Vulnerabilidades do Linux Linux

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Clamp MSI-X derived queue counts to avoid truncation ha->msix_count is u16, but ha->max_req_queues, ha->max_rsp_queues and ha->max_qpairs are u8. Deriving the queue count as "ha->max_req_queues = ha->msix_count - 1" therefore truncates: a board (or a misconfigured/malicious hot-plugged device) advertising 257 MSI-X vectors yields msix_count - 1 == 256, which truncates to 0. An MSI-X count of 1 zeroes it as well, and in target mode the subsequent "ha->max_req_queues--" then underflows 0 to 255. When the count is 0, qla2x00_alloc_queues() calls kzalloc_objs(struct req_que *, 0), which returns ZERO_SIZE_PTR. That is not NULL, so the allocation check passes and the following "ha->req_q_map[0] = req" dereferences ZERO_SIZE_PTR, corrupting memory or crashing the kernel. Add qla_calc_queue_count() to clamp the derived value into [1, QLA_MAX_QUEUES - 1] so it always fits in u8 and is never zero, and use it at all three derivation sites (qla25xx_iospace_config(), qla83xx_iospace_config() and qla24xx_enable_msix()). Also guard the target-mode decrement so it cannot reintroduce a zero (which would in turn underflow max_qpairs).

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix cs84xx use-after-free on host teardown qla84xx_put_chip() drops the last reference to ha->cs84xx and frees it via __qla84xx_chip_release() without clearing ha->cs84xx. During teardown it ran before scsi_remove_host(), which is what removes the 84xx_fw_version host sysfs attribute. A concurrent read of that attribute in the window between the two calls executes qla24xx_84xx_fw_version_show(), which dereferences the freed ha->cs84xx, resulting in a use-after-free. Move qla84xx_put_chip() to after scsi_remove_host() in both qla2x00_remove_one() and qla2x00_disable_board_on_pci_error(). Once scsi_remove_host() returns, the sysfs attribute is gone and kernfs has drained any in-flight show(), so no reader can touch cs84xx; the put still runs before the host and ha are freed.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Reject non-SCSI SRB on status IOCB fast path qla2x00_status_entry() filters out non-TYPE_SRB entries and the SRB_NVME_CMD, SRB_BIDI_CMD and SRB_TM_CMD types, then falls through to a SCSI fast path that assumes the command is an SRB_SCSI_CMD. The first thing on that path, qla_chk_edif_rx_sa_delete_pending(), and the subsequent handling both evaluate GET_CMD_SP(sp), i.e. sp->u.scmd.cmd. The srb u union overlays the SCSI command pointer with other command layouts (bsg_job, iocb_cmd). If firmware delivers an unexpected STATUS_TYPE IOCB for a non-SCSI handle, sp->u.scmd.cmd can read as a non-NULL garbage pointer, bypassing the NULL checks in qla_chk_edif_rx_sa_delete_pending() and at the cp == NULL test, and leading to a wild pointer dereference. Reject any SRB whose type is not SRB_SCSI_CMD before entering the fast path. The outstanding_cmds slot is left untouched so a genuinely non-SCSI command still completes through its proper handler.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Quiesce response IRQ before freeing request queue qla2xxx_delete_qpair() deletes the request queue before the response queue. qla25xx_delete_req_que() frees the request queue memory (kfree(req) in qla25xx_free_req_que()), but the response-queue MSI-X is only released later, in qla25xx_free_rsp_que(). In that window the response interrupt can still fire, qla2xxx_msix_rsp_q() queues qpair->q_work, and qla_do_work() -> qla24xx_process_response_queue() dereferences the now-freed rsp->req (LOGINOUT/CT/ELS entries and the status path), a use-after-free. The cancel_work_sync() added for the qpair teardown lives in the response free path, which runs after the request queue is already freed, so it does not protect rsp->req. Release the response-queue interrupt and flush qpair->q_work before deleting the request queue, so no late completion can reach the freed request queue. Clearing have_irq makes the subsequent qla25xx_free_rsp_que() skip its free_irq(), and the firmware queue-delete order (request then response) is preserved; the request-delete mailbox completes on the default vector and is unaffected by dropping the qpair response interrupt early.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Hold vport_slock for host map update in report ID acquisition qla24xx_report_id_acquisition() format-1 handling drops vport_slock after taking the vport reference and then calls qla_update_host_map() without the lock. That reaches qla_update_vp_map(), which mutates the ha->host_map btree via btree_insert32()/btree_update32()/btree_remove32() and is documented to require vport_slock to be held by the caller. Running it unlocked can race concurrent host_map updates and corrupt the btree. The format-2 path in the same function already wraps its host_map update (SET_AL_PA) in vport_slock; the format-1 path is the lone outlier. Hold vport_slock across the format-1 qla_update_host_map() call to honor the documented locking contract. The vref_count taken in the loop keeps the vport valid, so this only adds the missing host_map serialization.

