CVE Intelligence
Unknown

CVE-2026-80789 — nvmet-tcp: bound SGL data length before allocating command buffers

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: bound SGL data length before allocating command buffers nvmet_tcp_map_data() reads the host-controlled 32-bit sgl->length and, for the in-capsule offset descriptor (type 0x01), checks it against port->inline_data_size before use. Any other SGL descriptor type -- including the non-inline transport SGL data-block descriptor (type (NVME_TRANSPORT_SGL_DATA_DESC << 4) | NVME_SGL_FMT_TRANSPORT_A, the type a real host uses for out-of-capsule writes) skips that check entirely and falls straight through to: cmd->req.sg = sgl_alloc(len, GFP_KERNEL, &cmd->req.sg_cnt); with len taken directly from the wire, unbounded up to 4 GiB. nvmet_req_init() only parses the command and never inspects sgl->length, and nvmet_check_transfer_len() -- the only other place transfer_len is validated -- runs later, from req->execute(), after the allocation has already happened. For a write command the target responds with an R2T and parks the command waiting for the host to send the data; if the host (or an unauthenticated peer that simply never follows up) never does, the sgl_alloc() buffer stays resident for the life of the command. NVMe/TCP has no mandatory authentication in the default configuration, so any peer able to reach the target portal and complete a Fabrics connect can drive this with a single crafted command, repeatable across queues and connections for amplification. This is unbounded kernel memory allocation triggered by a remote, effectively unauthenticated peer. Validate len against the same NVMET_TCP_MAXH2CDATA ceiling this file already uses to bound per-PDU H2C data, for every SGL descriptor type, before doing any allocation. This closes the gap for the non-inline descriptor while leaving the existing, tighter inline_data_size check in place for the in-capsule case. Runtime-verified on a v6.19 KASAN stand: with this bound in place, a crafted write command carrying an oversized non-inline SGL length is rejected before sgl_alloc() runs, where the same request previously drove an unbounded ~256 MiB kernel allocation (up to 4 GiB) that stayed resident pending an R2T the host never satisfies.

Published Sep 4, 2026 · Updated Oct 19, 2026 · Sources: NIST National Vulnerability Database, CVE Program (cve.org) e CISA ADP, GitHub Security Advisories · CNA: Linux

Who exploits it and how urgent it is

A 0–100 score combining confirmed exploitation, ransomware and APT use, public exploits, EPSS and severity.

No exploitation signal in the sources consulted so far.
How the score was calculated
  • EPSS 0.2% (30-day exploitation probability)+2

The score orders the patch queue; it does not replace your asset context (internet exposure, criticality, compensating controls).

Triage

Is it exploited, how likely is exploitation, what does it touch, and how severe do the sources call it.

Exploitation
Not confirmed
Not in CISA KEV — an absence of record, not proof it is unexploited.
EPSS FIRST
0.23%
ahead of 14% of scored CVEs · Oct 26, 2026
Affects
Linux
Linux
CVSS base
—
Score not published yet.

Remediation

Fixes and mitigations documented by the sources — linked to the original advisory.

No fix documented by the sources we poll. That does not mean none exists: check the vendor advisory.

First 24 hours

Ordered from the record’s own fields — exposure first, because you cannot patch what you have not found. A rule-generated starting point.

  1. Identify exposed assets running the affected vendor/product/version combinations (Linux Linux).
  2. No fix documented in the sources: reduce exposure and monitor the vendor advisory.
  3. Search available logs for exploit probes, errors and authentication anomalies.

Affected scope

Vendor, product and versions as the sources word them.

