CVE Intelligence
Unknown

CVE-2026-68469 — wifi: mwifiex: fix permanently busy scans after multiple roam iterations

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix permanently busy scans after multiple roam iterations In order for the firmware to sleep, the driver has to confirm a previously received sleep request. The normal sequence of evets goes like this: EVENT_SLEEP -> adapter->ps_state = PS_STATE_PRE_SLEEP -> sleep-confirm -> SLEEP -> EVENT_AWAKE -> AWAKE. Before sending the sleep-confirm command, the driver must make sure there are no commands either running or waiting to be completed. mwifiex_ret_802_11_associate() unconditionally sets ps_state = PS_STATE_AWAKE when it processes the association command response, outside of the normal powersave management flow. If EVENT_SLEEP arrives while the association command is in flight, ps_state is PRE_SLEEP when the association command response is parsed, and the forced AWAKE overwrites it. The deferred sleep-confirm is never sent. A subsequent scan_start command is correctly acknowledged, but the firmware doesn't generate scan_result events. The scan request never finishes, and additional requests from userspace fail with -EBUSY. After testing on both IW412 and W8997, I could only trigger the bug on the IW412 and observed the firmwares behave differently. On the IW412 the firmware still sends EVENT_SLEEP while the authentication / association process is ongoing. A W8997 under the same conditions seems to suppress power-save for the duration of the association, so PRE_SLEEP never coincided with the association response even after extended periods of testing using the loops described below (>12hours). On the IW412, the delay between commands that triggers an EVENT_SLEEP was empirically determined to be ~20ms. This delay can naturally occur when the driver is outputting debugging information (debug_mask = 0x00000037), in which situation the busy scans issue is repeatable while running "test 1)" as described below. If the delay between commands is less than ~20ms, the firmware stays awake and the issue was not reproducible running the same test. The host_mlme=false path also behaves differently. In this case, the entire authentication / association transaction is executed by one command (HostCmd_CMD_802_11_ASSOCIATE), and the firmware doesn't emit EVENT_SLEEP while the command is running. Remove the assignment so the ps_state is only manipulated in the paths that are related to powersave event handling and on the main workqueue for correct sleep confirmation. The following loop tests were performed (with debugging output enabled): 1) force roaming between two AP's, one 5GHz and one 2.4GHz, same SSID. Use wpa_cli to trigger the roaming behavior, sleep 2s between iterations. 2) force a disconnection to AP 1 and a connection to AP 2, test scan. Use wpa_cli to trigger the connection changes, sleep 2s between iterations. Each test ran in each device for at least 3 hours.

Published Aug 15, 2026 · Updated Oct 15, 2026 · Sources: NIST National Vulnerability Database, CVE Program (cve.org) e CISA ADP · CNA: Linux

Who exploits it and how urgent it is

A 0–100 score combining confirmed exploitation, ransomware and APT use, public exploits, EPSS and severity.

No exploitation signal in the sources consulted so far.
How the score was calculated
  • EPSS 0.3% (30-day exploitation probability)+3

The score orders the patch queue; it does not replace your asset context (internet exposure, criticality, compensating controls).

Triage

Is it exploited, how likely is exploitation, what does it touch, and how severe do the sources call it.

Exploitation
Not confirmed
Not in CISA KEV — an absence of record, not proof it is unexploited.
EPSS FIRST
0.26%
ahead of 18% of scored CVEs · Oct 30, 2026
Affects
Linux
Linux
CVSS base
—
Score not published yet.

Remediation

Fixes and mitigations documented by the sources — linked to the original advisory.

No fix documented by the sources we poll. That does not mean none exists: check the vendor advisory.

First 24 hours

Ordered from the record’s own fields — exposure first, because you cannot patch what you have not found. A rule-generated starting point.

  1. Identify exposed assets running the affected vendor/product/version combinations (Linux Linux).
  2. No fix documented in the sources: reduce exposure and monitor the vendor advisory.
  3. Search available logs for exploit probes, errors and authentication anomalies.

Affected scope

Vendor, product and versions as the sources word them.

