CVE Database

In processLaunchBrowser of CommandParamsFactory.java, there is a possible browser interaction from the lockscreen due to improper locking. This could lead to physical escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

Under undisclosed traffic conditions along with conditions beyond the attacker's control, hardware systems with a High-Speed Bridge (HSB) may experience a lockup of the HSB.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

In the Linux kernel, the following vulnerability has been resolved: net: phy: transfer phy_config_inband() locking responsibility to phylink Problem description =================== Lockdep reports a possible circular locking dependency (AB/BA) between &pl->state_mutex and &phy->lock, as follows. phylink_resolve() // acquires &pl->state_mutex -> phylink_major_config() -> phy_config_inband() // acquires &pl->phydev->lock whereas all the other call sites where &pl->state_mutex and &pl->phydev->lock have the locking scheme reversed. Everywhere else, &pl->phydev->lock is acquired at the top level, and &pl->state_mutex at the lower level. A clear example is phylink_bringup_phy(). The outlier is the newly introduced phy_config_inband() and the existing lock order is the correct one. To understand why it cannot be the other way around, it is sufficient to consider phylink_phy_change(), phylink's callback from the PHY device's phy->phy_link_change() virtual method, invoked by the PHY state machine. phy_link_up() and phy_link_down(), the (indirect) callers of phylink_phy_change(), are called with &phydev->lock acquired. Then phylink_phy_change() acquires its own &pl->state_mutex, to serialize changes made to its pl->phy_state and pl->link_config. So all other instances of &pl->state_mutex and &phydev->lock must be consistent with this order. Problem impact ============== I think the kernel runs a serious deadlock risk if an existing phylink_resolve() thread, which results in a phy_config_inband() call, is concurrent with a phy_link_up() or phy_link_down() call, which will deadlock on &pl->state_mutex in phylink_phy_change(). Practically speaking, the impact may be limited by the slow speed of the medium auto-negotiation protocol, which makes it unlikely for the current state to still be unresolved when a new one is detected, but I think the problem is there. Nonetheless, the problem was discovered using lockdep. Proposed solution ================= Practically speaking, the phy_config_inband() requirement of having phydev->lock acquired must transfer to the caller (phylink is the only caller). There, it must bubble up until immediately before &pl->state_mutex is acquired, for the cases where that takes place. Solution details, considerations, notes ======================================= This is the phy_config_inband() call graph: sfp_upstream_ops :: connect_phy() | v phylink_sfp_connect_phy() | v phylink_sfp_config_phy() | | sfp_upstream_ops :: module_insert() | | | v | phylink_sfp_module_insert() | | | | sfp_upstream_ops :: module_start() | | | | | v | | phylink_sfp_module_start() | | | | v v | phylink_sfp_config_optical() phylink_start() | | | phylink_resume() v v | | phylink_sfp_set_config() | | | v v v phylink_mac_initial_config() | phylink_resolve() | | phylink_ethtool_ksettings_set() v v v phylink_major_config() | v phy_config_inband() phylink_major_config() caller #1, phylink_mac_initial_config(), does not acquire &pl->state_mutex nor do its callers. It must acquire &pl->phydev->lock prior to calling phylink_major_config(). phylink_major_config() caller #2, phylink_resolve() acquires &pl->state_mutex, thus also needs to acquire &pl->phydev->lock. phylink_major_config() caller #3, phylink_ethtool_ksettings_set(), is completely uninteresting, because it only call ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc, mm/kasan: respect gfp mask in kasan_populate_vmalloc() kasan_populate_vmalloc() and its helpers ignore the caller's gfp_mask and always allocate memory using the hardcoded GFP_KERNEL flag. This makes them inconsistent with vmalloc(), which was recently extended to support GFP_NOFS and GFP_NOIO allocations. Page table allocations performed during shadow population also ignore the external gfp_mask. To preserve the intended semantics of GFP_NOFS and GFP_NOIO, wrap the apply_to_page_range() calls into the appropriate memalloc scope. xfs calls vmalloc with GFP_NOFS, so this bug could lead to deadlock. There was a report here https://lkml.kernel.org/r/686ea951.050a0220.385921.0016.GAE@google.com This patch: - Extends kasan_populate_vmalloc() and helpers to take gfp_mask; - Passes gfp_mask down to alloc_pages_bulk() and __get_free_page(); - Enforces GFP_NOFS/NOIO semantics with memalloc_*_save()/restore() around apply_to_page_range(); - Updates vmalloc.c and percpu allocator call sites accordingly.