CVE Database

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Azure Files component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the azure-files scheme. Its consumer derives from the same RemoteFileConsumer base class and composed the remote path through a plain concatenation helper, so it inherited the same unconstrained resolution. Reaching it requires a listing name that is not a single path segment, which the Azure Files REST service does not normally return; the exposure was corrected on the same basis as the other remote-file consumers rather than from a demonstrated proof of concept against this scheme. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream.

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel SMB component. This issue affects Apache Camel: from 4.2.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the smb scheme. Its consumer walks the share listing on its own rather than through RemoteFileConsumer, skipping only the exact "." and ".." entries, so a name carrying traversal segments in any other form was concatenated unchecked. Reaching it requires a server that emits a listing name which is not a single path segment, which a conforming SMB2 implementation does not do; the exposure was corrected on the same basis as the other remote-file consumers rather than from a demonstrated proof of concept against this scheme. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream.

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Mina SFTP component. This issue affects Apache Camel: from 4.18.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the mina-sftp scheme, an alternative SFTP implementation whose consumer derives from the same RemoteFileConsumer base class and therefore inherited the same unconstrained resolution. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream.

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel FTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the ftp, ftps and sftp schemes, all of which are affected. The reporter demonstrated the issue end to end against an ftp endpoint, driving a Camel route with a malicious server whose LIST response named a file outside the polled directory. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream.

Deserialization of Untrusted Data vulnerability in Apache Camel Spring Redis component. This issue affects Apache Camel: from 2.11.0 before 4.18.5, from 4.19.0 before 4.22.1. RedisConfiguration.getSerializer lazily built a bare JdkSerializationRedisSerializer whenever no serializer option was configured, and that instance was used for every read the component performs. Spring's implementation delegates through DeserializingConverter to DefaultDeserializer, which reads the bytes with a ConfigurableObjectInputStream and installs no java.io.ObjectInputFilter on the stream, so an arbitrary serialized class graph was materialised and its readObject method executed. RedisConsumer.setBody applied that serializer to the raw bytes of every message published to the subscribed channels, before the Exchange was constructed and therefore before any route logic could inspect the message, so an actor able to issue PUBLISH on a subscribed channel reached the deserialization sink directly. The same default serializer backed the RedisTemplate built by RedisConfiguration.createDefaultTemplate, so the producer read commands GET, HGET, HGETALL and HVALS deserialized whatever was stored in the Redis keyspace, and SpringRedisIdempotentRepository shared that template. Configuring a custom redisTemplate did not close the consumer path, because RedisConsumer.setBody reads getSerializer directly rather than the serializer attached to the template, so a deployment that had wired a String serializer into its own template remained exposed on the consumer side unless it also set the serializer option. The component never constructed a java.io.ObjectInputStream itself, which is why earlier passes over the Camel codebase for unfiltered Java deserialization did not reach it. The behaviour dates back to the introduction of the component, first released in 2.11.0, and was unchanged until this fix. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, set the JVM-wide jdk.serialFilter system property, which the affected code path honours because it reads through a java.io.ObjectInputStream, for example -Djdk.serialFilter=!java.net.**;java.**;javax.**;org.apache.camel.**;!* ; or set the serializer endpoint option to a serializer that does not use Java serialization, such as StringRedisSerializer, noting that this must be set as the serializer option and not only on a custom redisTemplate. As defence in depth, require authentication on the Redis instance and restrict which clients may publish to the subscribed channels, and do not expose a Redis instance consumed by Camel to untrusted networks.

