Home / CVEs
CVE Database
Published vulnerabilities with severity, known exploitation and official sources.
CVE-2026-15903
High · 8.8
CWE-125 Jul 20, 2026
Out of bounds read and write in V8 in Google Chrome prior to 150.0.7871.128 allowed a remote...
Out of bounds read and write in V8 in Google Chrome prior to 150.0.7871.128 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High)
CVE-2026-55639
Medium · 5.3
CWE-125 Jul 20, 2026
xrdp: Out-of-bounds read in GCC Conference Create Request CS_SECURITY processing (xrdp_sec_process_mcs_data_CS_SECURITY)
xrdp is an open source RDP server. Versions 0.10.6 and prior contain a vulnerability concerning the parsing of Client Security Data within the Client MCS Connect Initial PDU with GCC Conference Create Request during the connection sequence. During the initial capability and security negotiation phase, the parser fails to perform sufficient length validation for the incoming data block. A remote, unauthenticated attacker could potentially exploit this flaw by sending a specially crafted RDP packet containing malformed data. Due to missing bounds checks, the xrdp process may read a small number of bytes beyond the declared data block boundary, potentially disclosing process memory contents that could be combined with other vulnerabilities. This issue has been fixed in version 0.10.6.1.
CVE-2026-64191
High · 7.8
CWE-125 Jul 20, 2026
i2c: stub: Reject I2C block transfers with invalid length
In the Linux kernel, the following vulnerability has been resolved:
i2c: stub: Reject I2C block transfers with invalid length
The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0]
as the transfer length. The existing check only clamps it to avoid
overrunning the chip->words[256] register array, but does not validate
it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union
i2c_smbus_data.block buffer (34 bytes total). The driver is a
development/test tool (CONFIG_I2C_STUB=m, not built by default)
that must be loaded with a chip_addr= parameter.
A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl
with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing
stub_xfer() to read or write past the end of the union
i2c_smbus_data.block buffer:
BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223)
Read of size 1 at addr ffff88800abcfd92 by task exploit/81
Call Trace:
<TASK>
stub_xfer (drivers/i2c/i2c-stub.c:223)
__i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593)
i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536)
i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391)
i2cdev_ioctl (drivers/i2c/i2c-dev.c:478)
__x64_sys_ioctl (fs/ioctl.c:583)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
The bug exists because i2c-stub implements .smbus_xfer directly,
bypassing the I2C_SMBUS_BLOCK_MAX validation in
i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same
function correctly validates against I2C_SMBUS_BLOCK_MAX, but the
I2C_SMBUS_I2C_BLOCK_DATA case does not.
Fix by rejecting transfers with data->block[0] == 0 or
data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with
both the I2C_SMBUS_BLOCK_DATA case in the same function and the
I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated().
CVE-2026-55645
Medium · 6.5
CWE-125 Jul 20, 2026
xrdp: Out-of-bounds read in Client Control PDU processing (xrdp_rdp_process_data_control)
xrdp is an open source RDP server. Versions 0.10.6 and prior contain a vulnerability concerning the processing of Client Control PDUs. During the RDP connection sequence, the parser does not perform sufficient length validation before reading specific data fields from the network stream. A remote, unauthenticated attacker could potentially exploit this flaw by sending a specially crafted, truncated Client Control PDU. Due to missing bounds checks, the xrdp process may perform out-of-bounds memory reads, which can result in the termination of the service (Denial of Service). However, since xrdp forks a new process for each connection by default, an out-of-bounds read causing a process crash is unlikely to bring down the entire xrdp service.This issue has been fixed in version 0.10.6.1.
CVE-2026-35217
Medium · 6.5
CWE-125 Jul 20, 2026
NanoMQ Incorrectly Accepts a Malformed SUBSCRIBE and Can Be Driven into an ASAN-Detectable Out-of-Bounds Read
NanoMQ contains a protocol-semantics flaw in its MQTT v5 `SUBSCRIBE` handling: if a subscription entry is missing the final 1-byte `Subscription Options` field, the broker may still accept the malformed packet and install the subscription into internal broker state. Under a specific packet-length construction, the same parser flaw also causes a 1-byte out-of-bounds read that crosses the real heap allocation boundary and is detected by ASAN as a `heap-buffer-overflow`.
