CVE Database

In the Linux kernel, the following vulnerability has been resolved: Input: xpad - fix out-of-bounds access for Share button xpadone_process_packet() receives len directly from urb->actual_length and uses it to index the share-button byte at data[len - 18] or data[len - 26]. Since both len and data[0] are under the device's control, a broken controller can send a GIP_CMD_INPUT packet with actual_length < 18 (e.g. 5 bytes) and reach this code path, causing accesses beyond the actual array. Fix this by calculating the offset and checking bounds against the packet length.

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: itg3200: fix i2c read into the wrong stack location itg3200_read_all_channels() takes `__be16 *buf' as a parameter and fills the i2c_msg destination as `(char *)&buf'. Since `buf' is the parameter (a pointer), `&buf' is the address of the local pointer slot on the stack of itg3200_read_all_channels(), not the address of the caller's scan buffer. The (char *) cast hides the type mismatch. i2c_transfer() therefore writes ITG3200_SCAN_ELEMENTS * sizeof(s16) = 8 bytes into the parameter's stack slot, which is discarded when the function returns. The caller's scan buffer in itg3200_trigger_handler() is never written to, so iio_push_to_buffers_with_timestamp() pushes uninitialised stack contents to userspace via /dev/iio:deviceX every scan -- both a functional bug (no actual gyroscope or temperature data is delivered through the triggered buffer) and an information leak. The non-buffered read_raw() path is unaffected: it goes through itg3200_read_reg_s16() which uses `&out' on a local s16 value, where that is correct. Drop the spurious `&' so the i2c read writes into the caller's buffer.

In the Linux kernel, the following vulnerability has been resolved: ipv6: validate extension header length before copying to cmsg ip6_datagram_recv_specific_ctl() builds IPV6_{HOPOPTS,DSTOPTS,RTHDR} cmsgs (and their IPV6_2292* legacy counterparts) by trusting the on-wire hdrlen byte (ptr[1]) when computing the put_cmsg() length. The length was validated only at parse time (ipv6_parse_hopopts(), etc.). An nftables payload-write expression can rewrite hdrlen after parsing and before the skb reaches recvmsg; the write itself is in-bounds but put_cmsg() then reads up to ((hdrlen+1) << 3) = 2040 bytes from an 8-byte header. nftables is reachable from an unprivileged user namespace, so this is an unprivileged slab-out-of-bounds read: BUG: KASAN: slab-out-of-bounds in put_cmsg+0x3ac/0x540 put_cmsg+0x3ac/0x540 udpv6_recvmsg+0xca0/0x1250 sock_recvmsg+0xdf/0x190 ____sys_recvmsg+0x1b1/0x620 Add ipv6_get_exthdr_len() which validates that at least two bytes are accessible before reading the hdrlen field, then checks the computed length against skb_tail_pointer(skb), returning 0 on failure. Extension headers are kept in the linear skb area by pskb_may_pull() during input, so skb_tail_pointer() is the correct bound. Use ipv6_get_exthdr_len() at all non-AH call sites: the five standalone cmsg blocks (HbH, 2292HbH, 2292DSTOPTS x2, 2292RTHDR) and the three standard cases in the extension-header walk loop (DSTOPTS, ROUTING, default). AH retains an inline bounds check because its length formula differs ((ptr[1]+2)<<2). The walk loop also gets a pre-read bounds check at the top to validate ptr before any case accesses ptr[0] or ptr[1]. When the walk loop detects a corrupted header, return from the function instead of continuing to process later socket options.

