CVE Intelligence
Medium Denial of service

CVE-2026-43486 — arm64: contpte: fix set_access_flags() no-op check for SMMU/ATS faults

In the Linux kernel, the following vulnerability has been resolved: arm64: contpte: fix set_access_flags() no-op check for SMMU/ATS faults contpte_ptep_set_access_flags() compared the gathered ptep_get() value against the requested entry to detect no-ops. ptep_get() ORs AF/dirty from all sub-PTEs in the CONT block, so a dirty sibling can make the target appear already-dirty. When the gathered value matches entry, the function returns 0 even though the target sub-PTE still has PTE_RDONLY set in hardware. For a CPU with FEAT_HAFDBS this gathered view is fine, since hardware may set AF/dirty on any sub-PTE and CPU TLB behavior is effectively gathered across the CONT range. But page-table walkers that evaluate each descriptor individually (e.g. a CPU without DBM support, or an SMMU without HTTU, or with HA/HD disabled in CD.TCR) can keep faulting on the unchanged target sub-PTE, causing an infinite fault loop. Gathering can therefore cause false no-ops when only a sibling has been updated: - write faults: target still has PTE_RDONLY (needs PTE_RDONLY cleared) - read faults: target still lacks PTE_AF Fix by checking each sub-PTE against the requested AF/dirty/write state (the same bits consumed by __ptep_set_access_flags()), using raw per-PTE values rather than the gathered ptep_get() view, before returning no-op. Keep using the raw target PTE for the write-bit unfold decision. Per Arm ARM (DDI 0487) D8.7.1 ("The Contiguous bit"), any sub-PTE in a CONT range may become the effective cached translation and software must maintain consistent attributes across the range.

Published May 13, 2026 · Updated Oct 13, 2026 · Sources: NIST National Vulnerability Database, CVE Program (cve.org) e CISA ADP · CNA: Linux

Who exploits it and how urgent it is

A 0–100 score combining confirmed exploitation, ransomware and APT use, public exploits, EPSS and severity.

No exploitation signal in the sources consulted so far.
How the score was calculated
  • EPSS 0.2% (30-day exploitation probability)+1
  • Technical severity (medium)+3

The score orders the patch queue; it does not replace your asset context (internet exposure, criticality, compensating controls).

Triage

Is it exploited, how likely is exploitation, what does it touch, and how severe do the sources call it.

Exploitation
Not confirmed
Not in CISA KEV — an absence of record, not proof it is unexploited.
EPSS FIRST
0.16%
ahead of 5% of scored CVEs · Oct 14, 2026
Affects
Linux
Linux and 1 more
CVSS base
5.5
Medium · 1 source(s)

Remediation

Fixes and mitigations documented by the sources — linked to the original advisory.

  • Documented patch — git.kernel.org (NIST National Vulnerability Database)
  • Documented patch — git.kernel.org (NIST National Vulnerability Database)
  • Documented patch — git.kernel.org (NIST National Vulnerability Database)
  • Documented patch — git.kernel.org (NIST National Vulnerability Database)

First 24 hours

Ordered from the record’s own fields — exposure first, because you cannot patch what you have not found. A rule-generated starting point.

  1. Identify exposed assets running the affected vendor/product/version combinations (Linux Linux, Linux Linux Kernel).
  2. Apply the fixed version or the patch documented under Remediation.
  3. Search available logs for exploit probes matching the vulnerability class (denial of service), errors and authentication anomalies.

Affected scope

Vendor, product and versions as the sources word them.

VendorProductVersionsStatusSource
Linux Linux ≥ 4602e5757bcceb231c3a13c36c373ad4a750eddb and < 05d239f2c95e66e27e7fb4e99ee07eb56e3e34b0≥ 4602e5757bcceb231c3a13c36c373ad4a750eddb and < 6f92a7a8b48a523f910ef25dd83808710724f59b≥ 4602e5757bcceb231c3a13c36c373ad4a750eddb and < 09d620555e59768776090073a2c59d2bc8506eb3≥ 4602e5757bcceb231c3a13c36c373ad4a750eddb and < 97c5550b763171dbef61e6239cab372b9f9cd4a2version 6.9 Vulnerable CVE Program (cve.org) e CISA ADP
Linux Linux Kernel ≥ 6.9 and < 6.12.78≥ 6.13 and < 6.18.19≥ 6.19 and < 6.19.9version 7.0-rc1version 7.0-rc2 Vulnerable NIST National Vulnerability Database

Attack characteristics

The CVSS vector, decoded. It describes the attack, not your exposure to it.

