Linux Linux vulnerabilities

In the Linux kernel, the following vulnerability has been resolved: nvme-fc: fix double free of fabrics options when nvme_add_ctrl() fails nvmf_create_ctrl() owns the fabrics options and frees them whenever ->create_ctrl() returns an error, so a transport must not free them on its own error paths. nvme-fc tracks this by testing ctrl->ctrl.opts in nvme_fc_ctrl_free(), which requires nvme_fc_init_ctrl() to clear that pointer on every error exit. The coupling is implicit, and commit 1a9e218195a5 ("nvme: split device add from initialization") broke it by adding a second error exit. When nvme_add_ctrl() fails, nvme_fc_init_ctrl() jumps to out_put_ctrl:, past the "ctrl->ctrl.opts = NULL" that only sits on the fail_ctrl: path, so nvme_fc_ctrl_free() frees the options and nvmf_create_ctrl() frees them a second time: BUG: KASAN: slab-use-after-free in nvmf_free_options+0x30/0x190 nvmf_free_options+0x30/0x190 drivers/nvme/host/fabrics.c:1284 nvmf_create_ctrl drivers/nvme/host/fabrics.c:1374 [inline] Freed by task 5534: nvme_fc_ctrl_free drivers/nvme/host/fc.c:2374 [inline] nvme_fc_init_ctrl+0xe17/0x1450 drivers/nvme/host/fc.c:3605 nvme_add_ctrl() fails when dev_set_name() cannot allocate, so this is reachable under memory pressure or fault injection. Without KASAN the options are freed twice. Rather than clear the pointer on the second exit as well, derive ownership the way nvme-tcp, nvme-rdma and nvme-loop do, from list membership: their free_ctrl leaves the options alone unless the controller made it onto the transport list. The list cannot simply be populated on the success path as it is there. nvme-fc runs the initial connect synchronously via flush_delayed_work(), and the controller has to be reachable on rport->ctrl_list for the whole of it: nvme_fc_unregister_remoteport() needs to find it to signal connectivity loss, nvme_fc_match_disconn_ls() matches an incoming Disconnect Association LS against ctrl->association_id, which is only assigned during that window, nvme_fc_resume_controller() needs it on remoteport re-registration, and nvme_fc_existing_controller() uses it to reject a duplicate connect racing the one in flight. Keep the insertion where it is and add a fail_unlist: label, falling into fail_ctrl:, for the error paths that run after it. The earlier error paths never reach the insertion and keep using fail_ctrl: directly, so the list is only touched where the controller is actually on it. nvme_fc_ctrl_free() cannot use the plain "goto free_ctrl" the other transports use, because it still has to put_device(), release the rport reference and free the ida entry for resources taken before the insertion. Sample list_empty() under rport->lock instead. ctrl->ctrl.opts also stays valid for the whole teardown now. That is not the bug being fixed, but it removes some fragility around the old idiom: nvme_free_ctrl() calls nvme_auth_free() before ->free_ctrl(), and ctrl_max_dhchaps() dereferences ctrl->opts without a NULL check when ctrl->dhchap_ctxs is set, which nvme-fc permits since NVMF_ALLOWED_OPTS allows the dhchap options. The nvme sysfs attributes that dereference ctrl->opts, such as hostnqn and address, evaluate their is_visible() test once at device_add() time and stay readable until cdev_device_del().