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix recursive semaphore deadlock in fiemap call syzbot detected a OCFS2 hang due to a recursive semaphore on a FS_IOC_FIEMAP of the extent list on a specially crafted mmap file. context_switch kernel/sched/core.c:5357 [inline] __schedule+0x1798/0x4cc0 kernel/sched/core.c:6961 __schedule_loop kernel/sched/core.c:7043 [inline] schedule+0x165/0x360 kernel/sched/core.c:7058 schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:7115 rwsem_down_write_slowpath+0x872/0xfe0 kernel/locking/rwsem.c:1185 __down_write_common kernel/locking/rwsem.c:1317 [inline] __down_write kernel/locking/rwsem.c:1326 [inline] down_write+0x1ab/0x1f0 kernel/locking/rwsem.c:1591 ocfs2_page_mkwrite+0x2ff/0xc40 fs/ocfs2/mmap.c:142 do_page_mkwrite+0x14d/0x310 mm/memory.c:3361 wp_page_shared mm/memory.c:3762 [inline] do_wp_page+0x268d/0x5800 mm/memory.c:3981 handle_pte_fault mm/memory.c:6068 [inline] __handle_mm_fault+0x1033/0x5440 mm/memory.c:6195 handle_mm_fault+0x40a/0x8e0 mm/memory.c:6364 do_user_addr_fault+0x764/0x1390 arch/x86/mm/fault.c:1387 handle_page_fault arch/x86/mm/fault.c:1476 [inline] exc_page_fault+0x76/0xf0 arch/x86/mm/fault.c:1532 asm_exc_page_fault+0x26/0x30 arch/x86/include/asm/idtentry.h:623 RIP: 0010:copy_user_generic arch/x86/include/asm/uaccess_64.h:126 [inline] RIP: 0010:raw_copy_to_user arch/x86/include/asm/uaccess_64.h:147 [inline] RIP: 0010:_inline_copy_to_user include/linux/uaccess.h:197 [inline] RIP: 0010:_copy_to_user+0x85/0xb0 lib/usercopy.c:26 Code: e8 00 bc f7 fc 4d 39 fc 72 3d 4d 39 ec 77 38 e8 91 b9 f7 fc 4c 89 f7 89 de e8 47 25 5b fd 0f 01 cb 4c 89 ff 48 89 d9 4c 89 f6 <f3> a4 0f 1f 00 48 89 cb 0f 01 ca 48 89 d8 5b 41 5c 41 5d 41 5e 41 RSP: 0018:ffffc9000403f950 EFLAGS: 00050256 RAX: ffffffff84c7f101 RBX: 0000000000000038 RCX: 0000000000000038 RDX: 0000000000000000 RSI: ffffc9000403f9e0 RDI: 0000200000000060 RBP: ffffc9000403fa90 R08: ffffc9000403fa17 R09: 1ffff92000807f42 R10: dffffc0000000000 R11: fffff52000807f43 R12: 0000200000000098 R13: 00007ffffffff000 R14: ffffc9000403f9e0 R15: 0000200000000060 copy_to_user include/linux/uaccess.h:225 [inline] fiemap_fill_next_extent+0x1c0/0x390 fs/ioctl.c:145 ocfs2_fiemap+0x888/0xc90 fs/ocfs2/extent_map.c:806 ioctl_fiemap fs/ioctl.c:220 [inline] do_vfs_ioctl+0x1173/0x1430 fs/ioctl.c:532 __do_sys_ioctl fs/ioctl.c:596 [inline] __se_sys_ioctl+0x82/0x170 fs/ioctl.c:584 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5f13850fd9 RSP: 002b:00007ffe3b3518b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000200000000000 RCX: 00007f5f13850fd9 RDX: 0000200000000040 RSI: 00000000c020660b RDI: 0000000000000004 RBP: 6165627472616568 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe3b3518f0 R13: 00007ffe3b351b18 R14: 431bde82d7b634db R15: 00007f5f1389a03b ocfs2_fiemap() takes a read lock of the ip_alloc_sem semaphore (since v2.6.22-527-g7307de80510a) and calls fiemap_fill_next_extent() to read the extent list of this running mmap executable. The user supplied buffer to hold the fiemap information page faults calling ocfs2_page_mkwrite() which will take a write lock (since v2.6.27-38-g00dc417fa3e7) of the same semaphore. This recursive semaphore will hold filesystem locks and causes a hang of the fileystem. The ip_alloc_sem protects the inode extent list and size. Release the read semphore before calling fiemap_fill_next_extent() in ocfs2_fiemap() and ocfs2_fiemap_inline(). This does an unnecessary semaphore lock/unlock on the last extent but simplifies the error path.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix subvolume deletion lockup caused by inodes xarray race There is a race condition between inode eviction and inode caching that can cause a live struct btrfs_inode to be missing from the root->inodes xarray. Specifically, there is a window during evict() between the inode being unhashed and deleted from the xarray. If btrfs_iget() is called for the same inode in that window, it will be recreated and inserted into the xarray, but then eviction will delete the new entry, leaving nothing in the xarray: Thread 1 Thread 2 --------------------------------------------------------------- evict() remove_inode_hash() btrfs_iget_path() btrfs_iget_locked() btrfs_read_locked_inode() btrfs_add_inode_to_root() destroy_inode() btrfs_destroy_inode() btrfs_del_inode_from_root() __xa_erase In turn, this can cause issues for subvolume deletion. Specifically, if an inode is in this lost state, and all other inodes are evicted, then btrfs_del_inode_from_root() will call btrfs_add_dead_root() prematurely. If the lost inode has a delayed_node attached to it, then when btrfs_clean_one_deleted_snapshot() calls btrfs_kill_all_delayed_nodes(), it will loop forever because the delayed_nodes xarray will never become empty (unless memory pressure forces the inode out). We saw this manifest as soft lockups in production. Fix it by only deleting the xarray entry if it matches the given inode (using __xa_cmpxchg()).

