CVE Database

In Eclipse OpenJ9 versions up to 0.63, opening a supplied diagnostic dump bundle with the jdmpview tool, or equivalent DTFJ code, may cause the analyst's machine to read an arbitrary local file named inside the bundle and send its contents to an arbitrary remote host.

A malicious USB MTP/PTP device can cause the USBX host to read past a heap buffer during ordinary object enumeration, leaking adjacent heap contents to the application or faulting on an unmapped page.

A memory-protected ThreadX module's queue request reaches the Module Manager's dispatch layer, which decides how much of the module's buffer the privileged queue copy may touch and hands that extent to the module port's range check. A queue's `tx_queue_message_size` is a count of `ULONG`s and the copy moves that many words, so the extent is `message_size * sizeof(ULONG)` bytes. The front-send dispatcher passed the word count itself. `tx_queue_send` and `tx_queue_receive`, either side of it in the same header, have always multiplied. A source buffer ending `message_size` bytes into memory the module may read was therefore accepted, and `_txe_queue_front_send` then read `message_size * sizeof(ULONG)` bytes from it in privileged mode — `3 * message_size` bytes past the end of what the module is allowed to read. The words are written into the queue's message area, so a module that can receive from that queue reads them back.

The GUIX software JPEG decoder reads four kinds of marker segment without checking that each is long enough to hold what it reads. A truncated segment is therefore read past the end of the caller's image buffer. Separately, a zero chroma sampling factor makes the block decode loop non-terminating. Both reproduce in the default configuration, in which `GX_SOFTWARE_DECODER_SUPPORT` is enabled.

`_gx_binres_pixelmap_table_load()` in the GUIX binary resource (theme) loader indexes the pixelmap table with a value read verbatim from the resource file and never bounds it against the table size. A crafted theme drives a write of up to roughly 256 KB past the end of the table. The overflowed buffer is allocated by GUIX itself, through `_gx_system_memory_allocator`, rather than supplied by the caller, so the loader corrupts its own arena. The public API `gx_binres_theme_load()` takes no size parameter, so no amount of caller diligence prevents this. Reproduces in the shipped default configuration; `GX_BINARY_RESOURCE_SUPPORT` is enabled by default.

`gx_binres_theme_load()` and `gx_binres_font_load()` take the resource as a bare `GX_UBYTE *` with no length, and `GX_BINRES_DATA_INFO` has no field to carry one. Every read is therefore performed at an offset the file itself chose, against a buffer whose extent the loader does not know. A resource that declares more data than it contains is read past its end, and an offset stored in the file is turned into a pointer without being bounded. This is a distinct defect from GHSA-hgcj-22cg-4hfv, which was an underflowed glyph count. It needs no underflow and no wrapped multiply: a perfectly well-formed, narrow glyph range reaches it.

The GUIX JPEG software decoder enforces no ordering on JPEG markers. A file that places a second `SOF0` frame header after `SOS` re-runs the frame header parser after the output buffer has already been allocated and its geometry latched. The decoder returns `GX_SUCCESS` and publishes a `GX_PIXELMAP` whose reported dimensions and `data_size` exceed the allocation behind it. Any consumer that trusts the returned structure reads out of bounds, including GUIX's own display drivers, reached through the ordinary draw path. Reproduces in the shipped default configuration; `GX_SOFTWARE_DECODER_SUPPORT` is enabled by default.

A security vulnerability has been detected in MinIO up to RELEASE.2025-10-15T17-29-55Z. This issue affects the function globalDeploymentID/SessionTokenAuthenticate of the file cmd/common-main.go of the component Embedded Console. Such manipulation leads to use of hard-coded cryptographic key . It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Nerimity Desktop up to 2.2.2. Affected by this issue is the function shell.openExternal of the file src/mainWindow.js of the component Window Open Handler. The manipulation of the argument url results in improper authorization in handler for custom url scheme. The attack can be executed remotely. The exploit has been made public and could be used. Upgrading to version 2.3.3 can resolve this issue. The patch is identified as f4df21bbc290f6c1956d899cf4da9e963074a6e4. You should upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product.

launch-editor allows users to open files with line numbers in editor from Node.js. Prior to 2.14.2, when an attacker can create a filesystem entry beginning with plus or minus in the working directory, an affected editor is selected, and the path can remain relative or is converted to a relative WSL path, launchEditor forwards the path without forcing it to be interpreted as a positional filename. Editor option parsing then treats the attacker-controlled filename as a command-line flag, which can cause unintended file overwrite or arbitrary command execution by the selected editor. The affected editors are Vim and gVim, MacVim, Emacs and Emacsclient, and Notepad++ when a plugin exposes dangerous operations; WSL path conversion keeps Vite and newer middleware callers exposed. This issue is fixed in version 2.14.2.

launch-editor allows users to open files with line numbers in editor from Node.js. Prior to 2.14.2, launch-editor did not escape % on Windows when passing an argument to cmd. When an environment variable contained a malicious value, it was possible that that content to be executed. This vulnerability is fixed in 2.14.2.

filelock is a platform-independent file lock for Python. From 3.22.0 until 4.2.1, SoftFileLock can trust a forged process identifier in a marker that an attacker can modify but cannot remove, allowing an authorized contender such as another process of the holder's account or root to act as a confused deputy, remove the live marker, and admit another holder. This issue is fixed in version 4.2.1.

filelock is a platform-independent file lock for Python. From 4.1.0 until 4.2.1, ReadWriteLock can remove a randomized .filelock-* private-hard-link directory during cleanup, allowing another local user with rename access in a non-sticky parent to observe a live name or forge a dead-owner sweep name and rename a sibling directory onto it for deletion. This issue is fixed in version 4.2.1.