In the Linux kernel, the following vulnerability has been resolved: nfc: hci: fix out-of-bounds read in HCP header parsing Both nfc_hci_recv_from_llc() and nci_hci_data_received_cb() read packet->header from skb->data at function entry without first checking that the buffer holds at least one byte. A malicious NFC peer can send a 0-byte HCP frame that passes through the SHDLC layer and reaches these functions, causing an out-of-bounds heap read of packet->header. The same 0-byte frame, if queued as a non-final fragment, also causes the reassembly loop to underflow msg_len to UINT_MAX, triggering skb_over_panic() when the reassembled skb is written. Fix this by adding a pskb_may_pull() check at the entry of each function before packet->header is first accessed. The existing pskb_may_pull() checks before the reassembled hcp_skb is cast to struct hcp_packet remain in place to guard the 2-byte HCP message header.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: OOB read regression in smb_check_perm_dacl() ACE-walk loops Commit d07b26f39246 ("ksmbd: require minimum ACE size in smb_check_perm_dacl()") introduced a transposed bounds check: if (offsetof(struct smb_ace, sid) + aces_size < CIFS_SID_BASE_SIZE) Since offsetof(..sid) is 8 and CIFS_SID_BASE_SIZE is 8, this evaluates to `aces_size < 0`. Because `aces_size` is always non-negative, this check becomes dead code and never breaks the loop. Worse, that commit removed the old 4-byte guard, meaning the loop now reads `ace->size` (offset 2) even when `aces_size` is 0-3 bytes. This re-opens a 2-byte heap out-of-bounds (OOB) read past the pntsd allocation during subsequent SMB2_CREATE operations. Fix this by properly transposing the comparison to require at least 16 bytes (8-byte offset + 8-byte SID base), matching the correct form used in smb_inherit_dacl().

In the Linux kernel, the following vulnerability has been resolved: usb: usbtmc: check URB actual_length for interrupt-IN notifications USBTMC devices can use an optional interrupt endpoint for notification messages. These typically contain two-byte headers indicating the payload format, but the driver does not check if these headers are present before accessing the data buffers. In cases where the URB actual_length is not enough to fit these headers, the driver will either cause an out-of-bounds read, or consume stale leftover data from a previous notification. Fix by checking if actual_data contains enough bytes for the headers, otherwise resubmit URB to the interrupt endpoint.

In the Linux kernel, the following vulnerability has been resolved: USB: serial: belkin_sa: validate interrupt status length The Belkin interrupt callback treats interrupt data as a four-byte status report and reads LSR/MSR fields at offsets 2 and 3. The interrupt-in buffer length is derived from endpoint wMaxPacketSize, and short interrupt transfers may complete successfully with a smaller actual_length. Check the completed interrupt packet length before parsing status fields so short interrupt endpoints and short successful packets are ignored instead of causing out-of-bounds or stale status-byte reads. KASAN report as below: BUG: KASAN: slab-out-of-bounds in belkin_sa_read_int_callback() Read of size 1 Call trace: belkin_sa_read_int_callback() (drivers/usb/serial/belkin_sa.c:202) __usb_hcd_giveback_urb() (drivers/usb/core/hcd.c:1630) dummy_timer() (?:?)

In the Linux kernel, the following vulnerability has been resolved: USB: serial: cypress_m8: validate interrupt packet headers cypress_read_int_callback() parses the interrupt-in buffer according to the selected Cypress packet format. Format 1 has a two-byte status/count header and format 2 has a one-byte combined status/count header. The usb-serial core sizes the interrupt-in buffer from the endpoint descriptor's wMaxPacketSize, and successful interrupt transfers can complete short when URB_SHORT_NOT_OK is not set. Check that the completed packet contains the selected header before reading it. Malformed short reports are ignored and the interrupt URB is resubmitted through the existing retry path, preventing out-of-bounds header-byte reads. KASAN report as below: KASAN slab-out-of-bounds in cypress_read_int_callback+0x240/0x7f0 Read of size 1 Call trace: cypress_read_int_callback() (drivers/usb/serial/cypress_m8.c:1009) __usb_hcd_giveback_urb() dummy_timer() [ johan: use constants in header length sanity checks ]