In the Linux kernel, the following vulnerability has been resolved: mm: slub: avoid wake up kswapd in set_track_prepare set_track_prepare() can incur lock recursion. The issue is that it is called from hrtimer_start_range_ns holding the per_cpu(hrtimer_bases)[n].lock, but when enabled CONFIG_DEBUG_OBJECTS_TIMERS, may wake up kswapd in set_track_prepare, and try to hold the per_cpu(hrtimer_bases)[n].lock. Avoid deadlock caused by implicitly waking up kswapd by passing in allocation flags, which do not contain __GFP_KSWAPD_RECLAIM in the debug_objects_fill_pool() case. Inside stack depot they are processed by gfp_nested_mask(). Since ___slab_alloc() has preemption disabled, we mask out __GFP_DIRECT_RECLAIM from the flags there. The oops looks something like: BUG: spinlock recursion on CPU#3, swapper/3/0 lock: 0xffffff8a4bf29c80, .magic: dead4ead, .owner: swapper/3/0, .owner_cpu: 3 Hardware name: Qualcomm Technologies, Inc. Popsicle based on SM8850 (DT) Call trace: spin_bug+0x0 _raw_spin_lock_irqsave+0x80 hrtimer_try_to_cancel+0x94 task_contending+0x10c enqueue_dl_entity+0x2a4 dl_server_start+0x74 enqueue_task_fair+0x568 enqueue_task+0xac do_activate_task+0x14c ttwu_do_activate+0xcc try_to_wake_up+0x6c8 default_wake_function+0x20 autoremove_wake_function+0x1c __wake_up+0xac wakeup_kswapd+0x19c wake_all_kswapds+0x78 __alloc_pages_slowpath+0x1ac __alloc_pages_noprof+0x298 stack_depot_save_flags+0x6b0 stack_depot_save+0x14 set_track_prepare+0x5c ___slab_alloc+0xccc __kmalloc_cache_noprof+0x470 __set_page_owner+0x2bc post_alloc_hook[jt]+0x1b8 prep_new_page+0x28 get_page_from_freelist+0x1edc __alloc_pages_noprof+0x13c alloc_slab_page+0x244 allocate_slab+0x7c ___slab_alloc+0x8e8 kmem_cache_alloc_noprof+0x450 debug_objects_fill_pool+0x22c debug_object_activate+0x40 enqueue_hrtimer[jt]+0xdc hrtimer_start_range_ns+0x5f8 ...

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix lockdep assertion on sync reset unload event Fix lockdep assertion triggered during sync reset unload event. When the sync reset flow is initiated using the devlink reload fw_activate option, the PF already holds the devlink lock while handling unload event. In this case, delegate sync reset unload event handling back to the devlink callback process to avoid double-locking and resolve the lockdep warning. Kernel log: WARNING: CPU: 9 PID: 1578 at devl_assert_locked+0x31/0x40 [...] Call Trace: <TASK> mlx5_unload_one_devl_locked+0x2c/0xc0 [mlx5_core] mlx5_sync_reset_unload_event+0xaf/0x2f0 [mlx5_core] process_one_work+0x222/0x640 worker_thread+0x199/0x350 kthread+0x10b/0x230 ? __pfx_worker_thread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x8e/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: dm: dm-crypt: Do not partially accept write BIOs with zoned targets Read and write operations issued to a dm-crypt target may be split according to the dm-crypt internal limits defined by the max_read_size and max_write_size module parameters (default is 128 KB). The intent is to improve processing time of large BIOs by splitting them into smaller operations that can be parallelized on different CPUs. For zoned dm-crypt targets, this BIO splitting is still done but without the parallel execution to ensure that the issuing order of write operations to the underlying devices remains sequential. However, the splitting itself causes other problems: 1) Since dm-crypt relies on the block layer zone write plugging to handle zone append emulation using regular write operations, the reminder of a split write BIO will always be plugged into the target zone write plugged. Once the on-going write BIO finishes, this reminder BIO is unplugged and issued from the zone write plug work. If this reminder BIO itself needs to be split, the reminder will be re-issued and plugged again, but that causes a call to a blk_queue_enter(), which may block if a queue freeze operation was initiated. This results in a deadlock as DM submission still holds BIOs that the queue freeze side is waiting for. 2) dm-crypt relies on the emulation done by the block layer using regular write operations for processing zone append operations. This still requires to properly return the written sector as the BIO sector of the original BIO. However, this can be done correctly only and only if there is a single clone BIO used for processing the original zone append operation issued by the user. If the size of a zone append operation is larger than dm-crypt max_write_size, then the orginal BIO will be split and processed as a chain of regular write operations. Such chaining result in an incorrect written sector being returned to the zone append issuer using the original BIO sector. This in turn results in file system data corruptions using xfs or btrfs. Fix this by modifying get_max_request_size() to always return the size of the BIO to avoid it being split with dm_accpet_partial_bio() in crypt_map(). get_max_request_size() is renamed to get_max_request_sectors() to clarify the unit of the value returned and its interface is changed to take a struct dm_target pointer and a pointer to the struct bio being processed. In addition to this change, to ensure that crypt_alloc_buffer() works correctly, set the dm-crypt device max_hw_sectors limit to be at most BIO_MAX_VECS << PAGE_SECTORS_SHIFT (1 MB with a 4KB page architecture). This forces DM core to split write BIOs before passing them to crypt_map(), and thus guaranteeing that dm-crypt can always accept an entire write BIO without needing to split it. This change does not have any effect on the read path of dm-crypt. Read operations can still be split and the BIO fragments processed in parallel. There is also no impact on the performance of the write path given that all zone write BIOs were already processed inline instead of in parallel. This change also does not affect in any way regular dm-crypt block devices.