If the consumed byte happens to look acceptable, NanoMQ may continue and append the malformed subscription entry into its internal `subinfol` state. In that case, a `SUBSCRIBE` packet that should be rejected by MQTT rules is instead treated as a successful subscription. Whether ASAN reports the bug does not depend on MQTT's logical `remain` boundary; it depends on whether the read crosses the real heap allocation boundary of the underlying message buffer. In other words, these are not two unrelated issues. They are two manifestations of the same parsing defect: by default, it appears as a semantic vulnerability, and under suitable input conditions, it also becomes a verifiable out-of-bounds read vulnerability.
CVE-2026-26197
High · 7.5
CWE-125 Jul 20, 2026
Array full size, element count, and element size are not checked to make sure they match in H5Odtype.c
HDF5 is a high-performance library and a file format specification that implements the HDF5 data model. If a file is corrupted such that an array datatype's size, the number of elements, and the element size are not in agreement it can trigger an out of bounds read. The array datatype stores the full size of the datatype (`dt->shared->size`) separately from the number of elements (`dt->shared->u.array.nelem`) and the element size (`dt->shared->parent->shared->size`). If any one of these are corrupted so that they don't align with the others (element size * nelem = full size), it can lead to an out of bounds read. Depending on what is corrupted, it can alter the type of out of bounds read triggered. The vulnerability is present only in files that have been maliciously altered, as its generally not possible to independently alter the full size of the datatype, the element count and the element size. As such, this is only present if a malicious actor is altering files, and won't appear in regular usage.
CVE-2026-16254
Medium · 4.3
CWE-125 Jul 20, 2026
Claircore: claircore: denial of service via out-of-bounds slice in claircore's apk installed-database parser
A flaw was found in claircore's apk package scanner. Malformed package-database data in a container layer can cause an out-of-bounds access that panics the scanner. If that panic is not recovered, the Clair indexer process can crash, leading to a denial of service.
CVE-2026-64186
High · 7.1
CWE-125 Jul 19, 2026
iommu/amd: Remove latent out-of-bounds access in IOMMU debugfs
In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Remove latent out-of-bounds access in IOMMU debugfs
In iommu_mmio_write() and iommu_capability_write(), the variables
dbg_mmio_offset and dbg_cap_offset are declared as int. However, they
are populated using kstrtou32_from_user(). If a user provides a
sufficiently large value, it can become a negative integer.
Prior to this patch, the AMD IOMMU debugfs implementation was already
protected by different mechanisms.
1. #define OFS_IN_SZ 8 ensures the user string <= 8 bytes, so
e.g. 0xffffffff isn't a valid input.
if (cnt > OFS_IN_SZ)
return -EINVAL;
2. Implicit type promotion in iommu_mmio_write(), dbg_mmio_offset is int
and iommu->mmio_phys_end is u64
if (dbg_mmio_offset > iommu->mmio_phys_end - sizeof(u64))
return -EINVAL;
3. The show handlers would currently catch the negative number and
refuse to perform the read.
Replace kstrtou32_from_user() with kstrtos32_from_user() to parse the
input, and check for negative values to explicitly prevent out-of-bounds
memory accesses directly in iommu_mmio_write() and
iommu_capability_write().
CVE-2026-64133
High · 7.8
CWE-125 Jul 19, 2026
ALSA: asihpi: Fix potential OOB array access at reading cache
In the Linux kernel, the following vulnerability has been resolved:
ALSA: asihpi: Fix potential OOB array access at reading cache
find_control() to retrieve a cached info accesses the array with the
given index blindly, which may lead to an OOB array access.
Add a sanity check for avoiding it.
CVE-2026-64126
High · 7.3
CWE-125 Jul 19, 2026
Bluetooth: MGMT: validate Add Extended Advertising Data length
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate Add Extended Advertising Data length
MGMT_OP_ADD_EXT_ADV_DATA is registered as a variable-length command,
with MGMT_ADD_EXT_ADV_DATA_SIZE as the fixed header size. The handler
then uses cp->adv_data_len and cp->scan_rsp_len to validate and copy
cp->data, but it never checks that those bytes are part of the mgmt
command payload.
A short command can therefore make add_ext_adv_data() pass an
out-of-bounds pointer into tlv_data_is_valid(). If the bytes beyond
the command buffer are addressable, they can also be copied into the
advertising instance as scan response data, where the caller can read
them back via MGMT_OP_GET_ADV_INSTANCE. The trigger requires
CAP_NET_ADMIN in the initial user namespace; KASAN reports an 8-byte
slab-out-of-bounds read.
