Vulnerabilidades do Linux Linux

CVE-2026-68091 Alta · 8.8 CWE-404 10/08/2026

HID: wacom: stop hardware after post-start probe failures

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: stop hardware after post-start probe failures wacom_parse_and_register() starts HID hardware before registering inputs and initializing pad LEDs/remotes. Those later steps can fail, but their error paths currently release Wacom resources without stopping the HID hardware. Route post-hid_hw_start() failures through hid_hw_stop() before releasing driver resources. This issue was identified during our ongoing static-analysis research while reviewing kernel code.

CVE-2026-68090 Desconhecida 10/08/2026

debugobjects: Plug race against a concurrent OOM disable

In the Linux kernel, the following vulnerability has been resolved: debugobjects: Plug race against a concurrent OOM disable syzbot reported a puzzling splat: WARNING: kernel/time/hrtimer.c:443 at stub_timer+0xa/0x20 stub_timer() is installed as timer callback function in hrtimer_fixup_assert_init(), which is invoked when debug_object_assert_init() can't find a shadow object. In that case debug objects emits a warning about it before invoking the fixup. Though the provided console log lacks this warning and instead has the following a few seconds before the splat: ODEBUG: Out of memory. ODEBUG disabled So the object was looked up in debug_object_assert_init() and the lookup failed due a concurrent out of memory situation which disabled debug objects and freed the shadow objects: debug_object_assert_init() if (!debug_objects_enabled) return; obj = alloc(); if (!obj) { // Out of memory debug_objects_enabled = false; free_objects(); obj = lookup_or_alloc(); // The lookup failed because the other side // removed the objects, so this returns // an error code as the object in question // is not statically initialized if (!IS_ERR_OR_NULL(obj)) return; if (!obj) { debug_oom(); return; } print(...) if (!debug_objects_enabled) return; fixup(...) The debug object splat is skipped because debug_objects_enabled is false, but the fixup callback is invoked unconditionally, which makes the timer disfunctional. This is only a problem in debug_object_assert_init() and debug_object_activate() as both have to handle statically initialized objects and therefore must handle the error pointer return case gracefully. All other places only handle the found/not found case and the NULL pointer return is a signal for OOM. Otherwise they get a valid shadow object. Plug the hole by checking whether debug objects are still enabled before invoking the print and fixup function in those two places.

CVE-2026-68089 Desconhecida 10/08/2026

iio: core: fix uninitialized data in debugfs

In the Linux kernel, the following vulnerability has been resolved: iio: core: fix uninitialized data in debugfs If *ppos is non-zero then simple_write_to_buffer() will not initialize the start of buf[]. Non zero values for *ppos aren't going to work anyway. Test for them at the start of the function and return -EINVAL.

CVE-2026-68088 Desconhecida 10/08/2026

usb: gadget: function: rndis: add length check to response query

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: function: rndis: add length check to response query Add variable representations for BufLength and BufOffset in rndis_query_response(), and perform a length check on them. This is identical to how rndis_set_response() handles these parameters.

CVE-2026-68087 Desconhecida 10/08/2026

HID: wacom: use GFP_ATOMIC in wacom_wac_queue_flush()

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: use GFP_ATOMIC in wacom_wac_queue_flush() wacom_wac_queue_flush() is called via the .raw_event callback (wacom_raw_event → wacom_wac_pen_serial_enforce → wacom_wac_queue_flush). For USB HID devices, this callback is invoked from hid_irq_in(), which is a URB completion handler running in atomic context. Using GFP_KERNEL in this path can sleep, leading to a "scheduling while atomic" bug. Use GFP_ATOMIC instead. The existing code already handles allocation failure by skipping the fifo entry and continuing.

