Home / CVEs
CVE Database
Published vulnerabilities with severity, known exploitation and official sources.
CVE-2026-107674
Medium · 5.1
CWE-667 Oct 16, 2026
IBM i is Affected by a Denial of Service in Digital Certificate Manager
IBM i 7.3, 7.4, 7.5, and 7.6 is vulnerable to a denial of service to Digital Certificate Manager (DCM) for System TLS using applications attempting to create secure network connections. A bad actor could use this to prevent a service from starting or cause it to fallback to non-secure connections.
CVE-2026-103670
High · 7.5
CWE-667 Oct 6, 2026
Gitea trusted workflow cancellation by unapproved fork runs
When a Gitea Actions run was inserted, older runs in the same workflow-level concurrency group were cancelled without checking whether the new run still needed approval. Because fork pull request runs are inserted under the base repository, a user who can open a pull request from a fork could cancel trusted in-progress runs that share a concurrency group with `cancel-in-progress` enabled, without approval and without running any code. On self-hosted runners this can interrupt deployments and leave partial state behind.
CVE-2026-105113
Medium · 6.5
CWE-667 Oct 3, 2026
Nezha 1.8.0 before 2.3.13 Denial of Service via Notification Mutex Deadlock
Nezha Dashboard from 1.8.0 before 2.3.13 contains an improper locking vulnerability where a non-deferred mutex unlock leaks on a nil-map panic path. Any authenticated non-admin member can issue four notification API calls to permanently deadlock the alerting subsystem, then exhaust memory with blocking requests.
CVE-2026-47581
Medium · 5.5
CWE-667 Sep 30, 2026
NVIDIA GPU Display Driver for Windows contains a vulnerability in the kernel module…
NVIDIA GPU Display Driver for Windows contains a vulnerability in the kernel module where a user could cause improper locking. A successful exploit of this vulnerability might lead to denial of service.
CVE-2026-80126
Medium · 6.5
CWE-667 Sep 7, 2026
Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application…
Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Locking vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to filesystem access for attacker.
CVE-2026-64429
Medium · 5.5
CWE-667 Jul 25, 2026
gpio: eic-sprd: use raw_spinlock_t in the irq startup path
In the Linux kernel, the following vulnerability has been resolved:
gpio: eic-sprd: use raw_spinlock_t in the irq startup path
sprd_eic_irq_unmask() enables the GPIO IRQ and then updates controller
state through sprd_eic_update(), which takes sprd_eic->lock with
spin_lock_irqsave(). The callback can be reached from irq_startup()
while setting up a requested IRQ. That path is not sleepable, but on
PREEMPT_RT a regular spinlock_t becomes a sleeping lock.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the request_threaded_irq() -> __setup_irq() ->
irq_startup() -> sprd_eic_irq_unmask() -> sprd_eic_update() carrier and
used the original spin_lock_irqsave(&sprd_eic->lock) edge. Lockdep
BUG: sleeping function called from invalid context
hardirqs last disabled at ... __setup_irq.constprop.0 ... [vuln_msv]
sprd_rt_spin_lock_irqsave+0x1c/0x30 [vuln_msv]
sprd_eic_update.constprop.0+0x48/0x90 [vuln_msv]
sprd_eic_irq_unmask.constprop.0+0x35/0x50 [vuln_msv]
__setup_irq.constprop.0+0xd/0x30 [vuln_msv]
Convert the Spreadtrum EIC controller lock to raw_spinlock_t. The
locked section only serializes MMIO register updates and does not contain
sleepable operations, so keeping it non-sleeping is appropriate for the
irqchip callbacks.
CVE-2026-64415
Medium · 5.5
CWE-667 Jul 25, 2026
mm/swap: add cond_resched() in swap_reclaim_full_clusters to prevent softlockup
In the Linux kernel, the following vulnerability has been resolved:
mm/swap: add cond_resched() in swap_reclaim_full_clusters to prevent softlockup
We hit a real softlockup in an internal stress test environment. The
workload was LTP memory/swap stress on a large arm64 machine, with 320
CPUs, about 1TB memory and an 8.6GB swap device. The system was under
heavy load and the swap device had a large number of full clusters. The
softlockup was triggered during a stress test after about 3 days.