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: check the data direction of a C2HData PDU nvme_tcp_handle_c2h_data() finds the request by command id and checks that it has a payload, but it does not check that the command asked for data to be read. A controller that answers a write command with C2HData therefore reaches nvme_tcp_recv_data(), where _copy_to_iter() hits WARN_ON_ONCE(i->data_source) and returns 0. The receive path turns that into -EFAULT and resets the controller. No data is copied, so this is not memory corruption. What a controller gets is a kernel warning it can raise at will, which is fatal on a host booted with panic_on_warn. The send path already knows the direction - it consults rq_data_dir() when it builds a command - and nvme_tcp_handle_r2t() checks the length and the offset of the request it names. The C2HData path does not check the direction at all. Reject a C2HData PDU whose command is not a read. Rejecting it fails the command and resets the controller, as the neighbouring check in this function does; what goes away is the warning. [ 6.885580] ------------[ cut here ]------------ [ 6.886457] WARNING: lib/iov_iter.c:193 at _copy_to_iter+0x289/0x1330, CPU#0: kworker/0:1H/71 [ 6.888137] CPU: 0 UID: 0 PID: 71 Comm: kworker/0:1H Not tainted 7.2.0-rc5-NVMETCP-gf5098b6bae76 #1 PREEMPT(lazy) [ 6.891165] Workqueue: nvme_tcp_wq nvme_tcp_io_work [ 6.891875] RIP: 0010:_copy_to_iter+0x289/0x1330 [ 6.903739] Call Trace: [ 6.904085] <TASK> [ 6.909254] __skb_datagram_iter+0x433/0x820 [ 6.911026] skb_copy_datagram_iter+0x37/0x120 [ 6.911622] nvme_tcp_recv_skb+0xa07/0x4320 [ 6.913378] __tcp_read_sock+0x1ab/0x810 [ 6.915788] nvme_tcp_try_recv+0x152/0x1e0 [ 6.918222] nvme_tcp_io_work+0x1e4/0x6c0 [ 6.926906] </TASK> [ 6.927226] ---[ end trace 0000000000000000 ]--- [ 6.927878] nvme nvme0: queue 1 failed to copy request 0x71 data [ 6.928709] nvme nvme0: receive failed: -14

In the Linux kernel, the following vulnerability has been resolved: nvme: skip the zoned limits update if the zone info query failed nvme_query_zone_info() returns either a negative errno or a positive NVMe status code, but nvme_update_ns_info_block() only tests for the negative case: ret = nvme_query_zone_info(ns, lbaf, &zi); if (ret < 0) goto out; If the device fails the Identify Namespace (I/O Command Set specific) command, or the Identify Controller command issued by nvme_set_max_append(), the positive status falls through and setup continues with the zero-initialized zone info. nvme_update_zone_info() then marks the queue zoned with chunk_sectors and ns->head->zsze set to zero. blk_validate_zoned_limits() does not check chunk_sectors, so the limits commit succeeds. blk_revalidate_disk_zones() does reject the zero zone size, but by then the limits are live and nothing rolls them back, so I/O keeps being submitted to a zoned queue with a zero zone size and disk_zone_no() shifts by ilog2(0): nvme0n1: Invalid non power of two zone size (0) UBSAN: shift-out-of-bounds in include/linux/blkdev.h:747:16 shift exponent -1 is negative disk_zone_no include/linux/blkdev.h:747 [inline] bio_straddles_zones include/linux/blkdev.h:1058 [inline] blk_zone_wplug_handle_write block/blk-zoned.c:1423 [inline] blk_zone_plug_bio.cold+0x25/0x1c8 block/blk-zoned.c:1605 blk_mq_submit_bio+0x18fb/0x2870 block/blk-mq.c:3196 submit_bh_wbc+0x575/0x740 fs/buffer.c:2824 __block_write_full_folio+0x728/0xdd0 fs/buffer.c:1933 Any device, firmware or NVMe-oF target that fails this one command reaches this. Skip the zoned limits update in that case, and log which of the two things happened: during a revalidation the queue keeps the zone geometry it was last validated with, and on a first scan the namespace is registered without zoned limits, so that it is still available as a handle for admin commands. Neither of the paths in nvme_query_zone_info() that return a positive status logs anything, so the failure would otherwise be silent. zi.zone_size is an exact indicator: every path that returns a positive status returns before it is assigned, and after that the only failure left is -ENODEV, which the caller already handles. Found by FuzzNvme.