CVE-2026-68086 Desconhecida 10/08/2026

mm/khugepaged: write all dirty file folios when collapsing

In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: write all dirty file folios when collapsing [There is no upstream commit, as this code was removed by upstream commit 044925f9b565 ("mm: fs: remove filemap_nr_thps*() functions and their users")] As-is, khugepaged and writable-file opening exclude each other. A file cannot be open writeable and have THPs (because the filesystem is not aware of them). khugepaged will never collapse file pages for files that are opened writeable. On an open(O_RDWR/O_WRONLY), the page cache for that particular file is dropped. This is fine because nothing could've been dirtied. However, there is an edge-case: collapse_file() might not be able to coexist with concurrent writers, but it can coexist with dirty folios (from previous writers). Therefore, the following can happen: open(file, O_RDWR) write(file) close(file) madvise(file_mapping, MADV_COLLAPSE, some non-dirty range) open(file, O_RDWR) nr_thps > 0 truncate_inode_pages() /* THPs are cleared out, but so are the dirty folios */ When this edge-case happens, there is data loss, as the dirty folios are fully discarded. Fix it by fully writing back the page cache (and waiting) when collapsing file THPs. Doing so provides the guarantee that no dirty folio will be observed while there are active THPs. To fully ensure this is safe, the invalidate_lock needs to be held while doing the writeout, so that do_dentry_open()'s page cache truncation excludes this write-and-wait. As a side effect, move the nr_thps counter bumping outside the i_pages lock. This is correct since the counter itself is an atomic_t and the producer <-> consumer correctness is provided by a full memory barrier: smp_mb() in collapse_file()/memory barrier implied by full ordering in get_write_access() -> atomic_inc_unless_negative().

CVE-2026-68085 Alta · 8.0 CWE-667 10/08/2026

Bluetooth: hci_uart: clear HCI_UART_SENDING when write_work is canceled

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: clear HCI_UART_SENDING when write_work is canceled HCI_UART_SENDING bit in tx_state means write_work is pending and blocks queueing it again. Currently this bit is not cleared when canceling the work in hci_uart_close(), which blocks future writes when device is reopened later if write_work was pending. Fix by clearing HCI_UART_SENDING when canceling the work. Also make clearing of tx_skb safe by using disable_work_sync + enable_work instead of just cancel_work_sync. hci_uart_flush() purges the proto tx queue so we can cancel the pending write_work there, instead of doing it just in hci_uart_close(). Re-enable and possibly requeue the work after queue flush.

CVE-2026-68084 Desconhecida 10/08/2026

staging: vme_user: fix location monitor leak in tsi148 bridge

In the Linux kernel, the following vulnerability has been resolved: staging: vme_user: fix location monitor leak in tsi148 bridge tsi148_probe() allocates a location monitor resource and links it into tsi148_bridge->lm_resources. The probe error path frees this list, but tsi148_remove() only frees the dma, slave and master resource lists, so the location monitor resource is leaked on device unbind or module unload. Free the lm_resources list in tsi148_remove() as well, before tsi148_bridge is freed.

CVE-2026-68083 Crítica · 9.1 10/08/2026

ksmbd: fix path resolution in ksmbd_vfs_kern_path_create

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix path resolution in ksmbd_vfs_kern_path_create The SMB2 open lookup is rooted at the share with LOOKUP_BENEATH, but the create/mkdir/hardlink sink is not: ksmbd_vfs_kern_path_create() builds an absolute path with convert_to_unix_name() and resolves it from AT_FDCWD via start_creating_path(), so a ".." component is walked from the real filesystem root and escapes the export. An authenticated client races a missing path component so the rooted open lookup returns -ENOENT (taking the create branch) while the same component is present (a directory) when the create walk runs; the create then resolves ".." out of the share. Root the create walk at the share like the lookup and rename paths already are: resolve the parent with vfs_path_parent_lookup(..., LOOKUP_BENEATH, &share_conf->vfs_path) and create the final component with start_creating_noperm(). convert_to_unix_name() then has no callers and is removed.

