Linux Linux vulnerabilities

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: Do not WARN on remotely-controlled oversized SGL allocations When fuzzing the nvme target code, I tripped a kernel warning in nvmet_tcp_map_data() because the length passed into the allocator is controlled by the remote initiator. A remote initiator that sends a command with an SGL claiming a huge number, can create a scatterlist and iovec allocation of over 1 million entries, which causes the backing kmalloc call to exceed MAX_PAGE_ORDER and then the page allocator will trip on a WARN_ON_ONCE_GFP() message: WARNING: mm/page_alloc.c:5280 __alloc_frozen_pages_noprof Workqueue: nvmet_tcp_wq nvmet_tcp_io_work ... sgl_alloc_order nvmet_tcp_map_data nvmet_tcp_try_recv_pdu As it's never good to trip a kernel warning remotely due to many systems having panic-on-warn enabled, let's silence it by just add GFP_NOWARN to the allocation flags.

In the Linux kernel, the following vulnerability has been resolved: nvmet: pci-epf: fix use-after-free in nvmet_pci_epf_exec_iod_work() nvmet_pci_epf_exec_iod_work() submits an I/O command with req->execute() and then waits for the command to complete and transfers the data back to the host. This wait is not needed for commands that do not transfer data from the device to the host. To decide whether that wait is needed, it reads iod->data_len and iod->dma_dir after calling req->execute(). However, once req->execute() is called, the command may complete asynchronously on another CPU. For commands that do not require a device-to-host data transfer, nvmet_pci_epf_queue_response() calls nvmet_pci_epf_complete_iod() directly, which can free the iod before it reads iod->data_len and iod->dma_dir, resulting in the KFENCE use-after- free: BUG: KFENCE: use-after-free read in nvmet_pci_epf_exec_iod_work+0x288/0x798 [nvmet_pci_epf] Use-after-free read at 0x00000000fdfa6d03 (in kfence-#63): nvmet_pci_epf_exec_iod_work+0x288/0x798 [nvmet_pci_epf] process_one_work+0x15c/0x4f0 worker_thread+0x18c/0x30c kthread+0x130/0x140 ret_from_fork+0x10/0x20 kfence-#63: 0x00000000e3de0e71-0x00000000c938ad62, size=712, cache=kmalloc-1k allocated by task 10 on cpu 0 at 73.995480s (0.005122s ago): mempool_kmalloc+0x1c/0x28 mempool_alloc_noprof+0x40/0x9c nvmet_pci_epf_poll_sqs_work+0xd4/0x344 [nvmet_pci_epf] process_one_work+0x15c/0x4f0 worker_thread+0x18c/0x30c kthread+0x130/0x140 ret_from_fork+0x10/0x20 freed by task 131 on cpu 3 at 73.995521s (0.008385s ago): mempool_kfree+0x10/0x20 mempool_free+0x44/0x64 nvmet_pci_epf_free_iod+0x88/0x98 [nvmet_pci_epf] nvmet_pci_epf_cq_work+0xfc/0x280 [nvmet_pci_epf] process_one_work+0x15c/0x4f0 worker_thread+0x18c/0x30c kthread+0x130/0x140 ret_from_fork+0x10/0x20 Fix this by referring to iod->data_len and iod->dma_dir before calling req->execute(). The remaining iod accesses such as iod->status are only reached on the device-to-host read path. In this case, nvmet_pci_epf_queue_response() signals iod->done instead of freeing the iod, so the iod stays valid.