So, add periodic cond_resched() calls during large full_clusters
reclaim operations to prevent softlockup issues.
Detailed call trace as follow:
PID: 3817773 TASK: ffff0883bb28b780 CPU: 48 COMMAND: "kworker/48:7"
#0 [ffff800080183d10] __crash_kexec at ffffa4c1361e5de4
#1 [ffff800080183d90] panic at ffffa4c1360d5e9c
#2 [ffff800080183e20] watchdog_timer_fn at ffffa4c136231fa8
...
#16 [ffff8000c4ad3cb0] swap_cache_del_folio at ffffa4c1363e1614
#17 [ffff8000c4ad3ce0] __try_to_reclaim_swap at ffffa4c1363e4bfc
#18 [ffff8000c4ad3d40] swap_reclaim_full_clusters at ffffa4c1363e5474
#19 [ffff8000c4ad3da0] swap_reclaim_work at ffffa4c1363e550c
#20 [ffff8000c4ad3dc0] process_one_work at ffffa4c136102edc
#21 [ffff8000c4ad3e10] worker_thread at ffffa4c136103398
#22 [ffff8000c4ad3e70] kthread at ffffa4c13610d95c
CVE-2026-64374
High · 7.5
CWE-667 Jul 25, 2026
sched/rt: Have RT_PUSH_IPI be default off for non PREEMPT_RT
In the Linux kernel, the following vulnerability has been resolved:
sched/rt: Have RT_PUSH_IPI be default off for non PREEMPT_RT
RT migration is done aggressively. When a CPU schedules out a high
priority RT task for a lower priority task, it will look to see if there's
any RT tasks that are waiting to run on another CPU that is of higher
priority than the task this CPU is about to run. If it finds one, it will
pull that task over to the CPU and allow it to run there instead.
Normally, this pulling is done by looking at the RT overloaded mask (rto)
which contains all the CPUs in the scheduler domain with RT tasks that are
waiting to run due to a higher priority RT task currently running on their
CPU. The CPU that is about to schedule a lower priority task will grab the
rq lock of the overloaded CPU and move the RT task from that CPU's runqueue
to the local one and schedule the higher priority RT task.
This caused issues when a lot of CPUs would schedule a lower priority task
at the same time. They would all try to grab the same runqueue lock of
the CPU with the overloaded RT tasks. Only the first CPU that got in will
get that task. All the others would wait until they got the runqueue lock
and see there's nothing to pull and do nothing. On systems with lots of
CPUs, this caused a large latency (up to 500us) which is beyond what
PREEMPT_RT is to allow.
The solution to that was to create an RT_PUSH_IPI logic. When any CPU
wanted to pull a task, instead of grabbing the runqueue lock of the
overloaded CPU, it would start by sending an IPI to the overloaded CPU,
and that IPI handler would have the CPU with the waiting RT task do a push
instead. Then that handler would send an IPI to the next CPU with
overloaded RT tasks, and so on. Note, after the first CPU starts this
process, if another CPU wanted to do a pull, it would see that the process
has already begun and would only increment a counter to have the IPIs
continue again.
The RT_PUSH_IPI solved the latency problem with PREEMPT_RT but could cause
a new issue with non PREEMPT_RT. Namely, softirqs run in a threaded
context on PREEMPT_RT but they can run in an interrupt context in non-RT.
If an IPI lands on a CPU that has just woken up multiple RT tasks and the
current CPU is running a non RT or a low priority RT task, instead of
doing a push, it would simply do a schedule on that CPU. But if a softirq
was also executing on this CPU, the schedule would need to wait until the
softirq finished. Until then, the CPU would still be considered overloaded
as there are RT tasks still waiting to run on it.
A live lock occurred on a workload that was doing heavy networking traffic
on a large machine where the softirqs would run 500us out of 750us. And it
would also be waking up RT tasks, causing the RT pull logic to be
constantly executed.