In the Linux kernel, the following vulnerability has been resolved: jbd2: prevent softlockup in jbd2_log_do_checkpoint() Both jbd2_log_do_checkpoint() and jbd2_journal_shrink_checkpoint_list() periodically release j_list_lock after processing a batch of buffers to avoid long hold times on the j_list_lock. However, since both functions contend for j_list_lock, the combined time spent waiting and processing can be significant. jbd2_journal_shrink_checkpoint_list() explicitly calls cond_resched() when need_resched() is true to avoid softlockups during prolonged operations. But jbd2_log_do_checkpoint() only exits its loop when need_resched() is true, relying on potentially sleeping functions like __flush_batch() or wait_on_buffer() to trigger rescheduling. If those functions do not sleep, the kernel may hit a softlockup. watchdog: BUG: soft lockup - CPU#3 stuck for 156s! [kworker/u129:2:373] CPU: 3 PID: 373 Comm: kworker/u129:2 Kdump: loaded Not tainted 6.6.0+ #10 Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.27 06/13/2017 Workqueue: writeback wb_workfn (flush-7:2) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : native_queued_spin_lock_slowpath+0x358/0x418 lr : jbd2_log_do_checkpoint+0x31c/0x438 [jbd2] Call trace: native_queued_spin_lock_slowpath+0x358/0x418 jbd2_log_do_checkpoint+0x31c/0x438 [jbd2] __jbd2_log_wait_for_space+0xfc/0x2f8 [jbd2] add_transaction_credits+0x3bc/0x418 [jbd2] start_this_handle+0xf8/0x560 [jbd2] jbd2__journal_start+0x118/0x228 [jbd2] __ext4_journal_start_sb+0x110/0x188 [ext4] ext4_do_writepages+0x3dc/0x740 [ext4] ext4_writepages+0xa4/0x190 [ext4] do_writepages+0x94/0x228 __writeback_single_inode+0x48/0x318 writeback_sb_inodes+0x204/0x590 __writeback_inodes_wb+0x54/0xf8 wb_writeback+0x2cc/0x3d8 wb_do_writeback+0x2e0/0x2f8 wb_workfn+0x80/0x2a8 process_one_work+0x178/0x3e8 worker_thread+0x234/0x3b8 kthread+0xf0/0x108 ret_from_fork+0x10/0x20 So explicitly call cond_resched() in jbd2_log_do_checkpoint() to avoid softlockup.

In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix soft lockup in br_multicast_query_expired() When set multicast_query_interval to a large value, the local variable 'time' in br_multicast_send_query() may overflow. If the time is smaller than jiffies, the timer will expire immediately, and then call mod_timer() again, which creates a loop and may trigger the following soft lockup issue. watchdog: BUG: soft lockup - CPU#1 stuck for 221s! [rb_consumer:66] CPU: 1 UID: 0 PID: 66 Comm: rb_consumer Not tainted 6.16.0+ #259 PREEMPT(none) Call Trace: <IRQ> __netdev_alloc_skb+0x2e/0x3a0 br_ip6_multicast_alloc_query+0x212/0x1b70 __br_multicast_send_query+0x376/0xac0 br_multicast_send_query+0x299/0x510 br_multicast_query_expired.constprop.0+0x16d/0x1b0 call_timer_fn+0x3b/0x2a0 __run_timers+0x619/0x950 run_timer_softirq+0x11c/0x220 handle_softirqs+0x18e/0x560 __irq_exit_rcu+0x158/0x1a0 sysvec_apic_timer_interrupt+0x76/0x90 </IRQ> This issue can be reproduced with: ip link add br0 type bridge echo 1 > /sys/class/net/br0/bridge/multicast_querier echo 0xffffffffffffffff > /sys/class/net/br0/bridge/multicast_query_interval ip link set dev br0 up The multicast_startup_query_interval can also cause this issue. Similar to the commit 99b40610956a ("net: bridge: mcast: add and enforce query interval minimum"), add check for the query interval maximum to fix this issue.

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix lockdep warning during rmmod The commit under the Fixes tag added a netdev_assert_locked() in bnxt_free_ntp_fltrs(). The lock should be held during normal run-time but the assert will be triggered (see below) during bnxt_remove_one() which should not need the lock. The netdev is already unregistered by then. Fix it by calling netdev_assert_locked_or_invisible() which will not assert if the netdev is unregistered. WARNING: CPU: 5 PID: 2241 at ./include/net/netdev_lock.h:17 bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Modules linked in: rpcrdma rdma_cm iw_cm ib_cm configfs ib_core bnxt_en(-) bridge stp llc x86_pkg_temp_thermal xfs tg3 [last unloaded: bnxt_re] CPU: 5 UID: 0 PID: 2241 Comm: rmmod Tainted: G S W 6.16.0 #2 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 RIP: 0010:bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Code: 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 47 60 be ff ff ff ff 48 8d b8 28 0c 00 00 e8 d0 cf 41 c3 85 c0 0f 85 2e ff ff ff <0f> 0b e9 27 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffa92082387da0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9e5b593d8000 RCX: 0000000000000001 RDX: 0000000000000001 RSI: ffffffff83dc9a70 RDI: ffffffff83e1a1cf RBP: ffff9e5b593d8c80 R08: 0000000000000000 R09: ffffffff8373a2b3 R10: 000000008100009f R11: 0000000000000001 R12: 0000000000000001 R13: ffffffffc01c4478 R14: dead000000000122 R15: dead000000000100 FS: 00007f3a8a52c740(0000) GS:ffff9e631ad1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055bb289419c8 CR3: 000000011274e001 CR4: 00000000003706f0 Call Trace: <TASK> bnxt_remove_one+0x57/0x180 [bnxt_en] pci_device_remove+0x39/0xc0 device_release_driver_internal+0xa5/0x130 driver_detach+0x42/0x90 bus_remove_driver+0x61/0xc0 pci_unregister_driver+0x38/0x90 bnxt_exit+0xc/0x7d0 [bnxt_en]