In the Linux kernel, the following vulnerability has been resolved: fbdev: serialize mode sysfs access with lock_fb_info() show_mode(), show_modes(), and store_mode() access fb_info->modelist and fb_info->mode without holding lock_fb_info(). store_modes() takes lock_fb_info() while replacing the modelist and freeing the old one. A concurrent reader or writer can load a pointer to an old modelist entry before store_modes() frees it, then dereference freed memory or store a stale freed pointer in fb_info->mode. Take lock_fb_info() in show_mode(), show_modes(), and store_mode() to serialize with store_modes(). In show_mode(), copy the mode to the stack and format after dropping the lock. In store_mode(), split activate() into a _locked variant to avoid double-locking, and hold the locks for the modelist walk, mode conversion, activation, and fb_info->mode assignment together.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: fix memory leak from alloc-during-teardown race mptcp_pm_destroy() empties msk->pm.anno_list and msk->pm.userspace_pm_local_addr_list under msk->pm.lock during socket teardown, dropping the lock between the two. A concurrent userspace PM genl ANNOUNCE on the same msk holds a sock reference via mptcp_token_get_sock() and, in mptcp_pm_nl_announce_doit(), calls mptcp_userspace_pm_append_new_local_addr() and mptcp_pm_announced_alloc(). Both take msk->pm.lock briefly to add to their respective lists. Because the genl handler holds a sock reference, mptcp_pm_destroy() may run on the same msk via mptcp_disconnect(), which invokes mptcp_destroy_common() without dropping the sock refcount, before the handler completes. If the lock acquisitions interleave such that mptcp_pm_destroy() empties a list first, the later alloc adds its entry to a list head that nothing else iterates for this msk, and the entry leaks. kmemleak reports both mptcp_pm_add_addr objects (from mptcp_pm_announced_alloc()) and mptcp_pm_addr_entry objects (from mptcp_userspace_pm_append_new_local_addr()) under sustained concurrent ANNOUNCE + close load against the userspace PM. Add an MPTCP_PM_DESTROYING bit in msk->pm.status, set by mptcp_pm_destroy() under pm.lock before the lists are emptied and checked under pm.lock by the alloc paths. Either the alloc takes pm.lock first, in which case its entry is on the list when mptcp_pm_destroy() frees it; or mptcp_pm_destroy() takes pm.lock first, in which case the later alloc observes the bit and refuses. Found by an MPTCP protocol-flow harness extending BRF (arXiv:2305.08782).

In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: prevent unbounded recursion in magicmouse_raw_event() magicmouse_raw_event() handles DOUBLE_REPORT_ID (0xf7) packets, which pack two touch reports into one, by splitting the packet and calling itself on each half. The only guard against runaway recursion is a "size < 1" check, which stops zero-sized calls but does not bound the recursion depth. A malicious HID device that matches this driver can send a report starting with DOUBLE_REPORT_ID and filled with the sequence [0xf7, 0x00]. Each level consumes two bytes and recurses on the remainder, so an incoming report of up to HID_MAX_BUFFER_SIZE (16 KiB) drives roughly 8000 nested calls. That easily exhausts the 16 KiB kernel stack, leading to a stack overflow: a panic with CONFIG_VMAP_STACK, or memory corruption without it. A double report only ever wraps two normal reports; it is never legitimately nested. Refuse to re-enter the DOUBLE_REPORT_ID case from a recursive call so the recursion depth is bounded to two, while all valid packets keep being parsed exactly as before.

In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: do not keep a stale msc->input if no input is claimed magicmouse_input_mapping() caches the first hid_input's input_dev in msc->input while the report descriptor is parsed, and the rest of the driver treats a non-NULL msc->input as proof that an input device was registered. That does not hold on the hid-input error path. If hidinput_connect() fails -- for instance because input_register_device() returns an error -- it unwinds through hidinput_disconnect(), which frees every input_dev it created, including the one cached in msc->input. The failure does not abort the probe. hid_connect() only skips the claim: if ((connect_mask & HID_CONNECT_HIDINPUT) && !hidinput_connect(hdev, connect_mask & HID_CONNECT_HIDINPUT_FORCE)) hdev->claimed |= HID_CLAIMED_INPUT; and the "device has no listeners" bailout below it does not fire for this driver, which sets ->raw_event; on the USB Magic Mouse 2 / Magic Trackpad 2 paths hidraw and hiddev are claimed as well. hid_hw_start() therefore returns 0 and magicmouse_probe() continues with msc->input pointing at freed memory. Being non-NULL, it passes the "input not registered" check in probe and the NULL checks in ->raw_event and ->event, so the next input report dereferences freed memory. Clear msc->input when the HID core did not claim an input device, so the existing NULL checks cover this case as well.

In the Linux kernel, the following vulnerability has been resolved: fbdev: Wrap user-invoked calls to fb_set_var() in helper Handle fbcon during display updates in fb_set_var_from_user(). Check with fbcon if the mode change is possible, update hardware state and finally update fbcon. Update all callers. Only the FBIOPUT_VSCREENINFO ioctl currently does all steps. Other mode-changes callers in sysfs and driver code are missing fbcon-related steps. With the new helper, ps3fb and sh_mobile_lcdcfb no longer maintain fbcon state themselves.

