Vulnerabilidades do Linux Linux

In the Linux kernel, the following vulnerability has been resolved: net: qualcomm: rmnet: restore skb->dev on deaggregated frames rmnet_map_deaggregate() allocates each sub-frame with alloc_skb() and leaves skb->dev NULL. __rmnet_map_ingress_handler() assigns skb->dev = ep->egress_dev only on the data path, but a MAP command frame is dispatched to rmnet_map_command() before that, so rmnet_map_send_ack() runs netif_tx_lock(skb->dev) on a NULL device. An unprivileged user reaches this by unsharing a user+net namespace, creating an rmnet link over a tap device with INGRESS_DEAGGREGATION and INGRESS_MAP_COMMANDS, and writing an aggregated frame carrying a flow-control command to the tap fd. Restore the assignment dropped by 378e25357ac7, so every skb leaving rmnet_map_deaggregate() has a valid device. BUG: KASAN: null-ptr-deref in _raw_spin_lock (kernel/locking/spinlock.c:158) Write of size 4 at addr 00000000000004b4 by task exploit/144 Call Trace: _raw_spin_lock (kernel/locking/spinlock.c:158) netif_tx_lock (net/sched/sch_generic.c:497) rmnet_map_command (drivers/net/ethernet/qualcomm/rmnet/rmnet_map_command.c:67) rmnet_rx_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:125) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6103) ... __netif_receive_skb_one_core (net/core/dev.c:6214) netif_receive_skb (net/core/dev.c:6474) tun_get_user (drivers/net/tun.c:1966) tun_chr_write_iter (drivers/net/tun.c:2012) vfs_write (fs/read_write.c:687) ksys_write (fs/read_write.c:739) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Kernel panic - not syncing: Fatal exception in interrupt

In the Linux kernel, the following vulnerability has been resolved: vxlan: vnifilter: enforce exact length of GROUP/GROUP6 attributes The VXLAN VNI filter entry policy declares the GROUP/GROUP6 address attributes as NLA_BINARY with only a maximum length, so validate_nla() accepts a payload shorter than the address. The GROUP consumer reads it with nla_get_in_addr(), an unconditional 4-byte load, so a short attribute over-reads up to 3 bytes of uninitialised slab data, which are stored into remote_ip and echoed back via RTM_GETTUNNEL, disclosing kernel memory. Switch both entries to NLA_POLICY_EXACT_LEN() so the validator rejects any GROUP/GROUP6 that is not exactly 4 / 16 bytes; a valid address is always sent at full width.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip Update HDCP Config In Transition State Transition state does not have a valid dm_stream_ctx that should skip configuring HDCP routine. The routine is valid to go through only when a valid stream is created.

