Linux vulnerabilities

In the Linux kernel, the following vulnerability has been resolved: afs: handle CB.InitCallBackState3 requests without a server record The cache manager callback path now attaches the server record to an incoming call through the rxrpc peer's app data. That association is not guaranteed to exist for every callback request, and most callback handlers already tolerate that case. Make CB.InitCallBackState3 follow the same pattern by checking whether a server record was attached before using it. If the peer is not mapped to a server record, trace the request and ignore it, matching the existing behaviour for other unmatched callback requests. This keeps the callback handler consistent with the rest of the cache manager service and avoids depending on peer state that may not be available for a given request.

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Adjust size for copy_to_user() The amount of data returned to user space should be limited by the buffer size provided by the application. If the buffer is smaller than the data size, return only the portion that fits instead of failing.

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix integer overflow in radeon_align_pitch() radeon_align_pitch() has the same kind of overflow issue as the old amdgpu helper: both the alignment round-up add and the final 'aligned * cpp' calculation can overflow signed int. If that wraps, radeon_mode_dumb_create() can end up returning an invalid pitch or creating a zero-sized dumb buffer. Fix this by using check_add_overflow() for the alignment round-up and check_mul_overflow() for the final pitch calculation, returning 0 on overflow. Also reject zero pitch and size in radeon_mode_dumb_create(). Found via AST-based call-graph analysis using sqry.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix wrong pci_get_drvdata type in AER handlers rtw89 stores an ieee80211_hw pointer via pci_set_drvdata() at probe time, but io_error_detected() and io_resume() retrieve it as a net_device pointer. This causes netif_device_detach/attach to operate on an ieee80211_hw struct, reading and writing at wrong offsets. The adjacent io_slot_reset() already does it correctly. Use ieee80211_stop_queues/wake_queues instead, consistent with every other queue stop/start path in the driver. Tested on RTL8852CE by calling the handlers from a test module before and after the fix.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix wrong pci_get_drvdata type in AER handlers rtw88 stores an ieee80211_hw pointer via pci_set_drvdata() at probe time, but io_error_detected() and io_resume() retrieve it as a net_device pointer. This causes netif_device_detach/attach to operate on an ieee80211_hw struct, reading and writing at wrong offsets. Use ieee80211_stop_queues/wake_queues instead, consistent with every other queue stop/start path in the driver.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: Correct data type for scan index to avoid infinite loop A kernel soft lockup was observed during Wi-Fi scanning on the 6GHz band. The CPU becomes stuck in rtw89_hw_scan_add_chan_ax for over 20 seconds, leading to a system panic. RIP points to 0f b6 c3 (movzbl %bl, %eax), which zero-extends the low 8 bits of RBX into RAX. RBX (the counter i) has reached a huge value: 0x137466a1. watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [kworker/u16:4:6124] Workqueue: events_unbound cfg80211_wiphy_work [cfg80211] RIP: 0010:rtw89_hw_scan_add_chan_ax+0xb3/0x6e0 [rtw89_core] Code: a0 48 89 45 a8 44 89 6d 9c 44 89 75 98 eb 29 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 c3 01 <0f> b6 c3 41 3b 44 24 74 0f 83 0b 02 00 00 0f b6 c3 48 8d 14 80 49 RSP: 0018:ffffcb48cbaa39f8 EFLAGS: 00000202 RAX: 0000000000000005 RBX: 00000000137466a1 RCX: 0000000000000000 RDX: ffff89ffc9d851a8 RSI: 0000000000004f0d RDI: 0000000096af0130 RBP: ffffcb48cbaa3a60 R08: 0000000000000000 R09: ffff8a00b7502080 R10: ffff8a00b75ff600 R11: 0000000000000000 R12: ffff89ffc7553870 R13: ffff8a00b7ac8f19 R14: ffff8a00b75020d8 R15: ffff89ffc3d54d80 FS: 0000000000000000(0000) GS:ffff8a014f962000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007558d7f9f4c4 CR3: 0000000178040001 CR4: 00000000001706f0 Call Trace: <TASK> rtw89_hw_scan_prep_chan_list_ax+0x8a/0x400 [rtw89_core] rtw89_hw_scan_start+0x546/0x8a0 [rtw89_core] ? rtw89_fw_h2c_default_cmac_tbl+0x13c/0x1f0 [rtw89_core] rtw89_ops_hw_scan+0xae/0x120 [rtw89_core] drv_hw_scan+0xbb/0x180 [mac80211] __ieee80211_start_scan+0x2fc/0x750 [mac80211] ieee80211_request_scan+0xe/0x20 [mac80211] ieee80211_scan+0x123/0x190 [mac80211] rdev_scan+0x40/0x110 [cfg80211] cfg80211_scan_6ghz+0x5a1/0xa30 [cfg80211] By objdump with source: for (i = 0; i < req->n_6ghz_params; i++) { 5fbc0: 83 c3 01 add $0x1,%ebx --> i++ 5fbc3: 0f b6 c3 movzbl %bl,%eax --> get counter fbc6: 41 3b 44 24 74 cmp 0x74(%r12),%eax * RBX: 00000000137466a1 -> %bl = a1 -> EAX = 000000a1 (161)