Reject commands whose length does not match the fixed header plus both
advertising data lengths before parsing cp->data.
CVE-2026-64121
High · 7.1
CWE-125 Jul 19, 2026
net: ifb: report ethtool stats over num_tx_queues
In the Linux kernel, the following vulnerability has been resolved:
net: ifb: report ethtool stats over num_tx_queues
ifb_dev_init() allocates dp->tx_private to dev->num_tx_queues
entries via kzalloc_objs(*txp, dev->num_tx_queues). Both IFB
per-queue RX and TX stats live in those entries: ifb_xmit() updates
txp->rx_stats using the skb queue mapping, ifb_ri_tasklet() updates
txp->tx_stats, and ifb_stats64() aggregates both over
dev->num_tx_queues.
The ethtool stats callbacks instead size and walk the per-queue
stats with dev->real_num_rx_queues and dev->real_num_tx_queues. With
an asymmetric device where the RX queue count exceeds the TX queue
count, for example:
ip link add name ifb10 numtxqueues 1 numrxqueues 8 type ifb
ethtool -S ifb10
ifb_get_ethtool_stats() indexes past the tx_private allocation and
copies adjacent slab data through ETHTOOL_GSTATS.
Use dev->num_tx_queues consistently for the stats strings, the
stats count, and the stats data walks. This reports one RX stats
group and one TX stats group for each backing ifb_q_private entry,
which is the queue set IFB can actually populate.
Reproduced under UML+KASAN at v7.1-rc2:
BUG: KASAN: slab-out-of-bounds in ifb_fill_stats_data+0x3c/0xae
Read of size 8 at addr 0000000062dbd228 by task ethtool/36
ifb_fill_stats_data+0x3c/0xae
ifb_get_ethtool_stats+0xc0/0x129
__dev_ethtool+0x1ca5/0x363c
dev_ethtool+0x123/0x1b3
dev_ioctl+0x56c/0x744
sock_do_ioctl+0x15f/0x1b2
sock_ioctl+0x4d5/0x50a
sys_ioctl+0xd8b/0xde9
With the patch applied, the same UML+KASAN repro is silent and
ethtool -S ifb10 reports only the stats backed by the single
allocated tx_private entry.
CVE-2026-64114
High · 7.8
CWE-125 Jul 19, 2026
ipv4: raw: reject IP_HDRINCL packets with ihl < 5
In the Linux kernel, the following vulnerability has been resolved:
ipv4: raw: reject IP_HDRINCL packets with ihl < 5
raw_send_hdrinc() validates that the caller-supplied IPv4 header
fits within the message length:
iphlen = iph->ihl * 4;
err = -EINVAL;
if (iphlen > length)
goto error_free;
if (iphlen >= sizeof(*iph)) {
/* fix up saddr, tot_len, id, csum, transport_header */
}
It does not, however, reject ihl < 5. For such a packet the
"if (iphlen >= sizeof(*iph))" branch is skipped, leaving the
crafted iphdr untouched, but the packet is still handed to
__ip_local_out() and onward. Downstream consumers that read
iph->ihl assume a sane value: net/ipv4/ah4.c:ah_output() in
particular subtracts sizeof(struct iphdr) from top_iph->ihl * 4
and passes the (signed-int-negative, then cast to size_t)
result to memcpy(), producing an OOB access of length close to
SIZE_MAX and a host kernel panic.
An IPv4 header with ihl < 5 is malformed by definition (RFC 791:
"Internet Header Length is the length of the internet header in
32 bit words ... Note that the minimum value for a correct header
is 5."). The kernel should not be willing to inject such a
packet into its own output path.
Reject "iphlen < sizeof(*iph)" alongside the existing
"iphlen > length" check. This matches the principle that locally
constructed packets that re-enter the IP stack must pass the same
basic sanity tests that a foreign packet would be subjected to.
Once this lands, the "if (iphlen >= sizeof(*iph))" wrapper around
the fixup branch becomes redundant; left in place to keep the
patch minimal and backport-friendly. A follow-up can unwrap it.
Note that commit 86f4c90a1c5c ("ipv4, ipv6: ensure raw socket
message is big enough to hold an IP header") ensures the message
buffer is large enough to hold an iphdr, but does not constrain
the self-reported iph->ihl.
