Home / CVEs

CVE Database

Published vulnerabilities with severity, known exploitation and official sources.

560 result(s)

Export this search: RSS · CSV · STIX

CVE-2026-100885 High · 7.3 CWE-285 Sep 27, 2026

Krayin laravel-crm admin-config-setup API Endpoint CanInstall.php authorization

A vulnerability was found in Krayin laravel-crm up to 2.2.4. This affects an unknown function of the file packages/Webkul/Installer/src/Http/Middleware/CanInstall.php of the component admin-config-setup API Endpoint. The manipulation results in authorization bypass. The attack may be launched remotely. The exploit has been made public and could be used. Upgrading to version 2.2.5 mitigates this issue. The patch is identified as 89f2916b6a46ff91bd1999ce38158fa0de8b9490. Upgrading the affected component is recommended.

CVE-2026-100878 Medium · 6.3 CWE-285 Sep 27, 2026

zhistaredu StarTraining authRole Endpoint SysUser.java SysUser.isAdmin authorization

A vulnerability was identified in zhistaredu StarTraining up to 3.8.1. Affected by this issue is the function SysUser.isAdmin of the file edu-common/src/main/java/com/edu/common/core/domain/entity/SysUser.java of the component authRole Endpoint. The manipulation of the argument userId/roleIds leads to authorization bypass. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

CVE-2025-71426 High · 7.1 CWE-285 Sep 26, 2026

Contrast before 1.4.1 Coordinator Impersonation via Unauthenticated Recovery

Contrast is a confidential-computing runtime for Kubernetes. In versions before 1.4.1, a recovering Coordinator does not verify the seed supplied by the recovering party. An attacker can therefore stand up a rogue Coordinator whose manifest passes validation but whose secret seed is attacker-controlled. If network traffic is redirected from the legitimate Coordinator to the attacker's Coordinator, a workload owner can be impersonated when they either set a new manifest without comparing the returned root CA certificate against the existing one (the default behavior of the contrast CLI) or verify the Coordinator without comparing the root CA certificate against a trusted reference. Under these conditions the attacker can issue certificates that chain back to the rogue Coordinator's root CA and recover arbitrary workload secrets of workloads deployed after the attack. Secrets of the legitimate Coordinator (seed, workload secrets, CA), workload integrity, and certificates chaining to the mesh CA are not affected.

CVE-2026-55217 Medium · 5.3 CWE-285 Sep 25, 2026

GLPI: Unallowed modfication of knowbase items comments and translations

GLPI is a free asset and IT management software package. From 0.85 until 10.0.26 and 11.0.8, a low-privileged authenticated user can create, update, or delete knowledge base comments and translations without the required authorization for the affected content. This issue is fixed in versions 11.0.8 and 10.0.26.

CVE-2026-53628 Medium · 5.9 CWE-285 Sep 25, 2026

GLPI: Unallowed authentication method update by administrator

GLPI is a free asset and IT management software package. From 0.84 until 10.0.26 and 11.0.8, an administrator holding the Update auth and sync or Update auth, sync and 2FA right can change the authentication method and disable two-factor authentication for user accounts outside the administrator's entity scope. The affected user-account administration flow did not consistently enforce the target user's entity-scoped update permission. This issue is fixed in versions 11.0.8 and 10.0.26.

CVE-2026-61837 Medium · 5.3 CWE-285 Sep 25, 2026

RabbitMQ: AMQP 1.0 management `GET /bindings` exposes full binding topology to any authenticated AMQP user without resource/management permission checks

RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.3.3, 4.2.9, 4.1.14, and 4.0.23, AMQP 1.0 management GET /bindings exposes full binding topology to any authenticated AMQP user without resource/management permission checks. the AMQP 1.0 HTTP-over-AMQP management endpoint GET /bindings (the rabbitamqpmanagement handler) enumerates bindings between an arbitrary source exchange and destination queue/exchange in the caller's virtual host without performing any resource-level permission check. Unlike every sibling operation in the same module (which call checkresourceaccess / bindingchecks), the GET handler ignores the authenticated User and returns the binding list unchanged. As a result, any authenticated AMQP 1.0 client that can open a management link pair , including users with no management/monitoring/policymaker/administrator tag , can enumerate the complete binding topology (source exchanges, destination queues/exchanges, routing keys, and binding arguments) of the virtual host they can access. The equivalent HTTP management API (GET /api/bindings) Confidentiality impact: a non-management AMQP 1.0 user can enumerate the complete routing topology of any virtual host it can connect to , every (source exchange, destination queue/exchange, routing key, binding arguments) This issue is fixed in versions 4.3.3, 4.2.9, 4.1.14, and 4.0.23.