When a softirq triggered on a CPU with RT tasks queued but not running
yet, and the other CPUs would see this CPU as being overloaded, they would
send an IPI over to it. The CPU would notice that the waiting RT tasks are
of higher priority than the currently running task and simply schedule
that CPU instead. But because the softirq was executing, before it could
schedule, it would receive another IPI to do the same. The amount of IPIs
would slow down the currently running softirq so much that before it could
return back to task context, it would execute another softirq never
allowing the CPU to schedule. This live locked that CPU.
As RT_PUSH_IPI was created to help PREEMPT_RT, make it default off if
PREEMPT_RT is not enabled.
CVE-2026-64347
Medium · 5.5
CWE-667 Jul 25, 2026
usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler
The OTG branch of composite_setup() falls back to the first
configuration when none is selected:
if (cdev->config)
config = cdev->config;
else
config = list_first_entry(&cdev->configs,
struct usb_configuration, list);
if (!config)
goto done;
...
memcpy(req->buf, config->descriptors[0], value);
list_first_entry() never returns NULL. On an empty list it returns
container_of() of the list head. So the "if (!config)" check is dead.
When cdev->configs is empty, config points at the head inside struct
usb_composite_dev. config->descriptors[0] reads whatever sits at that
offset. The memcpy copies up to w_length bytes of it into the response
buffer.
cdev->configs can be empty in two cases. One is a teardown race on
gadget unbind with a control transfer in flight. The other is a driver
that sets is_otg before it adds a config. A reproducer that holds
cdev->configs empty triggers a KASAN fault in this branch.
Use list_first_entry_or_null() so the existing check does its job.
CVE-2026-64334
Medium · 5.5
CWE-667 Jul 25, 2026
USB: serial: digi_acceleport: fix hard lockup on disconnect
In the Linux kernel, the following vulnerability has been resolved:
USB: serial: digi_acceleport: fix hard lockup on disconnect
If submitting the OOB write urb fails persistently (e.g if the device is
being disconnected) the driver would loop indefinitely with interrupts
disabled.
Check for urb submission errors when sending OOB commands to avoid
hanging if, for example, open(), set_termios() or close() races with a
physical disconnect.
This is issue was flagged by Sashiko when reviewing an unrelated change
to the driver.
CVE-2026-64238
Medium · 5.5
CWE-667 Jul 24, 2026
gpio: shared: fix deadlock on shared proxy's parent removal
In the Linux kernel, the following vulnerability has been resolved:
gpio: shared: fix deadlock on shared proxy's parent removal
Commit 710abda58055 ("gpio: shared: call gpio_chip::of_xlate() if set")
used the mutex embedded in struct gpio_shared_entry to protect the
offset field which now can be modified after assignment. The critical
section however is too wide and introduced a potential deadlock on the
removal of the shared GPIO proxy's parent.
Make the critical section shorter - only protect the offset when it's
being read.
While at it: mention the fact that the entry lock is now also used to
protect against concurrent access to the offset field in the structure's
documentation.
CVE-2026-64171
Medium · 5.5
CWE-667 Jul 19, 2026
i2c: tegra: fix pm_runtime leak on mutex_lock failure
In the Linux kernel, the following vulnerability has been resolved:
i2c: tegra: fix pm_runtime leak on mutex_lock failure
If tegra_i2c_mutex_lock() fails, the function returns without calling
pm_runtime_put(), leaking the runtime PM reference acquired by the
preceding pm_runtime_get_sync(). This prevents the device from ever
entering runtime suspend.
Add the missing pm_runtime_put() before returning on lock failure.