Reachability: the malformed packet source is any caller with
CAP_NET_RAW, including an unprivileged process in a user+net
namespace on a kernel with CONFIG_USER_NS=y. The reproduced AH
crash also requires a matching xfrm AH policy on the outgoing
route; a container granted CAP_NET_ADMIN can install that state
and policy in its netns. Loopback bypasses xfrm_output, so the
trigger uses a real netdev.
Reproduced on UML + KASAN: kernel-mode fault at addr 0x0 with
memcpy_orig at the crash site. Same shape reproduces inside a
rootless Docker container with --cap-add NET_ADMIN on a stock
distro kernel.
CVE-2026-64102
Critical · 9.8
CWE-125 Jul 19, 2026
RDMA/siw: Reject MPA FPDU length underflow before signed receive math
In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Reject MPA FPDU length underflow before signed receive math
A malicious connected siw peer can send an iWARP FPDU whose MPA length
field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller
than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP
parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode]
.hdr_len, but never compares mpa_len against that header length.
siw_tcp_rx_data() then derives
srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd
+ MPA_HDR_SIZE;
where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this
point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest
on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below
hdr_len - MPA_HDR_SIZE underflows to a negative int.
The signed value then flows into siw_proc_write()/siw_proc_rresp() as
bytes = min(srx->fpdu_part_rem, srx->skb_new);
is handed to siw_check_mem() as an int len (whose interval check
addr + len > mem->va + mem->len is satisfied for a valid base when
len is negative), and reaches siw_rx_data() -> siw_rx_kva() /
siw_rx_umem() -> skb_copy_bits() as a signed copy length. The header
copy branch in skb_copy_bits() promotes that to size_t, producing a
multi-gigabyte read.
KASAN under a KUnit harness that drives the real kernel TCP receive
path -- a loopback AF_INET socketpair, the malformed FPDU written via
kernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sock
dispatching to siw_tcp_rx_data -- reports:
BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480
Read of size 4294967295 at addr ffff888...
Call Trace:
skb_copy_bits
siw_rx_kva
siw_rx_data
siw_check_mem
siw_proc_write
siw_tcp_rx_data
__tcp_read_sock
siw_qp_llp_data_ready
tcp_data_ready
tcp_data_queue
Add the missing invariant at the earliest point where the peer header
is fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactly
the value the siw transmitter uses as the minimum mpa_len for each
opcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches the
protocol contract. Out-of-range FPDUs terminate the connection with
TERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- which
is RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fields
do not agree on the start of an FPDU"), the correct framing-error
class for this inconsistency.
CVE-2026-64069
Critical · 9.8
CWE-125 Jul 19, 2026
netfs: Fix cancellation of a DIO and single read subrequests
In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix cancellation of a DIO and single read subrequests
When the preparation of a new subrequest for a read fails, if the
subrequest has already been added to the stream->subrequests list, it can't
simply be put and abandoned as the collector may see it. Also, if it
hasn't been queued yet, it has two outstanding refs that both need to be
put. Both DIO read and single-read dispatch fail at this; further, both
differ in the order they do things to the way buffered read works.
Fix cancellation of both DIO-read and single-read subrequests that failed
preparation by the following steps:
(1) Harmonise all three reads (buffered, dio, single) to queue the subreq
before prepping it.
(2) Make all three call netfs_queue_read() to do the queuing.
(3) Set NETFS_RREQ_ALL_QUEUED independently of the queuing as we don't
know the length of the subreq at this point.
(4) In all cases, set the error and NETFS_SREQ_FAILED flag on the subreq
and then call netfs_read_subreq_terminated() to deal with it. This
will pass responsibility off to the collector for dealing with it.
CVE-2026-64066
Critical · 9.8
CWE-125 Jul 19, 2026
netfs: Fix netfs_read_to_pagecache() to pause on subreq failure
In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix netfs_read_to_pagecache() to pause on subreq failure
Fix netfs_read_to_pagecache() so that it pauses the generation of new
subrequests if an already-issued subrequest fails.
CVE-2026-64058
High · 7.8
CWE-125 Jul 19, 2026
netfs: Fix netfs_read_folio() to wait on writeback
In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix netfs_read_folio() to wait on writeback
Fix netfs_read_folio() to wait for an ongoing writeback to complete so that
it can trust the dirty flag and whatever is attached to folio->private
(folio->private may get cleaned up by the collector before it clears the
writeback flag).