CVE-2026-96448 Medium · 6.6 CWE-285 Sep 25, 2026

Keycloak-services: keycloak-services: fgap v2 composite-blind role mapping allows privilege escalation

A flaw was found in the Fine-Grained Admin Permissions (FGAP v2) feature of Keycloak, an identity and access management solution. The issue occurs when the system checks if a delegated administrator has permission to assign a specific role to a user. Because the check does not look inside composite roles to see what other permissions they contain, an administrator with limited rights can assign a role that secretly includes full administrative control. This allows the attacker to gain complete management access over the entire realm.

CVE-2026-92799 Medium · 5.3 CWE-285 Sep 25, 2026

Online Scheduling and Appointment Booking System <= 28.2 - Unauthenticated Authorization Bypass via PHP Type Juggling via 'verification_code' Parameter Type Juggling via json_data

The Online Scheduling and Appointment Booking System – Bookly plugin for WordPress is vulnerable to Authorization Bypass via PHP Type Juggling in all versions up to, and including, 28.2. This is due to the `postValidateCustomer()` function using a loose PHP inequality operator (`!=`) to compare the session-stored one-time verification code against the attacker-supplied `verification_code` parameter — a flaw that is further exposed by the booking AJAX controller registering all its methods as `wp_ajax_nopriv_` handlers and unconditionally overriding `csrfTokenValid()` to return true, leaving the endpoint both unauthenticated and CSRF-unprotected. This makes it possible for unauthenticated attackers to bypass the phone/email ownership verification step and overwrite the name, email, phone, and address fields of any arbitrary existing Bookly customer record, redirecting that customer's booking notifications to attacker-controlled contact details. The bypass is achievable because the `json_data` input channel decodes input via `json_decode()`, which preserves real PHP types and causes the `wp_kses` filter to leave non-string values such as the JSON boolean `true` untouched; submitting `true` as the `verification_code` satisfies the loose comparison against the session's non-zero integer code (generated by `mt_rand(100000, 999999)`), causing `true != <non-zero int>` to evaluate as `false` and the guard to be bypassed.

CVE-2026-97721 Low · 2.7 CWE-285 Sep 25, 2026

Sanluan PublicCMS exportExcel/exportData SysUserAdminController.java CmsContentAdminController authorization

A weakness has been identified in Sanluan PublicCMS up to 6.202506.e. This vulnerability affects the function CmsContentAdminController of the file publiccms-parent/publiccms-core/src/main/java/com/publiccms/controller/admin/sys/SysUserAdminController.java of the component exportExcel/exportData. This manipulation of the argument userId/deptId causes authorization bypass. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

CVE-2026-97647 Medium · 5.3 CWE-285 Sep 24, 2026

ningzichun student-management-system editLog.php authorization

A security vulnerability has been detected in ningzichun student-management-system up to 98760f5711cf6dc8b4adca53a9e207ca49b02ebf. This impacts an unknown function of the file user/editLog.php. Such manipulation of the argument sid/addtime/type/reason/detail/logdate leads to authorization bypass. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet.

CVE-2026-97646 High · 7.3 CWE-285 Sep 24, 2026

ningzichun student-management-system getStudent.php authorization

A weakness has been identified in ningzichun student-management-system up to 98760f5711cf6dc8b4adca53a9e207ca49b02ebf. This affects an unknown function of the file admin/fun/getStudent.php. This manipulation of the argument sid causes authorization bypass. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

CVE-2026-97368 Medium · 6.3 CWE-285 Sep 24, 2026

chillzhuang SpringBlade user-auth-info Endpoint UserServiceImpl.java UserServiceImpl.userInfo authorization

A weakness has been identified in chillzhuang SpringBlade up to 5.0.2. This affects the function UserServiceImpl.userInfo of the file blade-service/blade-system/src/main/java/org/springblade/system/service/impl/UserServiceImpl.java of the component user-auth-info Endpoint. This manipulation of the argument userId causes authorization bypass. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. CVE-2026-56100 and CVE-2026-36765 are distinct issues. The vendor was contacted early about this disclosure but did not respond in any way.