CVE-2026-64100
Medium · 5.5
CWE-667 Jul 19, 2026
drm/msm: Fix shrinker deadlock
In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix shrinker deadlock
With PROVE_LOCKING on an Snapdragon X1 and VM reclaim pressure, we see:
======================================================
WARNING: possible circular locking dependency detected
7.0.0-debug+ #43 Tainted: G W
------------------------------------------------------
kswapd0/82 is trying to acquire lock:
ffff800080ec3870 (reservation_ww_class_acquire){+.+.}-{0:0}, at: msm_gem_shrinker_scan+0x17c/0x400 [msm]
but task is already holding lock:
ffffc31709b263b8 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x88/0x988
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (fs_reclaim){+.+.}-{0:0}:
__lock_acquire+0x4d0/0xad0
lock_acquire.part.0+0xc4/0x248
lock_acquire+0x8c/0x248
fs_reclaim_acquire+0xd0/0xf0
dma_resv_lockdep+0x224/0x348
do_one_initcall+0x84/0x5d0
do_initcalls+0x194/0x1d8
kernel_init_freeable+0x128/0x180
kernel_init+0x2c/0x160
ret_from_fork+0x10/0x20
-> #1 (reservation_ww_class_mutex){+.+.}-{4:4}:
__lock_acquire+0x4d0/0xad0
lock_acquire.part.0+0xc4/0x248
lock_acquire+0x8c/0x248
dma_resv_lockdep+0x1a8/0x348
do_one_initcall+0x84/0x5d0
do_initcalls+0x194/0x1d8
kernel_init_freeable+0x128/0x180
kernel_init+0x2c/0x160
ret_from_fork+0x10/0x20
-> #0 (reservation_ww_class_acquire){+.+.}-{0:0}:
check_prev_add+0x114/0x790
validate_chain+0x594/0x6f0
__lock_acquire+0x4d0/0xad0
lock_acquire.part.0+0xc4/0x248
lock_acquire+0x8c/0x248
drm_gem_lru_scan+0x1ac/0x440
msm_gem_shrinker_scan+0x17c/0x400 [msm]
do_shrink_slab+0x150/0x4a0
shrink_slab+0x144/0x460
shrink_one+0x9c/0x1b0
shrink_many+0x27c/0x5c0
shrink_node+0x344/0x550
balance_pgdat+0x2c0/0x988
kswapd+0x11c/0x318
kthread+0x10c/0x128
ret_from_fork+0x10/0x20
other info that might help us debug this:
Chain exists of:
reservation_ww_class_acquire --> reservation_ww_class_mutex --> fs_reclaim
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(reservation_ww_class_mutex);
lock(fs_reclaim);
lock(reservation_ww_class_acquire);
*** DEADLOCK ***
1 lock held by kswapd0/82:
#0: ffffc31709b263b8 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x88/0x988
stack backtrace:
CPU: 4 UID: 0 PID: 82 Comm: kswapd0 Tainted: G W 7.0.0-debug+ #43 PREEMPT(full)
Tainted: [W]=WARN
Hardware name: LENOVO 21BX0016US/21BX0016US, BIOS N3HET94W (1.66 ) 09/15/2025
Call trace:
show_stack+0x20/0x40 (C)
dump_stack_lvl+0x9c/0xd0
dump_stack+0x18/0x30
print_circular_bug+0x114/0x120
check_noncircular+0x178/0x198
check_prev_add+0x114/0x790
validate_chain+0x594/0x6f0
__lock_acquire+0x4d0/0xad0
lock_acquire.part.0+0xc4/0x248
lock_acquire+0x8c/0x248
drm_gem_lru_scan+0x1ac/0x440
msm_gem_shrinker_scan+0x17c/0x400 [msm]
do_shrink_slab+0x150/0x4a0
shrink_slab+0x144/0x460
shrink_one+0x9c/0x1b0
shrink_many+0x27c/0x5c0
shrink_node+0x344/0x550
balance_pgdat+0x2c0/0x988
kswapd+0x11c/0x318
kthread+0x10c/0x128
ret_from_fork+0x10/0x20
kswapd0 holding fs_reclaim calls the MSM shrinker, which calls
dma_resv_lock. This in turn acquires fs_reclaim.
Fix this deadlock by using dma_resv_trylock() instead, dropping the
subsequently unused passed wait-wound lock 'ticket'.