In the Linux kernel, the following vulnerability has been resolved: HID: core: fix OOB read of field->usage in hid_set_field() hid_set_field() hands field->usage + offset to hid_dump_input() before the guard that bounds offset: hid_dump_input(field->report->device, field->usage + offset, value); if (offset >= field->report_count) { hid_err(...); return -1; } Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is allocated inline with the hid_field in hid_register_field() and holds field->maxusage entries, so an offset past it reads off the end of the kvzalloc()ed allocation and into a neighbouring object. Had the guard run first, offset < report_count <= maxusage would already have confined the pointer to the array. A caller supplies such an offset today. picolcd_fb_send_tile() validates only report->maxfield before issuing hid_set_field(report->field[0], 11 + i, ...) for i = 0..31, so its offsets are fixed at 11..42 and are never checked against the bound field. When the device registers that field with fewer usages, the framebuffer deferred-io work drives the read on every tile. KASAN reports a 4-byte slab-out-of-bounds read in hid_dump_input() below hid_set_field(), and the same boot logs "offset (1) exceeds report_count (1)" from the guard that runs only afterwards. Move the hid_dump_input() call below the guard. Because field->maxusage >= field->report_count, the guard then establishes that field->usage + offset lies inside the array before it is dereferenced, for every caller and without changing behaviour on the valid path. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>

In the Linux kernel, the following vulnerability has been resolved: HID: pidff: fix OOB write when hid->inputs is empty hid_pidff_init_with_quirks() derives its input_dev from list_entry(hid->inputs.next, struct hid_input, list) without first checking that hid->inputs is non-empty. The list member of struct hid_input is at offset 0, so on an empty list list_entry() yields &hid->inputs itself and the following hidinput->input load reads an unrelated member of struct hid_device. dev is then a type-confused pointer, and force-feedback init writes through it: each set_bit(FF_*, dev->ffbit) stores 8 bytes at dev + 192, past the end of the object dev actually aliases, and input_ff_create() adds further writes of a heap pointer and two function pointers. Until hid-universal-pidff the only caller was hid_pidff_init() from usbhid, which runs under HID_CLAIMED_INPUT and therefore always has at least one hid_input. universal_pidff_probe() starts the device with HID_CONNECT_DEFAULT & ~HID_CONNECT_FF and then calls hid_pidff_init_with_quirks() directly whenever the descriptor carries a PID usage page, bypassing that gate. A report descriptor whose only application collection is on HID_UP_PID leaves hid->inputs empty while hid_connect() still succeeds through the hidraw claim, so probe reaches the unguarded list_entry(). The write happens in the USB probe path, on the hotplug workqueue, so plugging in a malicious device is enough to trigger it; no attacker software and no logged-in user are required. KASAN reports an 8-byte out-of-bounds write in hid_pidff_init_with_quirks() reached from universal_pidff_probe(). Check for an empty list before deriving dev and return -ENODEV, as the other HID force-feedback drivers already do. universal_pidff_probe() propagates the error and unwinds. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>

In the Linux kernel, the following vulnerability has been resolved: net/ionic: avoid OOB TX partner lookup for hwstamp RXQ The dedicated hardware timestamp RX queue is allocated with q->index equal to lif->ionic->nrxqs_per_lif. The normal txqcqs array only contains the regular queue pairs, so using that index to set rxq->partner can read one entry past txqcqs[] and then write through the derived pointer. Only link RX/TX partners for normal queue-pair indexes. Leave the hwstamp RX queue unpaired, and make the XDP_TX path abort cleanly if an RX queue has no TX partner.

In the Linux kernel, the following vulnerability has been resolved: futex/pi: Reject cross-mm private futex owners A private futex key borrows the waiter's mm without taking an mm_users reference. Nevertheless, attach_to_pi_owner() currently accepts an owner from a different address space and copies the private key into the owner's PI state. When that owner exits, exit_pi_state_list() uses the saved key to find the hash bucket and acquires a reference to the waiter's private hash. If the last user of the waiter's mm exits concurrently, futex_hash_free() frees the hash while the owner still uses its bucket and reference. Prevent this by validating in attach_to_pi_owner() that, for private futexes, the owner mm and waiter mm are the same. Perform the check with the owner's pi_lock held and after validating owner::futex::state to serialize against a concurrent PI-state exit cleanup. [ tglx: Amended comment ]