CVE-2026-61604 Critical · 9.3 CWE-285 Sep 24, 2026

ixo Blockchain x/bonds DID-resolved payer drain + x/entity ICA authorization bypass

The ixo Blockchain is a Layer 1 blockchain that runs on both Testnet and Mainnet. Prior to version 8.0.0, the x/bonds module moved funds from an address that was resolved from a DID verification method, without verifying that the resolved address belonged to the transaction signer. Affected handlers included MsgMakeOutcomePayment, MsgBuy, MsgSell, MsgSwap, and MsgWithdrawShare, as well as the batch order processor. Because any account may list an arbitrary blockchainAccountID as a verification method on a DID it controls (without the consent of that address's owner), an attacker could register victims' addresses as verification methods on their own DID and then move the victims' balances into a bond the attacker controlled — later withdrawing and bridging the proceeds off-chain. This was exploited on ixo mainnet (ixo-5) on 2026-06-20. The attack required no victim keys, signatures, or system compromise — any account holding a balance in a token a bond could use was at risk. This was fixed in v8.0.0, delivered via the on-chain v8 software-upgrade. The x/bonds module is disabled: every bonds message is rejected on all routes (top-level, authz, CosmWasm, and ICA), and the bonds batch EndBlocker is a no-op so no further reserve movements can occur. All node operators and validators must upgrade to v8.0.0. The flaw is in chain state-machine logic and can only be remediated by running the patched binary. There is no application-level workaround. The vulnerability is in consensus logic; remediation requires the network to run the patched (v8.0.0) binary. The bonds module remains disabled in v8.0.0 and will only be re-enabled in a future release once the signer-authorization model has been corrected.

CVE-2026-96762 High · 7.3 CWE-285 Sep 23, 2026

kvcache-ai mooncake RPC Path UnmountSegment authorization

A vulnerability was determined in kvcache-ai mooncake up to 0.3.12/0.3.13.post1. This affects the function UnmountSegment of the component RPC Path Handler. This manipulation of the argument client_id/segment_id causes authorization bypass. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

CVE-2026-16346 Critical · 9.9 CWE-285 Sep 22, 2026

DataStage on Cloud Pak for Data has several vulnerabilities

IBM DataStage on Cloud Pak for Data 5.4.0.0 could allow a remote authenticated attacker to execute arbitrary commands due to improper neutralization of special elements used in an OS command.

CVE-2026-83805 Medium · 6.4 CWE-285 Sep 22, 2026

Nautobot: Authorization bypass in approval workflow REST API allows self-approval and unauthorized activation of scheduled jobs

Nautobot is a Network Source of Truth and Network Automation Platform. From 3.0.0 until 3.1.8, the generic ApprovalWorkflowStageResponse create endpoint does not enforce approver-group membership, change permission on the object under review, or the one-response-per-user restriction applied by the intended approve and deny actions. A user with only extras.add_approvalworkflowstageresponse can submit approved responses directly, while writable user and state fields permit responses to be attributed to arbitrary users. These forged responses can satisfy min_approvers, approve the workflow, and activate its gated ScheduledJob without a legitimate approver. This issue is fixed in version 3.1.8.

CVE-2026-95805 Medium · 5.3 CWE-285 Sep 22, 2026

MISP ACLComponent: Typo in previewEventAttributes ACL key bypasses intended access restriction

A typo in the MISP ACLComponent access control configuration caused the ACL rule for the previewEventAttributes action to reference the permission string 'theming_enabled*' (with a trailing asterisk) instead of the correct 'theming_enabled'. In the MISP ACL system, the array values define which role or permission grants access to a given controller action. The adjacent entry previewEventObjects correctly uses ['theming_enabled'], confirming the intended restriction. The malformed key 'theming_enabled*' does not match any valid permission identifier, causing the access control check for previewEventAttributes to malfunction. Depending on the ACL evaluation logic, this could result in either unauthorized users gaining access to the previewEventAttributes endpoint (authorization bypass) or legitimate users being denied access (availability impact). The previewEventAttributes endpoint exposes event attribute data within MISP so an authorization bypass could expose sensitive indicator and attribute data to users who should not have access.

CVE-2026-95754 Medium · 6.9 CWE-285 Sep 22, 2026

MISP: Disabled-user check ineffective in pre-authentication TOTP login branch

In MISP's UsersController login() method, the pre-authentication database query used for the TOTP (two-factor authentication) verification branch did not include the User.disabled column in its SELECT fields list. The query selected only User.password, User.totp, and User.hotp_counter. When the TOTP branch subsequently accessed $unauth_user['User']['disabled'], the key was absent from the result set, producing a PHP 'Undefined array key' warning and causing the expression to evaluate as null (falsy). As a result, the disabled-user guard in the TOTP branch was effectively a no-op: a disabled, TOTP-enrolled user could proceed to the TOTP verification step rather than being rejected at that point. The commit message explicitly states this was 'harmless in practice' because the subsequent identify() call re-validates the user and would still reject a disabled account. The practical security impact is therefore minimal, limited to a very small information-disclosure difference in the login response (a TOTP prompt is presented instead of an immediate rejection) and a PHP warning in application logs.