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix OOB read from firmware RX descriptor exceeding DMA buffer In rtw_pci_rx_napi(), new_len is computed as the sum of pkt_len (14-bit descriptor field, max 16383) and pkt_offset (drv_info_sz + shift, both firmware-controlled). The result can exceed RTK_PCI_RX_BUF_SIZE (11478), causing an out-of-bounds read from the pre-allocated DMA buffer when skb_put_data copies new_len bytes. The USB transport already validates this (rtw_usb_rx_data_put checks against RTW_USB_MAX_RECVBUF_SZ); the PCIe path does not. Add a check that new_len does not exceed the DMA buffer size.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: add bounds check on firmware mac_id in link lookup The mac_id field in RX descriptors is 8 bits wide (0-255), but assoc_link_on_macid[] has only RTW89_MAX_MAC_ID_NUM (128) entries. While the driver currently assigns mac_id values below 128, the descriptor value comes from firmware and is not validated before use as an array index. Add a defensive bounds check in rtw89_assoc_link_rcu_dereference() to guard against out-of-range firmware values.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: fix OOB access from firmware tx status queue ID ath_tx_edma_tasklet() accesses sc->tx.txq[ts.qid] where ts.qid is a 4-bit hardware field (0-15), but the txq array only has ATH9K_NUM_TX_QUEUES (10) entries. A qid >= 10 causes an OOB array access. Add a bounds check on ts.qid before using it as an array index.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: cancel SSR work items during PCI shutdown A reboot can crash the kernel if it overlaps with WLAN firmware crash recovery (SSR). The crash is a NULL pointer dereference in the MHI teardown path while freeing DMA-backed MHI contexts. Simplified trace: dma_free_attrs mhi_deinit_dev_ctxt [mhi] ath11k_pci_power_down [ath11k_pci] ath11k_pci_shutdown [ath11k_pci] device_shutdown kernel_restart On the host side, SSR is driven by the MHI RDDM callback, which queues reset_work to perform device recovery. reset_work power-cycles the device by calling ath11k_hif_power_down() followed by ath11k_hif_power_up(). The power-down phase deinitializes MHI and frees DMA resources. Shutdown/reboot runs fully asynchronously with this RDDM-driven SSR recovery flow. As a result, the shutdown path (ath11k_pci_shutdown() -> ath11k_pci_power_down()) can race with the SSR recovery sequence. Fix this by canceling SSR-related work items during PCI shutdown, marking the device as unregistering, and serializing the RDDM callback path that checks and queues reset_work. This ensures that no new SSR recovery work can be queued once teardown has started, and that any in-flight recovery work is fully synchronized before device power-down, preventing MHI teardown and DMA resource freeing from running more than once. Note: This issue only affects PCI/MHI-based devices. AHB-based ath11k devices do not queue reset_work in normal SSR flows. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04866.5-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1

In the Linux kernel, the following vulnerability has been resolved: OPP: Fix race between OPP addition and lookup A race exists between dev_pm_opp_add_dynamic() and dev_pm_opp_find_freq_exact(): CPU0 (add) CPU1 (lookup) ------------------------------- ------------------------------ _opp_add() mutex_lock() list_add(&new_opp->node, head) mutex_unlock() _opp_table_find_key() mutex_lock() dev_pm_opp_get(opp) kref_get() mutex_unlock() kref_init(&new_opp->kref) dev_pm_opp_put() kref_put_mutex() The newly added OPP is inserted into the list before its kref is initialized. A concurrent lookup can find this OPP and increment its reference count while it is still uninitialized, leading to refcount corruption and a potential premature free. Fix this by initializing ->kref and ->opp_table before making the OPP visible via list_add(). This ensures any concurrent lookup observes a fully initialized object. [ Viresh: Updated commit log ]

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix snp_filter_reserved_mem_regions() off-by-one Sashiko notes: > regarding the bounds check in snp_filter_reserved_mem_regions() > called via walk_iomem_res_desc(): does the check > if ((range_list->num_elements * 16 + 8) > PAGE_SIZE) > allow an off-by-one heap buffer overflow? > > If range_list->num_elements is 255, 255 * 16 + 8 = 4088, which is <= 4096. > Writing range->base (8 bytes) fills 4088-4095, but writing range->page_count > (4 bytes) would write to 4096-4099, overflowing the kzalloc-allocated > PAGE_SIZE buffer. Fix this by accounting for the entry about to be written to, in addition to the entries that are already allocated.

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Check for page allocation failure correctly in TIO Sashiko notes: > if __snp_alloc_firmware_pages() returns NULL under memory pressure, is it > safe to pass it directly to page_address()? > > On architectures without HASHED_PAGE_VIRTUAL, page_address(NULL) might > compute a deterministic but invalid, non-zero virtual address. The > subsequent if (tio_status) check would then evaluate to true, and > sev_tsm_init_locked() would dereference the invalid pointer. Indeed, page_address(NULL) will return non-NULL garbage here. Fix this by checking the page allocation itself for NULL, not the resulting virtual address.