CVE-2026-64053
High · 7.8
CWE-125 Jul 19, 2026
block: don't overwrite bip_vcnt in bio_integrity_copy_user()
In the Linux kernel, the following vulnerability has been resolved:
block: don't overwrite bip_vcnt in bio_integrity_copy_user()
bio_integrity_add_page() already sets bip_vcnt to 1 for the bounce
segment. Overwriting it with nr_vecs breaks bip_vcnt <= bip_max_vcnt
on WRITE (bip_max_vcnt is 1), so the gap-merge checks in block/blk.h
read past the bip_vec[] flex array. On READ the read is in bounds
but lands on a saved user bvec instead of the bounce.
The line was added for split propagation, but bio_integrity_clone()
doesn't copy bip_vcnt and BIP_CLONE_FLAGS excludes BIP_COPY_USER.
CVE-2026-64030
High · 8.8
CWE-125 Jul 19, 2026
wifi: mac80211: bounds-check link_id in ieee80211_ml_epcs
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: bounds-check link_id in ieee80211_ml_epcs
IEEE80211_MLE_STA_EPCS_CONTROL_LINK_ID is 0x000f, so link_id extracted
from a PRIO_ACCESS ML element PER_STA_PROFILE subelement can be 0..15.
sdata->link[] has IEEE80211_MLD_MAX_NUM_LINKS (15) entries (indices 0..14),
making index 15 out-of-bounds.
A connected WiFi 7 AP can trigger this by sending an EPCS Enable Response
action frame with a PER_STA_PROFILE subelement where link_id = 15. The
unsolicited-notification path (dialog_token = 0) is reachable any time
EPCS is already enabled, without any prior client request.
sdata->link[15] reads into the first word of sdata->activate_links_work
(a wiphy_work whose embedded list_head is non-NULL after INIT_LIST_HEAD),
so the NULL check on the result does not catch the invalid access. The
garbage pointer is then passed to ieee80211_sta_wmm_params(), which
dereferences link->sdata and crashes the kernel.
The same class of bug was fixed for ieee80211_ml_reconfiguration() by
commit 162d331d833d ("wifi: mac80211: bounds-check link_id in
ieee80211_ml_reconfiguration").
CVE-2026-64015
High · 7.8
CWE-125 Jul 19, 2026
security/keys: fix missed RCU read section on lookup
In the Linux kernel, the following vulnerability has been resolved:
security/keys: fix missed RCU read section on lookup
Nicholas Carlini reports that the keyring code calls assoc_array_find()
in find_key_to_update() without holding the RCU read lock, while the
assoc_array_gc() code really is designed around removing the node from
the tree and then freeing it after an RCU grace-period.
The regular key handling doesn't see this because holding the keyring
semaphore hides any lifetime issues, but the persistent key handling
uses a different model.
Instead of extending the keyring locking, just do the simple RCU locking
that the assoc_array was designed for.
CVE-2026-64014
High · 7.1
CWE-125 Jul 19, 2026
Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer size
In the Linux kernel, the following vulnerability has been resolved:
Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer size
nexio_read_data() pulls data_len and x_len from a packed __be16 header
in the device's interrupt packet and then walks packet->data[0..x_len)
and packet->data[x_len..data_len) comparing each byte against a
threshold.
Both fields are 16-bit on the wire (max 65535). The existing
adjustments shave at most 0x100 / 0x80 off, so the loop bound can still
reach roughly 0xfeff. The URB transfer buffer for NEXIO is rept_size
(1024) bytes from usb_alloc_coherent(), with the first 7 occupied by the
packed header — so packet->data[] has 1017 valid bytes. read_data()
callbacks are not given urb->actual_length, and nothing else bounds the
walk.
A device that lies about its length can get a ~64 KiB out-of-bounds read
past the coherent DMA allocation. The first index whose byte exceeds
NEXIO_THRESHOLD lands in begin_x / begin_y and from there into the
reported touch coordinates, so adjacent kernel memory contents leak to
userspace as ABS_X / ABS_Y events. Far enough out, the read can also
hit an unmapped page and fault.
Fix this all by clamping data_len to the buffer's data[] capacity and
x_len to data_len.