CVE-2026-68082 Crítica · 9.8 CWE-125 08/08/2026

libceph: fix two unsafe bare decodes in decode_lockers()

In the Linux kernel, the following vulnerability has been resolved: libceph: fix two unsafe bare decodes in decode_lockers() decode_lockers() in cls_lock_client.c contains two bare decode operations that allow a malicious or compromised OSD to trigger slab-out-of-bounds reads: 1. ceph_decode_32(p) at the num_lockers field has no preceding bounds check. ceph_start_decoding() accepts struct_len=0 as valid -- the internal ceph_decode_need(p, end, 0, bad) always passes -- so when an OSD sends struct_len=0, ceph_start_decoding() returns success with p == end. The immediately following bare ceph_decode_32(p) then reads 4 bytes past the validated buffer boundary. The garbage value is passed directly to kzalloc_objs() as the locker count. The sibling function decode_watchers() in osd_client.c already uses ceph_decode_32_safe() after its own ceph_start_decoding() call. decode_lockers() was the only site using the bare variant. 2. ceph_decode_8(p) after the decode_locker() loop has no preceding bounds check. If an OSD crafts num_lockers such that the loop advances p exactly to end, the subsequent bare ceph_decode_8(p) reads one byte past the validated buffer boundary. The result is passed directly into *type, which is used as a lock type discriminator by callers, giving an OSD-controlled one-byte OOB read with direct influence over the lock type field. Fix both by replacing bare operations with their safe variants: ceph_decode_32(p) -> ceph_decode_32_safe(p, end, *num_lockers, err_inval) ceph_decode_8(p) -> ceph_decode_8_safe(p, end, *type, err_free_lockers) The goto targets differ intentionally: err_inval: is a new label returning -EINVAL directly. It is used for the pre-allocation failure path where *lockers is not yet allocated and must not be passed to ceph_free_lockers(). err_free_lockers: is the existing label. It is used for the post-allocation failure path where *lockers is allocated and must be freed. ret is set to -EINVAL before ceph_decode_8_safe() so that err_free_lockers returns the correct error code on bounds violation. Without this, err_free_lockers would return a stale ret value (0 from the successful decode_locker() loop), silently swallowing the error. -EINVAL is correct for both failure paths. The data received from the OSD is structurally malformed. -ENOMEM would misrepresent the failure class to callers and to stable@ backporters triaging error paths. Attacker model: a malicious or compromised OSD in a multi-tenant Ceph deployment can trigger this against any kernel client that issues the lock.get_info class method (e.g. during RBD exclusive lock acquisition). [ idryomov: trim changelog, formatting ]

CVE-2026-68081 Desconhecida 08/08/2026

KVM: nVMX: Put vmcs12 pages if nested VM-Enter fails due to invalid guest state

In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Put vmcs12 pages if nested VM-Enter fails due to invalid guest state Put all vmcs12 pages if KVM synthesizes a nested VM-Exit due to invalid guest while emulating VMLAUNCH or VMRESUME. The invalid guest state path doesn't use nested_vmx_vmexit() as that API is intended to be used if and only if L2 is active, and the open coded equivalent neglects to put the vmcs12 pages. Failure to put the vmcs12 pages leaks any pinned pages (and/or mappings) if L1 retries VMLAUNCH/VMRESUME. Note, the !from_vmenter scenario doesn't suffer the same problem, as vmx_get_nested_state_pages() only gets/pins/maps the vmcs12 pages if L2 is active, i.e. if a "full" VM-Exit is guaranteed before KVM will retry getting vmcs12 pages.

CVE-2026-68480 Desconhecida 06/08/2026

x86/bugs: Make Safe-RET robust against interrupt injection

In the Linux kernel, the following vulnerability has been resolved: x86/bugs: Make Safe-RET robust against interrupt injection An attacker injecting interrupts while the Safe-RET mitigation executes on machines affected by SRSO can neutralize the safe return sequence, potentially leading to data leakage through speculative execution. Fixup register state as if the Safe-RET sequence executed successfully by "emulating" it, in a manner of speaking, and avoid executing a RET instruction after returning from the interrupt.