Attack vector
Local
Attack complexity
Low
Privileges required
Low
User interaction
None
Scope
Unchanged
Confidentiality
None
Integrity
None
Availability
High

Every base score collected

Sources score independently and may disagree; each row says who scored it and under which version.

ScoreVersionSeverityExpl.ImpactScored by
5.5 CVSS 3.1 Medium 1.8 3.6 nvd@nist.gov via NIST National Vulnerability Database
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H (score shown at the top: nvd@nist.gov)

Weakness MITRE

Weakness class according to MITRE’s CWE catalog.

CWE-835 · Infinite Loop

Other CVEs with this weakness →

EPSS over time FIRST

Oct 13, 2026 → Oct 14, 2026 · 2 reading(s) · max 0.16%

Detection

Read off the CVSS vector and the weakness class. Starting points, not tested rules.

  • Local/physical vector: focus on endpoint telemetry (EDR) from affected hosts.
  • Track CPU/memory spikes and availability drops correlated with request patterns.
endpoint telemetry (EDR)resource metrics

Timeline

What happened to this CVE, newest first.

  • 2026
  • Affected products added · linux/linux
    Oct 13, 2026 · CVE Program (cve.org) e CISA ADP
  • Record published
    Oct 13, 2026
  • Fix documented
    Oct 13, 2026 · NIST National Vulnerability Database
  • CVSS changed · 5.5
    Oct 13, 2026 · NIST National Vulnerability Database
  • Source status changed · → Analyzed
    Oct 13, 2026 · NIST National Vulnerability Database
  • Record created in this database
    Oct 13, 2026 · NIST National Vulnerability Database
  • CVE published
    May 13, 2026 · Linux

Source activity

Repeated readings are counted rather than listed.

  • 1× Official description updated · Oct 13, 2026 – Oct 13, 2026

References

4 on the record

Elsewhere on this site

Linux
every CVE for this vendor
Denial of service
same class
CWE-835
other pages naming this weakness

Related CVEs (same products)

  • CVE-2026-99999 ipv4: validate checksum_start before completing checksum 10h
  • CVE-2026-98432 ipv4: free inet_opt and ireq_opt after an RCU grace period 10h
  • CVE-2026-98431 RDMA/uverbs: Fix mmap_lock/disassociation_lock circular dependency 1d
  • CVE-2026-98430 RDMA/efa: Keep admin queues alive while IRQ is registered 1d
  • CVE-2026-98429 RDMA/efa: Keep EQ resources alive while IRQ is registered 1d
  • CVE-2026-98428 ALSA: usb: 6fire: Avoid embedded URBs 1d

Not in any source we poll

Listed rather than left blank: an empty field and an unmeasured one look identical on screen, and only one is a reason to look elsewhere.

  • No CISA SSVC assessment.
  • No confirmed IOCs, IP addresses, domains, file hashes, or malware artifacts supplied.
  • No organization-specific asset inventory, compensating-control status, or patch deployment evidence supplied.
  • No exploit packet captures, log samples, or incident case IDs supplied.

Answered from this record

Text assembled only from the fields above — no additional claims.

What should defenders know first?

CVE-2026-43486 is "arm64: contpte: fix set_access_flags() no-op check for SMMU/ATS faults", rated Medium. It affects Linux (Linux); versions are in the scope table. It is not in CISA KEV, which does not rule out exploitation. CVSS 5.5 describes technical severity. EPSS 0.16% estimates the probability of exploitation in 30 days; neither replaces your asset context. First verify whether exposed or business-critical assets run the affected versions, apply vendor fixes or mitigations, and preserve logs for review.

Comments

Moderated technical discussion. Read the community guidelines.

No comments yet.

Sign in or create an account to comment and suggest corrections.