Patchwork: https://patchwork.freedesktop.org/patch/723564/
[rob: fixup compile errors, replace lockdep splat with somethin
---truncated---
CVE-2026-64098
High · 7.8
CWE-667 Jul 19, 2026
drm/virtio: use uninterruptible resv lock for plane updates
In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: use uninterruptible resv lock for plane updates
virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock
the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and
ignore its return value. The function can fail with -EINTR from
dma_resv_lock_interruptible() (signal during lock wait) or with
-ENOMEM from dma_resv_reserve_fences() (fence slot allocation),
leaving the resv lock not held. The queue path then walks the object
array and calls dma_resv_add_fence(), which requires the lock held;
with lockdep enabled this trips dma_resv_assert_held():
WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840
Call Trace:
virtio_gpu_array_add_fence
virtio_gpu_queue_ctrl_sgs
virtio_gpu_queue_fenced_ctrl_buffer
virtio_gpu_cursor_plane_update
drm_atomic_helper_commit_planes
drm_atomic_helper_commit_tail
commit_tail
drm_atomic_helper_commit
drm_atomic_commit
drm_atomic_helper_update_plane
__setplane_atomic
drm_mode_cursor_universal
drm_mode_cursor_common
drm_mode_cursor_ioctl
drm_ioctl
__x64_sys_ioctl
Beyond the WARN, mutating the dma_resv fence list without the lock
races with concurrent readers/writers and can corrupt the list.
Both call sites run inside the .atomic_update plane callback, which
DRM atomic helpers do not allow to fail (by the time it runs, the
commit has been signed off to userspace and there is no clean
rollback path). Moving the lock acquisition to .prepare_fb was
rejected because the broader lock scope deadlocks against other BO
locking paths in the same atomic commit.
Introduce virtio_gpu_lock_one_resv_uninterruptible() that uses
dma_resv_lock() instead of dma_resv_lock_interruptible(). This
eliminates the -EINTR failure mode -- the realistic syzbot trigger
-- without extending the lock hold across the commit. The helper
locks a single BO and rejects nents > 1 with -EINVAL; both fix
sites lock exactly one BO.
Use it from virtio_gpu_cursor_plane_update() and
virtio_gpu_resource_flush(); check the return value to handle the
remaining -ENOMEM case from dma_resv_reserve_fences() by freeing
the objs and skipping the plane update for that frame. The
framebuffer BOs touched here are not shared with other contexts
and lock contention is expected to be brief, so the loss of
signal-interruptibility is acceptable.
Other callers of virtio_gpu_array_lock_resv() (the ioctl paths)
continue to use the interruptible variant.
The bug was reported by syzbot, triggered via fault injection
(fail_nth) on the DRM_IOCTL_MODE_CURSOR path, which forces the
-ENOMEM branch in dma_resv_reserve_fences().
CVE-2026-64068
Critical · 9.8
CWE-667 Jul 19, 2026
netfs: Fix missing locking around retry adding new subreqs
In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix missing locking around retry adding new subreqs
Fix netfs_retry_read_subrequests() and netfs_retry_write_stream() to take
the appropriate lock when adding extra subrequests into
stream->subrequests.
CVE-2026-64067
Critical · 9.8
CWE-667 Jul 19, 2026
netfs: Fix missing barriers when accessing stream->subrequests locklessly
In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix missing barriers when accessing stream->subrequests locklessly
The list of subrequests attached to stream->subrequests is accessed without
locks by netfs_collect_read_results() and netfs_collect_write_results(),
and then they access subreq->flags without taking a barrier after getting
the subreq pointer from the list. Relatedly, the functions that build the
list don't use any sort of write barrier when constructing the list to make
sure that the NETFS_SREQ_IN_PROGRESS flag is perceived to be set first if
no lock is taken.
Fix this by:
(1) Add a new list_add_tail_release() function that uses a release barrier
to set the pointer to the new member of the list.
(2) Add a new list_first_entry_or_null_acquire() function that uses an
acquire barrier to read the pointer to the first member in a list (or
return NULL).
(3) Use list_add_tail_release() when adding a subreq to ->subrequests.
(4) Use list_first_entry_or_null_acquire() when initially accessing the
front of the list (when an item is removed, the pointer to the new
front iterm is obtained under the same lock).
CVE-2026-64062
Medium · 5.5
CWE-667 Jul 19, 2026
netfs: Fix potential deadlock in write-through mode
In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix potential deadlock in write-through mode
Fix netfs_advance_writethrough() to always unlock the supplied folio and to
mark it dirty if it isn't yet written to the end. Unfortunately, it can't
be marked for writeback until the folio is done with as that may cause a
deadlock against mmapped reads and writes.