CVE-2026-64604 Desconhecida 06/08/2026

KVM: VMX: Grab vmcs12 on CR8 interception update iff vCPU is in guest mode

In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Grab vmcs12 on CR8 interception update iff vCPU is in guest mode When updating CR8 intercepts, get vmcs12 if and only if the vCPU is in guest mode so that a future change can have update CR8 intercepts during vCPU creation, without running afoul of get_vmcs12()'s lockdep assertion. ------------[ cut here ]------------ debug_locks && !(lock_is_held(&(&vcpu->mutex)->dep_map) || !refcount_read(&vcpu->kvm->users_count)) WARNING: arch/x86/kvm/vmx/nested.h:61 at get_vmcs12 arch/x86/kvm/vmx/nested.h:60 [inline], CPU#0: syz.2.19/5879 WARNING: arch/x86/kvm/vmx/nested.h:61 at vmx_update_cr8_intercept+0x3de/0x4e0 arch/x86/kvm/vmx/vmx.c:6879, CPU#0: syz.2.19/5879 Modules linked in: CPU: 0 UID: 0 PID: 5879 Comm: syz.2.19 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:get_vmcs12 arch/x86/kvm/vmx/nested.h:60 [inline] RIP: 0010:vmx_update_cr8_intercept+0x3de/0x4e0 arch/x86/kvm/vmx/vmx.c:6879 Call Trace: <TASK> apic_update_ppr arch/x86/kvm/lapic.c:984 [inline] kvm_lapic_reset+0x1c24/0x2980 arch/x86/kvm/lapic.c:3023 kvm_vcpu_reset+0x44c/0x1bf0 arch/x86/kvm/x86.c:12986 kvm_arch_vcpu_create+0x746/0x8b0 arch/x86/kvm/x86.c:12847 kvm_vm_ioctl_create_vcpu+0x428/0x930 virt/kvm/kvm_main.c:4201 kvm_vm_ioctl+0x893/0xd50 virt/kvm/kvm_main.c:5159 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> No functional change intended.

CVE-2026-64603 Desconhecida 06/08/2026

platform/x86: intel-hid: Protect ACPI notify handler against recursion

In the Linux kernel, the following vulnerability has been resolved: platform/x86: intel-hid: Protect ACPI notify handler against recursion Since commit e2ffcda16290 ("ACPI: OSL: Allow Notify () handlers to run on all CPUs") ACPI notify handlers like the intel-hid notify_handler() may run on multiple CPU cores racing with themselves. On convertibles and detachables (matched by DMI chassis-type 31 and 32 in dmi_auto_add_switch[]) the SW_TABLET_MODE input device is registered lazily from notify_handler() on the first tablet-mode event, via intel_hid_switches_setup(). When two such events race on different CPUs both can pass the !priv->switches check and register the priv->switches input device twice, resulting in a duplicate sysfs entry and a subsequent NULL pointer dereference. This is the same class of bug fixed by commit e075c3b13a0a ("platform/x86: intel-vbtn: Protect ACPI notify handler against recursion") for the sibling intel-vbtn driver. Protect intel-hid notify_handler() from racing with itself with a mutex to fix this.

CVE-2026-64602 Desconhecida 06/08/2026

iio: adc: spear: Initialize completion before requesting IRQ

In the Linux kernel, the following vulnerability has been resolved: iio: adc: spear: Initialize completion before requesting IRQ In the report from Jaeyoung Chung: "spear_adc_probe() in drivers/iio/adc/spear_adc.c registers its interrupt handler with devm_request_irq() before it initializes st->completion with init_completion(). If an interrupt arrives after devm_request_irq() and before init_completion(), the handler calls complete() on an uninitialized completion, causing a kernel panic. The probe path, in spear_adc_probe(): iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */ ... retval = devm_request_irq(&pdev->dev, irq, spear_adc_isr, 0, LPC32XXAD_NAME, st); /* register handler */ ... init_completion(&st->completion); /* initialize completion */ spear_adc_isr() calls complete(): complete(&st->completion); If the device raises an interrupt before init_completion() runs, complete() acquires the uninitialized wait.lock and walks the zeroed task_list in swake_up_locked(). The zeroed task_list makes list_empty() return false, so swake_up_locked() dereferences a NULL list entry, triggering a KASAN wild-memory-access." Fix the chance of a spurious IRQ causing an uninitialized pointer dereference by moving init_completion() above devm_request_irq().