In the Linux kernel, the following vulnerability has been resolved: btrfs: write-protect folios during data writeback commit 095be159f3eb ("btrfs: unify folio dirty flag clearing") replaced the folio_clear_dirty_for_io() call in extent_write_cache_pages() with a plain folio_test_dirty() check. Besides clearing the dirty flag, folio_clear_dirty_for_io() also calls folio_mkclean(), which write-protects the shared mmap PTEs mapping the folio. Note that we still do call folio_clear_dirty_for_io() later in submit_one_sector() when we clear dirty on the last sector of the folio (the only sector for non-subpage cases). But we lost this early call in extent_write_cache_pages(). Without the extra write-protection, a process with the file mmap-ed can modify a sector while it is being used by writeback in a way that expects a stable folio (checksumming, compressing, copying, etc...) without faulting, which manifests as a handful of concrete bugs. 1. For large folios or subpage sectorsize, it is possible to submit a bio which does not cover the whole folio. When this happens, we will have a bio in flight for a folio that we have *not* called folio_clear_dirty_for_io() on. If a task with an existing mmap-ed PTE writes (without faulting..) in this window, it can result in corruptions. If the write arrives while the checksumming or writing itself is underway, this can result in an invalid checksum and later corruption reports on read. If the write arrives after checksumming/writing is done but before the last sector dirty is cleared, then the write is present in page cache but doesn't affect the dirty tracking and will be lost when the folio is fully finished being submitted and the dirty bit is cleared. This results in losing the write even if fsync() is called. 2. For zoned submissions which are done in batch separate from the main extent_writepage() loop, we also risk csum violations for those submissions. Zoned writes are clamped to max_zone_append_size and are not aligned with folios, so a submission can span two folios. The first folio being processed in extent_write_cache_pages() will call extent_write_locked_range() which will submit the partial range of the next folio, while the rest of that folio could still be dirty. So clearing dirty on the submitted sectors doesn't call folio_clear_dirty_for_io() and we have the same issue. Since extent_write_cache_pages() skips these batch submitted folios (they are already marked for writeback from submission by the preceding folio), we must add the extra write protection in lock_delalloc_folios(). 3. For inline extents this will subtly risk losing writes that happen after/while we copy the inline extent but before we clear dirty on the folio. 4. For folios spanning EOF, mmap could tamper with the zeroed bytes past EOF and cause them to be persisted where future faults would improperly see them instead of zeros. 5. Finally, for compressed extents, we risk modifying the folios while we work on compressing them which will result in corrupted compressed data. Specifically, in run_delalloc_compressed() we queue up work to do compress_file_range() in BTRFS_COMPRESSION_CHUNK_SIZE (512K) chunks which will call btrfs_folio_clamp_clear_dirty() on the range. For non-subpage, this will always clear the whole folio, safely. For subpage, we risk a partial clear here as well. In particular, imagine a 2M folio broken up into 512K chunks of work which might start compression work on one chunk before all the chunks compress_file_range() workers have gotten far enough to finish clearing all the dirty bitmaps of the folio and getting to folio_clear_dirty_for_io(). Large folios on the edges of submission ranges are similarly at risk to be only partly cleared. This particular gap was introduced by a second patch in the same series: commit a4ef54dbb576 ("btrfs: make extent_range_clear_dirty_for_io() to handle sector size < page size cases") We cannot simply restore the call to folio_clear ---truncated---

In the Linux kernel, the following vulnerability has been resolved: iomap: don't free integrity payload that doesn't exist fs_bio_integrity_alloc might not allocate a bio integrity payload if PI verification is disabled on the block device. Check for that case before calling fs_bio_integrity_free in iomap_bio_read_folio_range_sync to avoid a NULL pointer dereferences. Make the branch cover the PI verification as well - while fs_bio_integrity_verify works without an integrity payload, it requires one to actually do useful work.

In the Linux kernel, the following vulnerability has been resolved: fs: fix user path of nested backing files backing_file_open() derives the path to be stored in the new backing file from user_file->f_path. This is incorrect when user_file itself is a backing file, which is the case for nested stacking filesystems, e.g. overlayfs mounts where the lowerdir of one overlayfs is the merged directory of another. Since commit def3ae83da02 ("fs: store real path instead of fake path in backing file f_path") the f_path of a backing file holds the real path of the intermediate layer, not the path that the user opened. Commit 924577e4f6ca ("ovl: Fix nested backing file paths") fixed this for such configurations by passing file_user_path() from ovl_open_realfile(). However, commit 6af36aeb147a ("lsm: add backing_file LSM hooks") changed the first argument of backing_file_open() from the user path back to the user file and derived the path from user_file->f_path again, silently re-introducing the problem. As a result, files mapped through a nested overlayfs show the wrong path in /proc/<pid>/maps and in perf/ftrace mmap records. For example, with two nested overlayfs mounts: mkdir -p /ovl/{lower,upper,work,merged} /ovl/nested echo hello > /ovl/lower/foo mount -t overlay overlay \ -o lowerdir=/ovl/lower,upperdir=/ovl/upper,workdir=/ovl/work \ /ovl/merged # at least two lowerdirs are needed when upperdir is nonexistent mount -t overlay overlay \ -o lowerdir=/ovl/merged:/ovl/lower /ovl/nested mapping /ovl/nested/foo shows a disconnected path instead of the user path: # readlink /proc/self/fd/3 /ovl/nested/foo # grep foo /proc/self/maps 7f6e2c100000-7f6e2c101000 r--s 00000000 00:24 15813027 /foo The bogus path is derived from the f_path of the intermediate backing file, whose mount is a private clone that d_path() cannot resolve. Fix this by using file_user_path(), which returns the outermost user-visible path for backing files and falls back to &user_file->f_path for regular files. This restores the behavior of commit 924577e4f6ca ("ovl: Fix nested backing file paths") for overlayfs and also fixes the same problem for the other backing_file_open() callers, fuse passthrough and erofs ishare, when their user file is itself a backing file. backing_tmpfile_open() has the same pattern but is not affected: it is only called by ovl_create_tmpfile() for the upper layer, and another overlayfs is rejected as upperdir by the DCACHE_OP_REAL check in ovl_mount_dir_check(), so its user_file can never be a backing file.