In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Ensure hugepage is in by slot before checking max mapping level When recovering hugepages in the shadow MMU, verify that the base gfn of the shadow page is actually contained within the target memslot, *before* querying the max mapping level given the shadow page's gfn. Failure to pre-check the validity of the gfn can lead to an out-of-bounds access to the slot's lpage_info (which typically manifests as a host #PF because the lpage_info is vmalloc'd) if the guest creates a hugepage mapping (in its PTEs) that extends "below" the bounds of a memslot. When faulting in memory for a guest, and the size of the guest mapping is greater than KVM's (current) max mapping, then KVM will create a "direct" shadow page (direct in that there are no gPTEs to shadow, and so the target gfn is a direct calculation given the base gfn of the shadow page). The hugepage recovery flow looks for such direct shadow pages, as forcing 4KiB mappings when dirty logging generates the guest > host mapping size case. When the 4KiB restriction is lifted, then KVM can replace the shadow page with a hugepage. But if KVM originally used a smaller mapping than the guest because the range of memory covered by the guest hugepage exceeds the bounds of a memslot, then KVM will link a direct shadow page with a gfn that is outside the bounds of the memslot being used to fault in memory. The rmap entry added for the leaf mapping is correct and within bounds, but the gfn of the leaf SPTE's parent shadow page will be out of bounds. BUG: unable to handle page fault for address: ffffc90000806ffc #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 100000067 P4D 100000067 PUD 1002a7067 PMD 10612f067 PTE 0 Oops: Oops: 0000 [#1] SMP CPU: 13 UID: 1000 PID: 757 Comm: mmu_stress_test Not tainted 7.1.0-rc1-48ce1e26eace-x86_pir_to_irr_comments-vm #341 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_mmu_max_mapping_level+0x79/0x2b0 [kvm] Call Trace: <TASK> kvm_mmu_recover_huge_pages+0x21b/0x320 [kvm] kvm_set_memslot+0x1ee/0x590 [kvm] kvm_set_memory_region.part.0+0x3a1/0x4d0 [kvm] kvm_vm_ioctl+0x9bf/0x15d0 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb7/0xbb0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f21c0f1a9bf </TASK> Don't bother pre-checking the bounds of the potential hugepage, i.e. don't check that e.g. sp->gfn + KVM_PAGES_PER_HPAGE(sp->role.level + 1) is also within the memslot, as the checks performed by kvm_mmu_max_mapping_level() are a superset of the basic bounds checks. I.e. pre-checking the full range would be a dubious micro-optimization.