Even though it has been marked dirty, premature writeback can't occur as
the caller is holding both inode->i_rwsem (which will prevent concurrent
truncation, fallocation, DIO and other writes) and ictx->wb_lock (which
will cause flushing to wait and writeback to skip or wait).
Note that this may be easier to deal with once the queuing of folios is
split from the generation of subrequests.
CVE-2026-64057
High · 7.8
CWE-667 Jul 19, 2026
afs: Fix the locking used by afs_get_link()
In the Linux kernel, the following vulnerability has been resolved:
afs: Fix the locking used by afs_get_link()
The afs filesystem in the kernel doesn't do locking correctly for symbolic
links. There are a number of problems:
(1) It doesn't do any locking around afs_read_single() to prevent races
between multiple ->get_link() calls, thereby allowing the possibility
of leaks.
(2) It doesn't use RCU barriering when accessing the buffer pointers
during RCU pathwalk.
(3) It can race with another thread updating the contents of the symlink
if a third party updated it on the server.
Fix this by the following means:
(0) Move symlink handling into its own file as this makes it more
complicated.
(1) Take the validate_lock around afs_read_single() to prevent races
between multiple ->get_link() calls.
(2) Keep a separate copy of the symlink contents with an rcu_head. This
is always going to be a lot smaller than a page, so it can be
kmalloc'd and save quite a bit of memory. It also needs a refcount
for non-RCU pathwalk.
(3) Split the symlink read and write-to-cache routines in afs from those
for directories.
(4) Discard the I/O buffer as soon as the write-to-cache completes as this
is a full page (plus a folio_queue).
(5) If there's no cache, discard the I/O buffer immediately after reading
and copying if there is no cache.
CVE-2026-64004
High · 7.8
CWE-667 Jul 19, 2026
net/iucv: fix locking in .getsockopt
In the Linux kernel, the following vulnerability has been resolved:
net/iucv: fix locking in .getsockopt
Mirror iucv_sock_setsockopt() and wrap the whole switch in
lock_sock()/release_sock(). The pre-existing SO_MSGLIMIT-only lock
becomes redundant and is removed.
Any AF_IUCV HIPER user can potentially crash the kernel by racing
recvmsg() with getsockopt(SO_MSGSIZE): the SO_MSGSIZE arm dereferences
iucv->hs_dev->mtu after iucv_sock_close() (called from the racing
recvmsg()) has set hs_dev to NULL, producing a NULL pointer dereference
oops.
CVE-2026-64005
High · 7.8
CWE-667 Jul 19, 2026
net/smc: Do not re-initialize smc hashtables
In the Linux kernel, the following vulnerability has been resolved:
net/smc: Do not re-initialize smc hashtables
INIT_HLIST_HEAD(&smc_v*_hashinfo.ht) are called after smc_nl_init(),
proto_register() and sock_register(). This can lead to smc_v*_hashinfo.ht
being reset even though hash entries already exist and are being used,
possibly resulting in a corrupted list.
Remove unnecessary and dangerous re-initialisation of smc_v*_hashinfo.ht in
smc_init(); it is implicitly initialised to zero anyhow. Add
HLIST_HEAD_INIT to the definitions for clarity.
CVE-2026-63989
Medium · 5.5
CWE-667 Jul 19, 2026
bridge: Fix sleep in atomic context in netlink path
In the Linux kernel, the following vulnerability has been resolved:
bridge: Fix sleep in atomic context in netlink path
Since the introduction of the netlink configuration path for bridge
ports in commit 25c71c75ac87 ("bridge: bridge port parameters over
netlink"), br_setport() was always called with the bridge lock held
around it. Back then this decision made sense: The bridge lock protects
the STP state of the bridge and its ports and at that time the function
only processed three STP related netlink attributes (cost, priority and
state).
Nowadays, br_setport() processes a lot more attributes and most of them
do not need the bridge lock:
* Bridge flags: Only require RTNL. Read locklessly by the data path.
Annotations can be added in net-next.
* FDB port flushing: Only requires the FDB lock.
* Multicast attributes: Only require the multicast lock.
* Group forward mask: Only requires RTNL. Read locklessly by the data
path. Annotations can be added in net-next.
* Backup port and NHID: Only require RTNL. Read locklessly by the data
path.