Improper Neutralization of Special Elements Used in a Template Engine and Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel HTTP, Netty HTTP, Undertow and Vert.x HTTP components. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel HTTP producer families let an inbound message override the endpoint URI through the CamelHttpUri and CamelRestHttpUri headers, and then passed that message-supplied string through CamelContext.resolvePropertyPlaceholders() before using it. Property-placeholder resolution is a configuration-resolution facility, not a URI-parsing step: it reaches operating-system environment variables, JVM system properties, every PropertiesFunction registered on the classpath - including the secret functions - and, through camel-bean, the invocation of a no-argument method on any bean in the registry. Applying it to Exchange content therefore turned a URI string into a configuration- and bean-evaluation context. A route author opted into none of this: a plain static to("http://backend/api") was sufficient. Seven call sites were affected: HttpHelper.createURL and HttpHelper.createMethod in camel-http-common, HttpMethodHelper.createMethod in camel-http, VertxHttpHelper.resolveHttpURI in camel-vertx-http, UndertowHelper.createURL and UndertowHelper.createMethod in camel-undertow, and NettyHttpHelper.createURL in camel-netty-http. The bridgeEndpoint option did not bound the exposure: it suppresses the CamelHttpUri override in the createURL family but not in the createMethod family, so a route using the documented bridging configuration still resolved placeholders taken from the header, and CamelRestHttpUri was consumed before any bridgeEndpoint check in all four components. Only camel-http offered an opt-out, skipControlHeaders, which defaults to false. Reaching the headers did not always require header injection, because several Camel HTTP consumers populate CamelHttpUri from the request line themselves as a documented reverse-proxy feature. An unresolvable placeholder additionally produced a RuntimeExchangeException whose message echoed the URI, which distinguishes a set from an unset configuration key even where no outbound request is made. The behaviour predates the 4.x line. This advisory continues the alignment CAMEL-24282 applied to the toD and enrich dynamic-URI EIPs in 4.22.0, extending the same build-time-resolution contract to the HTTP producer components. Users should upgrade to version 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x releases stream should upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, strip the override headers at the trust boundary before the producer with removeHeader("CamelHttpUri") and removeHeader("CamelRestHttpUri"), or set skipControlHeaders=true on camel-http endpoints, which is the only component offering that option. Note that bridgeEndpoint=true is not a workaround: it suppresses the header override when the outbound URL is built but not when the header is re-parsed for the query string. Percent-encoding the placeholder delimiters is likewise not a mitigation for camel-netty-http, whose binding decodes the request path before the value reaches the header, so proxy or WAF rules written against the raw delimiters do not help there. As defence in depth, ensure consumers exposed to untrusted senders apply a strict inbound HeaderFilterStrategy over the Camel namespace, and resolve secrets through a vault rather than through environment variables or system properties that a placeholder can name.

A flaw has been found in eremef bandcamp-player up to 1.8.33-beta. The impacted element is an unknown function of the file database.ts of the component Remote Control Server. Executing a manipulation of the argument remoteEnabled can lead to missing authentication. The attack may be launched remotely. Upgrading to version 1.8.34-beta is sufficient to resolve this issue. This patch is called ccba99b66bc61acf46e4a332034799d7452ddea6. Upgrading the affected component is advised.

Insertion of Sensitive Information into Log File vulnerability in Apache Answer. This issue affects Apache Answer: through 2.0.2. Full API keys are written to application logs on every authenticated request, allowing anyone with log-read access to recover and replay active bearer credentials. Users are recommended to upgrade to version 2.0.3, which fixes the issue.

MISP contains a vulnerability in its server settings lookup mechanism that allows an authenticated user to retrieve sensitive configuration data that should have been redacted. The settings lookup function resolves a dotted setting name to a node in the configuration tree. When a branch name (such as Security, MISP, or Plugin) is supplied instead of a specific leaf setting, the function returns the entire sub-tree. Because a branch node does not carry a redaction flag, the redaction check in the settings retrieval endpoint is bypassed, and the full branch contents are returned to the caller. This exposes sensitive values including the security salt, Redis connection passwords, and plugin API keys. A second endpoint that edits server settings similarly reads the entire configuration store when a branch name is resolved, returning all settings to the caller. The impact is disclosure of sensitive server configuration secrets to any user who can access the server settings endpoints. Affected versions: <2.5.48.

Deserialization of Untrusted Data vulnerability in ExpressTech Quiz And Survey Master quiz-master-next allows Object Injection.This issue affects Quiz And Survey Master: from n/a through 11.2.7.

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in PT Norther Lights Production MapSVG mapsvg-lite-interactive-vector-maps allows Path Traversal.This issue affects MapSVG: from n/a through 8.16.1.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Ays Pro Quiz Maker quiz-maker allows Reflected XSS.This issue affects Quiz Maker: from n/a through 6.7.1.91.

Path-confinement bypass during metadata backup deletion in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted. This issue affects Apache Kylin: from 4.0.0 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue.

SQL injection (SQLi) vulnerability—specifically a UNION-based vulnerability—in the Integratec application that affects the sInfo parameter sent via POST to the endpoint /login/ap_Login.aspx/start. Successful exploitation of this vulnerability could allow an attacker to steal data from the database, such as credentials and user information, and cause errors and partial denial-of-service conditions. Furthermore, this vulnerability could facilitate other types of follow-up attacks, such as data exfiltration or privilege escalation.

MISP contains an access control flaw in the proposal (shadow attribute) visibility logic. The authorization check accepted any attribute or object carrying one of the user's sharing groups without verifying the distribution level, and denied the owning organisation access to proposals on its own organisation-only attributes. - A user belonging to a sharing group could view proposals on attributes or objects with that sharing group, regardless of the attribute's distribution level (levels 1-3 should restrict visibility) - The owning organisation could not view proposals on its own org-only attributes Security impact: Unauthorized disclosure of proposed attribute changes to users who should not have access based on distribution level restrictions. Affected: <2.5.48

MobaXterm Personal Edition (Portable) 26.4 GA extracts the CygUtils64.plugin file without first verifying its integrity. A local attacker with write permissions on this file can replace the ‘bin/cygwin1.dll’ library contained within it with a malicious library. When the victim opens a Local Shell session or uses a Cygwin-based function, the application extracts the component and loads the tampered library, executing code with the victim’s permissions. Exploitation requires write access to the plugin and does not, in itself, involve privilege escalation.