VendorProductVersionsStatusSource
Linux Linux ≥ 872d26a391da92ed8f0c0f5cb5fef428067b7f30 and < f6e51b09cbaa5f6f6e6a3a9dafa666f76c37aab5≥ 872d26a391da92ed8f0c0f5cb5fef428067b7f30 and < f63e89a0310264264923f84406dea05fe752de62≥ 872d26a391da92ed8f0c0f5cb5fef428067b7f30 and < 0952541b153e258b99d39cdb03ea6919fdeb41d0≥ 872d26a391da92ed8f0c0f5cb5fef428067b7f30 and < 25ad03d5c0e858c4b63f1e4b6d461d2af1b30b22≥ 872d26a391da92ed8f0c0f5cb5fef428067b7f30 and < d2acc96c528d589f5827cfb90e8e9229dd9d8cb4≥ 872d26a391da92ed8f0c0f5cb5fef428067b7f30 and < 6d27199ebe8cb223022150f74be13f154a964474≥ 872d26a391da92ed8f0c0f5cb5fef428067b7f30 and < 14dbe37681a6a7e346fc147bb363ec7cca3180a0≥ 872d26a391da92ed8f0c0f5cb5fef428067b7f30 and < d895e66628f939edbb98608f6e033d3d39e6e546
and 2 more ≥ 872d26a391da92ed8f0c0f5cb5fef428067b7f30 and < 4a3f00262a044e8e15064b1a6860968bf0500bf4version 5.0
Vulnerable CVE Program (cve.org) e CISA ADP

EPSS over time FIRST

Oct 15, 2026 → Oct 26, 2026 · 11 reading(s) · max 0.23%

Detection

Read off the CVSS vector and the weakness class. Starting points, not tested rules.

  • Not enough vector or weakness data: use the affected application’s logs as a starting point.
application logs

Timeline

What happened to this CVE, newest first.

  • 2026
  • Record published
    Oct 15, 2026
  • Affected products added · linux/linux
    Oct 15, 2026 · CVE Program (cve.org) e CISA ADP
  • Source status changed · → Received
    Oct 15, 2026 · NIST National Vulnerability Database
  • Record created in this database
    Oct 15, 2026 · NIST National Vulnerability Database
  • CVE published
    Sep 4, 2026 · Linux

Source activity

Repeated readings are counted rather than listed.

  • 1× References added · Oct 19, 2026 – Oct 19, 2026
  • 1× Official description updated · Oct 15, 2026 – Oct 15, 2026

References

11 on the record

Elsewhere on this site

Linux
every CVE for this vendor

Related CVEs (same products)

  • CVE-2026-99092 riscv: patch: fix handling of bpf-jit execmem addresses 1d
  • CVE-2026-99093 mm: don't schedule deferred kernel page table freeing while booting 1d
  • CVE-2026-99095 drm/vc4: drain the hangcheck timer and works on V3D unbind 1d
  • CVE-2026-99096 io_uring/register: don't exempt disabled rings from task restrictions 1d
  • CVE-2026-99097 tee: shm: reject zero-sized allocations in tee_dyn_shm_alloc_helper() 1d
  • CVE-2026-99098 dm-integrity: fix buffer overflow in inline mode with large tag size 1d

Not in any source we poll

Listed rather than left blank: an empty field and an unmeasured one look identical on screen, and only one is a reason to look elsewhere.

  • No CVSS score published by NVD, the CNA, CISA or GitHub so far.
  • No fixed version, patch or mitigation documented.
  • No CISA SSVC assessment.
  • No CWE classification.
  • No confirmed IOCs, IP addresses, domains, file hashes, or malware artifacts supplied.
  • No organization-specific asset inventory, compensating-control status, or patch deployment evidence supplied.
  • No exploit packet captures, log samples, or incident case IDs supplied.

Answered from this record

Text assembled only from the fields above — no additional claims.

What should defenders know first?

CVE-2026-80789 is "nvmet-tcp: bound SGL data length before allocating command buffers", rated Unknown. It affects Linux (Linux); versions are in the scope table. It is not in CISA KEV, which does not rule out exploitation. EPSS 0.23% estimates the probability of exploitation in 30 days; neither replaces your asset context. First verify whether exposed or business-critical assets run the affected versions, apply vendor fixes or mitigations, and preserve logs for review.

Comments

Moderated technical discussion. Read the community guidelines.

No comments yet.

Sign in or create an account to comment and suggest corrections.