Vulnerabilidades do AcademySoftwareFoundation Openexr

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.1.0 through 3.2.10, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13, an int32_t multiplication in OpenEXRCore's unpack_sample_table() can overflow while decoding a crafted deep tiled EXR file, producing an invalid pointer that leads to a read from an unmapped memory address and a crash. Because the overflow occurs in the standard decoding path (exr_decoding_run), any application that decodes deep tiled EXR files is affected. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14.

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. Versions prior to 3.2.10, 3.3.12, and 3.4.13 contain an infinite-loop vulnerability in SampleCountChannel. The helper roundListSizeUp() rounds a sample-list size up to the next power of two using repeated unsigned left shifts, which terminates for normal values but fails for UINT_MAX: the sequence reaches 0x80000000, and the next left shift wraps the 32-bit value to 0. Because 0 remains less than UINT_MAX, the loop never progresses and never exits. The bug is reachable through public OpenEXRUtil APIs, either by editing the sample-count buffer through SampleCountChannel::Edit (whose destructor calls endEdit()) or by calling SampleCountChannel::set(x, y, UINT_MAX) on a valid pixel. This issue has been fixed in versions 3.2.10, 3.3.12, and 3.4.13.

OpenEXR is the reference implementation and specification for the EXR high-dynamic-range image file format, widely used in the motion picture industry. Versions 3.4.0 through 3.4.12 contain a NULL pointer dereference in the OpenEXRCore function exr_attr_set_bytes(). The public setter validates the top-level exr_attr_bytes_t value pointer but does not verify that the nested type_hint pointer is non-NULL when hint_length is greater than zero. When a caller supplies a positive hint_length together with a NULL type_hint, exr_attr_bytes_create() allocates a destination type-hint buffer and then copies from the NULL source pointer, causing a deterministic crash. The flaw is reachable through the public OpenEXRCore C API and results in a denial of service. The issue is fixed in version 3.4.13.

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. Versions prior to 3.2.10, 3.3.12 and 3.4.13 contain a heap out-of-bounds write in Imf_4_0::SampleCountChannel::set(int r, unsigned int newNumSamples[]). The row-based sample-count setter computes the target Y coordinate with dataWindow.min.x instead of dataWindow.min.y. For a valid deep image data window where min.x != min.y, a valid row index can be translated into an invalid Y coordinate, causing writes before the allocated _numSamples buffer. The vulnerability is reachable through the public OpenEXRUtil DeepImage API and can lead to heap corruption and process crashes. This issue has been fixed in versions 3.2.10, 3.3.12 and 3.4.13.

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. From version 3.4.0 through 3.4.13, a crafted HTJ2K-compressed EXR can crash OpenEXR during normal decode. An HTJ2K-compressed EXR whose JPEG 2000 SIZ fields place the first tile outside the visible image can reach invalid tile and codeblock geometry in the vendored OpenJPH AVX2 decoder, causing a stack out-of-bounds write and denial of service. OpenEXR's HTJ2K path validates the decoded codestream dimensions against the EXR chunk size, but it does not reject SIZ image-offset/tile-grid geometry where the first tile does not intersect the image. This issue is fixed in version 3.4.14.