This is a problem as the bridge calls dev_set_promiscuity() when certain
bridge port flags change and this function can sleep since the commit
cited below, resulting in a splat such as [1].
Fix this by reducing the scope of the bridge lock and only take it when
processing the three STP related attributes that require it. This is
consistent with the multicast attributes where each attribute acquires
the multicast lock instead of having one critical section for all
relevant attributes.
[1]
BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 356, name: bridge
preempt_count: 201, expected: 0
RCU nest depth: 0, expected: 0
2 locks held by bridge/356:
#0: ffffffff919473a0 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg (net/core/rtnetlink.c:80 net/core/rtnetlink.c:7002)
#1: ffff888115072d58 (&br->lock){+...}-{3:3}, at: br_setlink (./include/linux/spinlock.h:348 net/bridge/br_netlink.c:1117)
Preemption disabled at:
0x0
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
__might_resched.cold (kernel/sched/core.c:9163)
netif_rx_mode_run (net/core/dev_addr_lists.c:1262)
netif_rx_mode_sync (net/core/dev_addr_lists.c:1428)
dev_set_promiscuity (net/core/dev_api.c:289)
br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172)
br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747)
br_setport (net/bridge/br_netlink.c:1000)
br_setlink (net/bridge/br_netlink.c:1118)
rtnl_bridge_setlink (net/core/rtnetlink.c:5572)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7005)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1318 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sock_sendmsg (net/socket.c:787 (discriminator 4) net/socket.c:802 (discriminator 4))
____sys_sendmsg (net/socket.c:2698)
___sys_sendmsg (net/socket.c:2752)
__sys_sendmsg (net/socket.c:2784)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
CVE-2026-63988
Medium · 5.5
CWE-667 Jul 19, 2026
bridge: Fix sleep in atomic context in sysfs path
In the Linux kernel, the following vulnerability has been resolved:
bridge: Fix sleep in atomic context in sysfs path
Since the start of the git history, brport_store() always acquired the
bridge lock. Back then this decision made sense: The bridge lock
protects the STP state of the bridge and its ports and at that time the
function was only used by two STP related attributes (cost and
priority).
Nowadays, brport_store() processes a lot more attributes and most of
them do not need the bridge lock:
* Bridge flags: Only require RTNL. Read locklessly by the data path.
Annotations can be added in net-next.
* FDB port flushing: Only requires the FDB lock.
* Multicast attributes: Only require the multicast lock.
* Group forward mask: Only requires RTNL. Read locklessly by the data
path. Annotations can be added in net-next.
* Backup port: Only requires RTNL. Read locklessly by the data path.
This is a problem as the bridge calls dev_set_promiscuity() when certain
bridge port flags change and this function can sleep since the commit
cited below, resulting in a splat such as [1].
Fix this by reducing the scope of the bridge lock and only take it when
processing the two STP related attributes that require it. Remove the
now stale comment from br_switchdev_set_port_flag(). The
SWITCHDEV_F_DEFER flag can be removed in net-next.
[1]
BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 372, name: bash
preempt_count: 201, expected: 0
RCU nest depth: 0, expected: 0
5 locks held by bash/372:
#0: ffff88810c51c3f0 (sb_writers#7){.+.+}-{0:0}, at: ksys_write (fs/read_write.c:740)
#1: ffff888115ce9480 (&of->mutex){+.+.}-{4:4}, at: kernfs_fop_write_iter (fs/kernfs/file.c:343)
#2: ffff88810b9fd330 (kn->active#37){.+.+}-{0:0}, at: kernfs_fop_write_iter (fs/kernfs/file.c:80 fs/kernfs/file.c:344)
#3: ffffffffa59473a0 (rtnl_mutex){+.+.}-{4:4}, at: brport_store (net/bridge/br_sysfs_if.c:326)
#4: ffff8881099d2d58 (&br->lock){+...}-{3:3}, at: brport_store (./include/linux/spinlock.h:348 net/bridge/br_sysfs_if.c:345)
Preemption disabled at:
0x0
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
__might_resched.cold (kernel/sched/core.c:9163)
netif_rx_mode_run (net/core/dev_addr_lists.c:1262)
netif_rx_mode_sync (net/core/dev_addr_lists.c:1428)
dev_set_promiscuity (net/core/dev_api.c:289)
br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172)
br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747)
store_learning (net/bridge/br_sysfs_if.c:79 net/bridge/br_sysfs_if.c:235)
brport_store (net/bridge/br_sysfs_if.c:346)
kernfs_fop_write_iter (fs/kernfs/file.c:352)
new_sync_write (fs/read_write.c:595)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
CVE-2026-53358
High · 8.8
CWE-667 Jul 2, 2026
Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen()
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen()
l2cap_chan_close() removes the channel from conn->chan_l, which
must be done under conn->lock. cleanup_listen() runs under the
parent sk_lock, so acquiring conn->lock would invert the
established conn->lock -> chan->lock -> sk_lock order.
