Linux Linux Kernel vulnerabilities

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band() Simplify the code by using device managed memory allocations. This also fixes a memory leak in rtw_register_hw(). The supported bands were not freed in the error path. Copied from commit 145df52a8671 ("wifi: rtw89: Convert rtw89_core_set_supported_band to use devm_*").

In the Linux kernel, the following vulnerability has been resolved: most: core: fix resource leak in most_register_interface error paths The function most_register_interface() did not correctly release resources if it failed early (before registering the device). In these cases, it returned an error code immediately, leaking the memory allocated for the interface. Fix this by initializing the device early via device_initialize() and calling put_device() on all error paths. The most_register_interface() is expected to call put_device() on error which frees the resources allocated in the caller. The put_device() either calls release_mdev() or dim2_release(), depending on the caller. Switch to using device_add() instead of device_register() to handle the split initialization.

In the Linux kernel, the following vulnerability has been resolved: hfsplus: ensure sb->s_fs_info is always cleaned up When hfsplus was converted to the new mount api a bug was introduced by changing the allocation pattern of sb->s_fs_info. If setup_bdev_super() fails after a new superblock has been allocated by sget_fc(), but before hfsplus_fill_super() takes ownership of the filesystem-specific s_fs_info data it was leaked. Fix this by freeing sb->s_fs_info in hfsplus_kill_super().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: annotate data-races around hdev->req_status __hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock: hdev->req_status = HCI_REQ_PEND; However, several other functions read or write hdev->req_status without holding any lock: - hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue) - hci_cmd_sync_complete() reads/writes from HCI event completion - hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write - hci_abort_conn() reads in connection abort path Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while hci_send_cmd_sync() runs on hdev->workqueue, these are different workqueues that can execute concurrently on different CPUs. The plain C accesses constitute a data race. Add READ_ONCE()/WRITE_ONCE() annotations on all concurrent accesses to hdev->req_status to prevent potential compiler optimizations that could affect correctness (e.g., load fusing in the wait_event condition or store reordering).

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix zero size inode with non-zero size after log replay When logging that an inode exists, as part of logging a new name or logging new dir entries for a directory, we always set the generation of the logged inode item to 0. This is to signal during log replay (in overwrite_item()), that we should not set the i_size since we only logged that an inode exists, so the i_size of the inode in the subvolume tree must be preserved (as when we log new names or that an inode exists, we don't log extents). This works fine except when we have already logged an inode in full mode or it's the first time we are logging an inode created in a past transaction, that inode has a new i_size of 0 and then we log a new name for the inode (due to a new hardlink or a rename), in which case we log an i_size of 0 for the inode and a generation of 0, which causes the log replay code to not update the inode's i_size to 0 (in overwrite_item()). An example scenario: mkdir /mnt/dir xfs_io -f -c "pwrite 0 64K" /mnt/dir/foo sync xfs_io -c "truncate 0" -c "fsync" /mnt/dir/foo ln /mnt/dir/foo /mnt/dir/bar xfs_io -c "fsync" /mnt/dir <power fail> After log replay the file remains with a size of 64K. This is because when we first log the inode, when we fsync file foo, we log its current i_size of 0, and then when we create a hard link we log again the inode in exists mode (LOG_INODE_EXISTS) but we set a generation of 0 for the inode item we add to the log tree, so during log replay overwrite_item() sees that the generation is 0 and i_size is 0 so we skip updating the inode's i_size from 64K to 0. Fix this by making sure at fill_inode_item() we always log the real generation of the inode if it was logged in the current transaction with the i_size we logged before. Also if an inode created in a previous transaction is logged in exists mode only, make sure we log the i_size stored in the inode item located from the commit root, so that if we log multiple times that the inode exists we get the correct i_size. A test case for fstests will follow soon.

In the Linux kernel, the following vulnerability has been resolved: srcu: Use irq_work to start GP in tiny SRCU Tiny SRCU's srcu_gp_start_if_needed() directly calls schedule_work(), which acquires the workqueue pool->lock. This causes a lockdep splat when call_srcu() is called with a scheduler lock held, due to: call_srcu() [holding pi_lock] srcu_gp_start_if_needed() schedule_work() -> pool->lock workqueue_init() / create_worker() [holding pool->lock] wake_up_process() -> try_to_wake_up() -> pi_lock Also add irq_work_sync() to cleanup_srcu_struct() to prevent a use-after-free if a queued irq_work fires after cleanup begins. Tested with rcutorture SRCU-T and no lockdep warnings. [ Thanks to Boqun for similar fix in patch "rcu: Use an intermediate irq_work to start process_srcu()" ]

In the Linux kernel, the following vulnerability has been resolved: x86: shadow stacks: proper error handling for mmap lock 김영민 reports that shstk_pop_sigframe() doesn't check for errors from mmap_read_lock_killable(), which is a silly oversight, and also shows that we haven't marked those functions with "__must_check", which would have immediately caught it. So let's fix both issues.