CVE-2026-64601 Alta · 7.8 06/08/2026

ALSA: us144mkii: capture_urb_complete: redundant usb_anchor_urb corrupts anchor list on each resubmission

In the Linux kernel, the following vulnerability has been resolved: ALSA: us144mkii: capture_urb_complete: redundant usb_anchor_urb corrupts anchor list on each resubmission In capture_urb_complete(), usb_anchor_urb() is called on every completion callback, but the URB is already anchored from the initial submission in tascam_trigger_start(). Each redundant call corrupts the anchor's doubly-linked list and inflates the URB refcount. When usb_kill_anchored_urbs() traverses the list during stream stop / suspend / disconnect, the corrupted list leads to use-after-free. Remove the redundant usb_anchor_urb() from the resubmit path.

CVE-2026-64599 Alta · 7.8 CWE-415 06/08/2026

crypto: amlogic - avoid double cleanup in meson_crypto_probe()

In the Linux kernel, the following vulnerability has been resolved: crypto: amlogic - avoid double cleanup in meson_crypto_probe() When meson_allocate_chanlist() fails after a partial allocation, it already unwinds the allocated chanlist state through its local error path. meson_crypto_probe() then jump to error_flow and calls meson_free_chanlist() again, causing the same per-flow resources to be torn down twice. In the reproduced failure path, the second teardown re-entered crypto_engine_exit() on an already destroyed worker and KASAN reported a slab-use-after-free in kthread_destroy_worker(). Prevent double-free by handling partial allocation failures locally within meson_allocate_chanlist() and skipping the outer cleanup path. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. The bug was reproduced in a QEMU x86_64 guest booted with KASAN on v7.1, using the reproducer under tools/testing/meson_crypto_probe. The reproducer forces the second dma_alloc_attrs() call in the gxl-crypto probe path to return NULL, making meson_allocate_chanlist() fail after partial initialization. On the unpatched kernel this reliably triggered a slab-use-after-free. With this fix applied, the same reproducer no longer emits any KASAN report and the probe fails cleanly with -ENOMEM. ================================================================== BUG: KASAN: slab-use-after-free in kthread_destroy_worker+0xb2/0xd0 Read of size 8 at addr ff1100010c057a68 by task insmod/265 CPU: 1 UID: 0 PID: 265 Comm: insmod Tainted: G O 7.1.0-rc2-00376-g810af9adc907-dirty #10 PREEMPT(lazy) Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 print_report+0xcb/0x5e0 ? __virt_addr_valid+0x21d/0x3f0 ? kthread_destroy_worker+0xb2/0xd0 ? kthread_destroy_worker+0xb2/0xd0 kasan_report+0xca/0x100 ? kthread_destroy_worker+0xb2/0xd0 kthread_destroy_worker+0xb2/0xd0 meson_crypto_probe+0x4d0/0xc10 [amlogic_gxl_crypto] platform_probe+0x99/0x140 really_probe+0x1c6/0x6a0 ? __pfx___device_attach_driver+0x10/0x10 __driver_probe_device+0x248/0x310 ? acpi_driver_match_device+0xb0/0x100 driver_probe_device+0x48/0x210 ? __pfx___device_attach_driver+0x10/0x10 __device_attach_driver+0x160/0x320 bus_for_each_drv+0x104/0x190 ? __pfx_bus_for_each_drv+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x2c/0x50 __device_attach+0x19d/0x3b0 ? __pfx___device_attach+0x10/0x10 ? do_raw_spin_unlock+0x53/0x220 device_initial_probe+0x78/0xa0 bus_probe_device+0x5b/0x130 device_add+0xcfd/0x1430 ? __pfx_device_add+0x10/0x10 ? insert_resource+0x34/0x50 ? lock_release+0xc9/0x290 platform_device_add+0x24e/0x590 ? __pfx_meson_crypto_probe_repro_init+0x10/0x10 [meson_crypto_probe_repro] meson_crypto_probe_repro_init+0x330/0xff0 [meson_crypto_probe_repro] do_one_initcall+0xc0/0x450 ? __pfx_do_one_initcall+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x2c/0x50 ? __create_object+0x59/0x80 ? kasan_unpoison+0x27/0x60 do_init_module+0x27b/0x7d0 ? __pfx_do_init_module+0x10/0x10 ? kasan_quarantine_put+0x84/0x1d0 ? kfree+0x32c/0x510 ? load_module+0x561e/0x5ff0 load_module+0x54fe/0x5ff0 ? __pfx_load_module+0x10/0x10 ? security_file_permission+0x20/0x40 ? kernel_read_file+0x23d/0x6e0 ? mmap_region+0x235/0x4a0 ? __pfx_kernel_read_file+0x10/0x10 ? __file_has_perm+0x2c0/0x3e0 init_module_from_file+0x158/0x180 ? __pfx_init_module_from_file+0x10/0x10 ? __lock_acquire+0x45a/0x1ba0 ? idempotent_init_module+0x315/0x610 ? lock_release+0xc9/0x290 ? lock ---truncated---

