preserve logs for review.

Comments

Moderated technical discussion. Read the community guidelines.

No comments yet.

Sign in or create an account to comment and suggest corrections.