filelock is a platform-independent file lock for Python. From 3.20.4 until 4.0.9, ReadWriteLock and AsyncReadWriteLock versions from 3.20.4 resolve the lock path and pass it to SQLite without rejecting a final symbolic link, allowing another local user who can create names in the lock directory to redirect database creation and locking or split mutual exclusion between targets. This issue is fixed in version 4.0.9.

filelock is a platform-independent file lock for Python. From 3.22.0 until 4.2.1, SoftFileLock can break a stale marker after an attacker frees its own marker following the stale read, an honest contender creates a live successor on the reused inode, and the successor's modification time is not newer than the saved observation, causing the live marker to be removed and two holders to be admitted. This issue is fixed in version 4.2.1.

filelock is a platform-independent file lock for Python. From 4.0.0 until 4.2.1, SoftReadWriteLock refreshes holder records by name, allowing another local user with rename access to the lock directory to replace a record with a named pipe and stall the lock, or under a permissive hard-link policy to link a reachable target file and cause the lock user to write through it. This issue is fixed in version 4.2.1.

filelock is a platform-independent file lock for Python. From 3.20.4 until 4.2.1, ReadWriteLock can open a crafted SQLite lock database without bounding schema and query work, allowing another local user who can replace the database to make acquisition stall or hang; versions from 3.20.4 expose this on initial per-instance opening, and versions from 3.30.0 repeat the exposure on every acquisition. This issue is fixed in version 4.2.1.

filelock is a platform-independent file lock for Python. From 4.1.0 until 4.2.1, SoftFileLock can restore a stale marker by name after moving it aside, allowing another local user with rename access in a non-sticky lock directory to swap in a symbolic link and, on a runtime that follows the link and a same-filesystem target, make the lock user hard-link one of its files into the lock directory. This issue is fixed in version 4.2.1.

filelock is a platform-independent file lock for Python. From 3.30.0 until 4.2.1, StrictSoftFileLock versions from 3.30.0 and SoftReadWriteLock versions from 4.0.0 can adopt a protocol directory created first by another local user in a shared parent directory, allowing that user to alter protocol state and admit concurrent holders. This issue is fixed in version 4.2.1.

filelock is a platform-independent file lock for Python. Prior to 4.2.1, UnixFileLock can truncate a regular file renamed onto the lock path when another local user has actual rename permission, or hard-linked there under a permissive hard-link policy; when an explicit mode is requested, affected versions from 3.10.2 can also change that file's mode. This issue is fixed in version 4.2.1.

filelock is a platform-independent file lock for Python. From 4.1.0 until 4.2.1, SoftFileLock versions from 4.1.0 can reuse a stale observation when an attacker pre-dates and removes its own marker, at least two lock-user processes are waiting, coarse or matching modification times preserve the observation, and an honest contender creates a fresh marker on the reused inode, causing that live marker to be removed as stale. This issue is fixed in version 4.2.1.

Missing Authorization vulnerability in Castos Seriously Simple Podcasting seriously-simple-podcasting allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Seriously Simple Podcasting: from n/a through 3.17.0.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Castos Seriously Simple Podcasting seriously-simple-podcasting allows Stored XSS.This issue affects Seriously Simple Podcasting: from n/a through 3.17.0.

A2A Java SDK is the official Java SDK for the Agent2Agent (A2A) Protocol. Prior to 1.3.0.Final, RestHandler.parseRequestBody in `transport/rest/src/main/java/org/a2aproject/sdk/transport/rest/handler/RestHandler.java` logs the entire JSON request body at SEVERE level when JsonFormat.parser().merge() throws InvalidProtocolBufferException. With push notifications enabled, createTaskPushNotificationConfiguration reaches this parser for requests to `/v1/tenants/{tenant}/tasks/{taskId}/pushNotificationConfigs`, whose token and authentication.credentials fields can contain bearer tokens and authentication credentials for client push endpoints. A valid JSON body that fails protobuf deserialization, including an unknown field under strict parsing or a schema mismatch, causes those secrets to be written to the server logs in cleartext. An attacker with access to the server logs or a log aggregation system can retrieve the credentials and potentially use the credentials to send forged task status updates to the client's push notification endpoint. This issue is fixed in version 1.3.0.Final.

A2A Java SDK is the official Java SDK for the Agent2Agent (A2A) Protocol. Prior to 1.3.0.Final, BasePushNotificationSender in server-common sends task data to the URL in TaskPushNotificationConfig without destination validation, scheme restrictions, or bounds on redirects. InMemoryPushNotificationConfigStore.setInfo stores the URL verbatim, and onCreateTaskPushNotificationConfig does not validate the destination. In the default deployment with push notifications enabled, an unauthenticated caller can register a destination through an inline SendMessage configuration or CreateTaskPushNotificationConfig for an existing task, causing task status and artifact updates to send requests from the server's network position to loopback, private, link-local cloud-metadata, IPv6 unique-local, unspecified, or multicast destinations where routing permits. JdkA2AHttpClient and VertxA2AHttpClient follow redirects, allowing a webhook redirect to bypass creation-time destination checks and convert a POST into a GET; hostname-only checks also do not prevent DNS rebinding. Direct POST delivery can push attacker-influenced task data into internal services, whereas a redirected POST-to-GET request drops the body. The sender discards the fetched response and does not expose delivery success or failure, so the demonstrated behavior does not provide response read-back. No credentials or user interaction are required. This issue is fixed in version 1.3.0.Final.