In the Linux kernel, the following vulnerability has been resolved: futex/pi: Plug private futex exec() race The check for private futexes whether the waiter's mm, which is stored in the futex_key and copied into the pi_state, is the same as the owner's mm is not sufficient for exec(). exec() has a gap where the mm check fails to give the correct answer: exec() ... exec_release_mm() futex_exec_release() tsk::futex::exit_state = EXITING; cleanup_robust_list(); 1) tsk::futex::exit_state = OK; ... old_mm = tsk::mm; 2) tsk::mm = ->mm; Between #1 and #2 the check for the mm is wrong as that mm is about to be swapped out and eventually freed. Plug this gap by: 1) Setting tsk::futex::exit_state to FUTEX_STATE_DEAD in futex_exec_release() 2) Setting tsk::futex::exit_state to FUTEX_STATE_OK after the mm has been switched. From a futex point of view the task is dead after it finished the robust list cleanup up to the point where it sets the state to OK again.

In the Linux kernel, the following vulnerability has been resolved: futex: Fix race in futex_pivot_pending() during private hash resize A task performing a custom private hash resize can remain blocked in uninterruptible sleep indefinitely. The hung-task detector reports: INFO: task futex-resizer:314 blocked for more than 10 seconds. task:futex-resizer state:D stack:14824 pid:314 tgid:312 ppid:311 Call Trace: __schedule+0x521/0xf30 schedule+0x22/0xa0 futex_hash_allocate+0x3db/0x490 __do_sys_prctl+0x6f5/0xbd0 do_syscall_64+0xf9/0x530 entry_SYSCALL_64_after_hwframe+0x77/0x7f Kernel panic - not syncing: hung_task: blocked tasks futex_pivot_pending() allows the resize request to continue when either no replacement hash is pending (hash_new == NULL) or the current hash reference count has reached zero. After the final-reference wake, another futex task can complete the pivot between the two observations: T1 T2 futex_hash_allocate() wait_var_event(mm, ...) futex_pivot_pending(mm) hash_new != NULL futex_hash() futex_ref_get(old) -> false futex_pivot_hash(mm) hash_new = NULL __futex_pivot_hash(mm, new) rcu_assign_pointer(hash, new) fph = rcu_dereference(hash) /* new */ futex_ref_is_dead(fph) -> false schedule() The pivot changes the state from hash_new != NULL with a dead current hash to hash_new == NULL with a live current hash. Because futex_pivot_pending() reads hash_new and hash without serialization, the resize task can observe hash_new in the pre-pivot state and hash in the post-pivot state, causing futex_pivot_pending() to return false even though the pivot has completed. The task then goes to sleep after the wakeup has already been consumed. Serialize state reads in futex_pivot_pending() using futex_mm_phash::lock. This guarantees that futex_pivot_pending() observes hash_new and hash atomically, eliminating the race condition.

In the Linux kernel, the following vulnerability has been resolved: futex: Fix race on the initial mm->futex.phash.ref allocation futex_hash_allocate() allocates mm->futex.phash.ref without any locking. Commit d9b05321e21e ("futex: Move futex_hash_free() back to __mmput()") moved the allocation here and assumed that the process has just a single thread at this point. Commit ee9dce44362b ("futex: Drop CLONE_THREAD requirement for private default hash alloc") widened need_futex_hash_allocate_default() to cover any CLONE_VM clone, but left out vfork because the parent is suspended and cannot race. That no longer holds once vfork is nested. If a vfork child calls vfork again and is then killed with SIGKILL, the parent is released from its vfork wait and runs concurrently with the grandchild in the same mm. Neither of them went through futex_hash_allocate_default(). When both call prctl(PR_FUTEX_HASH, PR_FUTEX_HASH_SET_SLOTS) at the same time, each one sees mm->futex.phash.ref as NULL and stores its own percpu counter. Only the last store survives. The counter stored first is no longer reachable from the mm, so the references on it are not seen by __futex_ref_atomic_end(). A private hash that still has references is then considered dead and freed, and a task that still holds one of its buckets writes into freed memory in futex_q_lock(). Store the counter once with cmpxchg() and let the loser free_percpu() its own. The initial reference has to be taken before the store, otherwise another task can install a private hash while the counter is still 0.

In the Linux kernel, the following vulnerability has been resolved: HID: asus: fix missing hid_is_usb() check to_usb_interface() can only be used on a hid_device whose parent is really USB; uhid can create devices that identify as being on BUS_USB, but don't actually have a USB parent. Fix the use of to_usb_interface() without a hid_is_usb() check. I have verified that it is currently possible to trigger a kernel splat due to this bug in an ASAN build, and that this commit fixes the issue.