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Optimize module load time by optimizing PLT/GOT counting When enabling CONFIG_KASAN, CONFIG_PREEMPT_VOLUNTARY_BUILD and CONFIG_PREEMPT_VOLUNTARY at the same time, there will be soft deadlock, the relevant logs are as follows: rcu: INFO: rcu_sched self-detected stall on CPU ... Call Trace: [<900000000024f9e4>] show_stack+0x5c/0x180 [<90000000002482f4>] dump_stack_lvl+0x94/0xbc [<9000000000224544>] rcu_dump_cpu_stacks+0x1fc/0x280 [<900000000037ac80>] rcu_sched_clock_irq+0x720/0xf88 [<9000000000396c34>] update_process_times+0xb4/0x150 [<90000000003b2474>] tick_nohz_handler+0xf4/0x250 [<9000000000397e28>] __hrtimer_run_queues+0x1d0/0x428 [<9000000000399b2c>] hrtimer_interrupt+0x214/0x538 [<9000000000253634>] constant_timer_interrupt+0x64/0x80 [<9000000000349938>] __handle_irq_event_percpu+0x78/0x1a0 [<9000000000349a78>] handle_irq_event_percpu+0x18/0x88 [<9000000000354c00>] handle_percpu_irq+0x90/0xf0 [<9000000000348c74>] handle_irq_desc+0x94/0xb8 [<9000000001012b28>] handle_cpu_irq+0x68/0xa0 [<9000000001def8c0>] handle_loongarch_irq+0x30/0x48 [<9000000001def958>] do_vint+0x80/0xd0 [<9000000000268a0c>] kasan_mem_to_shadow.part.0+0x2c/0x2a0 [<90000000006344f4>] __asan_load8+0x4c/0x120 [<900000000025c0d0>] module_frob_arch_sections+0x5c8/0x6b8 [<90000000003895f0>] load_module+0x9e0/0x2958 [<900000000038b770>] __do_sys_init_module+0x208/0x2d0 [<9000000001df0c34>] do_syscall+0x94/0x190 [<900000000024d6fc>] handle_syscall+0xbc/0x158 After analysis, this is because the slow speed of loading the amdgpu module leads to the long time occupation of the cpu and then the soft deadlock. When loading a module, module_frob_arch_sections() tries to figure out the number of PLTs/GOTs that will be needed to handle all the RELAs. It will call the count_max_entries() to find in an out-of-order date which counting algorithm has O(n^2) complexity. To make it faster, we sort the relocation list by info and addend. That way, to check for a duplicate relocation, it just needs to compare with the previous entry. This reduces the complexity of the algorithm to O(n log n), as done in commit d4e0340919fb ("arm64/module: Optimize module load time by optimizing PLT counting"). This gives sinificant reduction in module load time for modules with large number of relocations. After applying this patch, the soft deadlock problem has been solved, and the kernel starts normally without "Call Trace". Using the default configuration to test some modules, the results are as follows: Module Size ip_tables 36K fat 143K radeon 2.5MB amdgpu 16MB Without this patch: Module Module load time (ms) Count(PLTs/GOTs) ip_tables 18 59/6 fat 0 162/14 radeon 54 1221/84 amdgpu 1411 4525/1098 With this patch: Module Module load time (ms) Count(PLTs/GOTs) ip_tables 18 59/6 fat 0 162/14 radeon 22 1221/84 amdgpu 45 4525/1098

In the Linux kernel, the following vulnerability has been resolved: mm/kmemleak: avoid deadlock by moving pr_warn() outside kmemleak_lock When netpoll is enabled, calling pr_warn_once() while holding kmemleak_lock in mem_pool_alloc() can cause a deadlock due to lock inversion with the netconsole subsystem. This occurs because pr_warn_once() may trigger netpoll, which eventually leads to __alloc_skb() and back into kmemleak code, attempting to reacquire kmemleak_lock. This is the path for the deadlock. mem_pool_alloc() -> raw_spin_lock_irqsave(&kmemleak_lock, flags); -> pr_warn_once() -> netconsole subsystem -> netpoll -> __alloc_skb -> __create_object -> raw_spin_lock_irqsave(&kmemleak_lock, flags); Fix this by setting a flag and issuing the pr_warn_once() after kmemleak_lock is released.