In the Linux kernel, the following vulnerability has been resolved: sched/mmcid: Fix OOB clear_bit when CID is MM_CID_UNSET in fixup path In mm_cid_fixup_cpus_to_tasks(), when rq->curr has the target mm and mm_cid.active is set, the CID is checked with cid_in_transit() before setting the transition bit. In per-CPU mode a newly forked or exec'd task can be running with mm_cid.cid == MM_CID_UNSET because CIDs are assigned lazily on schedule-in. With cid_in_transit() the guard passes for MM_CID_UNSET (no transit bit), converts it to MM_CID_UNSET | MM_CID_TRANSIT and stores it back; later mm_cid_schedout() feeds this to clear_bit() with MM_CID_UNSET as the bit number, triggering an out-of-bounds write. Symptoms: this is genuine memory corruption, but a bounded out-of-bounds write, not an arbitrary one. MM_CID_UNSET is the fixed sentinel BIT(31), so once the bad value reaches mm_cid_schedout() the cid_from_transit_cid() strip leaves MM_CID_UNSET, which fails the "cid < max_cids" convergence test and falls into mm_drop_cid() -> clear_bit(MM_CID_UNSET, mm_cidmask(mm)). The cid bitmap is embedded in the mm_struct slab object (after cpu_bitmap and mm_cpus_allowed) and is only num_possible_cpus() bits wide, so clearing bit 31 is a deterministic OOB bit-clear at a fixed offset of 2^31 / 8 == 256 MiB past the bitmap base. The address is not attacker-influenced (fixed sentinel -> fixed offset) and the op only clears a single bit; what sits 256 MiB further along the direct map is whatever kernel object happens to live there, so this corrupts one bit of unpredictable kernel memory -- it is not an arbitrary-address or arbitrary-value write. It triggers only in per-CPU CID mode, when a CPU is running an active task of the target mm whose cid is still MM_CID_UNSET -- the fork()/execve() window before that task's next schedule-in assigns it a real CID -- and a per-CPU -> per-task fixup walks over it (the mode fallback driven by a thread exit, sched_mm_cid_exit(), or by the deferred max_cids recompute in mm_cid_work_fn()). In practice syzkaller surfaced it as a KASAN use-after-free reported in __schedule -> mm_cid_switch_to, where the offending clear_bit() is inlined via mm_cid_schedout() -> mm_drop_cid(). Guard the transition-bit assignment against MM_CID_UNSET, in addition to the existing cid_in_transit() check, so the bit is only set on a genuine task-owned CID. A CPU-owned (MM_CID_ONCPU) CID of a running active task is handled by the cid_on_cpu(pcp->cid) branch above and never reaches this path, so excluding MM_CID_UNSET (and the already-transitioning case) is sufficient.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject oversized group bitmap descriptors ocfs2_validate_gd_parent() only bounds bg_bits against the parent allocator's chain geometry. A malicious descriptor can still claim a bg_size/bg_bits pair that exceeds the bitmap bytes that physically fit in the group descriptor block, so later bitmap scans and bit updates can run past bg_bitmap. Add a physical-cap check based on ocfs2_group_bitmap_size() for the parent allocator type and reject descriptors whose bg_size or bg_bits exceed that capacity. Keep the existing chain geometry check so both the on-disk bitmap layout and the allocator metadata must agree before the descriptor is used. Validation reproduced this kernel report: KASAN use-after-free in _find_next_bit+0x7f/0xc0 Read of size 8 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xd0/0x630 (?:?) _find_next_bit+0x7f/0xc0 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x188/0x2f0 (?:?) kasan_report+0xe4/0x120 (?:?) ocfs2_find_max_contig_free_bits+0x35/0x70 (fs/ocfs2/suballoc.c:1375) ocfs2_block_group_set_bits+0x472/0x4b0 (fs/ocfs2/suballoc.c:1457) ocfs2_cluster_group_search+0x16b/0x440 (fs/ocfs2/suballoc.c:86) ocfs2_bg_discontig_fix_result+0x1ef/0x230 (fs/ocfs2/suballoc.c:1786) ocfs2_search_chain+0x8f8/0x10a0 (fs/ocfs2/suballoc.c:1886) get_page_from_freelist+0x70e/0x2370 (?:?) lock_release+0xc6/0x290 (?:?) do_raw_spin_unlock+0x9a/0x100 (?:?) kasan_unpoison+0x27/0x60 (?:?) __bfs+0x147/0x240 (?:?) get_page_from_freelist+0x83d/0x2370 (?:?) ocfs2_claim_suballoc_bits+0x38c/0xe70 (fs/ocfs2/suballoc.c:96) sched_domains_numa_masks_clear+0x70/0xd0 (?:?) check_irq_usage+0xe8/0xb70 (?:?) __ocfs2_claim_clusters+0x18d/0x4c0 (fs/ocfs2/suballoc.c:2497) check_path+0x24/0x50 (?:?) rcu_is_watching+0x20/0x50 (?:?) check_prev_add+0xfd/0xd00 (?:?) ocfs2_add_clusters_in_btree+0x17d/0x810 (fs/ocfs2/suballoc.c:?) __folio_batch_add_and_move+0x1f5/0x3d0 (?:?) ocfs2_add_inode_data+0xd9/0x120 (fs/ocfs2/suballoc.c:?) filemap_add_folio+0x105/0x1f0 (?:?) ocfs2_write_begin_nolock+0x29f7/0x2f80 (fs/ocfs2/suballoc.c:3043) ocfs2_read_inode_block+0xb5/0x110 (fs/ocfs2/suballoc.c:?) down_write+0xf5/0x180 (?:?) ocfs2_write_begin+0x180/0x240 (fs/ocfs2/suballoc.c:?) __mark_inode_dirty+0x758/0x9a0 (?:?) inode_to_bdi+0x41/0x90 (?:?) balance_dirty_pages_ratelimited_flags+0xf8/0x1d0 (?:?) generic_perform_write+0x252/0x440 (?:?) mnt_put_write_access_file+0x16/0x70 (?:?) file_update_time_flags+0xe4/0x200 (?:?) ocfs2_file_write_iter+0x80a/0x1320 (fs/ocfs2/suballoc.c:?) lock_acquire+0x184/0x2f0 (?:?) ksys_write+0xd2/0x170 (?:?) apparmor_file_permission+0xf5/0x310 (?:?) read_zero+0x8d/0x140 (?:?) lock_is_held_type+0x8f/0x100 (?:?)