In the Linux kernel, the following vulnerability has been resolved: HID: huawei: fix missing hid_is_usb() check to_usb_interface() can only be used on a hid_device whose parent is really USB; uhid can create devices that identify as being on BUS_USB, but don't actually have a USB parent. Fix the use of to_usb_interface() without a hid_is_usb() check. I have verified that it is currently possible to trigger a kernel splat due to this bug in an ASAN build, and that this commit fixes the issue.

In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: fix out-of-bounds read in joycon_ctlr_read_handler() joycon_ctlr_read_handler() casts an incoming HID input report to struct joycon_input_report and parses it, guarding the cast only with a 12-byte length check: if (size >= 12) /* make sure it contains the input report */ joycon_parse_report(ctlr, (struct joycon_input_report *)data); struct joycon_input_report is 49 bytes: a 13-byte header followed by a union whose IMU arm is 36 bytes. For an IMU report joycon_parse_report() -> joycon_parse_imu_report() walks that union (struct offsets 13..48), so a report of exactly 12 bytes with data[0] == JC_INPUT_IMU_DATA passes the guard yet is read up to 37 bytes past its declared length. The over-read bytes are decoded into accelerometer/gyroscope values and forwarded to userspace through the "(IMU)" input device, leaking driver-internal memory. data[0] and size are fully controlled by a malicious or spoofed Joy-Con/Pro Controller. Receive buffers are sized to the maximum report length, so this is an over-read within the allocation rather than a slab OOB, but the decoded bytes still reach userspace. The sibling subcmd path in joycon_ctlr_handle_event() already bounds the same cast correctly: if (size < sizeof(struct joycon_input_report) || data[0] != JC_INPUT_SUBCMD_REPLY) break; Use the same sizeof(struct joycon_input_report) bound here.

In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: register input device after capabilities are set input_register_device() exposes the device to userspace immediately. In joycon_input_create() it was called before joycon_config_rumble() configures the FF_RUMBLE capability and the memless force-feedback device, so a concurrent EVIOCSFF could dereference a NULL dev->ff. Registering early also means the initial udev event lacks button and axis information, which can make input managers ignore the device. Move input_register_device() to the end of joycon_input_create(), after all capabilities, the IMU input device and the force-feedback callbacks have been configured.

In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: stop device IO before hid_hw_stop on probe failure nintendo_hid_probe() calls hid_device_io_start() before joycon_init() and joycon_leds_create(). If either fails, the error path jumps to err_close which calls hid_hw_close()/hid_hw_stop() without first calling hid_device_io_stop(). hid_hw_stop() does not stop device IO, so hid_input_report() may still run and access driver data that is being torn down, resulting in a use-after-free. Add an err_io_stop label that calls hid_device_io_stop() before hid_hw_close(), and point the two post-io_start error paths at it.

In the Linux kernel, the following vulnerability has been resolved: HID: rapoo: fix missing hid_is_usb() check to_usb_interface() can only be used on a hid_device whose parent is really USB; uhid can create devices that identify as being on BUS_USB, but don't actually have a USB parent. Fix the use of to_usb_interface() without a hid_is_usb() check. Add a dependency on USB_HID for hid_is_usb(), as other HID drivers do; the alternative would be to provide a simple stub implementation on !USB_HID builds. I have verified that it is currently possible to trigger a kernel splat due to this bug in an ASAN build, and that this commit fixes the issue.

In the Linux kernel, the following vulnerability has been resolved: HID: ft260: fix stack-use-after-return write in I2C read race ft260_i2c_read() points dev->read_buf at a caller-supplied buffer (often an on-stack variable), arms a completion and waits up to five seconds for the device to return the data. The HID input callback ft260_raw_event() runs in the input/IRQ path, independent of the dev->lock mutex held by the read path, and copies the device-supplied payload into dev->read_buf after a plain NULL check. These two paths share read_buf, read_idx and read_len with no serialization. If the device delays its response until the read times out, ft260_i2c_read() resets the controller, clears read_buf and returns, unwinding the stack frame the buffer lived in. A response that arrives at that moment lets ft260_raw_event() pass the NULL check and then memcpy() the device-controlled payload into the now-freed stack location, a bounded but attacker-influenced stack-use-after-return write triggerable by malicious or malfunctioning hardware. Add a dedicated spinlock that serializes every access to read_buf, read_idx and read_len. ft260_raw_event() now holds it across the NULL check, the memcpy and the index update, while the read path takes it when arming and when clearing the buffer, so the teardown can no longer slip between the check and the copy.