CVE-2026-64000
Critical · 9.8
CWE-125 Jul 19, 2026
net: hsr: fix potential OOB access in supervision frame handling
In the Linux kernel, the following vulnerability has been resolved:
net: hsr: fix potential OOB access in supervision frame handling
Ensure the entire TLV header is linearized before access by adding
sizeof(struct hsr_sup_tlv) to the pskb_may_pull() calls. Without this,
a truncated frame could cause an out-of-bounds access.
CVE-2026-63992
Critical · 9.1
CWE-125 Jul 19, 2026
tunnels: do not assume transport header in iptunnel_pmtud_check_icmp()
In the Linux kernel, the following vulnerability has been resolved:
tunnels: do not assume transport header in iptunnel_pmtud_check_icmp()
In some cases, iptunnel_pmtud_check_icmp() can be called while
skb transport header is not set.
This triggers an out-of-bound access, because
(typeof(skb->transport_header))~0U is 65535.
Access the icmp header based on IPv4 network header,
after making sure icmp->type is present in skb linear part.
Note that iptunnel_pmtud_check_icmpv6()) is fine.
CVE-2026-63985
High · 7.8
CWE-125 Jul 19, 2026
ethtool: eeprom: add more safeties to EEPROM Netlink fallback
In the Linux kernel, the following vulnerability has been resolved:
ethtool: eeprom: add more safeties to EEPROM Netlink fallback
The Netlink fallback path for reading module EEPROM
(fallback_set_params()) validates that offset < eeprom_len,
but does not check that offset + length stays within eeprom_len.
The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has
always enforced both bounds:
if (eeprom.offset + eeprom.len > total_len)
return -EINVAL;
This could lead to surprises in both drivers and device FW.
Add the missing offset + length validation to fallback_set_params(),
mirroring the ioctl.
Similarly - ethtool core in general, and ethtool_get_any_eeprom()
in particular tries to zero-init all buffers passed to the drivers
to avoid any extra work of zeroing things out. eeprom_fallback()
uses a plain kmalloc(), change it to zalloc.
CVE-2026-63949
High · 7.1
CWE-125 Jul 19, 2026
auxdisplay: line-display: fix OOB read on zero-length message_store()
In the Linux kernel, the following vulnerability has been resolved:
auxdisplay: line-display: fix OOB read on zero-length message_store()
linedisp_display() unconditionally reads msg[count - 1] before
checking whether count is zero, so a write of zero bytes to the
message sysfs attribute hits msg[-1]:
write(fd, "", 0);
-> message_store(..., buf, count=0)
-> linedisp_display(linedisp, buf, count=0)
-> msg[count - 1] == '\n' ; OOB read
The kernfs write buffer for that store is a 1-byte allocation
(kernfs_fop_write_iter() does kmalloc(len + 1) with len == 0),
so msg[-1] is a 1-byte read before the slab object. On a
KASAN-enabled kernel this trips an out-of-bounds report and
panics; on stock kernels it silently reads adjacent slab data
and, if that byte happens to be '\n', the following count--
wraps ssize_t 0 to -1 and is then passed to kmemdup_nul().
linedisp_display() is reached from the message_store() sysfs
callback (drivers/auxdisplay/line-display.c message attribute,
mode 0644) and from the in-tree initial-message setup with
count == -1, so the OOB path is only userspace-triggerable via
zero-byte writes; vfs_write() does not short-circuit on
count == 0 and kernfs_fop_write_iter() dispatches the store
callback regardless.
Guard the trailing-newline trim with a count check. The
existing if (!count) block then takes the clear-display path
unchanged.
Affects every auxdisplay driver that registers via
linedisp_register() / linedisp_attach(): ht16k33, max6959,
img-ascii-lcd, seg-led-gpio.
CVE-2026-63947
High · 8.8
CWE-125 Jul 19, 2026
Bluetooth: HIDP: fix missing length checks in hidp_input_report()
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: HIDP: fix missing length checks in hidp_input_report()
hidp_input_report() reads keyboard and mouse payload data from an skb
without first verifying that skb->len contains enough data.
hidp_recv_intr_frame() pulls the 1-byte HIDP header before dispatching
to hidp_input_report(). If a paired device sends a truncated packet,
the handler reads beyond the valid skb data, resulting in an
out-of-bounds read of skb data. The OOB bytes may be interpreted as
phantom key presses or spurious mouse movement.
Replace the open-coded length tracking and pointer arithmetic with
skb_pull_data() calls. skb_pull_data() returns NULL if the requested
bytes are not present, eliminating the need for a manual size variable
and the separate skb->len guard.