CVE-2026-95671 Medium · 5.3 CWE-285 Sep 22, 2026

MISP Collections: Missing Authorization Check for Sharing Group on PUT Request in collections/add

In MISP, the CollectionsController add() method enforced the sharing-group usability authorization check and element capture only when the HTTP request method was POST. However, the underlying CRUDComponent::add() method persists data on both POST and PUT requests. As a result, an authenticated user could issue a PUT request to the collections/add endpoint, bypassing the sharing-group authorization check entirely. This allowed the creation of a collection with distribution=4 (shared with a specific sharing group) targeting a sharing group that the user was not authorized to use. The bypassed check would normally verify that the current user has access to the specified sharing group before allowing the collection to be associated with it. The security impact is that an authenticated user can place collection data into a sharing group context they do not have legitimate access to, potentially exposing that data to all members of the unauthorized sharing group and violating the intended access-control boundaries of the MISP instance. The vulnerability requires an authenticated session and knowledge of a valid sharing group identifier; no user interaction or special tooling is needed beyond sending a PUT request instead of a POST request to the same endpoint.

CVE-2026-25254 Critical · 9.8 CWE-285 Sep 22, 2026

Improper authorization in Qualcomm Software Center

Improper authorization leads to Remote Code Execution via SocketIO interface.

CVE-2026-79917 Medium · 6.5 CWE-285 Sep 21, 2026

MaxKB: Chat share-link endpoint missing owner check: a chat token can publish another user's conversation

MaxKB is an open-source AI assistant for enterprise. In 2.7.0 through 2.10.4-lts, POST /chat/api/{application_id}/chat/{chat_id}/share_chat verifies that a conversation exists but does not verify that it belongs to the authenticated chat_user_id or to the application bound to the caller's token. An attacker with any chat token and a known victim chat_id can create an unauthenticated public ChatShareLink exposing the victim's conversation and can create PublicFileAccess state that makes associated files retrievable without credentials, with no available revoke path. No fixed version is available as of this review.

CVE-2026-63330 High · 7.7 CWE-285 Sep 21, 2026

Warpgate: Missing Admin Authorization on Live Recording Stream WebSocket Allows Any Authenticated User to Eavesdrop on Terminal Sessions

Warpgate is an open source SSH, HTTPS and MySQL bastion host for Linux. Prior to 0.25.6, api_get_recording_stream in warpgate-admin/src/api/recordings_detail.rs protects /@warpgate/admin/api/recordings/{uuid}/stream only with session authentication and omits require_admin_permission for AdminPermission::RecordingsView. Any authenticated regular user who identifies an active recording can subscribe to its WebSocket and receive real-time terminal input and output from proxied SSH, MySQL, or PostgreSQL sessions, including credentials, commands, and other sensitive data belonging to users and administrators. This issue is fixed in version 0.25.6.

CVE-2026-94152 Medium · 4.3 CWE-285 Sep 21, 2026

Omega Solution FBP Fulfillment by People User Profile API user authorization

A security vulnerability has been detected in Omega Solution FBP Fulfillment by People 2025. This impacts an unknown function of the file /user/ of the component User Profile API. The manipulation of the argument ID leads to authorization bypass. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

CVE-2026-93955 Medium · 4.3 CWE-285 Sep 19, 2026

grimmory-tools grimmory Download Endpoint KoboController.java streamFileToResponse authorization

A vulnerability was detected in grimmory-tools grimmory up to 3.3.3/3.4.1. Affected by this vulnerability is the function streamFileToResponse of the file backend/src/main/java/org/booklore/controller/KoboController.java of the component Download Endpoint. Performing a manipulation of the argument bookId results in authorization bypass. The attack may be initiated remotely. The exploit is now public and may be used. Issue #2431 is closed as completed, but its only comment states that the issue “has already been reported elsewhere.” No fixing commit or pull request is identified there.

CVE-2026-93954 Medium · 4.3 CWE-285 Sep 19, 2026

grimmory-tools grimmory Settings API Endpoint AppSettingController.java AppSettingController.getAppSettings authorization

A security vulnerability has been detected in grimmory-tools grimmory up to 3.3.3/3.4.1. Affected is the function AppSettingController.getAppSettings of the file backend/src/main/java/org/booklore/controller/AppSettingController.java of the component Settings API Endpoint. Such manipulation leads to incorrect authorization. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The name of the patch is 2b66ca6df8110f6b512e030b54c16b9fbe318f17. Applying a patch is advised to resolve this issue. PR #2558, merged as 53abc8b, moved the OIDC secret into a dedicated setting, but did not by itself restrict GET /api/v1/settings.