CVE-2026-64598 Alta · 8.8 CWE-190 06/08/2026

smb/client: Fix error code in smb2_aead_req_alloc()

In the Linux kernel, the following vulnerability has been resolved: smb/client: Fix error code in smb2_aead_req_alloc() The "*num_sgs" variable is a u32 so "ERR_PTR(*num_sgs)" doesn't work. We would have to do something similar to the previous line where it's cast to int and then long. However, it's simpler to store the return in an int ret variable. This bug would eventually result in a crash when dereference the invalid error pointer.

CVE-2026-64597 Crítica · 9.8 CWE-415 06/08/2026

smb: client: fix double-free in SMB2_close() replay

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double-free in SMB2_close() replay A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_close_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free.

CVE-2026-64596 Desconhecida 06/08/2026

libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo()

In the Linux kernel, the following vulnerability has been resolved: libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo() Since commit 1e7ab6f67824 ("anon_inode: rework assertions"), path_noexec() warns when an anonymous-inode file is mmap'd from a superblock that has not set SB_I_NOEXEC. dma-buf backs its files this way and never set the flag, so mmap of any exported buffer trips the warning on a CONFIG_DEBUG_VFS=y kernel: WARNING: CPU: 11 PID: 121813 at fs/exec.c:118 path_noexec+0x47/0x50 do_mmap+0x2b5/0x680 vm_mmap_pgoff+0x129/0x210 ksys_mmap_pgoff+0x177/0x240 __x64_sys_mmap+0x33/0x70 init_pseudo() sets up internal SB_NOUSER mounts that are never path-reachable. Set both flags here so every pseudo filesystem gets them by default instead of each caller setting them. SB_I_NODEV is inert for unreachable mounts. SB_I_NOEXEC has one visible effect: an executable mapping of a pseudo-fs fd, such as a dma-buf, now fails with -EPERM, which is the invariant the assertion enforces. No in-tree caller maps these executable. Reproduce on CONFIG_DEBUG_VFS=y: make -C tools/testing/selftests/dmabuf-heaps sudo ./tools/testing/selftests/dmabuf-heaps/dmabuf-heap -t system

CVE-2026-64595 Desconhecida 06/08/2026

HID: hid-lenovo-go: cancel cfg_setup work in hid_go_cfg_remove()

In the Linux kernel, the following vulnerability has been resolved: HID: hid-lenovo-go: cancel cfg_setup work in hid_go_cfg_remove() hid_go_cfg_probe() initialises drvdata.go_cfg_setup and schedules it to run 2 ms later: INIT_DELAYED_WORK(&drvdata.go_cfg_setup, &cfg_setup); schedule_delayed_work(&drvdata.go_cfg_setup, msecs_to_jiffies(2)); cfg_setup() dereferences drvdata.hdev to issue MCU command requests. hid_go_cfg_remove() tears down sysfs and stops the HID device, but never drains the delayed work. If the device is unbound within the 2 ms scheduling delay (a probe failure rolling back via remove, or a fast rmmod after probe), the work fires after hid_destroy_device() has dropped its reference and released the underlying hdev struct, leaving cfg_setup() with a stale drvdata.hdev pointer. Mirror the sibling driver hid-lenovo-go-s.c, whose hid_gos_cfg_remove() already calls cancel_delayed_work_sync() on its analogous work, and drain go_cfg_setup at the top of hid_go_cfg_remove(). The cancel must come before guard(mutex)(&drvdata.cfg_mutex) because cfg_setup() acquires that mutex; reversing the order would deadlock.