In the Linux kernel, the following vulnerability has been resolved: media: mt9m114: Fix deadlock in get_frame_interval/set_frame_interval Getting / Setting the frame interval using the V4L2 subdev pad ops get_frame_interval/set_frame_interval causes a deadlock, as the subdev state is locked in the [1] but also in the driver itself. In [2] it's described that the caller is responsible to acquire and release the lock in this case. Therefore, acquiring the lock in the driver is wrong. Remove the lock acquisitions/releases from mt9m114_ifp_get_frame_interval() and mt9m114_ifp_set_frame_interval(). [1] drivers/media/v4l2-core/v4l2-subdev.c - line 1129 [2] Documentation/driver-api/media/v4l2-subdev.rst

In the Linux kernel, the following vulnerability has been resolved: net: hibmcge: fix rtnl deadlock issue Currently, the hibmcge netdev acquires the rtnl_lock in pci_error_handlers.reset_prepare() and releases it in pci_error_handlers.reset_done(). However, in the PCI framework: pci_reset_bus - __pci_reset_slot - pci_slot_save_and_disable_locked - pci_dev_save_and_disable - err_handler->reset_prepare(dev); In pci_slot_save_and_disable_locked(): list_for_each_entry(dev, &slot->bus->devices, bus_list) { if (!dev->slot || dev->slot!= slot) continue; pci_dev_save_and_disable(dev); if (dev->subordinate) pci_bus_save_and_disable_locked(dev->subordinate); } This will iterate through all devices under the current bus and execute err_handler->reset_prepare(), causing two devices of the hibmcge driver to sequentially request the rtnl_lock, leading to a deadlock. Since the driver now executes netif_device_detach() before the reset process, it will not concurrently with other netdev APIs, so there is no need to hold the rtnl_lock now. Therefore, this patch removes the rtnl_lock during the reset process and adjusts the position of HBG_NIC_STATE_RESETTING to ensure that multiple resets are not executed concurrently.

In the Linux kernel, the following vulnerability has been resolved: smb/server: avoid deadlock when linking with ReplaceIfExists If smb2_create_link() is called with ReplaceIfExists set and the name does exist then a deadlock will happen. ksmbd_vfs_kern_path_locked() will return with success and the parent directory will be locked. ksmbd_vfs_remove_file() will then remove the file. ksmbd_vfs_link() will then be called while the parent is still locked. It will try to lock the same parent and will deadlock. This patch moves the ksmbd_vfs_kern_path_unlock() call to *before* ksmbd_vfs_link() and then simplifies the code, removing the file_present flag variable.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Add missing lock in cfg80211_check_and_end_cac() Callers of wdev_chandef() must hold the wiphy mutex. But the worker cfg80211_propagate_cac_done_wk() never takes the lock. Which triggers the warning below with the mesh_peer_connected_dfs test from hostapd and not (yet) released mac80211 code changes: WARNING: CPU: 0 PID: 495 at net/wireless/chan.c:1552 wdev_chandef+0x60/0x165 Modules linked in: CPU: 0 UID: 0 PID: 495 Comm: kworker/u4:2 Not tainted 6.14.0-rc5-wt-g03960e6f9d47 #33 13c287eeabfe1efea01c0bcc863723ab082e17cf Workqueue: cfg80211 cfg80211_propagate_cac_done_wk Stack: 00000000 00000001 ffffff00 6093267c 00000000 6002ec30 6d577c50 60037608 00000000 67e8d108 6063717b 00000000 Call Trace: [<6002ec30>] ? _printk+0x0/0x98 [<6003c2b3>] show_stack+0x10e/0x11a [<6002ec30>] ? _printk+0x0/0x98 [<60037608>] dump_stack_lvl+0x71/0xb8 [<6063717b>] ? wdev_chandef+0x60/0x165 [<6003766d>] dump_stack+0x1e/0x20 [<6005d1b7>] __warn+0x101/0x20f [<6005d3a8>] warn_slowpath_fmt+0xe3/0x15d [<600b0c5c>] ? mark_lock.part.0+0x0/0x4ec [<60751191>] ? __this_cpu_preempt_check+0x0/0x16 [<600b11a2>] ? mark_held_locks+0x5a/0x6e [<6005d2c5>] ? warn_slowpath_fmt+0x0/0x15d [<60052e53>] ? unblock_signals+0x3a/0xe7 [<60052f2d>] ? um_set_signals+0x2d/0x43 [<60751191>] ? __this_cpu_preempt_check+0x0/0x16 [<607508b2>] ? lock_is_held_type+0x207/0x21f [<6063717b>] wdev_chandef+0x60/0x165 [<605f89b4>] regulatory_propagate_dfs_state+0x247/0x43f [<60052f00>] ? um_set_signals+0x0/0x43 [<605e6bfd>] cfg80211_propagate_cac_done_wk+0x3a/0x4a [<6007e460>] process_scheduled_works+0x3bc/0x60e [<6007d0ec>] ? move_linked_works+0x4d/0x81 [<6007d120>] ? assign_work+0x0/0xaa [<6007f81f>] worker_thread+0x220/0x2dc [<600786ef>] ? set_pf_worker+0x0/0x57 [<60087c96>] ? to_kthread+0x0/0x43 [<6008ab3c>] kthread+0x2d3/0x2e2 [<6007f5ff>] ? worker_thread+0x0/0x2dc [<6006c05b>] ? calculate_sigpending+0x0/0x56 [<6003b37d>] new_thread_handler+0x4a/0x64 irq event stamp: 614611 hardirqs last enabled at (614621): [<00000000600bc96b>] __up_console_sem+0x82/0xaf hardirqs last disabled at (614630): [<00000000600bc92c>] __up_console_sem+0x43/0xaf softirqs last enabled at (614268): [<00000000606c55c6>] __ieee80211_wake_queue+0x933/0x985 softirqs last disabled at (614266): [<00000000606c52d6>] __ieee80211_wake_queue+0x643/0x985