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.4.0 through 3.4.11, the HTJ2K (High-Throughput JPEG 2000) decoder, ht_undo_impl() in OpenEXRCore is vulnerable to a heap-buffer-overflow READ. The ht_undo_imp function copies decoded pixels out of a per-line OpenJPH buffer using the EXR channel's declared width as the iteration count. The codestream embedded in the EXR chunk can declare different (smaller) tile/line dimensions than the EXR header advertises, but ht_undo_impl() does not validate this — it pulls width 32-bit samples from cur_line->i32[] without checking the OpenJPH line buffer's actual length. A crafted EXR file produces a 4-byte heap-buffer-overflow READ immediately after a buffer allocated by ojph::local::codestream::finalize_alloc(). The bug is reachable through the standard scanline-decode entry point used by every consumer of exr_decoding_run/Imf::checkOpenEXRFile, including thumbnailers, asset pipelines, and the exrcheck utility — i.e. any application that opens untrusted EXR files. The result is a deterministic crash (DoS) and potential adjacent-heap leak. This issue has been fixed in version 3.4.12.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. Versions 3.4.0 through 3.4.9 have a signed integer overflow vulnerability in OpenEXR's HTJ2K (High-Throughput JPEG 2000) decompression path. The `ht_undo_impl()` function in `src/lib/OpenEXRCore/internal_ht.cpp` accumulates a bytes-per-line value (`bpl`) using a 32-bit signed integer with no overflow guard. A crafted EXR file with 16,385 FLOAT channels at the HTJ2K maximum width of 32,767 causes `bpl` to overflow `INT_MAX`, producing undefined behavior confirmed by UBSan. On an allocator-permissive host where the required ~64 GB allocation succeeds, the wrapped negative `bpl` value would subsequently be used as a per-scanline pointer advance, which would produce a heap out-of-bounds write. On a memory-constrained host, the allocation fails before `ht_undo_impl()` is entered. This is the second distinct integer overflow in `ht_undo_impl()`. CVE-2026-34545 addressed a different overflow in the same function — the `int16_t p` pixel-loop counter at line ~302 that overflows when iterating over channels whose `width` exceeds 32,767. The CVE-2026-34545 fix did not touch the `int bpl` accumulator at line 211, which is the subject of this advisory. The `bpl` accumulator was also not addressed by any of the 8 advisories in the 2026-04-05 v3.4.9 release batch. This finding is structurally identical to CVE-2026-34588 (PIZ `wcount*nx` overflow in `internal_piz.c`) and should be remediated with the same pattern. The CVE-2026-34588 fix did not touch `internal_ht.cpp`. Version 3.4.10 contains a remediation that addresses the vulnerability in `internal_ht.cpp`.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.2.0 to before 3.2.7, 3.3.9, and 3.4.9, the DWA lossy decoder constructs temporary per-component block pointers using signed 32-bit arithmetic. For a large enough width, the calculation overflows and later decoder stores operate on a wrapped pointer outside the allocated rowBlock backing store. This vulnerability is fixed in 3.2.7, 3.3.9, and 3.4.9.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.2.0 to before 3.2.7, 3.3.9, and 3.4.9, a signed integer overflow exists in undo_pxr24_impl() in src/lib/OpenEXRCore/internal_pxr24.c at line 377. The expression (uint64_t)(w * 3) computes w * 3 as a signed 32-bit integer before casting to uint64_t. When w is large, this multiplication constitutes undefined behavior under the C standard. On tested builds (clang/gcc without sanitizers), two's-complement wraparound commonly occurs, and for specific values of w the wrapped result is a small positive integer, which may allow the subsequent bounds check to pass incorrectly. If the check is bypassed, the decoding loop proceeds to write pixel data through dout, potentially extending far beyond the allocated output buffer. This vulnerability is fixed in 3.2.7, 3.3.9, and 3.4.9.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.4.0 to before 3.4.9, a missing bounds check on the dataWindow attribute in EXR file headers allows an attacker to trigger a signed integer overflow in generic_unpack(). By setting dataWindow.min.x to a large negative value, OpenEXRCore computes an enormous image width, which is later used in a signed integer multiplication that overflows, causing the process to terminate with SIGILL via UBSan. This vulnerability is fixed in 3.4.9.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. In versions 3.3.0 through 3.3.6 and 3.4.0 through 3.4.4, a heap-buffer-overflow (OOB read) occurs in the `istream_nonparallel_read` function in `ImfContextInit.cpp` when parsing a malformed EXR file through a memory-mapped `IStream`. A signed integer subtraction produces a negative value that is implicitly converted to `size_t`, resulting in a massive length being passed to `memcpy`. Versions 3.3.7 and 3.4.5 contain a patch.