In the Linux kernel, the following vulnerability has been resolved: fbdev: fbcon: fix out-of-bounds read in err_out of fbcon_do_set_font() When fbcon_do_set_font() fails (e.g., due to a memory allocation failure inside vc_resize() under heavy memory pressure), it jumps to the `err_out` label to roll back the console state. However, the current rollback logic forgets to restore the `hi_font` state, leading to a severe state machine corruption. Earlier in the function, `set_vc_hi_font()` might be called to change `vc->vc_hi_font_mask` and mutate the screen buffer. If `vc_resize()` subsequently fails, the `err_out` path restores `vc_font.charcount` but entirely skips rolling back the `vc_hi_font_mask` and the screen buffer. This mismatch leaves the terminal in a desynchronized state. Because `vc_hi_font_mask` remains set, the VT subsystem will still accept character indices greater than 255 from userspace and write them to the screen buffer. Subsequent rendering calls (e.g., `fbcon_putcs()`) will then use these inflated indices to access the reverted, 256-character font array, leading to a deterministic out-of-bounds read and potential kernel memory disclosure. Fix this by adding the missing rollback logic for the `hi_font` mask and screen buffer in the error path.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds read in smb_check_perm_dacl() The permission-check ACE walk in smb_check_perm_dacl() validates the ACE header size and caps sid.num_subauth at SID_MAX_SUB_AUTHORITIES, but it never checks that ace->size is actually large enough to contain num_subauth sub-authorities before compare_sids() dereferences them. CIFS_SID_BASE_SIZE covers the SID header up to but excluding the sub_auth[] array, and offsetof(struct smb_ace, sid) is the ACE header, so the existing guards only guarantee the 8-byte SID base, i.e. zero sub-authorities. compare_sids() then reads ace->sid.sub_auth[i] for i < min(local_sid->num_subauth, ace->sid.num_subauth). The local comparison SIDs (sid_everyone, sid_unix_NFS_mode, and the id_to_sid() result) always have at least one sub-authority, and an attacker controls the ACE revision and authority bytes (which lie within the in-bounds SID base), so they can match one of those SIDs and force the sub_auth read. A crafted ACE with size == 16 and num_subauth >= 1 placed at the tail of the security descriptor therefore causes a heap out-of-bounds read of up to SID_MAX_SUB_AUTHORITIES * sizeof(__le32) bytes past the pntsd allocation. The security descriptor is loaded by ksmbd_vfs_get_sd_xattr() into a buffer sized exactly to the on-disk data (kzalloc(sd_size) in ndr_decode_v4_ntacl()), so the read lands past the allocation. The malformed descriptor can be stored verbatim via SMB2_SET_INFO (the DACL is not normalised before being written to the security.NTACL xattr) and the read fires on a subsequent SMB2_CREATE access check, making this reachable by an authenticated client on a share that uses ACL xattrs. Add the missing num_subauth-versus-ace_size check, mirroring the identical guards already present in the sibling parsers parse_dacl() and smb_inherit_dacl().

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vce: Prevent partial address patches In the case that only one of lo/hi is valid, the patching could result in a bad address written to in FW.

YAML::Syck versions before 1.47 for Perl allow an out-of-bounds read via an unbounded newline scan in newline_len. In the bundled libsyck newline_len and is_newline dereference the scan pointer, and the following byte for a "\r\n" pair, with no NUL-terminator or bounds check. During block-scalar lexing at a document boundary the scan runs one byte past the heap lexer buffer. This is an incomplete fix of CVE-2025-11683, on a lexer path the earlier fix did not cover. Any caller that runs Load or LoadFile on an untrusted document with a block scalar at a document boundary reaches the over-read.