Medium

CVE-2026-46295 — KVM: x86: Do IRR scan in __kvm_apic_update_irr even if PIR is empty

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Do IRR scan in __kvm_apic_update_irr even if PIR is empty Fall back to apic_find_highest_vector() when PID.ON is set but PIR turns out to be empty, to correctly report the highest pending interrupt from the existing IRR. In a nested VM stress test, the following WARNING fires in vmx_check_nested_events() when kvm_cpu_has_interrupt() reports a pending interrupt but the subsequent kvm_apic_has_interrupt() (which invokes vmx_sync_pir_to_irr() again) returns -1: WARNING: CPU: 99 PID: 57767 at arch/x86/kvm/vmx/nested.c:4449 vmx_check_nested_events+0x6bf/0x6e0 [kvm_intel] Call Trace: kvm_check_and_inject_events vcpu_enter_guest.constprop.0 vcpu_run kvm_arch_vcpu_ioctl_run kvm_vcpu_ioctl __x64_sys_ioctl do_syscall_64 entry_SYSCALL_64_after_hwframe The root cause is a race between vmx_sync_pir_to_irr() on the target vCPU and __vmx_deliver_posted_interrupt() on a sender vCPU. The sender performs two individually-atomic operations that are not a single transaction: 1. pi_test_and_set_pir(vector) -- sets the PIR bit 2. pi_test_and_set_on() -- sets PID.ON The following interleaving triggers the bug: Sender vCPU (IPI): Target vCPU (1st sync_pir_to_irr): B1: set PIR[vector] A1: pi_clear_on() A2: pi_harvest_pir() -> sees B1 bit A3: xchg() -> consumes bit, PIR=0 (1st sync returns correct max_irr) B2: set PID.ON = 1 Target vCPU (2nd sync_pir_to_irr): C1: pi_test_on() -> TRUE (from B2) C2: pi_clear_on() -> ON=0 C3: pi_harvest_pir() -> PIR empty C4: *max_irr = -1, early return IRR NOT SCANNED The interrupt is not lost (it resides in the IRR from the first sync and is recovered on the next vcpu_enter_guest() iteration), but the incorrect max_irr causes a spurious WARNING and a wasted L2 VM-Enter/VM-Exit cycle.

Published Jun 8, 2026 · Updated Oct 13, 2026 · Sources: NIST National Vulnerability Database, CVE Program (cve.org) e CISA ADP · CNA: Linux

Low

Who exploits it and how urgent it is

A 0–100 score combining confirmed exploitation, ransomware and APT use, public exploits, EPSS and severity.

No exploitation signal in the sources consulted so far.

How the score was calculated

EPSS 0.2% (30-day exploitation probability)+1
Technical severity (medium)+3

The score orders the patch queue; it does not replace your asset context (internet exposure, criticality, compensating controls).

Triage

Is it exploited, how likely is exploitation, what does it touch, and how severe do the sources call it.

Exploitation

Not confirmed

Not in CISA KEV — an absence of record, not proof it is unexploited.

EPSS FIRST

0.16%

ahead of 5% of scored CVEs · Oct 15, 2026

Affects

Linux

Linux and 1 more

CVSS base

5.5

Medium · 1 source(s)

Remediation

Fixes and mitigations documented by the sources — linked to the original advisory.

Documented patch — git.kernel.org (NIST National Vulnerability Database)
Documented patch — git.kernel.org (NIST National Vulnerability Database)
Documented patch — git.kernel.org (NIST National Vulnerability Database)

First 24 hours

Ordered from the record’s own fields — exposure first, because you cannot patch what you have not found. A rule-generated starting point.

Identify exposed assets running the affected vendor/product/version combinations (Linux Linux, Linux Linux Kernel).
Apply the fixed version or the patch documented under Remediation.
Search available logs for exploit probes, errors and authentication anomalies.

Affected scope

Vendor, product and versions as the sources word them.