Instead of calling l2cap_chan_close() directly, schedule
l2cap_chan_timeout with delay 0 to close the channel
asynchronously. The timeout handler already acquires conn->lock
and chan->lock in the correct order.
The timer is only armed when chan->conn is still set: if it is
already NULL, l2cap_conn_del() has already processed this channel
(l2cap_chan_del + l2cap_sock_teardown_cb + l2cap_sock_close_cb),
so there is nothing left to do. If l2cap_conn_del() races in
after the timer is armed, __clear_chan_timer() inside
l2cap_chan_del() cancels it; if the timer has already fired, the
handler returns harmlessly because chan->conn was cleared.
CVE-2026-53326
Medium · 5.5
CWE-667 Jul 1, 2026
debugobjects: Don't call fill_pool() in early boot hardirq context
In the Linux kernel, the following vulnerability has been resolved:
debugobjects: Don't call fill_pool() in early boot hardirq context
When booting a debug PREEMPT_RT kernel on an ARM64 system, a "inconsistent
{HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage" lockdep warning message was
reported to the console.
During early boot, interrupts are enabled before the scheduler is
enabled. In this window (before SYSTEM_SCHEDULING is set) interrupts can
fire and in the hard interrupt context handler attempt to fill the pool
This can lead to a deadlock when the interrupt occurred when the interrupt
hits a region which holds a lock that is required to be taken in the
allocation path.
Add a new can_fill_pool() helper and reorder the exception rule and forbid
this scenario by excluding allocations from hard interrupt context.
CVE-2026-10647
Medium · 5.3
CWE-667 Jun 29, 2026
Deadlock denial of service in USB CDC-NCM device class on TX enqueue failure
The USB CDC-NCM device class (subsys/usb/device_next/class/usbd_cdc_ncm.c) ignores the return value of usbd_ep_enqueue() in its ethernet transmit callback cdc_ncm_send(). When the enqueue fails, the function still calls k_sem_take(&data->sync_sem, K_FOREVER), blocking on a completion semaphore that is only ever signaled from the bulk-IN transfer-completion callback. Because nothing was enqueued, that callback never fires and the calling thread — a shared network traffic-class TX thread — deadlocks permanently while holding the interface TX lock, halting transmission until reboot (and leaking the transmit buffer).
The enqueue fails under conditions controlled by the attached USB host: usbd_ep_enqueue() returns -EPERM whenever the bus is suspended (a standard, persistent host operation), and the underlying udc_ep_enqueue() returns -EPERM/-ENODEV on disconnect, bus reset, or endpoint disable. The cdc_ncm_send() guard only checks the DATA_IFACE_ENABLED and IFACE_UP flags, not the suspended state, so a packet transmitted while the host holds the bus suspended reaches the failing enqueue and deadlocks the TX path.
The realistic trigger is a bus suspend that occurs while the exported network interface is active and has traffic to send — host sleep, USB selective/auto-suspend, or hub power management — after which any device-originated packet deadlocks the path, recoverable only by reboot. The impact is a persistent loss of the virtual network connection between the host's NCM interface and the Zephyr device; because the deadlocked thread is a shared traffic-class TX thread, egress on other network interfaces can stall as well. There is no memory corruption or information disclosure.
The defect was introduced with the CDC-NCM driver and shipped in releases through v4.4.0; it is fixed by checking the usbd_ep_enqueue() return value and freeing the buffer before the blocking wait.