In the Linux kernel, the following vulnerability has been resolved: mptcp: make fallback action and fallback decision atomic Syzkaller reported the following splat: WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 __mptcp_do_fallback net/mptcp/protocol.h:1223 [inline] WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 mptcp_do_fallback net/mptcp/protocol.h:1244 [inline] WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 check_fully_established net/mptcp/options.c:982 [inline] WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 mptcp_incoming_options+0x21a8/0x2510 net/mptcp/options.c:1153 Modules linked in: CPU: 1 UID: 0 PID: 7704 Comm: syz.3.1419 Not tainted 6.16.0-rc3-gbd5ce2324dba #20 PREEMPT(voluntary) Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:__mptcp_do_fallback net/mptcp/protocol.h:1223 [inline] RIP: 0010:mptcp_do_fallback net/mptcp/protocol.h:1244 [inline] RIP: 0010:check_fully_established net/mptcp/options.c:982 [inline] RIP: 0010:mptcp_incoming_options+0x21a8/0x2510 net/mptcp/options.c:1153 Code: 24 18 e8 bb 2a 00 fd e9 1b df ff ff e8 b1 21 0f 00 e8 ec 5f c4 fc 44 0f b7 ac 24 b0 00 00 00 e9 54 f1 ff ff e8 d9 5f c4 fc 90 <0f> 0b 90 e9 b8 f4 ff ff e8 8b 2a 00 fd e9 8d e6 ff ff e8 81 2a 00 RSP: 0018:ffff8880a3f08448 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8880180a8000 RCX: ffffffff84afcf45 RDX: ffff888090223700 RSI: ffffffff84afdaa7 RDI: 0000000000000001 RBP: ffff888017955780 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8880180a8910 R14: ffff8880a3e9d058 R15: 0000000000000000 FS: 00005555791b8500(0000) GS:ffff88811c495000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000110c2800b7 CR3: 0000000058e44000 CR4: 0000000000350ef0 Call Trace: <IRQ> tcp_reset+0x26f/0x2b0 net/ipv4/tcp_input.c:4432 tcp_validate_incoming+0x1057/0x1b60 net/ipv4/tcp_input.c:5975 tcp_rcv_established+0x5b5/0x21f0 net/ipv4/tcp_input.c:6166 tcp_v4_do_rcv+0x5dc/0xa70 net/ipv4/tcp_ipv4.c:1925 tcp_v4_rcv+0x3473/0x44a0 net/ipv4/tcp_ipv4.c:2363 ip_protocol_deliver_rcu+0xba/0x480 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2f1/0x500 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:317 [inline] NF_HOOK include/linux/netfilter.h:311 [inline] ip_local_deliver+0x1be/0x560 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:469 [inline] ip_rcv_finish net/ipv4/ip_input.c:447 [inline] NF_HOOK include/linux/netfilter.h:317 [inline] NF_HOOK include/linux/netfilter.h:311 [inline] ip_rcv+0x514/0x810 net/ipv4/ip_input.c:567 __netif_receive_skb_one_core+0x197/0x1e0 net/core/dev.c:5975 __netif_receive_skb+0x1f/0x120 net/core/dev.c:6088 process_backlog+0x301/0x1360 net/core/dev.c:6440 __napi_poll.constprop.0+0xba/0x550 net/core/dev.c:7453 napi_poll net/core/dev.c:7517 [inline] net_rx_action+0xb44/0x1010 net/core/dev.c:7644 handle_softirqs+0x1d0/0x770 kernel/softirq.c:579 do_softirq+0x3f/0x90 kernel/softirq.c:480 </IRQ> <TASK> __local_bh_enable_ip+0xed/0x110 kernel/softirq.c:407 local_bh_enable include/linux/bottom_half.h:33 [inline] inet_csk_listen_stop+0x2c5/0x1070 net/ipv4/inet_connection_sock.c:1524 mptcp_check_listen_stop.part.0+0x1cc/0x220 net/mptcp/protocol.c:2985 mptcp_check_listen_stop net/mptcp/mib.h:118 [inline] __mptcp_close+0x9b9/0xbd0 net/mptcp/protocol.c:3000 mptcp_close+0x2f/0x140 net/mptcp/protocol.c:3066 inet_release+0xed/0x200 net/ipv4/af_inet.c:435 inet6_release+0x4f/0x70 net/ipv6/af_inet6.c:487 __sock_release+0xb3/0x270 net/socket.c:649 sock_close+0x1c/0x30 net/socket.c:1439 __fput+0x402/0xb70 fs/file_table.c:465 task_work_run+0x150/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xd4 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: s390/mm: Fix in_atomic() handling in do_secure_storage_access() Kernel user spaces accesses to not exported pages in atomic context incorrectly try to resolve the page fault. With debug options enabled call traces like this can be seen: BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1523 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 419074, name: qemu-system-s39 preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 INFO: lockdep is turned off. Preemption disabled at: [<00000383ea47cfa2>] copy_page_from_iter_atomic+0xa2/0x8a0 CPU: 12 UID: 0 PID: 419074 Comm: qemu-system-s39 Tainted: G W 6.16.0-20250531.rc0.git0.69b3a602feac.63.fc42.s390x+debug #1 PREEMPT Tainted: [W]=WARN Hardware name: IBM 3931 A01 703 (LPAR) Call Trace: [<00000383e990d282>] dump_stack_lvl+0xa2/0xe8 [<00000383e99bf152>] __might_resched+0x292/0x2d0 [<00000383eaa7c374>] down_read+0x34/0x2d0 [<00000383e99432f8>] do_secure_storage_access+0x108/0x360 [<00000383eaa724b0>] __do_pgm_check+0x130/0x220 [<00000383eaa842e4>] pgm_check_handler+0x114/0x160 [<00000383ea47d028>] copy_page_from_iter_atomic+0x128/0x8a0 ([<00000383ea47d016>] copy_page_from_iter_atomic+0x116/0x8a0) [<00000383e9c45eae>] generic_perform_write+0x16e/0x310 [<00000383e9eb87f4>] ext4_buffered_write_iter+0x84/0x160 [<00000383e9da0de4>] vfs_write+0x1c4/0x460 [<00000383e9da123c>] ksys_write+0x7c/0x100 [<00000383eaa7284e>] __do_syscall+0x15e/0x280 [<00000383eaa8417e>] system_call+0x6e/0x90 INFO: lockdep is turned off. It is not allowed to take the mmap_lock while in atomic context. Therefore handle such a secure storage access fault as if the accessed page is not mapped: the uaccess function will return -EFAULT, and the caller has to deal with this. Usually this means that the access is retried in process context, which allows to resolve the page fault (or in this case export the page).