In the Linux kernel, the following vulnerability has been resolved: HID: sensor: custom: Fix use-after-free in enable_sensor enable_sensor_store() can call set_power_report_state(), which dereferences sensor_inst->power_state and sensor_inst->report_state. These pointers refer to entries in sensor_inst->fields. Create the field attributes before exposing the enable_sensor sysfs attribute, so enable_sensor cannot be accessed before the state it depends on has been initialized. On remove, delete enable_sensor before freeing the field attributes, so a concurrent sysfs write cannot dereference freed memory through power_state or report_state.

In the Linux kernel, the following vulnerability has been resolved: HID: uclogic: fix use-after-free of inrange_timer on remove uclogic_remove() cancels the pen in-range timer and then stops the device: timer_delete_sync(&drvdata->inrange_timer); hid_hw_stop(hdev); timer_delete_sync() only guarantees the timer is idle at that instant. uclogic_raw_event_pen() keeps delivering pen reports until hid_hw_stop() stops the transport several lines later, and every report with pen->inrange == UCLOGIC_PARAMS_PEN_INRANGE_NONE re-arms the timer: mod_timer(&drvdata->inrange_timer, jiffies + msecs_to_jiffies(100)); A report landing between the timer_delete_sync() call and the transport teardown in hid_hw_stop() re-arms inrange_timer after it was cancelled. uclogic_remove() then returns and the devm drvdata is freed, while hid_hw_stop() has already freed the input device drvdata->pen_input points at, so when the timer fires ~100 ms later uclogic_inrange_timeout() dereferences freed memory -- a use-after-free in timer-softirq context. Swapping the two calls is not a fix: stopping the device first frees drvdata->pen_input via hidinput_disconnect() while the timer may still be pending, so a timer already armed before removal fires on the freed input device in the window before timer_delete_sync() runs. Use timer_shutdown_sync() before hid_hw_stop() instead. It cancels the timer, waits for a running callback while pen_input is still valid, and prevents any further re-arming -- a later mod_timer() from an in-flight report is silently ignored -- so the timer is provably dead before hid_hw_stop() frees the inputs. This is the ordering the timer core documents for this "timer re-armed from another path" teardown case.

In the Linux kernel, the following vulnerability has been resolved: HID: hyperv: validate initial device info bounds The Hyper-V synthetic HID host supplies SYNTH_HID_INITIAL_DEVICE_INFO messages that contain a HID descriptor followed by the report descriptor bytes. mousevsc_on_receive_device_info() trusts bLength and wDescriptorLength without checking that the received packet contains both byte ranges. A malformed host or backend message can therefore make the guest read past the received VMBus packet while copying the report descriptor. Pass the received initial-device-info size into the parser and reject descriptor lengths that exceed the packet. Impact: A malicious Hyper-V host or backend can crash a guest by sending a short initial device-info message with an oversized HID report descriptor length.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: fix LE list UAF on reset hci_cc_reset() clears the LE accept and resolving lists without taking hdev->lock. Other command-complete handlers serialize updates to these lists with that lock, and the debugfs readers hold it while walking them. This permits the reset completion and a debugfs read to interleave as follows: hci_rx_work debugfs reader ----------- -------------- lock hdev->lock fetch current entry list_del(entry) kfree(entry) read entry fields The reader then dereferences a freed list entry and may follow its stale next pointer. KASAN reported: BUG: KASAN: slab-use-after-free in white_list_show+0x15f/0x180 Read of size 1 at addr ffff8881015dab16 by task poc/95 Call Trace: white_list_show+0x15f/0x180 seq_read_iter+0x3ff/0x1190 seq_read+0x267/0x3d0 vfs_read+0x177/0xa20 ksys_read+0xf7/0x1c0 Allocated by task 91: hci_bdaddr_list_add+0x1a6/0x3a0 hci_cc_le_add_to_accept_list+0xab/0x140 hci_cmd_complete_evt+0x26c/0x9a0 hci_event_packet+0x454/0xb20 hci_rx_work+0x293/0x730 Freed by task 90: kfree+0x131/0x3c0 hci_bdaddr_list_clear+0xd8/0x160 hci_cc_reset+0x28a/0x370 hci_cmd_complete_evt+0x26c/0x9a0 hci_event_packet+0x454/0xb20 hci_rx_work+0x293/0x730 Take hdev->lock around both list clears. This matches the existing mutation and traversal locking convention.