VendorProductVersionsStatusSource
Linux Linux ≥ 5e6e3a92b9a4c9416b17f468fa5c7fa2233b8b4e and < 2ed36b2586f16c480ed58de303af704c2235e16d≥ 5e6e3a92b9a4c9416b17f468fa5c7fa2233b8b4e and < 5796eabe435d83544b6fe39851ce47ca68fdb778≥ 5e6e3a92b9a4c9416b17f468fa5c7fa2233b8b4e and < 31a2c409f8f58d20f0f6391c151421155768ed77≥ 5e6e3a92b9a4c9416b17f468fa5c7fa2233b8b4e and < deb5f0ae384f1cf41fccaf6375266db2f2911b2b≥ 5e6e3a92b9a4c9416b17f468fa5c7fa2233b8b4e and < 1bc55db2d34756bd53e4460dbb699619ee13cd7f≥ 5e6e3a92b9a4c9416b17f468fa5c7fa2233b8b4e and < a59cfa165aee3e29d06145041c0ebe46a51de604≥ 5e6e3a92b9a4c9416b17f468fa5c7fa2233b8b4e and < 6126e12bf8c87badeab41a164c9689ac88e5c160≥ 5e6e3a92b9a4c9416b17f468fa5c7fa2233b8b4e and < d78a407bad6f500884a8606aea1a5a9207be4030
and 1 more version 3.0
Vulnerable CVE Program (cve.org) e CISA ADP

EPSS over time FIRST

Oct 15, 2026 → Oct 30, 2026 · 15 reading(s) · max 0.26%

Detection

Read off the CVSS vector and the weakness class. Starting points, not tested rules.

  • Not enough vector or weakness data: use the affected application’s logs as a starting point.
application logs

Timeline

What happened to this CVE, newest first.

  • 2026
  • Record published
    Oct 15, 2026
  • Affected products added · linux/linux
    Oct 15, 2026 · CVE Program (cve.org) e CISA ADP
  • Source status changed · → Received
    Oct 15, 2026 · NIST National Vulnerability Database
  • Record created in this database
    Oct 15, 2026 · NIST National Vulnerability Database
  • CVE published
    Aug 15, 2026 · Linux

Source activity

Repeated readings are counted rather than listed.

  • 1× Official description updated · Oct 15, 2026 – Oct 15, 2026

References

8 on the record

Elsewhere on this site

Linux
every CVE for this vendor

Related CVEs (same products)

  • CVE-2026-99216 Drivers: hv: Don't reset VMBus connection state on error/exit paths 2d
  • CVE-2026-99215 power: supply: core: prevent unregistering a power supply while a callback runs 2d
  • CVE-2026-99207 scsi: target: Disable interrupts while holding delayed_cmd_lock 2d
  • CVE-2026-99208 drm/xe/oa: Zero OA buffer at allocation 2d
  • CVE-2026-99209 drm/xe: skip eviction of a BO with no resource 2d
  • CVE-2026-99210 accel/rocket: clear rdev on device init failure 2d

Not in any source we poll

Listed rather than left blank: an empty field and an unmeasured one look identical on screen, and only one is a reason to look elsewhere.

  • No CVSS score published by NVD, the CNA, CISA or GitHub so far.
  • No fixed version, patch or mitigation documented.
  • No CISA SSVC assessment.
  • No CWE classification.
  • No confirmed IOCs, IP addresses, domains, file hashes, or malware artifacts supplied.
  • No organization-specific asset inventory, compensating-control status, or patch deployment evidence supplied.
  • No exploit packet captures, log samples, or incident case IDs supplied.

Answered from this record

Text assembled only from the fields above — no additional claims.

What should defenders know first?

CVE-2026-68469 is "wifi: mwifiex: fix permanently busy scans after multiple roam iterations", rated Unknown. It affects Linux (Linux); versions are in the scope table. It is not in CISA KEV, which does not rule out exploitation. EPSS 0.26% estimates the probability of exploitation in 30 days; neither replaces your asset context. First verify whether exposed or business-critical assets run the affected versions, apply vendor fixes or mitigations, and preserve logs for review.

Comments

Moderated technical discussion. Read the community guidelines.

No comments yet.

Sign in or create an account to comment and suggest corrections.