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: reject unsolicited H2CData PDUs nvmet_tcp_handle_h2c_data_pdu() accepts an H2CData PDU after only checking that its TTAG is a valid in-range command index and that the command's data buffers are mapped. It never checks that the target has actually solicited that data by sending an R2T for the command. A remote host can abuse this. It submits a write command that takes the R2T path and, before the target transmits the R2T, sends an H2CData PDU for that command's tag. The data completes the command early, and when the command then fails synchronously (e.g. a length mismatch caught by nvmet_check_transfer_len()), it is completed a second time. Each completion calls nvmet_tcp_queue_response(), so the same command is added to queue->resp_list twice while it is still linked; the second llist_add() makes the node point to itself (lentry->next == lentry). nvmet_tcp_process_resp_list() then walks that self-referential node and adds the command to resp_send_list twice. With CONFIG_DEBUG_LIST this trips the "list_add double add" check (kernel BUG); without it the loop never terminates and the nvmet_tcp workqueue wedges (soft-lockup). It is remotely triggerable and needs no authentication on an allow_any_host subsystem. Track whether an R2T has been transmitted for a command and reject an H2CData PDU that arrives before it. The flag is cleared on command reuse (nvmet_tcp_get_cmd() zeroes cmd->flags) and stays set across the multiple H2CData PDUs of a single solicited transfer.

In the Linux kernel, the following vulnerability has been resolved: mm/migrate_device: avoid out-of-bounds writes for compound folios migrate_device_range() and migrate_device_pfns() clear the entries following a compound folio so that the PFN arrays retain their page-granular representation. If a compound folio extends beyond the end of the caller-provided range, the loops clear all following folio entries without limiting them to the number of slots remaining in the npages-sized array, causing an out-of-bounds write. Do not proceed with a compound folio if its page-granular representation does not fit entirely in the remaining PFN array. If this happens, drop any reference and lock acquired for the folio, clear the remaining entries, and stop collecting. Observed with a KASAN x86 QEMU kernel using the HMM migrate_anon_huge_zero selftest. Closing /dev/hmm_dmirror0 after migrating an anonymous huge page to device memory exercises: dmirror_fops_release() -> dmirror_device_evict_chunk() -> migrate_device_range()

In the Linux kernel, the following vulnerability has been resolved: nvdimm/btt: reject an arena whose nfree is below the lane count The BTT info block's nfree field, the number of reserve free blocks, is read from the medium without validation. btt_freelist_init() and btt_rtt_init() size the per-lane freelist[] and rtt[] arrays by nfree, but the I/O path indexes them by the lane from nd_region_acquire_lane(), which is bounded by nd_region->num_lanes (ND_MAX_LANES), not by nfree. A crafted or foreign arena whose nfree is below the lane count makes freelist[lane]/rtt[lane] run past the allocation: an out-of-bounds write. btt.rst documents the nlanes = min(nfree, num_cpus) invariant, which the code does not currently honor: num_lanes is ND_MAX_LANES regardless of nfree. Reject an arena whose nfree is below num_lanes at discovery, before the per-lane arrays are allocated, enforcing that invariant.

In the Linux kernel, the following vulnerability has been resolved: powerpc/mm: fix wrong addr_pfn tracking in compound vmemmap population vmemmap_populate_compound_pages() uses addr_pfn to determine the PFN offset within a compound page and to decide whether the current vmemmap slot should be populated as a head page mapping or should reuse a tail page mapping. However, addr_pfn is advanced manually in parallel with addr. The loop itself progresses in vmemmap address space, so each PAGE_SIZE step in addr covers PAGE_SIZE / sizeof(struct page) struct page slots. Since addr_pfn is compared against nr_pages in data-PFN units, it should advance by the same number of PFNs. The existing manual increments do not match that and therefore do not reliably track the PFN corresponding to the current addr. As a result, pfn_offset can be computed from the wrong PFN and the code can make the head/tail decision for the wrong compound-page position. Fix this by deriving addr_pfn directly from the current vmemmap address instead of carrying it as loop state.