In the Linux kernel, the following vulnerability has been resolved: soc: qcom: pd-mapper: Fix element length in servreg_loc_pfr_req_ei It looks element length declared in servreg_loc_pfr_req_ei for reason not matching servreg_loc_pfr_req's reason field due which we could observe decoding error on PD crash. qmi_decode_string_elem: String len 81 >= Max Len 65 Fix this by matching with servreg_loc_pfr_req's reason field.

In the Linux kernel, the following vulnerability has been resolved: xfrm: account XFRMA_IF_ID in aevent size calculation xfrm_get_ae() allocates the reply skb with xfrm_aevent_msgsize(), then build_aevent() appends attributes including XFRMA_IF_ID when x->if_id is set. xfrm_aevent_msgsize() does not include space for XFRMA_IF_ID. For states with if_id, build_aevent() can fail with -EMSGSIZE and hit BUG_ON(err < 0) in xfrm_get_ae(), turning a malformed netlink interaction into a kernel panic. Account XFRMA_IF_ID in the size calculation unconditionally and replace the BUG_ON with normal error unwinding.

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Fix memory leak of BO array in hang state The hang state's BO array is allocated separately with kzalloc() in vc4_save_hang_state() but never freed in vc4_free_hang_state(). Add the missing kfree() for the BO array before freeing the hang state struct.

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Fix a memory leak in hang state error path When vc4_save_hang_state() encounters an early return condition, it returns without freeing the previously allocated `kernel_state`, leaking memory. Add the missing kfree() calls by consolidating the early return paths into a single place.

In the Linux kernel, the following vulnerability has been resolved: net: lapbether: handle NETDEV_PRE_TYPE_CHANGE lapbeth_data_transmit() expects the underlying device type to be ARPHRD_ETHER. Returning NOTIFY_BAD from lapbeth_device_event() makes sure bonding driver can not break this expectation.

In the Linux kernel, the following vulnerability has been resolved: net: airoha: Fix memory leak in airoha_qdma_rx_process() If an error occurs on the subsequents buffers belonging to the non-linear part of the skb (e.g. due to an error in the payload length reported by the NIC or if we consumed all the available fragments for the skb), the page_pool fragment will not be linked to the skb so it will not return to the pool in the airoha_qdma_rx_process() error path. Fix the memory leak partially reverting commit 'd6d2b0e1538d ("net: airoha: Fix page recycling in airoha_qdma_rx_process()")' and always running page_pool_put_full_page routine in the airoha_qdma_rx_process() error path.

In the Linux kernel, the following vulnerability has been resolved: bridge: guard local VLAN-0 FDB helpers against NULL vlan group When CONFIG_BRIDGE_VLAN_FILTERING is not set, br_vlan_group() and nbp_vlan_group() return NULL (br_private.h stub definitions). The BR_BOOLOPT_FDB_LOCAL_VLAN_0 toggle code is compiled unconditionally and reaches br_fdb_delete_locals_per_vlan_port() and br_fdb_insert_locals_per_vlan_port(), where the NULL vlan group pointer is dereferenced via list_for_each_entry(v, &vg->vlan_list, vlist). The observed crash is in the delete path, triggered when creating a bridge with IFLA_BR_MULTI_BOOLOPT containing BR_BOOLOPT_FDB_LOCAL_VLAN_0 via RTM_NEWLINK. The insert helper has the same bug pattern. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000056: 0000 [#1] KASAN NOPTI KASAN: null-ptr-deref in range [0x00000000000002b0-0x00000000000002b7] RIP: 0010:br_fdb_delete_locals_per_vlan+0x2b9/0x310 Call Trace: br_fdb_toggle_local_vlan_0+0x452/0x4c0 br_toggle_fdb_local_vlan_0+0x31/0x80 net/bridge/br.c:276 br_boolopt_toggle net/bridge/br.c:313 br_boolopt_multi_toggle net/bridge/br.c:364 br_changelink net/bridge/br_netlink.c:1542 br_dev_newlink net/bridge/br_netlink.c:1575 Add NULL checks for the vlan group pointer in both helpers, returning early when there are no VLANs to iterate. This matches the existing pattern used by other bridge FDB functions such as br_fdb_add() and br_fdb_delete().