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential deadlock when reconnecting channels Fix cifs_signal_cifsd_for_reconnect() to take the correct lock order and prevent the following deadlock from happening ====================================================== WARNING: possible circular locking dependency detected 6.16.0-rc3-build2+ #1301 Tainted: G S W ------------------------------------------------------ cifsd/6055 is trying to acquire lock: ffff88810ad56038 (&tcp_ses->srv_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x134/0x200 but task is already holding lock: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&ret_buf->chan_lock){+.+.}-{3:3}: validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_setup_session+0x81/0x4b0 cifs_get_smb_ses+0x771/0x900 cifs_mount_get_session+0x7e/0x170 cifs_mount+0x92/0x2d0 cifs_smb3_do_mount+0x161/0x460 smb3_get_tree+0x55/0x90 vfs_get_tree+0x46/0x180 do_new_mount+0x1b0/0x2e0 path_mount+0x6ee/0x740 do_mount+0x98/0xe0 __do_sys_mount+0x148/0x180 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&ret_buf->ses_lock){+.+.}-{3:3}: validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_match_super+0x101/0x320 sget+0xab/0x270 cifs_smb3_do_mount+0x1e0/0x460 smb3_get_tree+0x55/0x90 vfs_get_tree+0x46/0x180 do_new_mount+0x1b0/0x2e0 path_mount+0x6ee/0x740 do_mount+0x98/0xe0 __do_sys_mount+0x148/0x180 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&tcp_ses->srv_lock){+.+.}-{3:3}: check_noncircular+0x95/0xc0 check_prev_add+0x115/0x2f0 validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_signal_cifsd_for_reconnect+0x134/0x200 __cifs_reconnect+0x8f/0x500 cifs_handle_standard+0x112/0x280 cifs_demultiplex_thread+0x64d/0xbc0 kthread+0x2f7/0x310 ret_from_fork+0x2a/0x230 ret_from_fork_asm+0x1a/0x30 other info that might help us debug this: Chain exists of: &tcp_ses->srv_lock --> &ret_buf->ses_lock --> &ret_buf->chan_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ret_buf->chan_lock); lock(&ret_buf->ses_lock); lock(&ret_buf->chan_lock); lock(&tcp_ses->srv_lock); *** DEADLOCK *** 3 locks held by cifsd/6055: #0: ffffffff857de398 (&cifs_tcp_ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x7b/0x200 #1: ffff888119c64060 (&ret_buf->ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x9c/0x200 #2: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200

In the Linux kernel, the following vulnerability has been resolved: __legitimize_mnt(): check for MNT_SYNC_UMOUNT should be under mount_lock ... or we risk stealing final mntput from sync umount - raising mnt_count after umount(2) has verified that victim is not busy, but before it has set MNT_SYNC_UMOUNT; in that case __legitimize_mnt() doesn't see that it's safe to quietly undo mnt_count increment and leaves dropping the reference to caller, where it'll be a full-blown mntput(). Check under mount_lock is needed; leaving the current one done before taking that makes no sense - it's nowhere near common enough to bother with.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix region locking in hash types Region locking introduced in v5.6-rc4 contained three macros to handle the region locks: ahash_bucket_start(), ahash_bucket_end() which gave back the start and end hash bucket values belonging to a given region lock and ahash_region() which should give back the region lock belonging to a given hash bucket. The latter was incorrect which can lead to a race condition between the garbage collector and adding new elements when a hash type of set is defined with timeouts.