In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: fix stale pqap_hook pointer on error in vfio_ap_mdev_set_kvm() In vfio_ap_mdev_set_kvm(), kvm->arch.crypto.pqap_hook is set to &matrix_mdev->pqap_hook before the update locks are acquired and the mdev list is checked for a conflicting assignment. If another mdev is already attached to the same KVM instance, the function returns -EPERM without restoring the hook pointer, leaving kvm->arch.crypto.pqap_hook pointing at the failing matrix_mdev instead of the mdev that legitimately owns the KVM. Since matrix_mdev->kvm is never set on this error path, vfio_ap_mdev_unset_kvm() will not clean up the hook when matrix_mdev is later closed. If matrix_mdev is subsequently freed, any PQAP instruction executed by the guest will dereference the stale pointer through pqap_hook_rwsem, resulting in a use-after-free. Since kvm->arch.crypto.pqap_hook is only set in the vfio_ap_mdev_set_kvm() function and is cleared in the vfio_ap_mdev_unset_kvm() function, a check for 'kvm->arch.crypto.pqap_hook != NULL' is all that is needed to determine whether it belongs to another mdev. This will alleviate the need to iterate the matrix_dev->mdev_list list to see if the kvm object is assigned to another mdev.This was introduced in v3 to alleviate the need to take the mdevs_lock while iterating the list; however, this did not prevent a potential race condition. The pqap_hook_rwsem(write) is now performed inside get_update_locks_for_kvm(), which is updated to acquire pqap_hook_rwsem(write) between kvm->lock and mdevs_lock. This ordering is consistent with the PQAP intercept path, which acquires pqap_hook_rwsem in read mode while srcu is held under vcpu->mutex, establishing the dependency: kvm->lock -> vcpu->mutex -> srcu -> pqap_hook_rwsem(read). The pqap_hook_rwsem is now released inside the release_update_locks_for_kvm(), which is updated to release pqap_hook_rwsem(write) between mdevs_lock and kvm->lock. Additionally, kvm_put_kvm() in vfio_ap_mdev_unset_kvm() is moved after release_update_locks_for_kvm(). Previously it was called while kvm->lock was held; if it were ever the last reference, kvm_destroy_vm() would run under kvm->lock, which would deadlock.

In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix control domain removal in vfio_ap_mdev_cfg_remove The vfio_ap_config_remove function uses the bitmap_andnot function to clear bits from the matrix_mdev->matrix.adm bitmap (specifies the control domains assigned to the mdev). This prevents the explicitly unplugged control domains from being removed the KVM guest. The bitmap_and function is used instead.

In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix hot-unplug skipped when last AP adapter or domain removed The vfio_ap_mdev_hot_unplug_cfg() function uses the return value of bitmap_andnot() to determine whether the guest APCB needs to be updated. However, bitmap_andnot() returns false when the resulting destination bitmap is empty. This means that if the only adapter, domain or control domain assigned to an mdev is removed from the host's AP configuration, the bit is correctly cleared from the shadow APCB, but bitmap_andnot() returns false because the result is an empty bitmap. Consequently, do_hotplug remains 0 and vfio_ap_mdev_update_guest_apcb() is never called, leaving the KVM guest with stale hardware access to the unplugged AP devices. Fix this by replacing the bitmap_andnot() return value check with bitmap_intersects() to determine whether the shadow APCB actually overlaps with the removal mask. If there is an intersection, call bitmap_andnot() solely for its side effect of clearing the bits, then unconditionally set do_hotplug to trigger the guest APCB update.

In the Linux kernel, the following vulnerability has been resolved: mtd: afs: validate v2 image info bounds The AFS v2 parser uses footer[8] to locate the image information block inside the current erase block, then uses the image information region_count to walk entries from a fixed local array. The footer offset and region count come from flash contents and are not checked against the erase block or the local image-info array before use. Reject v2 entries whose image information offset would underflow the erase block calculation, and reject region counts that cannot fit in the local image-info array before walking region entries.