Vendor	Product	Versions	Status	Source
Linux	Linux	≥ b41f8638b9d30fbe045b4ef83ff4136c56a57397 and < bb1703949dcaa9a49c338dee075f659f4634214d≥ b41f8638b9d30fbe045b4ef83ff4136c56a57397 and < 4b6b06a8b12bfd95f9015074b1430c1480908073≥ b41f8638b9d30fbe045b4ef83ff4136c56a57397 and < 33fd0ccd2590b470b65adcca288615ad3b5e3e06version 6.16	Vulnerable	CVE Program (cve.org) e CISA ADP
Linux	Linux Kernel	≥ 6.16 and < 6.18.30≥ 6.19 and < 7.0.7version 7.1-rc1version 7.1-rc2	Vulnerable	NIST National Vulnerability Database

Attack characteristics

The CVSS vector, decoded. It describes the attack, not your exposure to it.

Attack vector

Local

Attack complexity

Low

Privileges required

Low

User interaction

None

Scope

Unchanged

Confidentiality

None

Integrity

None

Availability

High

Every base score collected

Sources score independently and may disagree; each row says who scored it and under which version.

Score	Version	Severity	Expl.	Impact	Scored by
5.5	CVSS 3.1	Medium	1.8	3.6	nvd@nist.gov via NIST National Vulnerability Database

CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H (score shown at the top: nvd@nist.gov)

EPSS over time FIRST

Oct 13, 2026 → Oct 15, 2026 · 3 reading(s) · max 0.16%

Detection

Read off the CVSS vector and the weakness class. Starting points, not tested rules.

Local/physical vector: focus on endpoint telemetry (EDR) from affected hosts.

endpoint telemetry (EDR)

Timeline

What happened to this CVE, newest first.

2026
Affected products added · linux/linux
Oct 13, 2026 · CVE Program (cve.org) e CISA ADP
Record published
Oct 13, 2026
Fix documented
Oct 13, 2026 · NIST National Vulnerability Database
CVSS changed · 5.5
Oct 13, 2026 · NIST National Vulnerability Database
Source status changed · → Analyzed
Oct 13, 2026 · NIST National Vulnerability Database
Record created in this database
Oct 13, 2026 · NIST National Vulnerability Database
CVE published
Jun 8, 2026 · Linux

Source activity

Repeated readings are counted rather than listed.

1× Official description updated · Oct 13, 2026 – Oct 13, 2026

References

3 on the record

git.kernel.org/stable/c/4b6b06a8b12bfd95f9015074b1430c1480908073
Patch, NIST National Vulnerability Database
git.kernel.org/stable/c/bb1703949dcaa9a49c338dee075f659f4634214d
Patch, NIST National Vulnerability Database
git.kernel.org/stable/c/33fd0ccd2590b470b65adcca288615ad3b5e3e06
Patch, NIST National Vulnerability Database

Elsewhere on this site

Linux
every CVE for this vendor

Related CVEs (same products)

Critical CVE-2026-99999 ipv4: validate checksum_start before completing checksum 1d
Unknown CVE-2026-98432 ipv4: free inet_opt and ireq_opt after an RCU grace period 1d
Unknown CVE-2026-98424 wifi: cfg80211: undo netns switch if renaming the wiphy fails 2d
Unknown CVE-2026-98425 wifi: mac80211: don't warn when an IBSS has no channel to scan 2d
Unknown CVE-2026-98426 wifi: mwifiex: fix IRQ leak using wrong index in MSI-X error path 2d
Unknown CVE-2026-98427 net/sched: codel: bound the dropping loop per dequeue call 2d

Not in any source we poll

Listed rather than left blank: an empty field and an unmeasured one look identical on screen, and only one is a reason to look elsewhere.

No CISA SSVC assessment.
No CWE classification.
No confirmed IOCs, IP addresses, domains, file hashes, or malware artifacts supplied.
No organization-specific asset inventory, compensating-control status, or patch deployment evidence supplied.
No exploit packet captures, log samples, or incident case IDs supplied.

Answered from this record

Text assembled only from the fields above — no additional claims.

What should defenders know first?

CVE-2026-46295 is "KVM: x86: Do IRR scan in __kvm_apic_update_irr even if PIR is empty", rated Medium. It affects Linux (Linux); versions are in the scope table. It is not in CISA KEV, which does not rule out exploitation. CVSS 5.5 describes technical severity. EPSS 0.16% estimates the probability of exploitation in 30 days; neither replaces your asset context. First verify whether exposed or business-critical assets run the affected versions, apply vendor fixes or mitigations, and preserve logs for review.

Comments

Moderated technical discussion. Read the community guidelines.

No comments yet.