CVE-2026-64594 Desconhecida 06/08/2026

usb: gadget: f_fs: initialize reset_work at allocation time

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: initialize reset_work at allocation time ffs_fs_kill_sb() unconditionally calls cancel_work_sync() on ffs->reset_work when a functionfs instance is unmounted: ffs_data_reset(ffs); cancel_work_sync(&ffs->reset_work); However ffs->reset_work is only ever initialized via INIT_WORK() in ffs_func_set_alt() and ffs_func_disable(), and only on the FFS_DEACTIVATED path. That state is reached solely by ffs_data_closed() when the instance is mounted with the "no_disconnect" option, so for the common case (no "no_disconnect", or mounted and unmounted without ever being deactivated) reset_work is never initialized. ffs_data_new() allocates the ffs_data with kzalloc_obj() and does not initialize reset_work, and ffs_data_reset()/ffs_data_clear() do not touch it either, so reset_work.func is left NULL. cancel_work_sync() on such a work then trips the WARN_ON(!work->func) guard in __flush_work(): WARNING: kernel/workqueue.c:4301 at __flush_work+0x330/0x360, CPU#3: umount Call trace: __flush_work cancel_work_sync ffs_fs_kill_sb [usb_f_fs] deactivate_locked_super deactivate_super cleanup_mnt __cleanup_mnt task_work_run exit_to_user_mode_loop el0_svc On older kernels cancel_work_sync() on a zero-initialized work struct was a silent no-op, which hid the missing initialization. Initialize reset_work once in ffs_data_new() so it is always valid for the lifetime of the ffs_data, and drop the now-redundant INIT_WORK() calls from the two deactivation paths.