In the Linux kernel, the following vulnerability has been resolved: pidfd: hold exec_update_lock around namespace ioctl The PIDFD_GET_*_NAMESPACE ioctls in pidfd_ioctl() perform a filesystem credentials ptrace access check before handing out a namespace file descriptor. The accompanying comment states that the code "mirrors nsfs behavior", but, unlike the corresponding procfs paths, it does so without holding the target task's exec_update_lock. proc_ns_get_link() and proc_ns_readlink() both take exec_update_lock for reading around the ptrace check and the namespace lookup, so that the credentials used for the access decision match those of the task when its namespace is read. Without it, a caller can pass the check against the target's old credentials and then read the namespace after the target has execve()'d a setuid binary and committed new credentials -- accessing namespace information it should have been denied. Hold exec_update_lock for reading around the ptrace check and the namespace lookup so that pidfd truly mirrors nsfs behavior, as the comment already claims. open_namespace() itself runs outside the lock: once a namespace reference is obtained it carries its own refcount and is opened with the caller's own credentials, so a concurrent execve() on the target can no longer affect the outcome.

In the Linux kernel, the following vulnerability has been resolved: timers/itimer: Zero-init old itimerval before copy to userspace On native sparc64, struct __kernel_old_timeval contains a four-byte hole after tv_usec because tv_sec is 64-bit while __kernel_suseconds_t is 32-bit. put_itimerval() fills only the named fields in a stack-allocated __kernel_old_itimerval and copies the entire object to userspace, so getitimer() can expose the two padding holes. Zero-initialize the aggregate before assigning the fields so implicit padding is deterministic before it crosses the user/kernel boundary.

In the Linux kernel, the following vulnerability has been resolved: mm/kmemleak: avoid soft lockup when scanning task stacks Patch series "mm/kmemleak: avoid soft lockup when scanning task", v3. kmemleak_scan() scans every task stack under one rcu_read_lock() with no reschedule point, which can trip the soft lockup watchdog on hosts with very many threads. That prints the following message, depending on the workload+host configuration: watchdog: BUG: soft lockup - CPU#35 stuck for 22s! [kmemleak:537] scan_block kmemleak_scan kmemleak_scan_thread kthread Patch 1 walks the tasks with find_ge_pid() so the scan reschedules between tasks Patches 2-3 let the scan loops stop early once a scan is interrupted. This patch (of 3): kmemleak_scan() walks every thread and scans its kernel stack under a single rcu_read_lock() with no reschedule point. On a host with very many threads -- amplified by KASAN/lockdep in debug builds -- this loop can hog a CPU long enough to trip the soft lockup watchdog: watchdog: BUG: soft lockup - CPU#35 stuck for 22s! [kmemleak:537] scan_block kmemleak_scan kmemleak_scan_thread kthread A cond_resched() cannot be added directly: the loop runs inside an RCU read-side critical section. Walk the tasks one PID at a time with find_ge_pid(), taking the RCU read lock only to look up and pin each task. The stack is then scanned with no lock held, so cond_resched() runs between tasks and the scan stops early on scan_should_stop(). This follows the next_tgid()/task_seq_get_next() iteration pattern and keeps each RCU critical section short.