In the Linux kernel, the following vulnerability has been resolved: f2fs: only redirty pinned folios in redirty_blocks redirty_blocks() pins folios with read_cache_folio() and then walks the same range again with filemap_lock_folio() to redirty them and drop the references it took. Commit 5951fee46bef ("f2fs: Use a folio in redirty_blocks()") changed the second pass to a do/while loop. If read_cache_folio() fails before anything is pinned, page_idx does not advance but the cleanup loop still runs once. If readahead has already populated the failed folio in page cache, that extra iteration finds it and folio_put_refs(folio, 2) drops one reference too many. Later drop_caches or reclaim can then report "BUG: Bad page state". Only redirty the range that was pinned successfully.

In the Linux kernel, the following vulnerability has been resolved: f2fs: validate MOVE_RANGE destination size F2FS_IOC_MOVE_RANGE checks the source range, but not the destination end before updating i_size. A source hole can expose this: __clone_blkaddrs() skips NULL_ADDR entries and returns success, so the caller can still extend the destination inode with unchecked pos_out + len. Reject destination overflow and use inode_newsize_ok() before extending the destination inode.

In the Linux kernel, the following vulnerability has been resolved: f2fs: limit recovery filename logging to stored length F2FS stores recovery filenames as a length plus a fixed-size i_name buffer. The buffer is not NUL-terminated, but recover_inode() and recover_dentry() print it with %s. For a 255-byte filename, recovery logging can read past i_name into the following raw inode fields. Print the name with a precision bounded by i_namelen and F2FS_NAME_LEN.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix folio_nr_pages() race after put in large folio invalidate Our v6.18 based Android system is continuely suffering livelock and bad page stat as shown in[1] which related to broken xarray slot status. By investigating big folio operations within f2fs, we find below races and fix it by get the nr_pages before drop the refcount and folio_lock. f2fs_get_read_data_folio() calls f2fs_folio_put() before folio_nr_pages() when invalidating a large folio from the page cache. That unlocks the folio and drops the caller reference, leaving a window where a concurrent truncate or folio split can shrink the compound folio or free it before the invalidate range is computed. An undersized range then leaves split sub-folios in mapping->i_pages, which can later interact badly with truncate and reclaim (stale xarray entries and bad page state when folio->mapping no longer matches the mapping being truncated). [1] PID: 2594 TASK: ffffff8169b81580 CPU: 7 COMMAND: "Thread-3" #0 [ffffffc08ef2b8a0] xas_load at ffffffe52d1f42a4 #1 [ffffffc08ef2b900] find_get_entries at ffffffe52c185798 #2 [ffffffc08ef2bb60] truncate_inode_pages_range at ffffffe52c19e83c #3 [ffffffc08ef2bbc0] truncate_inode_pages_final at ffffffe52c19ec2c #4 [ffffffc08ef2bc20] f2fs_evict_inode at ffffffe52c4c8400 #5 [ffffffc08ef2bcc0] evict at ffffffe52c2de9f4 #6 [ffffffc08ef2bd00] iput at ffffffe52c2db1b4 #7 [ffffffc08ef2bd30] dentry_unlink_inode at ffffffe52c2d7204 #8 [ffffffc08ef2bd50] __dentry_kill at ffffffe52c2d3dcc #9 [ffffffc08ef2bd80] dput at ffffffe52c2d3c3c #10 [ffffffc08ef2bda0] __fput at ffffffe52c2b0a7c #11 [ffffffc08ef2bde0] ____fput at ffffffe52c2b1034 #12 [ffffffc08ef2bdf0] task_work_run at ffffffe52beea200 #13 [ffffffc08ef2be20] exit_to_user_mode_loop at ffffffe52bfbc17c #14 [ffffffc08ef2be80] el0_svc at ffffffe52d1f8e54 #15 [ffffffc08ef2beb0] el0t_64_sync_handler at ffffffe52d1f8d10