VOCALOID6 Editor provided by Yamaha Corporation improperly restricts XML external entity references. Loading a specially crafted project file may the product to initiate unintended communication, potentially leading to the leak of sensitive information from the device where the product is installed or resulting in a denial-of-service (DoS) condition.

A security vulnerability in HPE Compute Scale-up Server 3200 and 3250 platforms, Superdome Flex and Superdome Flex 280 servers could be exploited remotely to execute arbitrary commands on the RMC.

A flaw was found in bootc and ostree. Already-staged deployments are finalized without revalidating the deployment's container image against the current containers signature policy. Unsigned OS content staged under a prior permissive policy can remain bootable after policy is hardened to reject unsigned images, leading to full host compromise on reboot.

A vulnerability was identified in sgl-project SGLang up to 0.5.19. This impacts the function Scheduler.expert_distribution_handle of the file python/sglang/srt/eplb/expert_distribution.py of the component Expert-Distribution Recording Endpoint. Such manipulation leads to denial of service. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The pull request to fix this issue awaits acceptance.

Brian Mariani from DigitalCanion SA has discovered a path traversal vulnerability in the View Logs functionality of koozali's SME Server version 11.0rc1-215 allowing an unauthenticated attacker to access files outside of the intended directory, leading to exfiltration of files located outside the intended system logs directory, including potentially sensitive system and application files.

在 openGauss-connector-jdbc 的 pgjdbc/src/main/java/org/postgresql/log/LogFactory.java 中，LogFactory 根据 JDBC 连接参数中的 logger 类名调用 Class.forName 加载类后，直接反射调用以 String 为参数的构造函数，再转换为 Log。缺少 asSubclass(Log.class) 校验，非 Log 实现类也会在类型检查前被实例化。因此，当攻击者可控制 JDBC URL 或连接属性中的 logger 类名，且客户端 classpath 中存在可被加载的类时，可能在客户端触发非预期的类加载与构造副作用。 此漏洞自 JDBC 1.1.0引入，影响 1.1.0 及之后的 2.x、3.x、5.x、6.x 各版本及补丁（含 6.0.0 分支最新 6.0.6），以及 7.0.0-RC1、7.0.0-RC2、7.0.0-RC3，并在 7.0.0-LTS 版本修复。修复在 Class.forName 之后先执行 asSubclass(Log.class)，仅允许 Log 子类进入构造。修复pr见https://gitcode.com/opengauss/openGauss-connector-jdbc/pull/423。

A security vulnerability has been detected in dotnet eShop up to 913acea66708a59595351174cee9b29f37179d29. The affected element is the function AddApplicationServices of the file src/Catalog.API/Extensions/Extensions.cs of the component Catalog API. The manipulation leads to improper authentication. The attack can be initiated remotely. The project was informed of the problem early through an issue report but has not responded yet.

在 openGauss-server 的 src/gausskernel/cbb/utils/hll/hll.cpp 中，内置函数 HllObjectUnpack() 存在长度校验缺陷。该函数从用户提供的 packed HLL 解析 lenUsed 与 lenTotal 后，仅检查输入长度足以覆盖 HLL_HEAD_SIZE + lenUsed，随后按 lenTotal 分配缓冲区、按 lenUsed 调用 memcpy_s() 拷贝输入，既未校验 lenTotal >= lenUsed，也将 memcpy_s() 目标大小写成 lenUsed 而非实际分配的 lenTotal，导致安全拷贝无法拦截越界写。hll_in()、hll_print()、hll_cardinality() 等 SQL 入口会走同一解包路径。因此，普通数据库连接用户只需构造 lenTotal 小于 lenUsed 的畸形 packed HLL（例如经 ::hll 进入 hll_in()），即可触发服务端堆越界写，存在内存破坏风险。此问题随 packed HLL 解包函数 HllObjectUnpack() 进入代码，v2.1.0 起即存在。受影响版本包括 2.1.0、3.0.x、3.1.x、5.0.x、5.1.0、6.0.x，以及 7.0.0-RC1、7.0.0-RC2、7.0.0-RC3。该问题已在 7.0.0-LTS 版本修复，通过在 HllObjectUnpack() 中补齐 lenUsed <= lenTotal 校验，并将 memcpy_s() 的目标大小改为实际分配的 lenTotal。修复 PR 见 https://gitcode.com/opengauss/openGauss-server/pull/9380 。

A vulnerability is in Web Server default connection ports under the process name GeoWebServer.exe .