CVE-2026-64593 Desconhecida 06/08/2026

btrfs: do not trim a device which is not writeable

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not trim a device which is not writeable [BUG] There is a bug report that btrfs/242 can randomly fail with the following NULL pointer dereference: run fstests btrfs/242 at 2026-06-01 10:25:08 BTRFS: device fsid d4d7f234-487c-4787-88e4-47a8b68c9874 devid 1 transid 9 /dev/sdc (8:32) scanned by mount (122609) BTRFS info (device sdc): first mount of filesystem d4d7f234-487c-4787-88e4-47a8b68c9874 BTRFS info (device sdc): using crc32c checksum algorithm BTRFS warning (device sdc): devid 2 uuid fbe72d72-3272-482d-80fb-ab88ed398192 is missing BTRFS warning (device sdc): devid 2 uuid fbe72d72-3272-482d-80fb-ab88ed398192 is missing BTRFS info (device sdc): allowing degraded mounts BTRFS info (device sdc): turning on async discard BTRFS info (device sdc): enabling free space tree Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 user pgtable: 4k pages, 48-bit VAs, pgdp=000000013fd6b000 CPU: 4 UID: 0 PID: 122625 Comm: fstrim Not tainted 7.0.10-2-default #1 PREEMPT(full) openSUSE Tumbleweed e9a5f6b24978fba3bf015a992f865837fdfff3dd Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20250812-19.fc42 08/12/2025 pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : btrfs_trim_fs+0x34c/0xa00 [btrfs] lr : btrfs_trim_fs+0x1f0/0xa00 [btrfs] Call trace: btrfs_trim_fs+0x34c/0xa00 [btrfs f02c1d570ceea621c69d302ba75dd61868083840] (P) btrfs_ioctl_fitrim+0xe8/0x178 [btrfs f02c1d570ceea621c69d302ba75dd61868083840] btrfs_ioctl+0xdd4/0x2bd8 [btrfs f02c1d570ceea621c69d302ba75dd61868083840] __arm64_sys_ioctl+0xac/0x108 invoke_syscall.constprop.0+0x5c/0xd0 el0_svc_common.constprop.0+0x40/0xf0 do_el0_svc+0x24/0x40 el0_svc+0x40/0x1d0 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1b0/0x1b8 Code: 17ffff83 f94017e0 f9002be0 f9402ea0 (f9400c00) ---[ end trace 0000000000000000 ]--- Also the reporter is very kind to test the following ASSERT() added to btrfs_trim_free_extents_throttle(): ASSERT(device->bdev, "devid=%llu path=%s dev_state=0x%lx\n", device->devid, btrfs_dev_name(device), device->dev_state); And it shows the following output: assertion failed: device->bdev, in extent-tree.c:6630 (devid=2 path=/dev/sdd dev_state=0x82) Which means the device->bdev is NULL, and the dev_state is BTRFS_DEV_STATE_IN_FS_METADATA | BTRFS_DEV_STATE_ITEM_FOUND, without BTRFS_DEV_STATE_WRITEABLE flag set. [CAUSE] The pc points to the following call chain: btrfs_trim_fs() |- btrfs_trim_free_extents() |- btrfs_trim_free_extents_throttle() |- bdev_max_discard_sectors(device->bdev) So the NULL pointer dereference is caused by device->bdev being NULL. This looks impossible by a quick glance, as just before calling btrfs_trim_free_extents_throttle(), we have skipped any device that has BTRFS_DEV_STATE_MISSING flag set. However in this particular case, there is a window where the missing device is later re-scanned, causing btrfs to remove the BTRFS_DEV_STATE_MISSING flag: btrfs_control_ioctl() |- btrfs_scan_one_device() |- device_list_add() |- rcu_assign_pointer(device->name, name); | This updates the missing device's path to the new good path. | |- clear_bit(BTRFS_DEV_STATE_MISSING, &device->dev_state) This removes the BTRFS_DEV_STATE_MISSING flag. This allows the missing device to re-appear and clear the BTRFS_DEV_STATE_MISSING flag. However the device still does not have the BTRFS_DEV_STATE_WRITEABLE flag set, nor is its bdev pointer updated. The bdev pointer remains NULL, triggering the crash later. [FIX] This is a big de-synchronization between BTRFS_DEV_STATE_MISSING and device->bdev pointer, and shows a gap in btrfs's re-appearing-device handling. The proper handling of re-appearing device will need quite some extra work, which is out of the context of this small ---truncated---

CVE-2026-64592 Desconhecida 06/08/2026

riscv: mm: Unconditionally sfence.vma for spurious fault

In the Linux kernel, the following vulnerability has been resolved: riscv: mm: Unconditionally sfence.vma for spurious fault Svvptc does not guarantee that it's safe to just return here. Since we have already cleared our bit, if, theoretically, the bounded timeframe for the accessed page to become valid still hasn't happened after sret, we could fault again and actually crash. Hopefully, these spurious faults should be rare enough that this is an acceptable slowdown.

CVE-2026-64591 Desconhecida 06/08/2026

iommu/vt-d: Avoid WARNING in sva unbind path

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Avoid WARNING in sva unbind path The Intel IOMMU driver allows SVA on devices even if they do not support PCI/PRI. Commit 39c20c4e83b9 ("iommu/vt-d: Only handle IOPF for SVA when PRI is supported") modified the SVA bind path to allow this configuration by skipping IOPF enablement when PRI is missing. However, it failed to update the unbind path. This creates an imbalance: the unbind path attempts to disable IOPF for a device that never had it enabled, triggering a WARNING in intel_iommu_disable_iopf(): WARNING: drivers/iommu/intel/iommu.c:3475 at intel_iommu_disable_iopf+0x4f/0x90d Call Trace: <TASK> blocking_domain_set_dev_pasid+0x50/0x70 iommu_detach_device_pasid+0x89/0xc0 iommu_sva_unbind_device+0x73/0x150 xe_vm_close_and_put+0x4d2/0x1200 [xe] Fix this by bypassing IOPF operations for SVA domains on non-PRI hardware in both the bind and unbind paths.